Carbonization and liquid-crystal (mesophase) development. 13. Kinetic considerations of the co-carbonizations of coals with organic additives

Five coals, of rank from an anthracite to a non-caking coal, have been carbonized singly and also cocarbonized with decacyclene, mixing ratio 7:3, in the temperature range 648 K to 823 K, heating at 10 K min^?1, with various soak times. The objective of the study is to derive the basic factors which influence the kinetics of formation of mesophase and anisotropic coke. Accordingly, resultant cokes were polished and surfaces examined by reflected polarized light in an optical microscope. The size, shape and extent of anisotropic development is discussed in terms of the conditions of carbonization and the rank of coal. In these systems a somewhat larger optical texture results in cokes produced at the higher carbonization temperatures. The temperature of onset of growth of anisotropic carbon in co-carbonizations was below that of either the coal or the decacyclene. Reactivities are evidently modified. The origins, growth and coalescence of growth units of anisotropic carbon in these cocarbonizations of coals with decacyclene are demonstrated.     

Carbonization of coal blends: mesophase formation and coke properties

Laboratory investigations of strength of cokes from blends of coals incorporating pitch were supported by 7 kg trials. The stronger cokes showed a greater interaction between coal and pitch to produce an interface component of anisotropic mozaics which is relatively resistant to crack propagation. The process whereby coal is transformed into coke includes the formation of a fluid zone in which develop nematic liquid crystals and anisotropic carbon which is an essential component of metallurgical coke. Strength, thermal and oxidation resistance of coke can be discussed in terms of the size and shape of the anisotropic carbon which constitutes the optical texture of pore-wall material of coke. Coals of different rank form cokes with different optical textures. Blending procedures of non-caking, caking and coking coals involve the interactions of components of the blend to form mesophase and optical texture. Petroleum pitches used as additives are effective in modifying the carbonization process because of an ability to participate in hydrogen transfer reactions.     

Carbonization and liquid-crystal (mesophase) development. 8. The co-carbonization of coals with acenaphthylene and decacyclene

Several coals of different rank have been carbonized singly and also co-carbonized with acenaphthylene and decacyclene. The resultant cokes were mounted in resin and polished surfaces were examined for optical texture using a polarized-light optical microscope fitted with a half-wave retarder plate. The optical texture can be assessed qualitatively (visually) or quantitatively by a point-counting technique in terms of size and shape of constituent isochromatic anisotropic units. Some cokes from coals were Isotropic. Acenaphthylene was only able to exert a smaller influence than decacyclene on the optical texture of the resultant cokes from co-carbonizations. Decacyclene was able to modify the optical texture for both the low-rank non-fusible and the caking coals. The effects of changing the proportions of coal to additive were examined. Results are interpreted in terms of ‘depolymerization’ of the coal by the action of the additive (as solvent) and also by the action of the additive in modifying the processes of formation of semi-coke via nematic liquid crystals.     

Structure in cokes from coals of different rank

A range of bituminous coals has been carbonized to 1273 K. Polished surfaces of the solid products, carbons or cokes, are examined for optical texture by optical microscopy. Fracture surfaces of the carbons are examined by scanning electron microscopy (SEM). The carbon from the lowest rank coal (NCB Code No. 702) is isotropic and fracture surfaces are featureless. Carbons from coals of ranks 602, 502 are optically isotropic but fracture surfaces are granular (size 0.1–0.2 μm), indicating small growth units of mesophase. In the carbon/coke from a 401 coal, the anisotropic optical texture and grain size are both ≈0.5–10 μm diameter. Coke from a coking coal (301a, 301b) has a layered structure extending in units of at least 20 μm diameter with sub-structures ~ 1.5 μm within the layers, indicating perhaps that the bedding anisotropy of these coals is not totally lost in the fluid phase of carbonization. The carbons from the higher rank coals have the bedding anisotropy of the parent coal. The combined techniques of optical microscopy and SEM (both before and after etching of the fracture surfaces of coke in chromic acid solution) reveal useful detail of structure in carbons/cokes and of the mechanism of carbonization of coking coals.     

Carbonization and liquid-crystal (mesophase) development. Part 3. Co-carbonization of aromatic and heterocyclic compounds containing oxygen, nitrogen and sulphur

A detailed investigation is reported of the effects upon size and shape of anisotropic mesophase structures in resultant semi-cokes of co-carbonizing eighteen oxygen-, nitrogen- or sulphur-containing compounds with fluorene, carbazole and acenaphthylene. Carbonizations were carried out under pressures of 130 to 320 MN m⁻² to a maximum heat-treatment temperature of 873 K, the mesophases being examined by optical and scanning electron microscopy. Additions of phthalimide, phthalic anhydride or pyromellitic dianhydride to fluorene and carbazole caused development of anisotropic carbon where none was formed on carbonization of the single compounds, or enhanced existing mesophase growth processes. Improvements in mesophase growth result in improved graphitizability of the semi-coke. Of the oxygen-containing compounds, the polycyclics with quinone groupings, or monocyclic molecules with several functional oxygen groupings, assist the growth of anisotropy. Phenol severely retards mesophase growth. Reasons are advanced which incorporate mechanisms of liquid-crystal formation. The implication for coal carbonization is that as the oxygen content in coals, on coalification, becomes increasingly attached to aromatic systems, then the oxygen in prime coking coals may actually enhance the growth of the mesophase during its carbonization. Nitrogen- and sulphur-containing compounds on co-carbonization with acenaphthylene at nitrogen or sulphur contents greater than 3% by weight may cause deterioration of mesophase growth. Such compounds do not significantly affect the carbonization of prime coking coals, but may contribute to the smallness of anisotropic structures in the carbons from coals of lower rank.     

Carbonization and liquid-crystal (mesophase) development. 10. The co-carbonization of coals with solvent-refined coals and coal extracts

Coals (NCB rank 102 to 902) were co-carbonized with solvent-refined coals and coal extracts, mixing ratio of 7:3, to 873 K, heating at 10 K min^?1 with a soak period of 1 h. Resultant cokes were examined in polished section using reflected polarized-light microscopy and optical textures were recorded photographically. These optical textures were compared to assess the ability of the additive pitch to modify both the size and extent of optical texture of resultant cokes. The objective of the study is to provide a fundamental understanding of the use of pitch materials in co-carbonizations of lower-rank coals to make metallurgical coke. A Gulf SRC was able to modify the optical texture of cokes from all coals except the anthracite. Soluble fractions of this Gulf SRC were less effective than the parent SRC. A coal extract (NCB D112) modified coke optical texture, the extent being enhanced as the rank of coal being extracted was increased. Hydrogenation of the coal extract increased the penetration of the pitch into the coal particles but simultaneously reduced the size of the optical texture relative to the non-hydrogenated pitch. This indicates a positive interaction of pitch with coal in the co-carbonization process. The optical texture of the cokes from the hydrogenated coal extract in single carbonizations was larger than that from the non-hydrogenated material. Mechanisms explaining these effects are briefly described.     

Development of optical anisotropy in vitrains during carbonization

The purpose of this work was to examine the possible significance in the formation of metallurgical coke of the anisotropic spherical mesophase exemplified by that found during the carbonization of pitch-like materials, and to ascertain if the various types of optical anisotropy found in coke could form a basis for the characterization of cokes produced from different coals. Vitrains from a wide range of coals were carbonized at temperatures from 370 to 1000 °C and the types and amounts of optical anisotropy in the resulting semi-cokes and cokes were determined from microscopic examination, the anisotropic components being classified according to grain size of the granular mosaics and appearance. The anisotropy developed directly from the isotropic phase, appearing initially as a fine-grained mosaic. With increasing carbonization temperature, this fine-grained mosaic was transformed into progressively coarser-grained anisotropy, the extent of this transformation depending on the rank of the vitrain. It is therefore concluded that the formation, growth and coalescence of anisotropic spherical bodies, such as occurs during the carbonization of pitch, is not a necessary precursor of the mosaic anisotropy in coke. The type and amount of anisotropy developed provide a quantitative means of characterising different cokes.     

Carbonization and liquid-crystal (mesophase) development. 9. The co-carbonization of vitrains with Ashland A200 petroleum pitch

Vitrains from a wide range of ranks of coals were carbonized singly and also co-carbonized (HTT 1273 K) with 25% of Ashland A200 petroleum pitch. Polished surfaces of the resultant cokes were examined for optical texture in a polarizing-light optical microscope using a half-wave retarder plate to produce interference colours. For the anthracites, there is no modification of either component during co-carbonization. The growth of optical texture from the A200 pitch is not affected. For all caking vitrains the optical texture of coke from the blend system is extensively modified when compared to the optical texture of coke from the vitrain. For the low-rank non-caking vitrains the isotropic coke becomes totally or partially anisotropic in co-carbonization. The mechanism of modification of the optical texture of resultant cokes is related to the formation of nematic liquid crystals, mesophase and the semi-coke. It is not considered that the chemistry of pyrolysis is modified on cocarbonization of the vitrain and pitch.     

Catalytic graphitization of cokes by indigeneous mineral matter

Indigeneous mineral matter in coals acts catalytically towards graphitization during heat treatment of coals to 2273 K. Nineteen coals of a wide range of rank were demineralized by acid extraction. Original and demineralized coals were carbonized in the range 1073–2273 K, and the resulting cokes examined by optical microscopy, X-ray diffraction and phase-contrast high resolution electron microscopy. Optical microscopy indicated the extent of formation of anisotropic carbon in the resultant cokes. The (002) X-ray diffraction profiles indicated three types of catalytic effect, for which electron microscopy demonstrated different crystallite structures and interrelations. The importance of catalytic graphitization in metallurgical cokes in relation to their strength and reactivity is discussed.     

Carbonization and liquid-crystal (mesophase) development. 12. Mechanisms of the co-carbonization of coals with organic additives

In industrial situations, coals interact with solvents or additives to produce liquid fuels, solvent-refined coal, coal extract and metallurgical coke. In these processes there occurs a wide variation in effects or modifications of the coal by these additives. This paper describes the modifications which can occur, using a wide range of rank of coal, when these coals interact and are co-carbonized with a wide range of additives of different chemical properties. The optical texture of the resultant cokes is given special attention. The objective of the paper is to summarize the current state of knowledge of the mechanisms of these interactions. Possible mechanisms of interactions are summarized, kinetic and chemical structural aspects of reactions are outlined, the importance is mentioned of the formation of liquid phases enabling anisotropic optical textures in modified cokes to be created, and the industrial relevance of its possible development is discussed.     

Structural study of cokes using optical microscopy and X-ray diffraction

Cokes exhibiting a range of optical texture from isotropie to anisotropic domains > 60 μm diameter were examined by X-ray diffraction. The variation of an optical texture index (OTI) with crystallite height and interlayer spacing was studied. The OTI varies little with the X-ray parameters for cokes whose optical texture is larger than medium-grained (1.5–5.0 μm) mosaic anisotropy. For cokes of smaller optical texture there is a sharp decrease in crystallite height and an increase in interlayer spacing. These results are discussed in terms of fluid mesophase removing defects in cokes of optical texture of size of coarsegrained mosaics and larger. The cokes of smaller optical texture are formed from less fluid mesophase which does not coalesce. Defects therefore remain in this anisotropic carbon of the coke so reducing crystallographic order.     

Carbonization and liquid-crystal (mesophase) development. 11. The co-carbonization of low-rank coals with modified petroleum pitches

Coals of rank ranging from medium quality coking to non-caking, non-fusible, have been co-carbonized with Ashland petroleum pitches A170, A240 and A200 as well as pitches modified by heat-treatment with aluminium chloride using A170, and by reductive hydrogenation of the A200. The mixing ratio was 7:3, the final HTT was 873 K, heating at 10 K min^?1 with a soak time of 1 h. The optical texture of the resultant cokes is assessed using polished surfaces and a polarized-light microscope using reflected light and a half-wave plate. The changes in optical texture are studied from the point of view of using coals of low rank in the making of metallurgical coke. The optical texture of resultant cokes is modified by co-carbonization and the mechanism involves a solution or solvolysis of the non-fusible coals followed by the formation of nematic liquid crystals and mesophase in the resultant plastic phase. The modified A170 pitch is more effective in modifying optical texture than the A170 because of an increase in molecular weight. The hydrogenated A200 is a very reactive additive probably because of an increased concentration of naphthenic hydrogen. The hydrogenated A200 can modify the optical texture of cokes from the organic inerts of coals and from oxidized, non-fusible coals.     

Carbonization and liquid-crystal (mesophase) development: Part 1. The significance of the mesophase during carbonization of coking coals

Recent concepts of the growth processes of liquid-crystal structures, also called mesophase systems, during the carbonization of pitch substances is extended to coal carbonization. A basic model is formulated to explain the coal and coal-blend carbonization processes leading to metallurgical coke. This model explains the differences observed by optical microscopy in the size and shape of anisotropic structures seen in cokes in terms of liquid-crystal growth processes. These processes are considered to be restricted by chemical heterogeneity within the plastic phase, or to be influenced by the presence of solid surfaces (inerts) within the carbonizing system.     

Carbonization and liquid-crystal (mesophase) development. 17. Co-carbonization of a solvent-refined coal with petroleum pitches and hydrogenated coal-extract solution

This study characterizes the optical textures of cokes prepared by the carbonization of Ashland petroleum pitches, of non-hydrogenated and hydrogenated coal-extract solutions (CES) and of blends of non-hydrogenated CES materials with the petroleum pitches and hydrogenated CES materials. At an HTT of 823 K petroleum pitches produce cokes with large sized optical texture of flow-type anisotropy characteristic of needle-cokes. The non-hydrogenated CES materials produce cokes with optical textures of mozaics, 2–10 μm. However, following hydrogenation the CES materials carbonized to cokes all of which possess considerable large sized optical textures which for some materials resemble that of needle-cokes by possessing strong flow-type anisotropy, > 100 μm. Hydrogenation of the CES materials evidently facilitates the physical and chemical requirements for growth and coalescence of lamellar nematic liquid-crystals and mesophase from the fluid phase of carbonization leading to anisotropic carbon. Co-carbonizations of the non-hydrogenated and hydrogenated CES materials exhibit the dominant partner effect and are comparable in behaviour with Ashland petroleum pitches which are known to produce needle-cokes on carbonization.     

A scanning electron microscope study of fractured and etched metallurgical coke surfaces

The object of this work was to attempt to link more closely coke strength and structure by establishing whether features visible on fracture surfaces could be identified with coke carbon textural constituents revealed either by polarized light microscopy of polished surfaces or by scanning electron microscopy of atomic oxygen-etched surfaces. The cokes used were produced in a laboratory furnace from coals covering the whole range or rank normally encountered in metallurgical coke production in the UK. Fracture surfaces were created by tensile fracture during diametral compression. In all three surfaces examined, the appearance of components derived from reactive coal constituents varied with the rank of the coal carbonized. A clear similarity was evident between features visible in the etched and fracture surfaces. The marked variation of fracture features imply that the textural composition of the coke carbon may make some contribution, as yet unquantified, to the variation in strength among cokes.     

Co-carbonization of hard coals and coal extracts 1. The co-carbonization of low rank coals with extracts

Studies on the influence of an additive derived from coal on the coking properties of lower-rank coals and on the structure of cokes obtained from blends have been undertaken in our laboratory since 1978. The two coal extracts from flame coal (Int. Class. 900) and gas-coking coal (Int. Class. 632) were used as additives. The results indicate that the blends prepared from low-rank coals — flame coal (Int. Class. 900), gas-flame coal (Int. Class. 721) and the extracts possess better coking properties in comparison to the parent coals. The optical texture and the degree of structure ordering of the cokes obtained from blends is related to the amount of extract in the blend. With increasing extract content in the blend, increases were observed in the amount of optically anisotropic areas in cokes from low-rank coal/extract blends and the crystallite height (L_c) of cokes from the blends. The isotropic optical texture of cokes from low-rank coals can be modified by coal extracts to an anisotropic optical texture. The non-fusible coal is the most difficult to modify. An explanation of the observed phenomena is given.     

煤的变质程度对焦炭性质影响的研究

对不同变质程度的5种烟煤进行了5 kg实验焦炉炭化实验.并就单种煤的结焦性与对应焦炭的微晶结构间的关系进行了探讨.结果表明,1/3焦煤焦炭、焦煤焦炭的冷态强度和热态强度较好;X射线衍射(XRD)分析结果表明,肥煤焦炭的炭结构因子(La/Lc)最小,石墨化程度最高.焦炭的真相对密度(TRD)随着La/Lc的增大而减小.     

The role of liquid crystals in the formation of graphitizable carbons (cokes)

The formation of cokes and graphites proceeds via the creation from the isotropic fluid phase of carbonization of pitch and coal, of lamellar nematic liquid crystals or mesophase. This anisotropic fluid, deformable mesophase, develops as spheres within which constituent molecules are stacked parallel to an equatiorial plane. This type of structure facilitates coalescence to a coherent mass which eventually forms a graphitisable carbon. The ‘onion-skin’ structure of mesophase spheres cannot so coalesce. Different optical textures of cokes and graphites owe their origin to different chemical reactivities and fluidities of mesophase, the lower the fluidity the smaller the size of the optical texture. Mesophase from lameller molecules is compared with conventional rod-like nematic liquid crystals. Structures in needle-cokes, metallurgical coke, coke from solvent refiend coal and carbon fibre from pitch are discussed in terms of formation and properties of lamellar nematic liquid crystals.     

Carbonization of coals to produce anisotropic cokes: 3. Evaluation of low-rank bituminous and subbituminous coals by single and co-carbonizations with pitch

Single carbonizations and co-carbonizations of 17 low-rank bituminous and subbituminous coals have been studied to evaluate their suitability as sources of blast furnace coke in terms of pore-wall profile and anisotropic development within the cokes. Co-carbonizations suggest the possible use of low-rank coals which from single carbonizations would not have been considered suitable. To evaluate semi-quantitatively the coke quality, two structural characteristics of the cokes produced by single and co-carbonizations are graded on a scale of 1 to 5. Overall assessments for each coal are plotted against the atomic H/C and 0/C ratios of the original coals. Although there are a few exceptions, coals with similar assessments are located in the same region of the plot, indicating that, to a first approximation, the H/C and 0/C ratios are suitable indicators of the single and co-carbonization properties of a coal. The presence of cations in the coal appears to be an additional factor influencing the carbonization properties and may explain the exceptional behaviour of some coals. Removal of these cations by pretreatment of the coals improves the carbonization properties.