共查询到20条相似文献,搜索用时 140 毫秒
1.
2.
七十年代中期,我厂从瑞典伊沙(ESAB)公司进口了焊接锚链的闪光焊设备,现将该设备的电气、液压控制系统简介如下: 在闪光焊机的电气部分和液压机械部分间,采用电液伺服阀(见图1),用电信号 相似文献
3.
根据某职业学校使用BX1-200-3型孤焊变压器对学生进行焊接实际操作培训时焊机接连出现损坏的现象,对该弧焊变压器的电气组成和原理进行了分析说明,指出了该弧焊变压器在电路结构和控制方法上存在的隐患及造成焊机损坏的原因,即两公共电源接线端子所接电源种类必须与焊机转换开关的档位保持严格对应关系,否则实际操作时稍有差错,即会... 相似文献
4.
5.
6.
本文针对摩托车清音器环缝自动氩弧焊机的设计原理,详细介绍了该机的机械调节原理和电气控制系统。生产试验表明,XH2—200型焊机能满足产品的工艺要求。 相似文献
7.
1.焊机的基本结构及电气原理 BX1系列交流弧焊机(以下简称焊机),是用以供单人手弧焊的焊接电源之一,它可进行各种低碳钢、低合金钢构件的焊接。本系列焊机具有体积小、重量轻、使用灵活、调节方便、噪音小等良好的使用性能,同时还具有引弧容易、电弧燃烧稳定、飞溅小、焊缝成形美观等优良的焊接性能。本系列焊机虽有多种规格,但其结构及电气原理是相同的,如图1所示。 相似文献
8.
9.
“下向焊”工艺方法在管道焊接中的应用及设备特点 总被引:3,自引:0,他引:3
就管焊接中的高效焊工艺方法-管道下向焊的工艺特点及对弧焊机的特殊要求的进行了剖析,介绍了适用于该工艺方法的几种品牌焊机,对工程施工单位及焊机制造厂商具有一定参考价值。 相似文献
10.
11.
This paper deals with machine tool components for use in a small machine tool for micro machining. The goal is an automated manufacturing process and to reduce manual handling by the operator as far as possible. This includes a miniaturized clamping device for fixing a test workpiece via freezing of water. Using the Finite Element Method, the thermal deformation of the test workpiece made of 100Cr6 could be analyzed as well as the static stiffness and dynamic behavior of the clamping device. Additionally, an automated workpiece supply using electromagnets and a pneumatic cylinder is presented. For extraction of chips, an adapted extraction hood was developed. The paper presents first results of performed Computational Fluid Dynamic simulations regarding velocity and streamlines of particles. Furthermore, a demonstrator of the micro machine tool shows the current installation space, enabled with the developed machine tool components. Here, the machine tool frame is made of CFRP due to its thermal stability. 相似文献
12.
13.
14.
15.
简要介绍一种液压与机械相结合的金属拉拔机。其工作效率及产品质量接近液压拉拔机,而制造成本低。该拉拔机操作简单,保养方便,适应于中小规格的管材(包括铜、铝等有色金属)拉拔。 相似文献
16.
数控系统中PLC信息交换技术研究 总被引:1,自引:0,他引:1
数控技术是一门涵盖多学科多门类的自动控制技术。本文以机床为控制对象对数控系统中PLC信息交换的几种典型形式进行了分析,以FAGOR数控系统为例详细介绍了内置和外置物理结构中PLC和CNC之间信息交换的过程和物理量,并对开放式数控系统中PLC信息的交换过程作了系统分析,给出了典型应用程序。最后文章对数控技术的未来作了展望。 相似文献
17.
本文所叙述的500kN液压拉力试验机是应用于电力系统的输变电建设中,是一个典型的机液一体化设备,它包含了拉伸机构、液压系统、拉力传感器及计算机控制系统。针对拉力试验机的特殊工况要求,及原设备存在的缺点和不足,重点对其液压系统进行了更新和改造,同时对软件的控制算法作了相应的修改。改造后的拉力试验机具有操作方便、安全可靠的优点。 相似文献
18.
介绍了引进的辐射加热无氧化辊式热处理炉及连续辊式淬火机,有效地解决了钢板的表面质量问题,取得了满意的效果. 相似文献
19.
庄殿铮 《组合机床与自动化加工技术》2003,(11):65-66
介绍了一种数控机床通信控制器的设计与实现方法,这种通信控制器用于生产中大量使用的普通数控机床。通信控制器由ATMEGAl28L和RTL8019AS构成,采用嵌入式Internet技术实现,可以完成数控机床RS232接口数据、开关量和模拟量信号到Internet的双向转换并能实现基于Web方式的数控机床远程控制。 相似文献
20.
Virtual simulation and optimization of the dynamic behavior of machine tools in the development phase is required to satisfy the increasing demands on machine tool performance. While mass and stiffness properties can be simulated with sufficient accuracy, often no suitable damping models are available for the components of machine tools. The commonly used linear damping models are predominantly linear hysteretic or viscous models. However, the linear damping models are often not appropriate to reflect the occurring nonlinear effects in machine tools with the required accuracy. The reason for these nonlinearities are predominantly the friction forces in feed drive components. To resolve these deficits, the friction in feed drive components is comprehensively investigated in this paper, models for friction forces are identified and coupled with a reduced, flexible multi-body system. With the identified friction models the measured friction curves can be reproduced very precisely. The coupled, reduced, flexible multi-body model allows to simulate the nonlinear effects and to predict the dynamic behavior of machine tools with high accuracy. Consequently, a further important step towards accurate virtual simulation of machine tools is made. 相似文献