Dual‐band dual‐polarized hybrid aperture‐cylindrical dielectric resonator antenna for wireless applications

A dual‐band dual‐polarized hybrid aperture‐cylindrical dielectric resonator antenna (CDRA) is examined in this article. Inverted regular pentagon shaped aperture is not only used to launch two radiating hybrid modes (HEM_11δ and HEM_12δ mode) in CDRA but also act as a radiator. Out of two frequency bands, the lower frequency band is linearly polarized while upper frequency band is the combination of both circular and linear polarization. A circular polarization (CP) characteristic in upper frequency band is created by loading quarter annular stub with microstrip line. LHCP/RHCP can easily be controlled by alternating the position of quarter annular stub. It is operating over two frequency ranges i.e. 2.48‐2.98 GHz and 4.66‐5.88 GHz with the fractional bandwidth 18.31% and 23.14% respectively. Axial ratio bandwidth (3‐dB) is approximately 8.78% (4.9‐5.35 GHz) in upper frequency band. The proposed antenna design is suitable WiMAX (2.5/5.5 GHz) and WLAN (2.5/5.5 GHz) applications.     

Hybrid cylindrical dielectric resonator antenna with HE11δ and HE12δ mode excitation for wireless applications

In this article, dual mode triple band hybrid cylindrical dielectric resonator antenna (CDRA) for different wireless applications is investigated. It is seen that annular ring shaped patch along with T‐shaped printed line behaves as a magnetic and electric dipole concurrently and create HE_11δ and HE_12δ mode in the proposed CDRA. Both of the hybrid modes radiate in broadside direction. The concept of hybrid antenna (the combination of annular ring patch and CDRA) is used to achieve triple‐band feature in the proposed antenna. Ansoft HFSS‐EM simulator is used to optimize the proposed antenna. Optimized simulated results have been practically confirmed by using the archetype of proposed antenna. The proposed radiator is applicable in three different frequency bands, that is, 2.24‐2.56 GHz, 3.28‐4.18 GHz, and 5.36‐5.8 GHz. It is appropriate for WLAN (2.4/5.8 GHz) and WiMAX (2.5/3.3/5.5 GHz) applications.     

Dielectric resonator based two‐port dual band antenna for MIMO applications

This article investigates a dual band multiple input multiple output (MIMO) cylindrical dielectric resonator antenna (cDRA) for WLAN and WiMAX applications. It consists of two symmetrical orthogonally placed radiators. Each radiator is excited through a narrow rectangular aperture with the help of a microstrip line. For higher mode excitation, the proposed structure uses dual segment DRA which apparently looks like stacked geometry. The aperture fed dielectric resonator works as a feed for upper cDRA to generate higher order mode. The presented radiator covers the band between 3.3‐3.8 GHz and 5‐5.7 GHz. The measured isolation is better than 20 dB in the desired band. The average gain and radiation efficiency achieved for the proposed antenna is 6.0 dBi and 85%, respectively at the operating frequency band. In the proposed geometry, broadside radiation patterns are achieved by exciting HEM_11δ and HEM_12δ modes in a stacked geometry. Different MIMO performance parameters (ECC, DG, MEG, and CCL) are also estimated and analyzed. The prototype of proposed antenna is fabricated and tested. The measured outcomes are in good accord with the simulated one.     

Dual‐band circularly polarized dielectric resonator antenna for wireless applications

This letter investigates an integrated antenna configuration for WLAN/WiMAX applications. The proposed composite antenna configuration is simply the grouping of ring dielectric resonator along with reformed square‐shaped slot antenna. Three significant characteristics of proposed article are: (1) aperture act as magnetic dipole and excite HE_11δ mode in ring dielectric resonator antenna; (2) reforming of square aperture generates orthogonal modes in ring DRA and creates CP in lower frequency band; (3) annular‐shaped Microstrip line along with reformed square aperture creates CP wave in upper frequency band. With the purpose of certifying the simulated outcomes, prototype of proposed structure is fabricated and tested. Good settlement is to be got between experimental and software generated outcome. Experimental outcomes show that the proposed radiating structure is operating over 2 frequency bands that is, 2.88‐3.72 and 5.4‐5.95 GHz. Measured 3‐dB axial ratio bandwidth in lower and upper frequency band is approximately 9.52% (3.0‐3.4 GHz) and 5.85% (5.64‐5.98 GHz), respectively. These outcomes indicate that the proposed composite antenna structure is appropriate for WLAN and WiMAX applications.     

Hybrid wideband dual‐cylindrical circularly polarized dielectric resonator antennas excited with S‐shaped microstrip feed for sub‐6 GHz frequency range

In this article, a hybrid microstrip fed dual‐cylindrical dielectric resonator antenna (dual‐CDRA) has been proposed for the sub‐6 GHz band application with a wide circular polarization band. The proposed hybrid microstrip feed cylindrical dielectric resonator antenna utilizes an S‐shaped microstrip feed line to excite fundamental HE_11δ like mode and hybrid mode in dual‐CDRAs. The presented antenna structures are acting as monopole antenna separately with 48.75% (3.88‐6.38 GHz) bandwidth whereas both radiators called dual‐CDRAs enhances the bandwidth up to 93.06% (2.16‐5.92 GHz) in addition with an axial ratio bandwidth of 15.2% (3.52‐4.1 GHz). The proposed antenna is applicable for WiMAX (3.4‐3.69 GHz), and WLAN application of 802.11d and 8.02.11e IEEE standard. For validation of simulated results, an antenna prototype has been fabricated and experimentally verified. A good agreement between simulation and measured results are obtained. The simulation results have been carried out by using Ansys HFSS 14.0 version software.     

A dual‐band circularly polarized antenna with aid of dual cylindrical dielectric resonator blocks

In this communication, a dielectric resonator based circularly polarized antenna is designed and investigated. A modified aperture is used to excite dual cylindrical dielectric resonator (CDR) blocks. Two important characteristics of the proposed radiator that makes it all the more attractive are as follows: (i) excitation of dual radiating modes that is, HEM_11δ and TE_01δ mode in cylindrical DR along with the support of dual‐band circularly polarized (CP) waves; (ii) arrangements of dual CDR blocks to reduce the Q‐factor which is useful to enhance the impedance bandwidth of both frequency bands. Fabrication as well as experimental measurement of the antenna prototype has been done for verifying simulation outcomes. This antenna design operates over dual frequency bands, that is, 5.01‐6.41 GHz and 7.3‐7.9 GHz with the fractional bandwidth of 24.73% and 9.39%, respectively. It supports CP waves over the frequency range 6.1‐6.5 GHz and 7.4‐7.8 GHz. The proposed antenna backs right‐hand circularly polarized (RHCP) radiation with an average gain of 4.5 dBi. These characteristics make it well fitted for WLAN, WiMAX (5.2/5.5/5.8 GHz), and downlink defense purpose satellite communication (7.2‐7.7 GHz).     

Wideband circularly polarized concentric cylindrical dielectric resonator antenna excited by helix

In this paper, a wideband circularly polarized two-layer concentric cylindrical dielectric resonator antenna (CDRA) is proposed for C-band applications. To generate the circular polarization in the CDRA, the proposed antenna is excited with four turn helical wire. The helix excites the two orthogonal modes (HE_11δ) in quadrature phase, which result in the circular polarization. The four different design cases are investigated and the best one is fabricated and measured. The impedance bandwidth is improved when two-layer concentric CDRA is used. The simulated and measured bandwidth of the proposed antenna varies from 3.60 to 6.03 GHz with impedance bandwidth of 50.46% and 3.65 to 6 GHz (48.70% impedance bandwidth) respectively, while axial ratio impedance bandwidth are 43.13% (4.20–6.51 GHz) and 38.82% (4.40–6.52 GHz) respectively. The proposed antenna attains 10.9 dBi measured peak gain at 4.5 GHz. The fabricated prototype is experimentally measured and its results are found to be in good agreement with the simulation results.     

A new modified CPW‐fed wideband circularly polarized half‐split cylindrical dielectric resonator antenna with different permittivity of two layers in radial direction

In this article, a wideband circularly polarized half‐split cylindrical dielectric resonator antenna (HS‐CDRA) having two layers with different permittivity in radial direction is investigated. Designed antenna is excited by a new modified CPW fed which consists of signal line, helps to realization of circular polarization, half‐split cylindrical dielectric resonator (HS‐CDR), to confirm that circular polarization in proposed antenna. HS‐CDR is made of two different materials which can supports to enhance the input impedance bandwidth and 3‐dB axial ratio bandwidth. From the distributions of E‐fields in HS‐CDRA, it is observed that TM_11δ mode has been excited. To confirmed the circular polarization in proposed antenna, E‐field distribution on different phases (φ = 0º, 90º, 180º, and 270º) have been plotted. This antenna provides measured ?10 dB input impedance bandwidth of 25.94% (centered on 4.70 GHz) and 3‐dB axial ratio bandwidth in broadside direction of 17.34% (centered on 4.90 GHz). The average gain and radiation efficiency in working band are 1.56 dBi and 93.43% in broadside direction, respectively. CP radiation pattern shows that the proposed antenna has left hand circular polarization and this developed antenna could be useful for wireless applications like WLAN/Wi‐MAX bands.     

A compact proximity‐fed 2.4 GHz monostatic antenna with wide‐band SIC characteristics for in‐band full duplex applications

This article presents a dual polarized, proximity‐fed monostatic patch antenna (single radiator for both transmit and receive modes) with improved interport isolation for 2.4 GHz in‐band full duplex (IBFD) applications. The proximity‐fed radiating patch offers comparatively wider impedance bandwidth for presented design. Very nice self‐interference cancelation (SIC) levels for intended impedance bandwidth have been achieved through differential receive (R_x) mode configuration. The differential R_x mode based on 180° ring hybrid coupler acts as a signal inversion mechanism for effective suppression or cancelation of in‐band self‐interference (SI) that is, the leakage from transmit port. The implemented prototype of proposed antenna achieves ≥87 dB peak isolation for dual polarized IBFD operation. Moreover, the recorded interport isolation for validation model ≥60 dB within 10 dB‐return loss bandwidth of 90 MHz (2.36‐2.45 GHz). The measured radiation characteristics of implemented antenna demonstrate nice gain and low cross‐polarization levels for both transmit (T_x) and receive (R_x) modes. The dimensions of implemented antenna are 70 × 75 × 4.8 mm³. The novelty of this work is wide‐band SIC performance for monostatic antenna configuration with compact structure of presented design.     

Novel offset‐fed dual‐band aperture‐dipole composite antenna: Operating principle and design approach

Operating principle and design approach of a novel dual‐band aperture‐dipole composite antenna are proposed. It is shown that multiple operating modes can be simultaneously excited by employing offset‐feeding technique at first. After the behavior of each mode is studied, the operating principle of the antenna is analyzed and described. Then, an improved dual‐band aperture‐dipole composite antenna is formed and it is designed by using the proposed approach. The antenna is experimentally verified. It is demonstrated that two operating bands for radiation are ranged from 2.36 to 2.58 GHz and from 4.1 to 15.72 GHz, respectively, in which the reflection coefficient are both 相似文献   

Wideband circularly polarized hybrid dielectric resonator antenna with bi‐directional radiation characteristics for various wireless applications

In this article, a wideband circularly polarized (CP) dielectric resonator (DR) over an asymmetric‐slot radiator based hybrid‐DR antenna is proposed with bi‐directional radiation characteristics. Bi‐directional CP radiation of the dual sense is obtained using a rectangular‐DR over asymmetric‐rectangular‐slot radiator with L‐shaped feed line. The asymmetric‐slot radiator feed by L‐shaped stub with the coplanar waveguide is used for generating two orthogonal modes, namely TE ^x _δ11 and TE^y_1δ1 in the combined (rectangular‐DR and asymmetric‐slot radiator) hybrid‐DR antenna, which is verified by the distribution of electric field inside the rectangular DRA. The measured reflection coefficient bandwidth (S₁₁ < ?10 dB) and axial ratio (AR) bandwidth (AR < 3 dB) of the hybrid‐DR antenna are 80.5% (1.87‐4.39 GHz) and 43.8% (1.75‐2.73 GHz), respectively. The antenna radiation is in the broadside (θ = 0°, ? = 0°) direction as well as in the backside (θ = 180°, φ = 0°) direction with equal magnitudes in both the directions. Right‐handed and left‐handed CP waves are achieved respectively, in the boresight (+Z) and the backside (?Z) directions. The proposed CP hybrid‐DR antenna gives an average gain of 3.55 dBic and radiation efficiency of 95.0% in both directions. The proposed antenna covers various wireless useful bands such as ISM 2400 band, Wi‐Fi, Bluetooth, and Wi‐MAX (2.5‐2.7 GHz).     

Ultra‐compact 4‐port DR antenna for multi‐input multi‐output standards

Here, an ultra‐compact Multi‐Input‐Multi‐Output (MIMO) antenna system is presented for Wireless Local Area Network (WLAN) applications. The proposed antenna compactness approach is based on using Cylindrical‐Dielectric‐Resonator‐Antenna (CDRA) symmetry with the help of image theory to achieve the best size reduction of the resonators and maintain the resonance frequency of the original CDRA. The electric/magnetic walls approach is utilized to miniaturize the size by exploring the symmetry and antisymmetry of the resonant mode. First, a CDRA for MIMO system is designed and tested in terms of return loss and radiation efficiency. Then, two configurations of MIMO‐Antennas (two and four ports) are examined by using the same substrate size. The 2‐port‐MIMO antenna is built from two half‐CDRs (HCDRs) facing each other. Similarly, four‐quarter‐CDRs (QCDRs) are created to form a 4‐port MIMO antenna system. As a result, a 75% size reduction is achieved (size of 30 × 30 × 7.62 mm³). The measured impedance bandwidth for the 4‐port MIMO antenna is 5.4% (5.4‐5.7 GHz), with more than 15 dB isolation levels. Proper levels of Envelope Correlation Coefficients (ECCs) are also achieved (1 × 10^?2‐4 × 10^?2), with a channel capacity loss (CCL) of 0.04 bits/S/Hz. The proposed MIMO antennas are suitable for compact wireless communication systems.     

A new dual‐mode wideband circularly polarized rectangular dielectric resonator antenna coupled with stubs and asymmetric ground plane for WiMAX applications

In this article, a new radiating stub microstrip feed has been investigated with asymmetrical ground plane for generation of circular polarization (CP) in a dielectric resonator antenna (DRA). Here, asymmetrical ground plane and 3 radiating stubs with microstrip feed line are used for generation of 2 different modes namely TE_11δ and TE_12δ in rectangular DRA. By using mode matching concepts, these modes are responsible for enhancing the impedance bandwidth (TE_12δ ie, and ) and axial ratio (AR) bandwidth (TE_11δ ie, and ) in proposed antenna. Designed antenna offers measured input impedance bandwidth (|S₁₁| < ?10 dB) and AR bandwidth (AR < 3‐dB) of 44.78%, ranging from 4.6 to 6.9 GHz and 23.32%, ranging from 4.6 to 6.9 GHz, respectively. It has been observed that proposed antenna shows left‐handed CP fields in boresight direction with average gain of 3.15 dBic and radiation efficiency of 90.54%. Designed antenna is suitable for Wi‐MAX (3.3‐3.7 GHz) applications.     

A hybrid dual‐mode dielectric resonator antenna with wide beamwidth

A wide beamwidth rectangular dielectric resonator antenna (RDRA) working on dual modes is proposed in this letter. The radiator of the antenna with inside metallic posts and outside metallic walls is placed on a groundplane with a size of 2λ_g × 2λ_g. A TE′_δ21TE′_δ21 mode, which is similar to TE_δ21 mode, is generated by using the metallic posts inside the DR. By adjusting the height of metallic posts and the distance between the DRA and the metallic walls, the TE′_δ21 mode, and the TE_δ11 mode are superimposed with each other, widening the beamwidth of the RDRA to above 140° in both the E‐plane and H‐plane. This antenna works from 8.1 to 8.7 GHz with a relative bandwidth of 7.1%, which can be a good candidate in navigational systems.     

Electrically coupled dual semicylindrical dielectric resonator antenna with inverted arrangement for wideband applications

In this article, an electrically coupled dual semicylindrical dielectric resonator antenna (SC‐DRA) is presented and discussed for wideband applications. The two SC‐DRAs are placed in an inverted arrangement and fed by a coaxial probe to excite the fundamental mode TM _11δ and higher order mode TM _21δ. In the proposed design, wideband performance is obtained by combining the fundamental and higher order mode. Proposed wideband antenna is showing simulated and measured input impedance bandwidth (|S₁₁| ≤ ?10 dB) of 57.94% (3.8‐6.9 GHz) and 64.4% (3.38‐6.6 GHz), respectively. The far field radiation patterns are found to be consistent and 3‐dB beamwidth of 49° and 30° has been achieved at 4.11 and 6.48 GHz, respectively within the working band. This design attains an average gain of 5.65 dBi and radiation efficiency of 97%, respectively.     

Design and its state‐of‐the‐art of different shaped dielectric resonator antennas at millimeter‐wave frequency band

This review article provides an extensive literature survey on the research progress of dielectric resonator antenna (DRA) at millimeter‐wave frequency band that includes concepts of DRAs, their empirical formulae and design methodologies for different shaped DRAs at 60 GHz frequency band. The different shaped DRAs such as cylindrical, rectangular, hexagonal, and octagonal at 60 GHz are designed, simulated and analyzed using CST microwave studio solver. The ?10 dB impedance bandwidth of cylindrical, rectangular, hexagonal, and octagonal DRAs are 52.7 to 62.8 GHz, 57 to 62.2 GHz, 55.8 to 64.2 GHz, and 54.2 to 63.5 GHz, respectively. The idea behind getting broad impedance bandwidth is due to use of double‐layer substrate with different permittivity (ε_r1 = 4 and ε_r2 = 11.9). Empirical formulae are deduced for hexagonal and octagonal DRA, by studying the analogy of dielectric resonator geometry. Consequently, the mode of different shaped DRAs, that is, HEM₁₁₁ and TE₁₁₁ are investigated by the electric field and magnetic field distribution. With these analysis, a comprehensive research review over the period of the last two decades is carried for investigating various techniques, targeted to realized gain, circular polarization, and impedance bandwidth. Along with these analysis the state‐of‐the‐art at different shaped DRAs at mm‐wave frequency band are also reported.     

A new dual C‐shaped rectangular dielectric resonator based antenna for wideband circularly polarized radiation

This article presents a new dual C‐shaped rectangular dielectric resonator (DR) based antenna for generation of wideband circularly polarized (CP) radiation. The proposed antenna comprises of a pair of C‐shaped rectangular dielectric DR and a metal strip with a coaxial probe. By utilization of a metal strip at the side surface of C‐shaped rectangular DR, the wideband CP radiation is achieved from the proposed dielectric resonator antenna (DRA). Fundamental orthogonal modes (TE^x_δ11 and TE^y_1δ1) are excited using the rectangular DRA with a metal strip for the generation of CP fields. The proposed antenna with dual C‐shaped rectangular CP DRA provides the measured ?10 dB reflection coefficient bandwidth of 30.07% (3.22 GHz‐4.36 GHz) with measured 3‐dB axial ratio bandwidth of 14.81% (3.25 GHz‐3.77 GHz) at the boresight. The proposed antenna covers the useful Wi‐MAX band.     

Wideband circular polarized cylindrical segmented dielectric resonator antenna for ISM band applications

In this article, cylindrical segmented dielectric resonator antenna (CDRA) is proposed for ISM band applications. To obtain the proposed antenna, three different (120°, 60°, and 30°) segments of different cylindrical radius r_1, r₂, and r₃ with stacked angular displacement are used for circular polarization with wideband frequency response. Quadrature phase shift of orthogonal field are observed when segment of cylinder is stacked with specific angular displacement. Various higher order modes are investigated. The simulated and measured impedance bandwidth of the proposed antenna is 90% (3.3 GHz‐8.7 GHz) and 83.4% (3.5 GHz‐8.5 GHz) respectively and the simulated and measured axial ratio bandwidth is 53.8% (3.8 GHz‐6.6 GHz) and 58.5% (3.5 GHz‐6.4 GHz), respectively. Proposed antenna attains 7.1 dBi measured peak gain at 8.5 GHz with more than 80% radiation efficiency in the frequency band. The fabricated prototype is experimentally measured and its results are found to be commensurable with the simulation results.     

A metasurface‐based slit‐loaded wideband circularly polarized crossed dipole antenna

A metasurface‐based low‐profile crossed dipole antenna with wide circularly polarized bandwidth for 2.45 GHz ISM band wireless communications is proposed and fabricated in this article. Consisting of four slit‐loaded rectangular patches, the double‐sided printing crossed dipoles are fed by a pair of vacant‐quarter printed rings which circularly polarized (CP) radiation could be generated. With slits loaded, by properly combining the fundamental mode of the two inverted L‐shaped dipole, the slot mode and extra resonance generated by the AMC surface, a wideband circularly polarized operation can be obtained. After optimization, the final design with an overall size of 0.44λ₀ × 0.44λ₀ × 0.1448λ₀ at 2.4 GHz had measured a 31.6% (2–2.75 GHz) impedance bandwidth and 3 dB axial ratio bandwidths of measured were 23.2% (2.1–2.65 GHz), respectively. In addition, the antenna performed a small gain variation (7.0–7.5 dBic) and a front‐to‐back ratio (FBR) of over 25 dB across the whole CP region.     

Dual polarized triple band hybrid MIMO cylindrical dielectric resonator antenna for LTE2500/WLAN/WiMAX applications

In this communication, triple band hybrid multi‐input–multi‐output (MIMO) cylindrical dielectric resonator antenna (CDRA) with high isolation is examined. The proposed MIMO antenna includes two symmetric folded microstrip line feeding structures along with CDRA at two different ends of substrate. Two inverted L‐shaped strips on the ground plane are used to enhance the isolation (S₁₂ < ?15 dB) as well as to generates 2.7 GHz frequency band. Metallic strip on the ground plane act as an electromagnetic reflector and also enhance the isolation between two antennas (S₁₂ < ?20 dB). Archetype of proposed MIMO antenna design has been fabricated and tested to validate the simulated results. The proposed antenna operates at three different frequency bands 2.24–2.38 GHz, 2.5–3.26 GHz, and 4.88–7.0 GHz (S₁₁ < ?6 dB) with the fractional bandwidth 6.06%, 26.4%, and 35.7%, respectively. Folded microstrip lines generate path delay between the electric field lines and originate circular polarization characteristics in the frequency range 5.55–5.75 GHz with the fractional bandwidth of 3.55%. In order to satisfy the different performance requirement of MIMO antenna such as envelop correlation coefficient, mean effective gain, effective diversity gain, peak gain are also examined. The proposed antenna is found suitable for LTE2500, WLAN, and WiMAX applications. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2016.