Self‐Replenishing Dual Structured Superhydrophobic Coatings Prepared by Drop‐Casting of an All‐In‐One Dispersion

Robust dual structured superhydrophobic coatings which replenish spontaneously their surface chemical composition on new multi‐scale structured surfaces, recreated upon damage, are described. The surface repair occurs at room temperature, via intrinsic elements of the coatings, all covalently bonded. These coatings can be prepared from all‐in‐one dispersions by a simple drop‐cast method, with different thicknesses and on various substrates. The critical factors to optimize the self‐replenishment are described and three main design principles are postulated. The superhydrofobicity of the coatings is maintained even after 500 abrasion cycles. The principles reported can be extended towards self‐healing other surface‐dependent functionalities, that is, anti‐bacteria, anti‐fouling, or drag‐reduction, which will maintain high performance levels all through their life‐cycle with low cost and energy demand for maintenance and surface repair.     

All‐in‐One Theranostic Nanoplatform Based on Hollow TaOx for Chelator‐Free Labeling Imaging,Drug Delivery,and Synergistically Enhanced Radiotherapy

Despite extensive use of radiotherapy in cancer treatment, there has been huge demand to improve its efficacy and accuracy in tumor destruction. To this end, nanoparticle‐based radiosensitizers, particularly those with high‐Z elements, have been explored to enhance radiotherapy. Meanwhile, imaging is an essential tool prior to the individual planning of precise radiotherapy. Here, hollow tantalum oxide (H‐TaOx) nanoshells are prepared using a one‐pot template‐free method and then modified with polyethylene glycol (PEG), yielding H‐TaOx‐PEG nanoshells for imaging‐guided synergistically enhanced radiotherapy. H‐TaOx‐PEG nanoshells show strong intrinsic binding with metal ions such as Fe³⁺ and ^99mTc⁴⁺ upon simple mixing, enabling magnetic resonance imaging and single photon emission computed tomography imaging, respectively, which are able to track in vivo distribution of those nanoshells and locate the tumor. With mesoporous shells and large cavities, those H‐TaOx‐PEG nanoshells show efficient loading of 7‐ethyl‐10‐hydroxycamptothecin (SN‐38), a hydrophobic chemotherapeutic drug. By means of the radiosensitization effect of Ta to deposit X‐ray energy inside tumors, as well as SN‐38‐induced cell cycle arrest into radiation‐sensitive phases, H‐TaOx‐PEG@SN‐38 can offer remarkable synergistic therapeutic outcome in the combined chemoradiotherapy. Without appreciable systemic toxicity, such hollow‐TaOx nanostructure may therefore find promising applications in multimodal imaging and enhanced cancer radiotherapy.     

Tracking of Transplanted Human Mesenchymal Stem Cells in Living Mice using Near‐Infrared Ag2S Quantum Dots

Stem cell therapeutics has emerged as a novel regenerative therapy for tissue repair in the last decade. However, dynamically tracking the transplanted stem cells in vivo remains a grand challenge for stem cell‐based regeneration medicine in full understanding the function and the fate of the stem cells. Herein, Ag₂S quantum dots (QDs) in the second near‐infrared window (NIR‐II, 1.0–1.4 μm) are employed for dynamically tracking of human mesenchymal stem cells (hMSCs) in vivo with high sensitivity and high spatial and temporal resolution. As few as 1000 Ag₂S QDs‐labeled hMSCs are detectable in vivo and their fluorescence intensity can maintain up to 30 days. The in situ translocation and dynamic distribution of transplanted hMSCs in the lung and liver can be monitored up to 14 days with a temporal resolution of 100 ms. The in vivo high‐resolution imaging indicates the heparin‐facilitated translocation of hMSCs from lung to liver as well as the long‐term retention of hMSCs in the liver contribute to the treatment of liver failure. The novel NIR‐II imaging offers a possibility of tracking stem cells in living animals with both high spatial and temporal resolution, and encourages the future clinical applications in imaging‐guided cell therapies.     

2D and 3D Hybrid Systems for Enhancement of Chondrogenic Differentiation of Tonsil‐Derived Mesenchymal Stem Cells

2D/3D hybrid cell culture systems are constructed by increasing the temperature of the thermogelling poly(ethylene glycol)‐poly(l ‐alanine) diblock copolymer (PEG‐l ‐PA) aqueous solution in which tonsil tissue‐derived mesenchymal stem cells and graphene oxide (GO) or reduced graphene oxide (rGO) are suspended, to 37 °C. The cells exhibit spherical cell morphologies in 2D/3D hybrid culture systems of GO/PEG‐l ‐PA and rGO/PEG‐l ‐PA by using the growth medium. The cell proliferations are 30%–50% higher in the rGO/PEG‐l ‐PA hybrid system than in the GO/PEG‐l ‐PA hybrid system. When chondrogenic culture media enriched with TGF‐β3 is used in the 2D/3D hybrid systems, cells extensively aggregate, and the expression of chondrogenic biomarkers of SOX 9, COL II A1, COL II, and COL X significantly increases in the GO/PEG‐l ‐PA 2D/3D hybrid system as compared with the PEG‐l ‐PA 3D systems and rGO/PEG‐l ‐PA 2D/3D hybrid system, suggesting that the GO/PEG‐l ‐PA 2D/3D hybrid system can be an excellent candidate as a chondrogenic differentiation platform of the stem cell. This paper also suggests that a 2D/3D hybrid system prepared by incorporating 2D materials with various surface biofunctionalities in the in situ forming 3D hydrogel matrix can be a new cell culture system.     

Thermosensitive,Stretchable, and Piezoelectric Substrate for Generation of Myogenic Cell Sheet Fragments from Human Mesenchymal Stem Cells for Skeletal Muscle Regeneration

In a native muscle microenvironment, electrical and mechanical stimuli exist in the form of action potentials and muscle contraction. Here, a cell culture system is developed that can mimic the in vivo microenvironment and provide these stimuli to cultured cells, and it is tested whether the stimulation can promote myogenic differentiation of human umbilical cord blood mesenchymal stem cells (hUCBMSCs). A thermosensitive, stretchable, and piezoelectric substrate (TSPS) is fabricated by polydimethylsiloxane spin‐coating of aligned ZnO nanorods and subsequent poly(N‐isopropylacrylamide) grafting on the polydimethylsiloxane surface. Pulsatile mechanoelectrical cues are provided to hUCBMSCs cultured on the TSPS by subjecting the TSPS to cyclic stretching and bending, resulting in significant promotion of myogenic differentiation of hUCBMSCs as well as intracellular signaling related to the differentiation. After differentiation ex vivo, the cells are detached from the TSPS in the form of cell sheet fragments. Injection of the cell sheet fragments of differentiated cells into injured mouse skeletal muscle shows improved cell retention and muscle regeneration as compared to injection of either undifferentiated cells or differentiated dissociated cells. This system may serve as a tool for research on the electrical and mechanical regulation of stem cells and may be used to potentiate stem cell therapies.     

Self‐Doping Fullerene Electrolyte‐Based Electron Transport Layer for All‐Room‐Temperature‐Processed High‐Performance Flexible Polymer Solar Cells

To achieve high‐performance large‐area flexible polymer solar cells (PSCs), one of the challenges is to develop new interface materials that possess a thermal‐annealing‐free process and thickness‐insensitive photovoltaic properties. Here, an n‐type self‐doping fullerene electrolyte, named PCBB‐3N‐3I, is developed as electron transporting layer (ETL) for the application in PSCs. PCBB‐3N‐3I ETL can be processed at room temperature, and shows excellent orthogonal solvent processability, substantially improved conductivity, and appropriate energy levels. PCBB‐3N‐3I ETL also functions as light‐harvesting acceptor in a bilayer solar cell, contributing to the overall device performance. As a result, the PCBB‐3N‐3I ETL‐based inverted PSCs with a PTB7‐Th:PC₇₁BM photoactive layer demonstrate an enhanced power conversion efficiency (PCE) of 10.62% for rigid and 10.04% for flexible devices. Moreover, the device avoids a thermal annealing process and the photovoltaic properties are insensitive to the thickness of PCBB‐3N‐3I ETL, yielding a PCE of 9.32% for the device with thick PCBB‐3N‐3I ETL (61 nm). To the best of one's knowledge, the above performance yields the highest efficiencies for the flexible PSCs and thick ETL‐based PSCs reported so far. Importantly, the flexible PSCs with PCBB‐3N‐3I ETL also show robust bending durability that could pave the way for the future development of high‐performance flexible solar cells.     

Synergetic Targeted Delivery of Sleeping‐Beauty Transposon System to Mesenchymal Stem Cells Using LPD Nanoparticles Modified with a Phage‐Displayed Targeting Peptide

An important criterion for effective gene therapy is sufficient chromosomal integration activity. The Sleeping Beauty (SB) transposon system is a plasmid system allowing efficient insertion of transgenes into the host genome. However, such efficient insertion occurs only after the system is delivered to nuclei. Since transposons do not have the transducing abilities of viral vectors, efficient delivery of this system first into cells and then into cell nuclei is still a challenge. Here, a phage display technique using a major coat displayed phage library is employed to identify a peptide (VTAMEPGQ) that can home to rat mesenchymal stem cells (rMSCs). A nanoparticle, called liposome protamine/DNA lipoplex (LPD), is electrostatically assembled from cationic liposomes and an anionic complex of protamine, DNA and targeting peptides. Various peptides are enveloped inside the LPD to improve its targeting capability for rMSCs and nuclei. The rMSC‐targeting peptide and nuclear localization signal (NLS) peptide can execute the synergetic effect to promote transfection action of LPD. The homing peptide directs the LPD to target the MSCs, whereas the NLS peptide directs transposon to accumulate into nuclei once LPD is internalized inside the cells, leading to increased gene expression. This suggests that rMSC‐targeting peptide and NLS peptide within LPD can target to rMSCs and then guide transposon into nuclei. After entering the nuclei, SB transposon increase the insertion rates into cellular chromosomes. The targeting LPD does not show obvious cell toxicity and influence on the differentiation potential of rMSCs. Therefore, the integration of SB transposon and LPD system is a promising nonviral gene delivery vector in stem cell therapy.     

3D Superelastic Scaffolds Constructed from Flexible Inorganic Nanofibers with Self‐Fitting Capability and Tailorable Gradient for Bone Regeneration

Repair of bone defects with irregular shapes or at soft tissue insertion sites faces a huge challenge. Scaffolds capable of adapting to bone cavities, generating stiffness gradients, and inducing osteogenesis are necessary. Herein, a superelastic 3D ceramic fibrous scaffold is developed by assembly of intrinsically rigid, structurally flexible electrospun SiO₂ nanofibers with chitosan as bonding sites (SiO₂ NF‐CS) via a lyophilization technique. SiO₂ NF‐CS scaffolds exhibit excellent elasticity (full recovery from 80% compression), fast recovery rate (>500 mm min^?1), and good fatigue resistance (>10 000 cycles of compression) in an aqueous medium. SiO₂ NF‐CS scaffolds induce human mesenchymal stem cell (hMSC) elongation and differentiation into osteoblasts. In vivo self‐fitting capability is demonstrated by implanting compressed SiO₂ NF‐CS scaffolds into different shaped mandibular defects in rabbits, with a spontaneous recovery and full filling of defects. Rat calvarial defect repair validates enhanced bone formation and vascularization by cell (hMSC) histomorphology analysis. Further, subchondral bone scaffolds with gradations in SiO₂ nanofibers are developed, leading to a stiffness gradient and spatially chondrogenic and osteogenic differentiation of hMSCs. This work presents a type of 3D ceramic fibrous scaffold, which can closely match bone defects with irregular shapes or at different implant sites, and is promising for clinical translation.     

Ferrimagnetic Nanochains‐Based Mesenchymal Stem Cell Engineering for Highly Efficient Post‐Stroke Recovery

Unsatisfactory post‐stroke recovery has long been a negative factor in the prognosis of ischemic stroke due to the lack of pharmacological treatments. Mesenchymal stem cells (MSCs)‐based therapy has recently emerged as a promising strategy redefining stroke treatment; however, its effectiveness has been largely restricted by insufficient therapeutic gene expression and inadequate cell numbers in the ischemic cerebrum. Herein, a non‐viral and magnetic field‐independent gene transfection approach is reported, using magnetosome‐like ferrimagnetic iron oxide nanochains (MFIONs), to genetically engineer MSCs for highly efficient post‐stroke recovery. The 1D MFIONs show efficient cellular uptake by MSCs, which results in highly efficient genetic engineering of MSCs to overexpress brain‐derived neurotrophic factor for treating ischemic cerebrum. Moreover, the internalized MFIONs promote the homing of MSCs to the ischemic cerebrum by upregulating CXCR4. Consequently, a pronounced recovery from ischemic stroke is achieved using MFION‐engineered MSCs in a mouse model.     

Black‐Phosphorus‐Incorporated Hydrogel as a Conductive and Biodegradable Platform for Enhancement of the Neural Differentiation of Mesenchymal Stem Cells

Conductive hydrogel scaffolds have important applications for electroactive tissue repairs. However, the development of conductive hydrogel scaffolds tends to incorporate nonbiodegradable conductive nanomaterials that will remain in the human body as foreign matters. Herein, a biodegradable conductive hybrid hydrogel is demonstrated based on the integration of black phosphorus (BP) nanosheets into the hydrogel matrix. To address the challenge of applying BP nanosheets in tissue engineering due to its intrinsic instability, a polydopamine (PDA) modification method is developed to improve the stability. Moreover, PDA modification also enhances interfacial bonding between pristine BP nanosheets and the hydrogel matrix. The incorporation of polydopamine‐modified black phosphorous (BP@PDA) nanosheets into the gelatin methacryloyl (GelMA) hydrogels significantly enhances the electrical conductivity of the hydrogels and improves the cell migration of mesenchymal stem cells (MSCs) within the 3D scaffolds. On the basis of the gene expression and protein level assessments, the BP@PDA‐incorporated GelMA scaffold can significantly promote the differentiation of MSCs into neural‐like cells under the synergistic electrical stimulation. This strategy of integrating biodegradable conductive BP nanomaterials within a biocompatible hydrogel provides a new insight into the design of biomaterials for broad applications in tissue engineering of electroactive tissues, such as neural, cardiac, and skeletal muscle tissues.     

Self‐Supporting Graphene Hydrogel Film as an Experimental Platform to Evaluate the Potential of Graphene for Bone Regeneration

Graphene, a two dimensional carbonaceous material possessing a range of extraordinary properties, is considered promising for biomedical applications. Here, a simple form of graphene‐based bulk material–self‐supporting graphene hydrogel (SGH) film is used as a suitable platform to study the intrinsic properties of graphene both in vitro and in vivo. The free‐standing film show good cell adhesion, spreading, and proliferation. Films are implanted into subcutaneous sites of rats, and produce minimal fibrous capsule formation, and mild host tissue response in vivo. New blood vessel formation is also seen. The films swell and cracked in vivo, indicating the beginning of degradation. Of particular interest is that the film alone is found to be able to stimulate osteogenic differentiation of stem cells, without additional inducer, both in vitro and in vivo. Thus, this SGH film appears to be highly biocompatible and osteoinductive, demonstrating graphene's potential for bone regenerative medicine.     

Self‐Assembled Injectable Nanocomposite Hydrogels Stabilized by Bisphosphonate‐Magnesium (Mg2+) Coordination Regulates the Differentiation of Encapsulated Stem Cells via Dual Crosslinking

Nanocomposite hydrogels consist of a polymer matrix embedded with nanoparticles (NPs), which provide the hydrogels with unique bioactivities and mechanical properties. Incorporation of NPs via in situ precipitation in the polymer matrix further enhances these desirable hydrogel properties. However, the noncytocompatible pH, osmolality, and lengthy duration typically required for such in situ precipitation strategies preclude cell encapsulation in the resultant hydrogels. Bisphosphonate (BP) exhibits a variety of specific bioactivities and excellent binding affinity to multivalent cations such as magnesium ions (Mg²⁺). Here, the preparation of nanocomposite hydrogels via self‐assembly driven by bisphosphonate‐Mg²⁺ coordination is described. Upon mixing solutions of polymer bearing BPs, BP monomer (Ac‐BP), and Mg²⁺, this effective and dynamic coordination leads to the rapid self‐assembly of Ac‐BP‐Mg NPs which function as multivalent crosslinkers stabilize the resultant hydrogel structure at physiological pH. The obtained nanocomposite hydrogels are self‐healing and exhibit improved mechanical properties compared to hydrogels prepared by blending prefabricated NPs. Importantly, the hydrogels in this study allow the encapsulation of cells and subsequent injection without compromising the viability of seeded cells. Furthermore, the acrylate groups on the surface of Ac‐BP‐Mg NPs enable facile temporal control over the stiffness and crosslinking density of hydrogels via UV‐induced secondary crosslinking, and it is found that the delayed introduction of this secondary crosslinking enhances cell spreading and osteogenesis.     

Injectable Stem Cell‐Laden Photocrosslinkable Microspheres Fabricated Using Microfluidics for Rapid Generation of Osteogenic Tissue Constructs

Direct injection is a minimally invasive method of stem cell transplantation for numerous injuries and diseases. However, despite its promising potential, its clinical translation is difficult due to the low cell retention and engraftment after injection. With high versatility, high‐resolution control and injectability, microfabrication of stem‐cell laden biomedical hydrogels holds great potential as minimally invasive technology. Herein, a strategy of microfluidics‐assisted technology entrapping bone marrow‐derived mesenchymal stem cells (BMSCs) and growth factors in photocrosslinkable gelatin (GelMA) microspheres to ultimately generate injectable osteogenic tissue constructs is presented. Additionally, it is demonstrated that the GelMA microspheres can sustain stem cell viability, support cell spreading inside the microspheres and migration from the interior to the surface as well as enhance cell proliferation. This finding shows that encapsulated cells have the potential to directly and actively participate in the regeneration process. Furthermore, it is found that BMSCs encapsulated in GelMA microspheres show enhanced osteogenesis in vitro and in vivo, associated with a significant increase in mineralization. In short, the proposed strategy can be utilized to facilitate bone regeneration with minimum invasiveness, and can potentially be applied along with other matrices for extended applications.     

Self‐Additive Low‐Dimensional Ruddlesden–Popper Perovskite by the Incorporation of Glycine Hydrochloride for High‐Performance and Stable Solar Cells

The recent rise of low‐dimensional Ruddlesden–Popper (RP) perovskites is notable for superior humidity stability, however they suffer from low power conversion efficiency (PCE). Suitable organic spacer cations with special properties display a critical effect on the performance and stability of perovskite solar cells (PSCs). Herein, a new strategy of designing self‐additive low‐dimensional RP perovskites is first proposed by employing a glycine salt (Gly⁺) with outstanding additive effect to improve the photovoltaic performance. Due to the strong interaction between C?O and Pb²⁺, the Gly⁺ can become a nucleation center and be beneficial to uniform and fast growth of the Gly‐based RP perovskites with larger grain sizes, leading to reduced grain boundary and increased carrier transport. As a result, the Gly‐based self‐additive low‐dimensional RP perovskites exhibit remarkable photoelectric properties, yielding the highest PCE of 18.06% for Gly (n = 8) devices and 15.61% for Gly (n = 4) devices with negligible hysteresis. Furthermore, the Gly‐based devices without encapsulation show excellent long‐term stability against humidity, heat, and UV light in comparison to BA‐based low‐dimensional PSCs. This approach provides a feasible design strategy of new‐type low‐dimensional RP perovskites to obtain highly efficient and stable devices for next‐generation photovoltaic applications.     

Covalently Adaptable Elastin‐Like Protein–Hyaluronic Acid (ELP–HA) Hybrid Hydrogels with Secondary Thermoresponsive Crosslinking for Injectable Stem Cell Delivery

Shear‐thinning, self‐healing hydrogels are promising vehicles for therapeutic cargo delivery due to their ability to be injected using minimally invasive surgical procedures. An injectable hydrogel using a novel combination of dynamic covalent crosslinking with thermoresponsive engineered proteins is presented. Ex situ at room temperature, rapid gelation occurs through dynamic covalent hydrazone bonds by simply mixing two components: hydrazine‐modified elastin‐like protein (ELP) and aldehyde‐modified hyaluronic acid. This hydrogel provides significant mechanical protection to encapsulated human mesenchymal stem cells during syringe needle injection and rapidly recovers after injection to retain the cells homogeneously within a 3D environment. In situ, the ELP undergoes a thermal phase transition, as confirmed by coherent anti‐Stokes Raman scattering microscopy observation of dense ELP thermal aggregates. The formation of the secondary network reinforces the hydrogel and results in a tenfold slower erosion rate compared to a control hydrogel without secondary thermal crosslinking. This improved structural integrity enables cell culture for three weeks postinjection, and encapsulated cells maintain their ability to differentiate into multiple lineages, including chondrogenic, adipogenic, and osteogenic cell types. Together, these data demonstrate the promising potential of ELP–HA hydrogels for injectable stem cell transplantation and tissue regeneration.     

MRI/SPECT/Fluorescent Tri‐Modal Probe for Evaluating the Homing and Therapeutic Efficacy of Transplanted Mesenchymal Stem Cells in a Rat Ischemic Stroke Model

Quantitatively tracking engraftment of intracerebrally or intravenously transplanted stem cells and evaluating their concomitant therapeutic efficacy for stroke has been a challenge in the field of stem cell therapy. In this study, first, an MRI/SPECT/fluorescent tri‐modal probe (¹²⁵I‐fSiO4@SPIOs) is synthesized for quantitatively tracking mesenchymal stem cells (MSCs) transplanted intracerebrally or intravenously into stroke rats, and then the therapeutic efficacy of MSCs delivered by both routes and the possible mechanism of the therapy are evaluated. It is demonstrated that ⁽¹²⁵⁾I‐fSiO4@SPIOs have high efficiency for labeling MSCs without affecting their viability, differentiation, and proliferation capacity , and found that 35% of intracerebrally injected MSCs migrate along the corpus callosum to the lesion area, while 90% of intravenously injected MSCs remain trapped in the lung at 14 days after MSC transplantation. However, neurobehavioral outcomes are significantly improved in both transplantation groups, which are accompanied by increases of vascular endothelial growth factor, basic fibroblast growth factor, and tissue inhibitor of metalloproteinases‐3 in blood, lung, and brain tissue (p < 0.05). The study demonstrates that ¹²⁵I‐fSiO4@SPIOs are robust probe for long‐term tracking of MSCs in the treatment of ischemic brain and MSCs delivered via both routes improve neurobehavioral outcomes in ischemic rats.