Substrate integrated waveguide based cavity‐backed self‐triplexing slot antenna for X‐Ku band applications

A planar substrate integrated waveguide (SIW) based cavity‐backed self‐triplexing slot antenna is proposed for X‐Ku band applications. The antenna comprises of the SIW cavity, radiating slots, and feeding networks. The radiating slots; that are etched on the upper metallic plane of the SIW, are backed up by the three radiated quarter cavities (QCs). The radiating slots in the respective QCs are of different lengths, excited by three separated orthogonal feed lines to resonate at three different frequencies as 11.01, 12.15, and 13.1 GHz. By fine‐tuning the antenna parameters, an intrinsic input port isolation of better than 26 dB is realized which helps in achieving the self‐triplexing property. The behaviors of individual cavity modes at three resonant frequencies are explained with the help of Z‐parameter. The proposed antenna layout is easy to integrate with the planar circuit. The proposed antenna is fabricated and measured results display a close concern with the simulated results. Moreover, a unidirectional radiation pattern and gain of 5.1, 5.54, and 6.12 dBi at resonant frequencies are realized.     

Design of a compact orthogonal fed self‐diplexing bowtie‐ring slot antenna based on substrate integrated waveguide

In this article, a novel design of compact cavity‐backed slot antenna based on substrate integrated waveguide (SIW) technology is presented for dual‐frequency communication services. A single layer printed circuit board is applied to implement the proposed antenna. The bowtie‐ring slot engraved on the SIW square cavity is excited using two orthogonal microstrip feed lines to operate at two distinct frequencies (6.62 GHz and 11.18 GHz). The proposed antenna allows each of these frequencies to be designed independently. A prototype of the proposed cavity‐backed antenna that radiates at both 6.62 GHz and 11.18 GHz is fabricated and measured. The port isolation better than 29.3 dB is achieved by utilizing the transmission zeros (TZs), which are produced due to the orthogonal feed lines, TE₁₁₀ mode and coupling between the TE₁₂₀ and TE₂₁₀ modes. The measured peak gains of the proposed diplexing antenna are 5.77 dBi and 5.81 dBi at lower and upper resonating frequencies, respectively. The proposed dual‐frequency antenna exhibits the front‐to‐back‐ratio (FTBR) and cross‐polarization level greater than 26 dB and 21 dB, respectively, at both resonating frequencies.     

Substrate integrated waveguide dual‐frequency dual‐sense circularly polarized cavity‐backed slot antenna

A novel design of dual‐frequency dual‐sense circularly polarized (CP) substrate integrated waveguide (SIW) cavity‐backed slot antenna is presented for dual‐band wireless communication systems. The proposed antenna consists of square SIW cavity, asymmetrical bow‐tie‐shaped cross slot and probe feed. Due to use of asymmetrical bow‐tie‐shaped cross slot, circularly polarized wave radiates at two different frequencies with opposite sense of polarizations. The RHCP radiation occurs at (10.45‐10.54) GHz (Lower band) and LHCP occurs at (11.26‐11.34) GHz (Upper band). Moreover, in each band, sense of polarization can be change by changing the feed position. The front to back radiation ratio (FTBRR) is more than 10.5 dB and cross polarization level is lower than ?20 dB in both the bands.     

Compact high gain half‐mode substrate integrated waveguide cavity antenna using hybrid mode

In this article, a compact fully planar high gain antenna based on half‐mode substrate integrated waveguide (HMSIW) cavity is presented. The design uses a novel configuration of HMSIW cavity with high length to width ratio along with tapered open edge and a pair of slot stub. The high length to width ratio of the cavity helps to excite closely spaced multiple TE^y_m10 cavity modes within comparatively smaller footprint due to use of the HMSIW cavity. These modes combine to give hybrid mode resonance in the cavity which helps to generate a narrow beam high gain radiation pattern of the antenna. The size of the proposed antenna is further reduced and a pair of slot stub is put along the sidewall of the cavity which helps to sustain similar hybrid mode field distribution within much smaller dimension. A size reduction of 76.7% is achieved in the proposed design configuration without degrading much of the gain performance. The proposed antenna resonates at 9.8 GHz with a gain of 7.9 dBi which is much higher than other reported HMSIW cavity antenna. The proposed antenna may find application in point to point communication, short range radar in X band.     

Low‐profile substrate integrated waveguide (SIW) cavity‐backed self‐triplexed slot antenna

A low‐profile self‐triplexed slot antenna is proposed for multiple system integrations. The antenna comprises of hybrid substrate integrated waveguide (SIW) cavity (a combination of a half‐mode circular and half‐mode rectangular SIW), radiating slot, and feeding network. A slot is imprinted on the upper metal‐layer of the SIW which splits the cavity into three radiating sections. It offers tri‐frequency bands when each section is excited separately. By finely tuning the antenna dimensions, it produces three frequency‐bands around 5.57, 7.17, and 7.65 GHz simultaneously utilizes a single slot with maintaining the intrinsic input‐port isolation better than 20 dB. This property helps to introduce the self‐triplexing phenomenon. Compared with the conventional multiband antennas that use an extra circuitry to ensure the port isolations, this design preserves compactness and easy to integrate with planar circuits Moreover, the proposed antenna is fabricated and the measured results mutually agreed with the simulated counterparts. The proposed design can be a feasible option for mobile transceiver applications.     

An SIW filtering antenna array with quasi‐elliptic gain response based on intercavity bypass coupling

In this article, a filtering antenna array based on substrate integrated waveguide (SIW) is proposed with quasi‐elliptic gain responses for the first time. Two radiation nulls in the gain responses at two sides of the frequency band edges are designed by applying a novel intercavity bypass coupling scheme. First, by carefully analyzing the bypass coupling between the in‐band and out‐of‐band modes in a single oversized TE₁₀₃ mode cavity resonator, quasi‐elliptic filtering responses are achieved for a two‐output filter. Afterward, those cavity resonators coupled with the two outputs are replaced by cavity‐backed slot antennas to achieve the proposed filtering cavity‐backed slot antenna array. Only one cavity is required in our design to achieve the two transmission zeros and the function of power divider. As a result, the complexity of the proposed filtering antenna array is reduced. A prototype operating at Ka band is designed, fabricated and measured with a center frequency of 28.5 GHz and fractional bandwidth of 1.25%. Similar characteristics can be observed between the gain response of the proposed filtering antenna and the transmission responses of the two‐output filter. The proposed SIW filtering antenna array has great potential to be integrated into millimeter‐wave transceiver modules. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:191–198, 2016.     

A novel substrate integrated waveguide cavity‐backed self‐diplexing antenna array with frequency beam scanning characteristic

This article presented a substrate integrated waveguide (SIW) cavity‐backed self‐diplexing antenna array with frequency beam scanning characteristic. The proposed array consists of 16 SIW cavity‐backed slot antennas. The SIW cavity‐backed slot antenna can be fed by two separate ports to resonate at two different frequencies and achieve high isolation better than 20 dB between two input ports. The proposed element is a typical self‐diplexing antenna. These cavity‐backed slot antennas are shunt‐fed by a compact 1 to 16 SIW power divider and series‐fed by a set of microstrip lines, respectively. As a result, this array achieves an unidirectional radiation pattern at 10.2 GHz with high gain of 15.10 dBi, and a frequency beam scanning characteristic from 7.0 to 9.0 GHz ranging from ?50° to 46°.     

A coplanar‐waveguide‐fed planar integrated cavity backed slotted antenna array using TE33 mode

This short communication presents a substrate integrated waveguide planar cavity slotted antenna array. The proposed antenna array, excited in its TE₃₃ higher mode, incorporates a grounded coplanar‐waveguide (CPW) CPW‐feeding excitation mechanism. The electromagnetic energy is coupled to the air through 3 × 3 slot array etched on top metallic layer. The proposed antenna operates in the X‐band for the frequency range around the 10 to 11 GHz with resonances at 10.4 and 10.8 GHz frequencies. The proposed antenna array was fabricated and tested. Experimental results show good impedance matching with enhanced radiation characteristics, in terms of peak gain, cross‐polarization level, and low back‐radiation. The proposed antenna has the advantages of low‐footprints, lightweight, high gain, low‐cost, and ease of integration with other electronic circuits. With these characteristics, the proposed antenna array can find its applications in compact wireless digital transceivers.     

Multilayered substrate integrated waveguide 4 × 4 butler matrix

In this article, a multilayered substrate integrated waveguide (SIW) Butler matrix beam‐forming network is proposed, designed, and demonstrated at 24 GHz for automotive radar system applications. The proposed low‐cost SIW structure can be used to develop a highly integrated multibeam antenna platform in automotive radar systems and other applications. In this structure, an SIW H‐plane coupler is optimized with an H‐plane slit to provide the required phase shift. A class of SIW E‐plane 3‐dB couplers in doubled layer substrate are studied and designed as the fundamental building blocks to avoid crossovers usually required in the construction of a Butler matrix. A 4 × 4 matrix is investigated and designed, which shows excellent performance over 22–26 GHz frequency band. Two types of antenna are tested with the proposed matrix scheme. First, an antipodal linearly tapered slot antenna (ALTSA) is incorporated into the Butler matrix to verify the broadband performances. Second, a longitudinal slotted waveguide antenna array is examined to generate radiation patterns in the broadside direction. Measured results agree well with simulated counterparts, thus validating the proposed multilayer SIW design concepts. In the next sections, the use as feeding networks for providing the reconfigurability operation of an antenna will be illustrated. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2012.     

Planar integrated substrate integrated waveguide circularly polarized filtering antenna

A new design of substrate integrated waveguide (SIW) circularly‐polarized (CP) filtering antenna is presented, which is based on dual‐mode (TE₁₀₂ and TE₂₀₁) cavities. The satisfying filtering performance of the antenna is realized by a coupled‐resonator circuit of two dual‐mode SIW cavities. And the radiating element of the antenna is a cavity‐backed CP slot antenna which is formed by a nonuniform ring slot integrated with the back cavity. To demonstrate the idea, a prototype antenna operating at X band is designed, fabricated, and measured. Measured results show that the 10‐dB impedance bandwidth is 4.2% (from 11.6 to 12.1 GHz), the 3‐dB axial‐ratio (AR) bandwidth is 4%, and the gain is 5.6 dBi at the center frequency of 11.8 GHz.     

SIW cavity‐backed 24° inclined‐slots antenna for ISM band application

In this article, a novel resonant series slot linearly polarized antenna is realized using substrate integrated waveguide (SIW) technology for industrial scientific medical radio band (ISM) at 5.8 GHz. The proposed antenna consists of two 24° inclined slots and two metallic vias to produce alternate inductive and capacitive loads. The rectangular slots are introduced at the top metallic surface at an angle of 24° from the Y‐axis to excite a hybrid mode (TE₁₁₀ + TE₁₂₀) near to the modified cavity mode TE₁₂₀. The resonant slots are excited with the help of an inset microstrip feedline which retain its planar integrability. The slots are excited to resonate in the TE₁₂₀ mode at 5.8 GHz. To enhance the bandwidth, the location of two shorting vias are optimized in proximity to the slots. These vias help to couple the hybrid mode and the cavity modes in the desired frequency band, which leads to enhancement in the bandwidth significantly. The proposed geometry is fabricated and experimentally verified. The measured and simulated results depict a good co‐relation which show measured ?10 dB fractional bandwidth of 5.2% with a maximum gain of 7.15 dBi and the front to back ratio better than 15 dB at 5.8 GHz.     

Millimeter‐wave planar high gain SIW antenna using half elliptic radiation slots

This article reports a high gain millimeter‐wave substrate integrated waveguide (SIW) antenna using low cost printed circuit board technology. The half elliptic slots which can provide small shunt admittance, low cross polarization level and low mutual coupling are etched on the board surface of SIW as radiation slots for large array application. Design procedure for analyzing the characteristics of proposed radiation slot, the beam‐forming structure and the array antenna are presented. As examples, an 8 × 8 and a 32 × 32 SIW slot array antennas are designed and verified by experiments. Good agreements between simulation and measured results are achieved, which shows the 8 × 8 SIW slot array antenna has a gain of 20.8 dBi at 42.5 GHz, the maximum sidelobe level of 42.5 GHz E‐plane and H‐plane radiation patterns are 22.3 dB and 22.1 dB, respectively. The 32 × 32 SIW slot array antenna has a maximum measured gain of 30.05 dBi at 42.5 GHz. At 42.3 GHz, the measured antenna has a gain of 29.6 dBi and a maximum sidelobe level of 19.89 dB and 15.0 dB for the E‐plane and H‐plane radiation patterns. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:709–718, 2015.     

Eighth‐mode SIW based compact high gain leaky‐wave antenna

In this article, a novel electrically small eighth‐mode substrate integrated waveguide (EMSIW) based leaky‐wave antenna (LWA) in planar environment is presented. The proposed antenna uses 1/8th mode SIW resonator which helps to improve compactness of the design while maintaining high gain and increased scanning angle. The proposed SIW cavity is excited by a 50 Ω microstrip line feeding to resonate at dominant TE₁₁₀ mode in X‐band. The dimensions of the resonators are adjusted to keep resonant mode at same frequency. The fabricated prototype is approximately 5λ₀ long. Measured results show that the proposed leaky‐wave antenna is able to operate within frequency range of 8‐10 GHz with beam scanning range of 51° and maximum gain of 13.31 dBi.     

Design and analysis of multiband notched pitcher‐shaped UWB antenna

To mitigate the interference with coexisting wireless systems operating over 3.3–3.6 GHz, 5.15–5.825 GHz, and 7.725–8.5 GHz bands, a novel triple band notched coplanar waveguide fed pitcher‐shaped planar monopole antenna is presented for ultrawideband applications. Bands notched characteristics are achieved using a novel mushroom type electromagnetic band gap structure like resonator and a split ring slot. A conceptual equivalent RLC (Resistor‐Inductor‐Capacitor)‐resonant circuit is presented for the band notched characteristics . Furthermore, the input impedance and VSWR (voltage standing wave ratio) obtained from the equivalent circuit are validated with simulated and measured results. Performances of the antennas in both, the frequency domain and the time domain are investigated. The simulated and measured results demonstrate that the proposed antennas have wide impedance bandwidth, nearly stable radiation patterns, and suppression of gain and total radiation efficiency at notched bands. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:795–806, 2015.     

A wideband compact horizontally polarized omnidirectional antenna for 2G/3G/LTE

A compact horizontally polarized omnidirectional slot antenna with a wide working band is presented in this article. The proposed antenna consists of 4 shorter driven cross‐shaped slots, 4 longer parasitic cross‐shaped slots, and a feeding network. Four shorter slots, placed on the same side of a circular substrate, are fed by a feeding network printed on the other side with uniform phase and magnitude. To enhance the bandwidth of the antenna, 4 longer cross‐shaped slots are inserted between adjacent longer slots to produce an additional resonant frequency. All 8 slot radiators placed symmetrically along the circumference results in an omnidirectional horizontal polarized radiation pattern. By utilizing cross‐shaped slots, a compact size of 0.53λ_L × 0.53λ_L × 0.005λ_L (λ_L is the free space wavelength at the lowest operational frequency) is achieved. The prototype of the proposed antenna is fabricated and measured. The measured results reasonably agree with the simulated results. The measured working band for |S₁₁|<–10dB is from 1.62 to 2.81 GHz which successfully covers the 1.7 to 2.7 GHz 2G/3G/LTE bands. The measured gain variation in azimuthal angle is <1.7 dB within 1.7 to 2.7 GHz, and the cross polarization level is <–27 dB in the horizontal plane.     

Compact triband circularly polarized planar slot antenna loaded with split ring resonators

In this article, a coplanar waveguide (CPW) fed triband circularly polarized (CP) planar slot antenna loaded with split ring resonators (SRRs) is presented. The truncated slot antenna resonates at 4.15 GHz, which gives two orthogonal degenerate modes to produce circular polarization at the first band. The second and third band resonances are achieved at 4.77 GHz and 5.1 GHz respectively due to the loading of SRRs on the slot antenna. The electric fields produced by the single and multiple split gaps in each ring of SRR1 and SRR2 produce CP at the second and third band. All three bands are tuned independently to achieve optimized axial ratio bandwidth. The antenna is fabricated and verified experimentally. The measured results give impedance bandwidth of 64.54% and axial ratio bandwidths of 11.76%, 1.9%, and 3.87% at first, second, and third band, respectively.     

Compact tri‐band MIMO antenna based on quarter‐mode slotted substrate‐integrated‐waveguide cavity

A compact tri‐band multiple‐input‐multiple‐output (MIMO) antenna based on a quarter‐mode slotted substrate‐integrated‐waveguide (SIW) cavity is proposed. By etching a wide slot, a single SIW cavity is divided into two sub‐cavities with the same size. They are fed by coaxial ports to form two MIMO elements and high antenna isolation can be achieved by this slot. To obtain multi‐band operations, two narrow slots are cut in the upper sub‐cavity and the other two slots are etched in the lower sub‐cavity. Three eighth‐mode resonances with different areas can simultaneously occur in these antenna elements. A prototype with the overall size of 0.34λ₀ × 0.34λ₀ has been fabricated. The measured center frequencies of three operating bands are 2.31, 2.91, and 3.35 GHz, respectively. The measured gain at above frequencies is 4.52, 4.29, and 4.57 dBi, respectively. Moreover, the measured isolation is higher than 16.7 dB within the frequency of interest.     

A compact substrate integrated waveguide backed self‐quadruplexing antenna for C‐band communication

This article presents a simple, compact, and lightweight substrate integrated waveguide (SIW) backed self‐quadruplexing antenna for quad‐band applications. The design procedure is straightforward. Topside of the SIW cavity is modified to form four patches of different lengths which are fed separately by four 50‐Ω microstrip feed lines and operate at 5.14, 5.78, 6.74, and 7.74. It attains 4.1, 4.96, 6.2, and 6.1 peak gain at the above frequencies, respectively. The observed front‐to‐back‐ratio is more than 17.5 dB and the isolation level is above 28 dB. This antenna topology allows to redesign each resonant frequencies as per application requirement using a single parameter and without disturbing other performances. Design guidelines for developing the proposed antenna are provided. A prototype antenna is fabricated using RT‐Duroid (5870) substrate and characterized for validation. The proposed antenna is suitable for handheld microwave devices for C‐band communication.     

A wideband circularly polarized slot antenna with antipodal strips for WLAN and C‐band applications

A single‐fed circularly polarized square shaped wide slot antenna with modified ground plane and microstrip feed has been presented. The field in the slot is perturbed by introducing an antipodal strips section attached with a microstrip line to produce circular polarization in a wide band of frequencies. The antipodal strip section consists of a group of four strips of unequal length and separation. The presence of asymmetric perturbations in the slot is mainly responsible for exciting two orthogonal modes in the slot having equal magnitude and 90° phase difference which results in circular polarization. A wide bandwidth of 3.3 GHz (4.4 GHz‐7.7 GHz) has been achieved for an axial ratio value AR < 3 dB with the minimum axial ratio value being 0.3 dB. The impedance bandwidth for |S₁₁| < ?10 dB ranges from 4.3 GHz to 8 GHz, and therefore covers most of the C‐band communication systems. The antenna exhibits stable radiation patterns throughout the circular polarization bandwidth with a gain around 6 dBi in entire operational bandwidth. A prototype of antenna was fabricated and measured. The antenna has a planar size 0.40λ₀ × 0.40λ₀ and thickness of 0.02λ₀ where λ₀ is the wavelength in free space at the lowest frequency. With its compact size and low profile, the antenna is a favorable choice for WLAN (5.15‐5.85 GHz) and a wide variety of C‐band wireless applications.     

A novel dual‐wideband inscribed hexagonal fractal slotted microstrip antenna for C‐ and X‐band applications

This paper presents a novel geometry of inscribed hexagonal slotted microstrip antenna for dual‐band performance where the fractal iteration has been made by introducing concentric slots in the patch geometry. Using the equivalence principle and cavity model, the basic geometry of the hexagonal slotted patch is analyzed, and the resonant frequencies of different modes of the patch are computed. Higher‐order modes of the patch antenna are used to obtain dual band. Good performance in terms of the reflection coefficient is proved with the help of parametric analysis. The antenna geometry is simulated using electromagnetic simulation software based on the finite‐element method. The prototype of this antenna is fabricated and tested. The practical results match with the simulated results. The proposed antenna provides improved average gain. The peak values of measured gain are found to be 5.238 and 7.023 dBi—in the two bands 5.85 to 6.48 GHz and 7.28 to 8.63 GHz, respectively. Stable radiation patterns with good average gain make the proposed antenna appropriate for long‐range transmission. Furthermore, low profile and low cost make this antenna suitable for the future point‐to‐point high‐speed wireless communication applications.