Selective cyclisation of 2, 3, 4, 5-tetra-O-acetyl-galactaric acid bis-[Alkylthio(thiocarbonyl)]hydrazide to Saccharide 1, 3, 4-Oxadiazole,Thiadiazole, and thiadiazoline derivatives

The synthesis of galactaric acid acetate bis[alkylthio(thiocarbonyl)]hydrazide ( 1 , 2 ) is described. Selective cyclisation of both hydrazides 1 and 2 was investigated. Phosphorous oxychloride as cyclising agent led to dehydrative cyclisation and produced 1, 2, 3, 4-tetra-O-acetyl-1, 4-bis(5-S-methyl or — benzyl) 1, 3, 4-thiadiazol-2-yl galactotetritol ( 3 ) or ( 4 ). While thionyl chloride led to dehydrosulfurization and gave 1, 2, 3, 4-tetra-O-acetyl-1, 4-bis(5-S-methyl or -benzyl)-1, 3, 4-oxadiazol-2-yl galactotetritol ( 5 ) or ( 6 ). Finally with triethyl orthoformate as cyclising agent, compounds 1 or 2 , gave 3, 3′-(2, 3, 4, 5-tetra-O-acetyl-galactar-1.6 dioyl)bis[2-ethoxy-2, 3-dihydro-5-S-methyl or benzyl 1, 3, 4-thiadiazole] ( 7 ) or ( 8 ).     

Novel 1,3,5-Triazinyl Aminobenzenesulfonamides Incorporating Aminoalcohol,Aminochalcone and Aminostilbene Structural Motifs as Potent Anti-VRE Agents,and Carbonic Anhydrases I,II, VII,IX, and XII Inhibitors

A series of 1,3,5-triazinyl aminobenzenesulfonamides substituted by aminoalcohol, aminostilbene, and aminochalcone structural motifs was synthesized as potential human carbonic anhydrase (hCA) inhibitors. The compounds were evaluated on their inhibition of tumor-associated hCA IX and hCA XII, hCA VII isoenzyme present in the brain, and physiologically important hCA I and hCA II. While the test compounds had only a negligible effect on physiologically important isoenzymes, many of the studied compounds significantly affected the hCA IX isoenzyme. Several compounds showed activity against hCA XII; (E)-4-{2-[(4-[(2,3-dihydroxypropyl)amino]-6-[(4-styrylphenyl)amino]-1,3,5-triazin-2-yl)amino]ethyl}benzenesulfonamide (31) and (E)-4-{2-[(4-[(4-hydroxyphenyl)amino]-6-[(4-styrylphenyl)amino]-1,3,5-triazin-2-yl)amino]ethyl}benzenesulfonamide (32) were the most effective inhibitors with K_Is = 4.4 and 5.9 nM, respectively. In addition, the compounds were tested against vancomycin-resistant Enterococcus faecalis (VRE) isolates. (E)-4-[2-({4-[(4-cinnamoylphenyl)amino]-6-[(4-hydroxyphenyl)amino]-1,3,5-triazin-2-yl}amino)ethyl]benzenesulfonamide (21) (MIC = 26.33 µM) and derivative 32 (MIC range 13.80–55.20 µM) demonstrated the highest activity against all tested strains. The most active compounds were evaluated for their cytotoxicity against the Human Colorectal Tumor Cell Line (HCT116 p53 +/+). Only 4,4’-[(6-chloro-1,3,5-triazin-2,4-diyl)bis(iminomethylene)]dibenzenesulfonamide (7) and compound 32 demonstrated an IC₅₀ of ca. 6.5 μM; otherwise, the other selected derivatives did not show toxicity at concentrations up to 50 µM. The molecular modeling and docking of active compounds into various hCA isoenzymes, including bacterial carbonic anhydrase, specifically α-CA present in VRE, was performed to try to outline a possible mechanism of selective anti-VRE activity.     

Bond strengths of toluenes, anilines, and phenols: to hammett or not

The Hammett equation correlates the effects of Y on many different chemical properties of YC(6)H(4)ZX families of compounds. One of the most surprising is that the Z-X bond dissociation enthalpy (BDE), a homolytic property, can be correlated for some 4-YC(6)H(4)ZX families with electrophilic substituent constants, sigma(p)(+)(Y), which were largely derived from the rates of the heterolytic S(N)1 solvolyses of para-substituted cumyl chlorides. Although there is no Hammett correlation of the C-X BDEs in 4-YC(6)H(4)CH(2)X (X = H, halide, OPh) families, there are good correlations of N-X BDEs with sigma(p)(+)(Y) in 4-YC(6)H(4)NHX (X = H, CH(3), OH, F) and excellent correlations of O-X BDEs with sigma(p)(+)(Y) in 4-YC(6)H(4)OX (X = H, CH(3), CH(2)Ph) families. The reasons for this varied behavior are discussed.     

Terbium-doped ZnS quantum dots: Structural,morphological, optical,photoluminescence, and photocatalytic properties

Terbium (0, 2, and 4?at%)-doped ZnS quantum dots (QDs) were synthesized via a solvothermal method. The crystal structures of the synthesized QDs were determined to be zinc blend by X-ray powder diffraction (XRD) and Raman analyses. Transmission electron microscopy (TEM) studies revealed that particles with a mean size of 2–4?nm were formed. An X-ray photo electron spectroscopy (XPS) examination disclosed the existence of terbium with a trivalent state in the ZnS host lattice. The absorption bands of all QDs were located around 325?nm (3.81?eV) and were higher than that of the bulk ZnS band gap (3.67?eV), consistent with the quantum confinement effect. The photoluminescence spectra of the terbium-doped samples displayed five emission peaks at 467?nm (⁵D₄→⁷F₃), 491?nm (⁵D₄ → ⁷F₆), 460?nm (⁵D₄ – ⁷F₅), 484?nm (⁵D₄ – ⁷F₄), and 530?nm (⁵D₄ – ⁷F₃), respectively. The terbium-doped QDs exhibited a higher photocatalytic activity during the degradation of crystal violet dye under UV-light illumination compared to the undoped ZnS QDs. These interesting properties of terbium-doped ZnS QDs are potentially useful for both luminescent and photocatalysis applications.     

Phase Relations in the Systems A2O-Metal Oxide-WO3 (A=Li, Na; Metal=Fe, Cr, Sn, Zr, Th, V)

Phase relations, with special emphasis on the formation of wolframite-type phases, were determined in 12 ternary systems, each containing an alkali oxide (Li₂O, Na₂O), a polyvalent oxide (Fe₂O₃, Cr₂O₃, SnO₂, ThO₂, ZrO₂, V₂O₅), and WO₃. Among 12 ternary phases characterized, 5 have the wolframite-type structure. They are LiFe(WO₄)₂, LiCr(WO₄)₂, NaFe(WO₄)₂, NaCr(WO₄)₂, and Li₂Zr(WO₄)₃. Complete series of solid solutions exist along Li(Fe,Cr) (WO₄)₂ and Na(Fe,Cr)(WO₄)₂ joins but not along other wolframite joins. Both LiFe(WO₄)₂ and LiCr(WO₄)₂ were also found to form complete solid solution series with MgWO₄, a compound used hi this study to represent the simple wolframite-type phase.     

Synthesis and properties of cross-linkable block copolymer end-capped with 2, 2, 3, 4, 4, 4-hexafluorobutyl methacrylate

A series of novel cross-linkable copolymers 2, 2, 3, 4, 4, 4-hexafluorobutyl methacrylate-poly (isobutyl methacrylate)-b-poly[3-(trimethoxysilyl)propyl methacrylate] (HFMA-PIBMA-b-PTMSPMA) were synthesized via atom transfer radical polymerization (ATRP). The synthesis and structure of the polymers were characterized by gel permeation chromatography (GPC), Fourier transform infrartd (FTIR) and ¹H nuclear magnetic resonance (NMR). The properties of HFMA-PIBMA-b-PTMSPMA and the corresponding copolymers end-capped with nonfluorinated acrylate were comparatively studied by contact angle, transmission electron micrograph (TEM), and dynamic light scattering (DLS) measurement. The results indicated that the surface properties and self-assembly behaviors of HFMA-PIBMA-b-PTMSPMA were changed greatly by the introducing of only one fluorinated acrylate. Finally, the transparent solid materials with a slightly blue color were obtained based on the cross-linked behaviors of HFMA-PIBMA-b-PTMSPMA and fracture surfaces of the materials were exhibited by scanning electron microscopy (SEM).     

The thermo-mechanical properties and ferroelastic phase transition of RENbO4 (RE = Y,La, Nd,Sm, Gd,Dy, Yb) ceramics

In this work, RENbO₄ (RE = Y, La, Nd, Sm, Gd, Dy, Yb) ceramics with low density, low Young's modulus, low thermal conductivity, and high thermal expansion have been systematically investigated, the excellent thermo-mechanical properties indicate that RENbO₄ ceramics possess the potential as the new generation of thermal barrier coatings (TBCs) materials. X-ray diffraction and Raman spectroscopy phase structure identification reveal that all dense bulk specimens obtained by high-temperature solid-state reaction belonged to the monoclinic (m) phase with C12/c1 space group. The ferroelastic domains are detected in the specimens, revealing the ferroelastic transformation between tetragonal (t) and monoclinic (m) phases of RENbO₄ ceramics. The Young's modulus and hardness of the RENbO₄ ceramics measured by the NanoBlitz 3D nanoindentation method are discussed in details, and the lower Young's modulus (60-170 GPa) and higher hardness (the maximum value reaches 11.48 GPa) indicating that higher resistance of RENbO₄ ceramics to failure and damage. Lower thermal conductivity (1.42-2.21 W [m k]⁻¹ at 500°C-900°C) and lower density (5.330-7.400 g/cm³) than other typical TBCs materials give RENbO₄ ceramics the unique advantage of being new TBCs materials. Meanwhile, the thermal expansion coefficients of RENbO₄ ceramics reach 9.8-11.6 × 10⁻⁶ k⁻¹ and are comparable or higher than other typical TBCs materials. According to the first-order derivative of the thermal expansion rate, the temperature of the ferroelastic transformation of RENbO₄ ceramics can be observed.     

Synthesis, Characterization, and Some Properties of 4-Vinylpyridine-Cr(CO)5 Containing Polymers

The polymerization of 4-vinylpyridine (4VP) and 4-vinylpyridine chromium pentacarbonyl [(4VP)Cr(CO)₅] was performed under N₂ atmosphere at 60–80°C temperature range. Different percent of feed (%PF) of Cr(CO)₅ groups were anchored into poly(4-vinylpyridine) (P4VP) by addition of the intermediate Cr(CO)₅THF, which was generated photochemically from Cr(CO)₆ in THF, to the polymer at ambient temperature. The determined percent of anchoring (%PA) has shown that the maximum anchored Cr(CO)₅ groups was 40% (w/w) with respect to P4VP, and the optimum percent of anchoring was 20% (w/w). The rate of polymerization (R _p ) and the activation energy (E _a ) of 4VP in the absence and in the presence of 16.7% Cr(CO)₅(4VP) were determined. Thermal analysis has shown various changes in the properties of the 4VP polymers after modification of the polymer by Cr(CO)₅ groups. The X-ray diffraction and the melting enthalpy derived from the DSC thermogram revealed that the synthesized poly[(CO)₅Cr(4VP)] has a crystallinity of about 40%, whereas no crystallinity was observed for pure P4VP.     

Thermal, Mechanical, and Chemical Properties of Sintered Xenotime-Type RPO4 (R = Y, Er, Yb, or Lu)

Xenotime-type RPO₄ (R = Y, Er, Yb, or Lu) powder was dry-pressed into disks and bars. The disks and bars could be sintered to a relative density of greaterthan equal to98% in air without cracking at 1300° (R = Yb or Lu) or 1500°C (R = Y or Er), depending on the grain size. The linear thermal expansion coefficient (at 1000°C), thermal conductivity (at 20°C), and bending strength (at 20°C) of the xenotime-type RPO₄ ceramics were 6.2 10^-6/°C, 12.02 W(mK)^-1, and 95 ± 29 MPa for R = Y; 6.0 10^-6/°C, 12.01 W(mK)^-1, and 100 ± 21 MPa for R = Er; 6.0 10^-6/°C, 11.71 W(mK)^-1, and 135 ± 34 MPa for R = Yb; and 6.2 10^-6/°C, 11.97 W(mK)^-1, and 155 ± 25 MPa for R = Lu. The xenotime-type RPO₄ ceramics did not react with SiO₂, TiO₂, Al₂O₃, ZrO₂, or ZrSiO₄, even at 1600°C for 3 h in air, and were stable in aqueous solutions of HCl, H₂SO₄, HNO₃, NaOH, and NH₄OH at 20°C.     

2－丁氧基－5－（1，1，3，3－四甲基丁基）－苯硫酸的合成

以４－（１，１，３，３－四甲基丁基）－苯酚２为原料，通过３步合成了２－丁氧基－５－（１，１，３，３－四甲基丁基）－苯硫酚１。４－（１，１，３，３－四甲丁基）－苯酚２是由苯酚与二聚异丁烯（Ｄｉｉｓｏｂｕｔｙｌｅｎｅ）在硫酸存在下反应制得。３个化合物的结构以１ＨＮＭＲ予以表征。     

4,4'-二氨基-3,3',5,5'-四甲基二苯甲酮的合成研究

本文研究了4,4’-二氨基-3,3’,5,5’-四甲基二苯甲酮的合成条件和精制方法,较好的反应条件是：DTD2g和氨醌4g加到40ml乙醇中并在外保护下回流4小时,粗品收率93.5。产品提纯方法是重结晶,溶剂选择是关键。利用DSC、元素分析、IR谱和H’－NMR谱确认了产物的组成和结构。     

Solvent Extraction of Indium,Gallium, and Zinc Ions with Acidic Organophosphates having Bulky Alkyl Groups

The extraction equilibria of In³⁺, Ga³, and Zn²⁺ with bis(4‐ethylcyclohexyl)phosphoric acid (D4ECHPA), bis(4‐cyclohexylcyclohexyl)phosphoric acid (D4DCHPA), and bis(2‐ethylhexyl)phosphoric acid (D2EHPA) were investigated in acidic aqueous sulfate media. The order of extractability of metal ions is D4DCHPA > D2EHPA > D4ECHPA, which corresponds to the lipophilicity (log P) of the extractants. The separation factors, β_(In/Ga) and β_(Ga/Zn), of D4ECHPA and D4DCHPA are greater or comparable than that of D2EHPA, because of the steric hindrance of the bulky cyclohexyl groups. In³⁺ can be therefore separated from simulated liquor containing a high concentration of Zn²⁺ by D4DCHPA.     

Lanthanide-doped nanocrystals: synthesis, optical-magnetic properties, and applications

Because of the potential applications of lanthanide-doped nanocrystals in display devices, optical communication, solid-state lasers, catalysis, and biological labeling, the controlled synthesis of these new nanomaterials has sparked considerable interest. Nanosized phosphorescent or optoelectronic devices usually exhibit novel properties, depending on their structures, shapes, and sizes, such as tunable wavelengths, rapid responses, and high efficiencies. Thus, the development of facile synthetic methods towards high-quality lanthanide-doped nanocrystals with uniform size and shape appears to be of key importance both for the exploration of their materials properties and for potential applications. This Account focuses on the recent development in our laboratory of the synthesis and applications of lanthanide-doped nanocrystals. Since 2005, when we proposed a general strategy for nanocrystal synthesis via a liquid-solid-solution process, a range of monodisperse and colloidal lanthanide-doped fluoride, oxide, hydroxide, orthovanadate, thiooxide, borate, and phosphate nanocrystals have been successfully prepared. By rationally tuning the reaction conditions, we have readily synthesized nanostructures, such as hollow microspheres, nanorods, nanowires, hexagonal nanoplates, and nanobelts. By adjusting the different colloidal nanocrystal mixtures, we fabricated unique binary nanostructures with novel dual-mode luminescence properties through a facile ultrasonic method. By tridoping with lanthanide ions that had different electronic structures, we successfully achieved β-NaYF(4) nanorods that were paramagnetic with tuned upconversion luminescence. We have also used NaYF(4):Yb(3+)/Er(3+) conbined with magnetite nanoparticles as a sensitive detection system for DNA: NaYF(4):Yb(3+)/Er(3+) and Fe(3)O(4) nanoparticles were modified with two different DNA sequences. Then, the modified NaYF(4):Yb(3+)/Er(3+) nanoparticles were conjugated to the modified Fe(3)O(4) nanoparticles. These binary nanoparticles can be hybridized with a third DNA (target DNA) molecule and separated with the assistance of a magnetic field. In addition, a novel fluorescence resonance energy transfer (FRET) method for nonenzymatic glucose determination has been developed by using the glucose-modified LaF(3):Ce(3+)/Tb(3+) nanocrystals. By using bioconjugated NaYF(4):Yb(3+)/Er(3+) nanoparticles as the energy donor and bioconjugated gold nanoparticles as the energy acceptor, we successfully developed a simple and sensitive fluorescence resonance energy transfer (FRET) biosensor for avidin. Meanwhile, we also carried out preliminary studies to investigate possible applications of lanthanide-doped nanocrystals in catalysis and in dye-sensitized solar cells.     

Controlled reduction for size selective synthesis of thiolate-protected gold nanoclusters Aun (n = 20, 24, 39, 40)

ABSTRACT: This work presents a controlled reduction method for the selective synthesis of different sized gold nanoclusters protected by thiolate (SR = SC2H4Ph). Starting with Au(III) salt, all the syntheses of Aun(SR)m nanoclusters with (n, m) = (20, 16), (24, 20), (39, 29), and (40, 30) necessitate experimental conditions of slow stirring and slow reduction of Au(I) intermediate species. By controlling the reaction kinetics for the reduction of Au(I) into clusters by NaBH4, different sized gold nanoclusters are selectively obtained. Two factors are identified to be important for the selective growth of Au20, Au24, and Au39/40 nanoclusters, including the stirring speed of the Au(I) solution and the NaBH4 addition speed during the step of Au(I) reduction to clusters. When comparing with the synthesis of Au25(SC2H4Ph)18 nanoclusters, we further identified that the reduction degree of Au(I) by NaBH4 also plays an important role in controlling cluster size. Overall, our results demonstrate the feasibility of attaining new sizes of gold nanoclusters via a controlled reduction route.     

Nanocobaltite: Preparation,Characterization, and their Catalytic Activity

Mixed transition metal oxides (MTMO) nanoparticles of 3rd‐series (NiCo₂O₄, CuCo₂O₄, and ZnCo₂O₄) were prepared by a co‐precipitation method. These were characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The particle size was found to be in the order of 53.0, 43.4, and 21.2 nm, respectively. The thermolysis of ammonium perchlorate (AP), AP‐HTPB (hydroxyterminated polybutadiene) composite solid propellants (CSPs), and HTPB was found to be catalyzed with MTMOs and the burning rate of CSPs was also enhanced. TG and ignition delay study demonstrated that the higher temperature decomposition (HTD) of AP is catalyzed enormously by these catalysts and CuCo₂O₄ is the best candidate.     

Novel functionalized monomers based on kojic acid: snythesis,characterization, polymerization and evalution of antimicrobial activity

Two novel acrylate monomers, [5-(benzyloxy)-4-oxo-4H-pyran-2-yl]methyl acrylate and {1-[(5-(benzyloxy)-4-oxo-4H-pyran-2-yl)methyl]-1,2,3-triazol-4-yl}methyl acrylate were synthesized by the reaction of 5-benzyloxy-2-(hydroxymethyl)-4H-pyran-4-one and 5-(benzyloxy)-2-{[4-(hydroxymethyl)-1,2,3-triazol-1-yl]methyl}-4H-pyran-4-one with acryloyl chloride in the presence of triethylamine, respectively. These monomers were polymerized using 2,2^′-azobisisobutyronitrile (AIBN) as the initiator in N,N-dimethylformamide:14-dioxane (10:1) solution. The thermal behavior of the polymers was investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The synthesized compounds were evaluated for their antibacterial and antifungal activites aganist bacteria and fungi using the disk diffusion method. The results indicated that some of these compounds demonstrated moderate to good antibacterial and antifungal activities.     

The synthesis,characterization, electrochemical character,catalytic and antimicrobial activity of novel,azo-containing Schiff bases and their metal complexes

Three novel Schiff base ligands containing the azo group, 2-((E)-(4-((E)-phenyldiazenyl)phenylimino)methyl)phenol, 3-((E)-(4-((E)-phenyldiazenyl)phenylimino)methyl)benzene-1,2-diol and 4-((E)-(4-((E)-phenyldiazenyl)phenylimino)methyl)benzene-1,2,3-triol, were synthesized from the reaction of p-aminoazobenzene with salicylaldehyde, 2,4-dihydroxybenzaldehyde and 2,3,4-trihydroxybenzaldehyde, respectively. The mononuclear Co(II) and Cu(II) complexes of the Schiff base ligands were prepared and characterized using elemental analyses, IR, UV–visible spectroscopy, magnetic susceptibility and conductance measurements; ¹H NMR and mass spectra of the ligands were also recorded. The Co(II) and Cu(II) metal complexes are formed by the coordination of the N and O atoms of the ligands. The electrochemical properties of the metal complexes were investigated at 100 mV s^?1 scan rate in DMSO; the oxidative C–C coupling properties of the Co(II) and Cu(II) complexes were investigated on the sterically hindered 2,6-di-tert-butylphenol (DTBP). In addition, the Schiff base ligands and their complexes were evaluated for both their in vitro antibacterial activity using the disc diffusion method.     

4,4'-二氨基-3,3',5,5'-四甲基二苯甲酮的合成研究

本文研究了4,4’-二氨基-3,3’,5,5’-四甲基二苯甲酮的合成条件和精制方法,较好的反应条件是：DTD2g和氨醌4g加到40ml乙醇中并在外保护下回流4小时,粗品收率93.5。产品提纯方法是重结晶,溶剂选择是关键。利用DSC、元素分析、IR谱和H’－NMR谱确认了产物的组成和结构。     

Hydrothermal synthesis, structural, and spectroscopic studies of vanadium substituted ETS-4

Titano-vanadium silicate with the structure of ETS-4 has been hydrothermally synthesized to produce V-ETS-4. Direct comparison between ETS-4 and V-ETS-4 showed successful isomorphous substitution of titanium by vanadium. The existence of vanadium is confirmed by energy dispersive X-ray spectrometry (EDS). ⁵¹V and ²⁹Si magic-angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy revealed that the vanadium is present as V⁴⁺ and prefers the octahedral site in the ETS-4 structure. Diffuse reflectance ultraviolet–visible (DR UV–Vis) and Raman spectroscopy analyses showed the existence of five- and six-coordinated V⁴⁺, which partly substitute TiO₅ square-pyramids and interrupts the chains of TiO₆ octahedra in the ETS-4 structure. This isomorphous substitution also impacts the thermal stability of V-ETS-4 and it was observed by differential scanning calorimetry (DSC).