共查询到20条相似文献,搜索用时 109 毫秒
1.
现代电信交换技术(13) 总被引:1,自引:0,他引:1
6 IP与ATM结合的集成模型 采用集成模型实现IP与ATM两种技术的结合,是把第三层选路与第二层数据转发功能融合在一起,在同一系统中综合处理。因此,这种方式不需要地址解析过程,从而简化了选路功能。属于集成模型的IP与ATM结合的技术已有IP交换、标记交换和多协议标记交换等等,下面分别介绍各种 相似文献
2.
Internet核心网中的路由/转发技术的最新发展是多协议标签交换(MPLS)。MPLS将IP路由控制和第二层交换的简单性无缝地集成起来,ATM与IP技术的有机结合,在不改变用户现有网络的情况下能提供高速、安全、多业务统一的网络平台,将在下一代网络中的选路、交换和分组转发中扮演非常重要的角色,满足网络用户多种多样的需求。 相似文献
3.
4.
宽带交换技术的演变与进展 总被引:6,自引:0,他引:6
本文简要分析了复用与交换技术的演变以及未来的光交换,分析了交换设备的构成及相关的网络控制与管理技术。阐述了作为IP与ATM融合的新一代网络交换技术-多协议标记交换(MPLS),及其在光网络中的应用。进而分析了基于软交换技术的下一代网络结构,指出了业务、控制与交换将分离的趋势。最后指出,新型交换技术-MPLS和软交换将在网络演进过程中扮演极其重要的角色。 相似文献
5.
6.
在宽带网络技术发展中,随着ATM技术的成熟以及MPLS技术的兴起,两者互连互通的问题突出出来。在ATM与MPLS网络互通体系架构中,原来专用于ATM网络的PNNI协议将有所变化。文中以ATM论坛和ITU-T的标准为依据对网络互通参考模型进行描述,并对PNNI在ATM和MPLS网络互通中的协议模型、信令和选路协议变化进行了研究。 相似文献
7.
光纤传输技术和光网络技术的发展使得光网络成为现代高速宽带网络的基础骨干网。文章论述了三种光交换技术,并详细分析了光突发交换网络技术原理、交换结构及相关网络协议。在目前光器件和光信息处理方式未取得重大突破之时,光突发交换技术集成光电路交换和光分组交换的优势并且实现方式可行,能满足现有大容量、高速率的多媒体信息交换与传输,将成为下一代光IP骨干网的核心技术。 相似文献
8.
9.
10.
多协议标记交换(MPLS)具有技术的高效性与良好的扩展性,异步传输模式技术(ATM)具有强大的转发能力及高可靠性,通过对标记交换的链路层数据转发机制与网络层的选路机制结合进行研究,提出一种基于ATM的MPLS数据转发方法,并对其进行设计和实现。通过模拟实验对功能和性能进行验证表明,此方法能够提高数据业务的效率和可靠性。 相似文献
11.
为了适应网络宽带化、分组化的发展趋势,ISTN中的数字程控交换要逐步演进为包含ATM交换和IP功能的综合业务交换平台。ATM交换的综合可有组合、集成与宽带交换模块等方式;IP的综合视需要可包括IP接入、IP选路、VoIP甚至MPLS等功能。综合交换平台将在网络的演进中发挥重要的作用。 相似文献
12.
首先提出了大规模ATM交换网络应满足的基本特性,然后对Clos网络型大规模ATM交换网络进行了研究,给出了交换网络连接级呼叫的无阻塞条件,论述和分析了一种适合于以信元为单位的分散式路由选择算法。 相似文献
13.
城域网的特征与技术方案选择 总被引:8,自引:1,他引:7
本文首先阐述了城域网的基本内涵和特征以及所面临的挑战,然后分析了城域网的主要问题以及对下一代城域网的基本要求,接下来,重点介绍了城域网的四大技术解决方案(以SDH为基础的多业务平台,基于层2交换和层3选路的方案,以WDM为基础的多业务平台,以ATM为基础的多业务平)特点与适用范围。 相似文献
14.
15.
16.
ATM的多业务承载能力使之成为众多运营商首选的综合业务承载平台,为了实现良好的QoS业务特性,需要处理好网络设计的每个环节。文章着重讨论ATM网的信令选择和路由方式,并探讨ATM网的流量控制和QoS策略。 相似文献
17.
Masetti F. Benoit J. Brillouet F. Gabriagues J.M. Jourdan A. Renaud M. Bottle D. Eilenberger G. Wunstel K. Schilling M. Chiaroni D. Gavignet P. Jacob J.B. Bendelli G. Cinato P. Gambini P. Puleo M. Martinson T. Vogel P. Durhuus T. Joergensen C. Stubkjaer K. Baets R. Van Daele P. Bouley J.C. Lefevre R. Bachmann M. Hunziker W. Melchior H. McGuire A. Ratovelomanana F. Vodjdani N. 《Selected Areas in Communications, IEEE Journal on》1996,14(5):979-998
This paper describes the work carried out in the RACE Project R2039 ATMOS (asynchronous transfer mode optical switching). The project is briefly illustrated, together with its main goal: to develop and assess concepts and technology suitable for optical fast packet switching. The project's technical approach consisted in the exploitation of the space and wavelength domains for fast routing and buffering: The major achievements are then reported. Four different switch architecture concepts have been proposed, investigated and developed, all based on a high speed optical routing matrix electrically controlled at lower speed. The basic optical key components and subsystems (wavelength converters, space switches and optical buffers) are described in detail, with the outstanding results obtained and the corresponding projected performance. In particular, system demonstration of wavelength conversion at 10 and 20 Gb/s has been realized, to show the usefulness of the ATMOS technology both to implement optimized high performance optical packet-switching fabrics as well as transparent optical circuit-routing nodes. Four rack-mounted, reduced size demonstrators of basic switching matrices have been designed and implemented scalable to real system sizes. The obtained good results in terms of bit error rate and hardware integration are reported, showing that ATM switches are feasible with state of-the-art optical technology 相似文献
18.
光突发交换是适合在当前技术条件下的新交换技术,它比电路交换灵活,带宽利用率高,又比光分组交换易于实现,将成为下一代光IP骨干网的核心技术。在光突发交换网络中,偏射路由算法是有效解决突发竞争、提高网络性能的一种重要措施。首先分析了发送端控制的偏射路由技术,在此基础上提出了一种基于阈值检测的偏射路由的改进算法。该算法通过跳数来控制无效偏射路由并通过有条件地丢弃偏射突发来保证正常突发的丢包率,从而减少偏射路由对网络负荷的影响,使整个网络的丢包率得到一定提高,改善网络性能。 相似文献
19.
A high-performance electrical asynchronous transfer mode (ATM) switching system is described with the goal of Tb/s ATM switching. The first step system was to use advanced Si-bipolar very large scale integrated (VLSI) technologies and the multichip technique. 1.0 μm bipolar SST technologies and Cu-polyimide multilayer MCM realized a 160 Gb/s throughput ATM system. The performance limitations of the 160 Gb/s system were power supply/cooling and module interconnection. The new ATM switching system, named OPTIMA-1, adopted optical interconnection/distribution to overcome the limitations and achieve 640 Gb/s. The system uses high-performance complementary metal-oxide-semiconductor (CMOS) devices and optical wavelength division multiplexing (WDM) interconnection. Combining OPTIMA-1 with optical cell-by-cell routing functions, i.e., photonic packet routing, can realize variable bandwidth links for 5 Tb/s ATM systems. This paper first reviews high-performance electrical ATM (packet) switching system architecture and hardware technologies. In addition, system limitations are described. Next, the important breakthrough technology of optical WDM interconnection is highlighted. These technologies are adopted to form OPTIMA-1, a prototype of which is demonstrated. The key technologies of the system are advanced 80 Gb/s CMOS/MCM, electrical technologies, and 10 Gb/s, 8 WDM, 8×8 optical interconnection. Details of implementation technologies are also described. Optical cell-by-cell (packet-by-packet) routing is now being studied. From the architectural viewpoint, dynamic link bandwidth sharing will be adopted. In addition, an AWG that performs cell-by-cell routing and a distributed large scale ATM system are realized. Optical routing achieves the 5 Tb/s needed in future B-ISDN ATM backbone systems 相似文献
20.
简述B-ISDN的两大基础:SDH光纤网和ATM交换机的基本知识,前半部分是讲SDH光纤网的由来、网络拓朴、信息负载与包络及双环结构与设备。后半部分是讲ATM信元交换、ATM适配层、信息业务类型。 相似文献