Low‐Dose X‐ray Activation of W(VI)‐Doped Persistent Luminescence Nanoparticles for Deep‐Tissue Photodynamic Therapy

Although photodynamic therapy (PDT) has served as an important strategy for treatment of various diseases, it still experiences many challenges, such as shallow penetration of light, high‐dose light irradiation, and low therapy efficiency in deep tissue. Here, a low‐dose X‐ray‐activated persistent luminescence nanoparticle (PLNP)‐mediated PDT nanoplatform for depth‐independent and repeatable cancer treatment has been reported. In order to improve therapeutic efficiency, this study first synthesizes W(VI)‐doped ZnGa₂O₄:Cr PLNPs with stronger persistent luminescence intensity and longer persistent luminescence time than traditional ZnGa₂O₄:Cr PLNPs. The proposed PLNPs can serve as a persistent excitation light source for PDT, even after X‐ray irradiation has been removed. Both in vitro and in vivo experiments demonstrate that low‐dose (0.18 Gy) X‐ray irradiation is sufficient to activate the PDT nanoplatform and causes significant inhibitory effect on tumor progression. Therefore, such PDT nanoplatform will provide a promising depth‐independent treatment mode for clinical cancer therapy in the future.     

Colossal X‐Ray‐Induced Persistent Photoconductivity in Current‐Perpendicular‐to‐Plane Ferroelectric/Semiconductor Junctions

Persistent photoconductivity (PPC) is an intriguing physical phenomenon, where electric conduction is retained after the termination of electromagnetic radiation, which makes it appealing for applications in a wide range of optoelectronic devices. So far, PPC has been observed in bulk materials and thin‐film structures, where the current flows in the plane, limiting the magnitude of the effect. Here using epitaxial Nb:SrTiO₃/Sm_0.1Bi_0.9FeO₃/Pt junctions with a current‐perpendicular‐to‐plane geometry, a colossal X‐ray‐induced PPC (XPPC) is achieved with a magnitude of six orders. This PPC persists for days with negligible decay. Furthermore, the pristine insulating state could be fully recovered by thermal annealing for a few minutes. Based on the electric transport and microstructure analysis, this colossal XPPC effect is attributed to the X‐ray‐induced formation and ionization of oxygen vacancies, which drives nonvolatile modification of atomic configurations and results in the reduction of interfacial Schottky barriers. This mechanism differs from the conventional mechanism of photon‐enhanced carrier density/mobility in the current‐in‐plane structures. With their persistent nature, such ferroelectric/semiconductor heterojunctions open a new route toward X‐ray sensing and imaging applications.     

Detection of X‐Rays by Solution‐Processed Cesium‐Containing Mixed Triple Cation Perovskite Thin Films

Materials and technology development for designing innovative and efficient X‐ray radiation detectors is of utmost importance for a wide range of applications ranging from security to medical imaging. Here, highly sensitive direct X‐ray detectors based on novel cesium (Cs)‐based triple cation mixed halide perovskite thin films are reported. Despite being in a thin film form, the devices exhibit a remarkably high X‐ray sensitivity of (3.7 ± 0.1) µC Gy^?1 cm^?2 under short‐circuit conditions. At a small reverse bias of 0.4 V, the sensitivity further increases by orders of magnitude reaching a record value of (97 ± 1) µC Gy^?1 cm^?2 which surpasses state‐of‐the‐art inorganic large‐area detectors (a‐Se and poly‐CZT). Based on detailed structural, electrical, and spectroscopic investigations, the exceptional sensitivity of the triple cation Cs perovskite is attributed to its high ambipolar mobility‐lifetime product as well as to the formation of a pure stable perovskite phase with a low degree of energetic disorder, due to an efficient solution‐based alloying of individual n‐ and p‐type perovskite semiconductors.     

Analysis of Failure in Miniature X‐ray Tubes with Gated Carbon Nanotube Field Emitters

We correlate the failure in miniature X‐ray tubes with the field emission gate leakage current of gated carbon nanotube emitters. The miniature X‐ray tube, even with a small gate leakage current, exhibits an induced voltage on the gate electrode by the anode bias voltage, resulting in a very unstable operation and finally a failure. The induced gate voltage is apparently caused by charging at the insulating spacer of the miniature X‐ray tube through the gate leakage current of the field emission. The gate leakage current could be a criterion for the successful fabrication of miniature X‐ray tubes.     

X‐Ray Spectroscopic Investigation of Chlorinated Graphene: Surface Structure and Electronic Effects

Chemical doping of graphene represents a powerful means of tailoring its electronic properties. Synchrotron‐based X‐ray spectroscopy offers an effective route to investigate the surface electronic and chemical states of functionalizing dopants. In this work, a suite of X‐ray techniques is used, including near edge X‐ray absorption fine structure spectroscopy, X‐ray photoemission spectroscopy, and photoemission threshold measurements, to systematically study plasma‐based chlorinated graphene on different substrates, with special focus on its dopant concentration, surface binding energy, bonding configuration, and work function shift. Detailed spectroscopic evidence of C–Cl bond formation at the surface of single layer graphene and correlation of the magnitude of p‐type doping with the surface coverage of adsorbed chlorine is demonstrated for the first time. It is shown that the chlorination process is a highly nonintrusive doping technology, which can effectively produce strongly p‐doped graphene with the 2D nature and long‐range periodicity of the electronic structure of graphene intact. The measurements also reveal that the interaction between graphene and chlorine atoms shows strong substrate effects in terms of both surface coverage and work function shift.     

Actively Targeted Deep Tissue Imaging and Photothermal‐Chemo Therapy of Breast Cancer by Antibody‐Functionalized Drug‐Loaded X‐Ray‐Responsive Bismuth Sulfide@Mesoporous Silica Core–Shell Nanoparticles

A theranostic platform combining synergistic therapy and real‐time imaging attracts enormous attention but still faces great challenges, such as tedious modifications and lack of efficient accumulation in tumor. Here, a novel type of theranostic agent, bismuth sulfide@mesoporous silica (Bi₂S₃@mPS) core‐shell nanoparticles (NPs), for targeted image‐guided therapy of human epidermal growth factor receptor‐2 (HER‐2) positive breast cancer is developed. To generate such NPs, polyvinylpyrrolidone decorated rod‐like Bi₂S₃ NPs are chemically encapsulated with a mesoporous silica (mPS) layer and loaded with an anticancer drug, doxorubicin. The resultant NPs are then chemically conjugated with trastuzumab (Tam, a monoclonal antibody targeting HER‐2 overexpressed breast cancer cells) to form Tam‐Bi₂S₃@mPS NPs. By in vitro and in vivo studies, it is demonstrated that the Tam‐Bi₂S₃@mPS bear multiple desired features for cancer theranostics, including good biocompatibility and drug loading ability as well as precise and active tumor targeting and accumulation (with a bismuth content in tumor being ≈16 times that of nontargeted group). They can simultaneously serve both as an excellent contrast enhancement probe (due to the presence of strong X‐ray‐attenuating bismuth element) for computed tomography deep tissue tumor imaging and as a therapeutic agent to destruct tumors and prevent metastasis by synergistic photothermal‐chemo therapy.     

Dichotomy in the Lithiation Pathway of Ellipsoidal and Platelet LiFePO4 Particles Revealed through Nanoscale Operando State‐of‐Charge Imaging

LiFePO₄ is a promising phase‐separating battery electrode and a model system for studying lithiation. The role of particle synthesis and the corresponding particle morphology on the nanoscale insertion and migration of Li is not well understood, and elucidating the intercalation pathway is crucial toward improving battery performance. A synchrotron operando liquid X‐ray imaging platform is developed to track the migration of Li in LiFePO₄ electrodes with single‐particle sensitivity. Lithiation is tracked in two particle types—ellipsoidal and platelet—while the particles cycle in an organic liquid electrolyte, and the results show a clear dichotomy in the intercalation pathway. The ellipsoidal particles intercalate sequentially, concentrating the current in a small number of actively intercalating particles. At the same cycling rate, platelet particles intercalate simultaneously, leading to a significantly more uniform current distribution. Assuming that the particles intercalate through a single‐phase pathway, it is proposed that the two particle types exhibit different surface properties, a result of different synthesis procedures, which affect the surface reactivity of LiFePO₄. Alternatively, if the particles intercalate through nucleation and growth, the larger size of platelet particles may account for the dichotomy. Beyond providing particle engineering insights, the operando microscopy platform enables new opportunities for nanoscale chemical imaging of liquid‐based electrochemical systems.     

Many Exciplex Systems Exhibit Organic Long‐Persistent Luminescence

Organic long‐persistent luminescence (OLPL) is a long‐lasting luminescence from a photogenerated intermediated state, such as a charge separated state. Here, it is shown that many exciplex systems exhibit OLPL and that emission pathways of OLPL can be controlled by the relationship among local excited states and charge‐transfer excited states of materials.     

Resolving the Three‐Dimensional Microstructure of Polymer Electrolyte Fuel Cell Electrodes using Nanometer‐Scale X‐ray Computed Tomography

The electrodes of a polymer electrolyte fuel cell (PEFC) are composite porous layers consisting of carbon and platinum nanoparticles and a polymer electrolyte binder. The proper composition and arrangement of these materials for fast reactant transport and high electrochemical activity is crucial to achieving high performance, long lifetimes, and low costs. Here, the microstructure of a PEFC electrode using nanometer‐scale X‐ray computed tomography (nano‐CT) with a resolution of 50 nm is investigated. The nano‐CT instrument obtains this resolution for the low‐atomic‐number catalyst support and binder using a combination of a Fresnel zone plate objective and Zernike phase contrast imaging. High‐resolution, non‐destructive imaging of the three‐dimensional (3D) microstructures provides important new information on the size and form of the catalyst particle agglomerates and pore spaces. Transmission electron microscopy (TEM) and mercury intrusion porosimetry (MIP) is applied to evaluate the limits of the resolution and to verify the 3D reconstructions. The computational reconstructions and size distributions obtained with nano‐CT can be used for evaluating electrode preparation, performing pore‐scale simulations, and extracting effective morphological parameters for large‐scale computational models.     

(Pb1–xCdx)S Nanoparticles Embedded in a Conjugated Organic Matrix,as Studied by Photoluminescence and Light‐Induced X‐ray Photoelectron Spectroscopy

Elliptically shaped (Pb_1–xCd_x)S nanoparticles (NPs) of average size 2.3 × 2.9 nm (minor axis × major axis) have been prepared via reaction of a solid [oligo(p‐phenylene‐ethynylene) dicarboxylate]Pb_0.9Cd_0.1 salt matrix, with gaseous H₂S. A significantly long emission lifetime, with multi‐exponential behavior, is detected in time‐resolved photoluminescence measurements, substantially different from the decay patterns of pure PbS and CdS NPs within the same organic matrix. Evidence for the co‐existence of Cd and Pb within the same particle is provided by light‐induced X‐ray photoelectron spectroscopy.     

Boosting Direct X‐Ray Detection in Organic Thin Films by Small Molecules Tailoring

The attention focused on the application of organic electronics for the detection of ionizing radiation is rapidly growing among the international scientific community, due to the great potential of organic technology to enable large‐area conformable sensor panels. However, high‐energy photon absorption is challenging as organic materials are constituted of atoms with low atomic numbers. Here it is reported how, by synthesizing new solution‐processable organic molecules derived from 6,13‐bis(triisopropylsilylethynyl)pentacene (TIPS‐pentacene) and 2,8‐difluoro‐5,11‐bis(triethylsilylethynyl)anthradithiophene, with Ge‐substitution in place of the Si atoms to increase the material atomic number, it is possible to boost the X‐ray detection performance of organic thin films on flexible plastic substrates. Bis(triisopropylgermylethynyl)‐pentacene based flexible organic thin film transistors show high electrical performance with higher mobility (0.4 cm² V^?1 s^?1) and enhanced X‐ray sensitivity, up to 9.0 × 10⁵ µC Gy^?1 cm^?3, with respect to TIPS‐pentacene‐based detectors. Moreover, similar results are obtained for 5,11‐bis(triethylgermylethynyl)anthradithiophene devices, confirming that the proposed strategy, that is, increasing the atomic number of organic molecules by chemical tailoring to improve X‐ray sensitivity, can be generalized to organic thin film detectors, combining high X‐ray absorption, mechanical flexibility, and large‐area processing.     

Defect recognition in crystalline silicon solar cells by X‐ray tomosynthesis with layer resolution

The increasing demand for higher quality in solar cell production led to the development of several inline control methods. Beneath the image‐guided methods, X‐ray is not yet very well investigated for the application in photovoltaic research but shows high potential. In contrast to the ordinary X‐ray radioscopic method, the tomosynthesis technique exhibits additional depth information of the solar cells and modules. In this article, several applications of tomosynthesis for the investigation of solar cells and modules are studied. It will be shown what potential the application of X‐ray and especially tomosynthesis has as quality control tool for photovoltaics. Copyright © 2013 John Wiley & Sons, Ltd.     

Epoxide Speciation and Functional Group Distribution in Graphene Oxide Paper‐Like Materials

The electronic structure and chemical bonding of three differently prepared samples of graphene oxide paper‐like sheets are studied. Two are created by water filtration of fully oxidized graphene sheets, although one is later intercalated with dodecylamine. The third is created by reducing graphene oxide with hydrazine hydrate. The spectroscopic fingerprints of the aligned epoxide functional groups that unzip the carbon basal plane are found. This unzipping appears to be a result of aging, and the extent to which the basal plane is unzipped can be controlled via the preparation method. In particular, reduction with hydrazine enhances line defect formation, whereas intercalation inhibits the process.The hydroxyl functional group also has a tendency to gather in zones of dense oxidation on the carbon basal plane, a predilection that is not shared by the other prominent functional group species. Finally, the non‐functionalized carbon sites exhibit very similar bonding despite the increase in the sp²/sp³ ratio, confirming that reduction alone is insufficient for producing pristine graphene from graphene oxide. These results are obtained by directly probing the electronic structure of the graphene oxide samples via X‐ray absorption near‐edge structure spectroscopy (XANES) and resonant X‐ray emission spectroscopy (RXES). This work has important significance for the development of graphene oxide as a band gap‐engineered electronic material, as preparation methodology strongly affects not only the initial condition of the sample, but how the electronic structure evolves over time.     

Solvent‐Induced Morphology in Polymer‐Based Systems for Organic Photovoltaics

Studies on the influence of four different solvents on the morphology and photovoltaic performance of bulk‐heterojunction films made of poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) via spin‐coating for photovoltaic applications are reported. Solvent‐dependent PCBM cluster formation and P3HT crystallization during thermal annealing are investigated with optical microscopy and grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) and are found to be insufficient to explain the differences in device performance. A combination of atomic force microscopy (AFM), X‐ray reflectivity (XRR), and grazing‐incidence small‐angle X‐ray scattering (GISAXS) investigations results in detailed knowledge of the inner film morphology of P3HT:PCBM films. Vertical and lateral phase separation occurs during spin‐coating and annealing, depending on the solvent used. The findings are summarized in schematics and compared with the IV characteristics. The main influence on the photovoltaic performance arises from the vertical material composition and the existence of lateral phase separation fitting to the exciton diffusion length. Absorption and photoluminescence measurements complement the structural analysis.     

Pixel‐Structured Scintillator with Polymeric Microstructures for X‐Ray Image Sensors

We introduce a pixel‐structured scintillator realized on a flexible polymeric substrate and demonstrate its feasibility as an X‐ray converter when it is coupled to photosensitive elements. The sample was prepared by filling Gd₂O₂S:Tb scintillation material into a square‐pore‐shape cavity array fabricated with polyethylene. For comparison, a sample with the conventional continuous geometry was also prepared. Although the pixelated geometry showed X‐ray sensitivity of about 58% compared with the conventional geometry, the resolving power was improved by about 70% above a spatial frequency of 3 mm^?1. The spatial frequency at 10% of the modulation‐transfer function was about 6 mm^?1.     

Emerging In Situ and Operando Nanoscale X‐Ray Imaging Techniques for Energy Storage Materials

Electrical vehicles (EVs) are an attractive option for moving towards a CO₂ neutral transportation sector, but in order for widespread commercial use of EVs, the cost of electrical energy storage (i.e., batteries) must be reduced and the energy storage capacity must be increased. New, higher performing but Earth abundant electrodes are needed to accomplish this goal. To aid the development of these materials, in situ characterization to understand battery operation and failure is essential. Since electrodes are inherently heterogeneous, with a range of relevant length scales, imaging is a necessary component of the suite of characterization methods. In this Feature Article, the rapidly growing and developing field of X‐ray based microscopy (XM) techniques is described and reviewed focusing on in situ and operando adaptations. Further, in situ transmission electron microscopy (TEM) is briefly discussed in this context and its complement to XM is emphasized. Finally, a perspective is given on some emerging X‐ray based imaging approaches for energy storage materials.     

CO2‐Laser‐Induced Growth of Epitaxial Graphene on 6H‐SiC(0001)

The thermal decomposition of SiC surface provides, perhaps, the most promising method for the epitaxial growth of graphene on a material useful in the electronics platform. Currently, efforts are focused on a reliable method for the growth of large‐area, low‐strain epitaxial graphene that is still lacking. Here, a novel method for the fast, single‐step epitaxial growth of large‐area homogeneous graphene film on the surface of SiC(0001) using an infrared CO₂ laser (10.6 μm) as the heating source is reported. Apart from enabling extreme heating and cooling rates, which can control the stacking order of epitaxial graphene, this method is cost‐effective in that it does not necessitate SiC pre‐treatment and/or high vacuum, it operates at low temperature and proceeds in the second time scale, thus providing a green solution to EG fabrication and a means to engineering graphene patterns on SiC by focused laser beams. Uniform, low–strain graphene film is demonstrated by scanning electron microscopy, X‐ray photoelectron spectroscopy, secondary ion‐mass spectroscopy, and Raman spectroscopy. Scalability to industrial level of the method described here appears to be realistic, in view of the high rate of CO₂‐laser‐induced graphene growth and the lack of strict sample–environment conditions.     

Unusual Lattice‐Magnetism Connections in MnBi Nanorods

Lattice parameter, particle size, and thermal expansion results obtained from high‐temperature synchrotron transmission X‐ray diffraction are reported for magnetostructual NiAs‐type MnBi nanorods embedded in a Bi matrix. The structural data are consistent with elevated‐temperature magnetic measurements that indicate a first‐order nanorod Curie transition at 520 K, significantly depressed from the bulk MnBi Curie temperature of 633 K. The data suggest that the unit cell volume dependence of the magnetic behavior—also known as the volume exchange striction—of the MnBi compound is the determining factor underlying this phenomenon. The results imply that materials with magnetostructural transitions of technological interest may be altered by strain effects to tailor the interatomic distances towards the critical transition values.     

In Situ Observation of Strain Development and Porosity Evolution in Nanoporous Gold Foils

The formation of nanoporous gold by open circuit dealloying of 100 nm AgAu foils in nitric acid is investigated in situ and in real time by combining synchrotron small angle X‐ray scattering (SAXS) and X‐ray diffraction (XRD). The time dependence of the dealloying is followed as a function of acid concentration. For all concentrations, several characteristic dealloying stages are observed. Firstly, there is a fast initial dissolution stage with an increase in surface area due to pore and mound formation; this leads to strain in the nanoporous gold that results from an increase in capillary pressure. After dissolution is complete, there is rapid coarsening of the quasi‐periodic, pore–ligament morphology. During this later stage, we deduce strong strain anisotropies that can be explained by preferred crystallographic orientation of ligaments. This rapid coarsening stage is followed by a slow coarsening stage where the SAXS patterns, and hence the quasi‐periodic morphology, is self‐similar in time. There is a strong correlation between the morphology evolution and strain development, which can be explained by capillary forces.     

Neuroendocrine Tumor‐Targeted Upconversion Nanoparticle‐Based Micelles for Simultaneous NIR‐Controlled Combination Chemotherapy and Photodynamic Therapy,and Fluorescence Imaging

Although neuroendocrine tumors (NETs) are slow growing, they are frequently metastatic at the time of discovery and no longer amenable to curative surgery, emphasizing the need for the development of other treatments. In this study, multifunctional upconversion nanoparticle (UCNP)‐based theranostic micelles are developed for NET‐targeted and near‐infrared (NIR)‐controlled combination chemotherapy and photodynamic therapy (PDT), and bioimaging. The theranostic micelle is formed by individual UCNP functionalized with light‐sensitive amphiphilic block copolymers poly(4,5‐dimethoxy‐2‐nitrobenzyl methacrylate)‐polyethylene glycol (PNBMA‐PEG) and Rose Bengal (RB) photosensitizers. A hydrophobic anticancer drug, AB3, is loaded into the micelles. The NIR‐activated UCNPs emit multiple luminescence bands, including UV, 540 nm, and 650 nm. The UV peaks overlap with the absorption peak of photocleavable hydrophobic PNBMA segments, triggering a rapid drug release due to the NIR‐induced hydrophobic‐to‐hydrophilic transition of the micelle core and thus enabling NIR‐controlled chemotherapy. RB molecules are activated via luminescence resonance energy transfer to generate ¹O₂ for NIR‐induced PDT. Meanwhile, the 650 nm emission allows for efficient fluorescence imaging. KE108, a true pansomatostatin nonapeptide, as an NET‐targeting ligand, drastically increases the tumoral uptake of the micelles. Intravenously injected AB3‐loaded UCNP‐based micelles conjugated with RB and KE108—enabling NET‐targeted combination chemotherapy and PDT—induce the best antitumor efficacy.