Multi-Stage Phase-Segregation of Mixed Halide Perovskites under Illumination: A Quantitative Comparison of Experimental Observations and Thermodynamic Models

Photo- and charge-carrier-induced ion migration is a major challenge when utilizing metal halide perovskite semiconductors for optoelectronic applications. For mixed iodide/bromide perovskites, the compositional instability due to light- or electrical bias induced phase-segregation restricts the exploitation of the entire bandgap range. Previous experimental and theoretical work suggests that excited states or charge carriers trigger the process, but the exact mechanism is still under debate. To identify the mechanism and cause of light-induced phase-segregation phenomena, the full compositional range of methylammonium lead bromide/iodide samples are investigated, MAPb(Br_xI_1-x)₃ with x = 0…1, by simultaneous in situ X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy during illumination. The quantitative comparison of composition-dependent in situ XRD and PL shows that at excitation densities of 1 sun, only the initial stage of photo-segregation is rationalized with the previously established thermodynamic models. However, a progression of the phase segregation is observed that is rationalized by considering long-lived accumulative photo-induced material alterations. It is suggested that (additional) photo-induced defects, possibly halide vacancies and interstitials, need to be considered to fully rationalize light-induced phase segregation and anticipate the findings to provide crucial insight for the development of more sophisticated models.     

Nucleation Regulation and Anchoring of Halide Ions in All-Inorganic Perovskite Solar Cells Assisted by CuInSe2 Quantum Dots

Ionic feature of halide perovskites may lead to the formation of defect states in the polycrystalline films, which can deteriorate the device performance. To solve this issue, a low-temperature seed-assisted growth method can contribute to defect-passivated CsPbI_1.2Br_1.8 perovskite films by introducing CuInSe₂ quantum dots (QDs). As a result, the migration channels inside perovskite grains can be obviously suppressed, but few positive effects on the ions migration in grain boundaries. Conversely, this appearance demonstrate that the location of CuInSe₂ QDs is grain interior, but not grain boundary. Meanwhile, the lower defect density can help promoting device efficiency from 8.97% to 10.26%, which is among the high-efficiency level. Besides, this work can also provide an in-depth insight into the issue of photoinduced halide segregation.     

Low‐Bandgap Mixed Tin‐Lead Perovskites and Their Applications in All‐Perovskite Tandem Solar Cells

Efficient organic–inorganic metal halide perovskite absorbers have gained tremendous research interest in the past decade due to their super optoelectronic properties and defect tolerance. Lead (Pb) halide perovskites enable highly efficient perovskite solar cells (PSCs) with a record power conversion efficiency (PCE) of over 23%. However, the energy bandgaps of Pb halide perovskites are larger than the optimal bandgap for single junction solar cells, governed by the Shockley–Queisser (SQ) radiative limit. Mixed tin (Sn)‐Pb halide perovskites have drawn significant attention, since their bandgap can be tuned to below 1.2 eV, which opens a door for fabricating all‐perovskite tandem solar cells that can break the SQ radiative limit. This review summarizes the development of low‐bandgap mixed Sn‐Pb PSCs and their applications in all‐perovskite tandem solar cells. Its aim is to facilitate the development of new approaches to achieve high efficiency low‐bandgap single‐junction mixed Sn‐Pb PSCs and all‐perovskite tandem solar cells.     

Cover Picture: Excitonic and Vibrational Properties of Single‐Walled Semiconducting Carbon Nanotubes (Adv. Funct. Mater. 17/2007)

The cover picture illustrates excited state dynamics of semiconducting single‐walled carbon nanotubes studied theoretically. Sergai Tretiak and Svetlana Kilina report on p. 3405 that absorption of the light quantum leads to spatially delocalized photoexcitation, which can be described as tightly bound excitons and characterized by 2D plots of transition density. The photoexcitation is coupled to the vibrational degrees of freedom, leading to complex exciton‐phonon dynamics, which can be monitored experimentally using ultrafast spectroscopic probes. We review quantum‐chemical studies of the excited‐state electronic structure of finite‐size semiconducting single‐walled carbon nanotubes (SWCNTs) using methodologies previously successfully applied to describe conjugated polymers and other organic molecular materials. The results of our simulations are in quantitative agreement with available spectroscopic data and show intricate details of excited‐state properties and photoinduced vibrational dynamics in carbon nanotubes. We analyze in detail the nature of strongly bound first and second excitons in SWCNTs for a number of different tubes, emphasizing emerging size‐scaling laws. Characteristic delocalization properties of excited states are identified by the underlying photoinduced changes in charge densities and bond orders. Due to the rigid structure, exciton–phonon coupling is much weaker in SWCNTs compared to typical molecular materials. Yet we find that, in the ground state, a SWCNT's surface experiences the corrugation associated with electron–phonon interactions. Vibrational relaxation following photoexcitation reduces this corrugation, leading to a local distortion of the tube surface, which is similar to the formation of self‐trapped excitons in conjugated polymers. The calculated associated Stokes shift increases with enlargement of the tube diameters. Such exciton vibrational phenomena are possible to detect experimentally, allowing for better understanding of photoinduced electronic dynamics in nanotube materials.     

Precursor Solution Annealing Forms Cubic‐Phase Perovskite and Improves Humidity Resistance of Solar Cells

Solar cells with light‐absorbing layers comprising organometal halide perovskites have recently exceeded 22% efficiency. Despite high power‐conversion efficiencies, the stability of these devices, particularly when exposed to humidity and oxygen, remains poor. In the current study, a pathway to increase the stability of methylammonium lead iodide (CH₃NH₃PbI₃) based solar cells towards humidity is demonstrated, while maintaining the simplicity and solution‐processability of the active layers. Thermal annealing of the precursor solution prior to deposition induces the formation of cubic‐phase perovskite films in the solid state at room temperature. The experiments demonstrate that this improved ambient stability is correlated with the presence of the cubic phase at device operating temperatures, with the cubic phase resisting the formation of perovskite monohydrate—a pathway of degradation in conventionally processed perovskite thin films—on exposure to humidity.     

Cooling,Scattering, and Recombination—The Role of the Material Quality for the Physics of Tin Halide Perovskites

Tin‐based perovskites have long remained a side topic in current perovskite optoelectronic research. With the recent efficiency improvement in thin film solar cells and the observation of a long hot carrier cooling time in formamidinium tin iodide (FASnI₃), a thorough understanding of the material's photophysics becomes a pressing matter. Since pronounced background doping can easily obscure the actual material properties, it is of paramount importance to understand how different processing conditions affect the observed behavior. Using photoluminescence spectroscopy, thin films of FASnI₃ fabricated through different protocols are therefore investigated. It is shown that hot carrier relaxation occurs much faster in highly p‐doped films due to carrier–carrier scattering. From high quality thin films, the longitudinal optical phonon energy and the electron–phonon coupling constant are extracted, which are fundamental to understanding carrier cooling. Importantly, high quality films allow for the observation of a previously unreported state of microsecond lifetime at lower energy in FASnI₃, that has important consequences for the discussion of long lived emission in the field of metal halide perovskites.     

Stoichiometry Control for the Tuning of Grain Passivation and Domain Distribution in Green Quasi‐2D Metal Halide Perovskite Films and Light‐Emitting Diodes

Quasi‐2D metal halide perovskite films are promising for efficient light‐emitting diodes (LEDs), because of their efficient radiative recombination and suppressed trap‐assisted quenching compared with pure 3D perovskites. However, because of the multidomain polycrystalline nature of solution‐processed quasi‐2D perovskite films, the composition engineering always impacts the emitting properties with complicated mechanisms. Here, defect passivation and domain distribution of quasi‐2D perovskite films prepared with various precursor compositions are systematically studied. As a result, in perovskite films prepared from stoichiometric quasi‐2D precursor compositions, large organic ammonium cations function well as passivators. In comparison, precursor compositions of simply adding large organic halide salt into a 3D perovskite precursor ensure not only the defect passivation but also the effective formation of quasi‐2D perovskite domains, avoiding unfavorable appearance of low‐order domains. Quasi‐2D perovskite films fabricated with a well‐designed precursor composition achieve a high photoluminescence quantum yield of 95.3% and an external quantum efficiency of 14.7% in LEDs.     

Thermochromic Lead‐Free Halide Double Perovskites

Lead‐free halide double perovskites with diverse electronic structures and optical responses, as well as superior material stability show great promise for a range of optoelectronic applications. However, their large bandgaps limit their applications in the visible light range such as solar cells. In this work, an efficient temperature‐derived bandgap modulation, that is, an exotic fully reversible thermochromism in both single crystals and thin films of Cs₂AgBiBr₆ double perovskites is demonstrated. Along with the thermochromism, temperature‐dependent changes in the bond lengths of Ag? Br (R_{Ag? Br}) and Bi? Br (R_{Bi? Br}) are observed. The first‐principle molecular dynamics simulations reveal substantial anharmonic fluctuations of the R_{Ag? Br} and R_{Bi? Br} at high temperatures. The synergy of anharmonic fluctuations and associated electron–phonon coupling, and the peculiar spin–orbit coupling effect, is responsible for the thermochromism. In addition, the intrinsic bandgap of Cs₂AgBiBr₆ shows negligible changes after repeated heating/cooling cycles under ambient conditions, indicating excellent thermal and environmental stability. This work demonstrates a stable thermochromic lead‐free double perovskite that has great potential in the applications of smart windows and temperature sensors. Moreover, the findings on the structure modulation‐induced bandgap narrowing of Cs₂AgBiBr₆ provide new insights for the further development of optoelectronic devices based on the lead‐free halide double perovskites.     

Double Charge Transfer Dominates in Carrier Localization in Low Bandgap Sites of Heterogeneous Lead Halide Perovskites

Heterogeneous organic-inorganic halide perovskites possess inherent non-uniformities in bandgap that are sometimes engineered and exploited on purpose, like in quasi-2D perovskites. In these systems, charge carrier and excitation energy migration to lower-bandgap sites are key processes governing luminescence. The question, which of them dominates in particular materials and under specific experimental conditions, still remains unanswered, especially when charge carriers comprise excitons. In this study transient absorption (TA) and transient photoluminescence (PL) techniques are combined to address the excited state dynamics in quasi-2D and other heterogeneous perovskite structures in broad temperature range, from room temperature down to 15 K. The data provide clear evidence that charge carrier transfer rather than energy migration dominates in heterogeneous quasi-2D perovskite films.     

Low-Dimensional 2-thiopheneethylammonium Lead Halide Capping Layer Enables Efficient Single-Junction Methylamine-Free Wide-Bandgap and Tandem Perovskite Solar Cells

Wide-bandgap (WBG) perovskite solar cells (PSCs) have garnered significant attention for their potential applications in tandem solar cells. However, their large open-circuit voltage (V_OC) deficit and serious photo-induced halide segregation remain the main challenges that impede their applications. Herein, a post-treatment strategy without thermal annealing is presented to form a 2D top layer of 2-thiopheneethylammonium lead halide (n = 1) on WBG perovskites. This thermal annealing-free post-treatment method can more effectively passivate the defects of WBG methylamine (MA)-free formamidinium/cesium lead iodide/bromide perovskite films and suppress photo-induced perovskite phase segregation, as compared with the thermal annealing method that yields multi-2D phases. The resulting opaque and semi-transparent 1.66 eV-bandgap perovskite solar cells deliver maximum power conversion efficiencies of 21.47% (a small V_OC deficit of 0.43 V) and 19.11%, respectively, both of which are among the highest reports for inverted MA-free WBG PSCs. Consequently, four-terminal all-perovskite tandem cells realize a remarkable efficiency of 26.64%, showing great promise for their applications in efficient multi-junction tandem solar cells.     

Excitonic and Vibrational Properties of Single‐Walled Semiconducting Carbon Nanotubes

We review quantum‐chemical studies of the excited‐state electronic structure of finite‐size semiconducting single‐walled carbon nanotubes (SWCNTs) using methodologies previously successfully applied to describe conjugated polymers and other organic molecular materials. The results of our simulations are in quantitative agreement with available spectroscopic data and show intricate details of excited‐state properties and photoinduced vibrational dynamics in carbon nanotubes. We analyze in detail the nature of strongly bound first and second excitons in SWCNTs for a number of different tubes, emphasizing emerging size‐scaling laws. Characteristic delocalization properties of excited states are identified by the underlying photoinduced changes in charge densities and bond orders. Due to the rigid structure, exciton–phonon coupling is much weaker in SWCNTs compared to typical molecular materials. Yet we find that, in the ground state, a SWCNT's surface experiences the corrugation associated with electron–phonon interactions. Vibrational relaxation following photoexcitation reduces this corrugation, leading to a local distortion of the tube surface, which is similar to the formation of self‐trapped excitons in conjugated polymers. The calculated associated Stokes shift increases with enlargement of the tube diameters. Such exciton vibrational phenomena are possible to detect experimentally, allowing for better understanding of photoinduced electronic dynamics in nanotube materials.     

Activation of Self-Trapped Emission in Stable Bismuth-Halide Perovskite by Suppressing Strong Exciton–Phonon Coupling

All-inorganic bismuth-halide perovskites are promising alternatives for lead halide perovskites due to their admirable chemical stability and optoelectronic properties; however, these materials deliver inferior photoluminescence (PL) properties, severely hindering their prospects in lighting applications. Here, a novel air-stable but non-emissive perovskite Rb₃BiCl₆ is synthesized, and the material is used as a prototype to uncover origin of the poor optical performance in bismuth-halide perovskite. It is found that the extremely strong exciton–phonon interactions with a large coupling constant up to 693 meV leads to the seriously nonradiative recombination, which, however, can be effectively suppressed to 347 meV by introducing Sb³⁺ ions. As a result, Sb³⁺-doped Rb₃BiCl₆ exhibits a stable yellow emission with unprecedented PL quantum yield up to 33.6% from self-trapped excitons. Systematic spectroscopic characterizations and theoretical calculations are carried out to unveil the intriguing photophysical mechanisms. This work reveals the effect of exciton–phonon interaction, that is often underemphasized, on a material's photophysical properties.     

CsPbBr3 Nanocrystal Films: Deviations from Bulk Vibrational and Optoelectronic Properties

Metal‐halide perovskites (MHP) are highly promising semiconductors for light‐emitting and photovoltaic applications. The colloidal synthesis of nanocrystals (NCs) is an effective approach for obtaining nearly defect‐free MHP that can be processed into inks for low‐cost, high‐performance device fabrication. However, disentangling the effects of surface ligands, morphology, and boundaries on charge‐carrier transport in thin films fabricated with these high‐quality NCs is inherently difficult. To overcome this fundamental challenge, terahertz (THz) spectroscopy is employed to optically probe the photoconductivity of CsPbBr₃ NC films. The vibrational and optoelectronic properties of the NCs are compared with those of the corresponding bulk polycrystalline perovskite and significant deviations are found. Charge‐carrier mobilities and recombination rates are demonstrated to vary significantly with the NC size. Such dependences derive from the localized nature of charge carriers within NCs, with local mobilities dominating over interparticle transport. It is further shown that the colloidally synthesized NCs have distinct vibrational properties with respect to the bulk perovskite, exhibiting blue‐shifted optical phonon modes with enhanced THz absorption strength that also manifest as strong modulations in the THz photoconductivity spectra. Such fundamental insights into NC versus bulk properties will guide the optimization of nanocrystalline perovskite thin films for optoelectronic applications.     

Efficient Perovskite Light‐Emitting Diodes Using Polycrystalline Core–Shell‐Mimicked Nanograins

Making small nanograins in polycrystalline organic–inorganic halide perovskite (OIHP) films is critical to improving the luminescent efficiency in perovskite light‐emitting diodes (PeLEDs). 3D polycrystalline OIHPs have fundamental limitations related to exciton binding energy and exciton diffusion length. At the same time, passivating the defects at the grain boundaries is also critical when the grain size becomes smaller. Molecular additives can be incorporated to shield the nanograins to suppress defects at grain boundaries; however, unevenly distributed molecular additives can cause imbalanced charge distribution and inefficient local defect passivation in polycrystalline OIHP films. Here, a kinetically controlled polycrystalline organic‐shielded nanograin (OSN) film with a uniformly distributed organic semiconducting additive (2,2′,2′′‐(1,3,5‐benzinetriyl)‐tris(1‐phenyl‐1‐H‐benzimidazole), TPBI) is developed mimicking core–shell nanoparticles. The OSN film causes improved photophysical and electroluminescent properties with improved light out‐coupling by possessing a low refractive index. Finally, highly improved electroluminescent efficiencies of 21.81% ph el^?1 and 87.35 cd A^?1 are achieved with a half‐sphere lens and four‐time increased half‐lifetime in polycrystalline PeLEDs. This strategy to make homogeneous, defect‐healed polycrystalline core–shell‐mimicked nanograin film with better optical out‐coupling will provide a simple and efficient way to make highly efficient perovskite polycrystal films and their optoelectronics devices.     

Low‐Temperature Absorption,Photoluminescence, and Lifetime of CsPbX3 (X = Cl,Br, I) Nanocrystals

The absorption and photoluminescence, both steady‐state and time‐resolved, of CsPbX₃ (X = Cl, Br, I) nanocrystals are reported at temperatures ranging from 3 to 300 K. These measurements offer a unique window into the fundamental properties of this class of materials which is considered promising for light‐emitting and detection devices. The bandgaps are shown to increase from low to high temperature, and none of the examined cesium‐based perovskite nanocrystals exhibit a bandgap discontinuity in this temperature range suggesting constant crystal phase. Time‐resolved measurements show that the radiative lifetime of the band‐edge emission depends strongly on the halide ion and increases with heating. The increasing lifetime at higher temperatures is attributed primarily to free carriers produced from exciton fission, corroborated by the prevalence of excitonic character in absorption. The results particularly highlight many of the similarities in physical properties, such as low exciton binding energy and long lifetime, between CsPbI₃ and hybrid organic–inorganic plumbotrihalide perovskites.     

Low‐Dimensional Lead‐Free Inorganic Perovskites for Resistive Switching with Ultralow Bias

3D organic–inorganic and all‐inorganic lead halide perovskites have been intensively pursued for resistive switching memories in recent years. Unfortunately, instability and lead toxicity are two foremost challenges for their large‐scale commercial applications. Dimensional reduction and composition engineering are effective means to overcome these challenges. Herein, low‐dimensional inorganic lead‐free Cs₃Bi₂I₉ and CsBi₃I₁₀ perovskite‐like films are exploited for resistive switching memory applications. Both devices demonstrate stable switching with ultrahigh on/off ratios (≈10⁶), ultralow operation voltages (as low as 0.12 V), and self‐compliance characteristics. 0D Cs₃Bi₂I₉‐based device shows better retention time and larger reset voltage than the 2D CsBi₃I₁₀‐based device. Multilevel resistive switching behavior is also observed by modulating the current compliance, contributing to the device tunability. The resistive switching mechanism is hinged on the formation and rupture of conductive filaments of halide vacancies in the perovskite films, which is correlated with the formation of AgI_x layers at the electrode/perovskite interface. This study enriches the library of switching materials with all‐inorganic lead‐free halide perovskites and offers new insights on tuning the operation of solution‐processed memory devices.     

The Relationship between Chemical Flexibility and Nanoscale Charge Collection in Hybrid Halide Perovskites

Hybrid organometal halide perovskites are known for their excellent optoelectronic functionality as well as their wide‐ranging chemical flexibility. The composition of hybrid perovskite devices has trended toward increasing complexity as fine‐tuned properties are pursued, including multielement mixing on the constituents A and B and halide sites. However, this tunability presents potential challenges for charge extraction in functional devices. Poor consistency and repeatability between devices may arise due to variations in composition and microstructure. Within a single device, spatial heterogeneity in composition and phase segregation may limit the device from achieving its performance potential. This review details how the nanoscale elemental distribution and charge collection in hybrid perovskite materials evolve as chemical complexity increases, highlighting recent results using nondestructive operando synchrotron‐based X‐ray nanoprobe techniques. The results reveal a strong link between local chemistry and charge collection that must be controlled to develop robust, high‐performance hybrid perovskite materials for optoelectronic devices.     

Engineering the Exciton Dissociation in Quantum‐Confined 2D CsPbBr3 Nanosheet Films

Recent years have witnessed a rapid development of all‐inorganic halide perovskite in optoelectronic devices. Ultrathin 2D CsPbBr₃ nanosheets (NSs) with large lateral dimensions have demonstrated exceptional photophysical properties because of their analogous exciton electronic structure to quantum wells. Despite the incredible progress on device performance, the photophysics and carrier transportation parameters of quantum‐confined CsPbBr₃ NSs are lacking, and the fundamental understanding of the exciton dissociation mechanism is far less developed. Here, a ligands rearrangement mechanism is proposed to explain why annealed NS films have an increased charge transfer rate and a decreased exciton binding energy and lifetime, prompting tunneling as a dominant way of exciton dissociation to separate photogenerated excitons between neighboring NSs. This facile but efficient method provides a new insight to manipulate perovskite nanocrystals coupling. Moreover, ultrathin 2D CsPbBr₃ NS film is demonstrated to have a enhanced absorption cross section and high carrier mobility of 77.9 cm² V^?1 s^?1, contributing to its high responsivity of 0.53 A W^?1. The photodetector has a long‐term stability up to three months, which are responsible for reliable perovskite‐based device performance.     

Multifunctional Phosphorus‐Containing Lewis Acid and Base Passivation Enabling Efficient and Moisture‐Stable Perovskite Solar Cells

Multiple‐cation lead mixed‐halide perovskites (MLMPs) have been recognized as ideal candidates in perovskite solar cells in terms of high efficiency and stability due to decreased open‐circuit voltage loss and suppressed yellow phase formation. However, they still suffer from an unsatisfactory long‐term moisture stability. In this study, phosphorus‐containing Lewis acid and base molecules are employed to improve device efficiency and stability based on their multifunction including recombination reduction, phase segregation suppression, and moisture resistance. The strong fluorine‐containing Lewis acid treatment can achieve a champion PCE of 22.02%. Unencapsulated and encapsulated devices retain 63% and 80% of the initial efficiency after 14 days of aging under 75% and 85% relative humidity, respectively. The better passivation of Lewis acid implies more halide defects than Pb defects at the MLMP surface. This unbalanced defect type results from phase segregation that is the synergistic effect of Cs and halide ion migrations. Identifying defect type based on different passivation effects is beneficial to not only choose suitable passivators to boost the efficiency and slow down the moisture degradation of MLMP solar cells, but also to understand the mechanism of defect‐assisted moisture degradation.     

Domain Controlling by Compound Additive toward Highly Efficient Quasi-2D Perovskite Light-Emitting Diodes

Quasi-2D perovskites with enlarged exciton binding energy and tunable bandgap are appealing for application in perovskite light-emitting diodes (PeLEDs). However, wide n domains distribution is commonly formed in solution-processed quasi-2D perovskite films due to the uncontrollable crystallization behavior, which leads to low device performance. Here, the crystallization process is successfully regulated to narrow the n domains distribution by introducing compound additive of ZrO₂ nanoparticles (NPs) and Cryptand complexant. ZrO₂ NPs can avoid the segregation of organic large and small cations by strengthening the solvent extraction capacity of antisolvent, while Cryptand offsets the poor solubility of PbBr₂ by forming an intermediate state to slow down the crystallization of high-n domains. Consequently, both high photoluminescence quantum yields over 90% and a high external quantum efficiency of 21.2% are obtained in the optimized green quasi-2D PeLEDs. Moreover, the lifetime extends about four times compared with control devices. The strategy of domain controlling by compound additive provides a powerful way to develop high-performance quasi-2D perovskite optoelectrical devices.