High‐Performance Ultrathin Flexible Solid‐State Supercapacitors Based on Solution Processable Mo1.33C MXene and PEDOT:PSS

MXenes, a young family of 2D transition metal carbides/nitrides, show great potential in electrochemical energy storage applications. Herein, a high performance ultrathin flexible solid‐state supercapacitor is demonstrated based on a Mo_1.33C MXene with vacancy ordering in an aligned layer structure MXene/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) composite film posttreated with concentrated H₂SO₄. The flexible solid‐state supercapacitor delivers a maximum capacitance of 568 F cm^?3, an ultrahigh energy density of 33.2 mWh cm^?3 and a power density of 19 470 mW cm^?3. The Mo_1.33C MXene/PEDOT:PSS composite film shows a reduction in resistance upon H₂SO₄ treatment, a higher capacitance (1310 F cm^?3) and improved rate capabilities than both pristine Mo_1.33C MXene and the nontreated Mo_1.33C/PEDOT:PSS composite films. The enhanced capacitance and stability are attributed to the synergistic effect of increased interlayer spacing between Mo_1.33C MXene layers due to insertion of conductive PEDOT, and surface redox processes of the PEDOT and the MXene.     

Nitrogen‐Enriched Nonporous Carbon Electrodes with Extraordinary Supercapacitance

Nitrogen‐enriched nonporous carbon materials derived from melamine–mica composites are subjected to ammonia treatment to further increase the nitrogen content. For samples preoxidized prior to the ammonia treatment, the nitrogen content is doubled and is mainly incorporated in pyrrol‐like groups. The materials are tested as electrodes for supercapacitors, and in acidic or basic electrolytes, the gravimetric capacitance of treated samples is three times higher than that of untreated samples. This represents a tenfold increase of the capacitance per surface area (3300 µF cm^?2) in basic electrolyte. Due to the small volume of the carbon materials, high volumetric capacitances are achieved in various electrolytic systems: 280 F cm^?3 in KOH, 152 F cm^?3 in H₂SO₄, and 92 F cm^?3 in tetraethylammonium tetrafluoroborate/propylene carbonate.     

Stamping of Flexible,Coplanar Micro‐Supercapacitors Using MXene Inks

The fast growth of portable smart electronics and internet of things have greatly stimulated the demand for miniaturized energy storage devices. Micro‐supercapacitors (MSCs), which can provide high power density and a long lifetime, are ideal stand‐alone power sources for smart microelectronics. However, relatively few MSCs exhibit both high areal and volumetric capacitance. Here rapid production of flexible MSCs is demonstrated through a scalable, low‐cost stamping strategy. Combining 3D‐printed stamps with arbitrary shapes and 2D titanium carbide or carbonitride inks (Ti₃C₂T_x and Ti₃CNT_x, respectively, known as MXenes), flexible all‐MXene MSCs with controlled architectures are produced. The interdigitated Ti₃C₂T_x MSC exhibits high areal capacitance: 61 mF cm^?2 at 25 µA cm^?2 and 50 mF cm^?2 as the current density increases by 32 fold. The Ti₃C₂T_x MSCs also showcase capacitive charge storage properties, good cycling lifetime, high energy and power densities, etc. The production of such high‐performance Ti₃C₂T_x MSCs can be easily scaled up by designing pad or cylindrical stamps, followed by a cold rolling process. Collectively, the rapid, efficient production of flexible all‐MXene MSCs with state‐of‐the‐art performance opens new exciting opportunities for future applications in wearable and portable electronics.     

Scalable Production of Graphene Inks via Wet‐Jet Milling Exfoliation for Screen‐Printed Micro‐Supercapacitors

The miniaturization of energy storage units is pivotal for the development of next‐generation portable electronic devices. Micro‐supercapacitors (MSCs) hold great potential to work as on‐chip micro‐power sources and energy storage units complementing batteries and energy harvester systems. Scalable production of supercapacitor materials with cost‐effective and high‐throughput processing methods is crucial for the widespread application of MSCs. Here, wet‐jet milling exfoliation of graphite is reported to scale up the production of graphene as a supercapacitor material. The formulation of aqueous/alcohol‐based graphene inks allows metal‐free, flexible MSCs to be screen‐printed. These MSCs exhibit areal capacitance (C_areal) values up to 1.324 mF cm^?2 (5.296 mF cm^?2 for a single electrode), corresponding to an outstanding volumetric capacitance (C_vol) of 0.490 F cm^?3 (1.961 F cm^?3 for a single electrode). The screen‐printed MSCs can operate up to a power density above 20 mW cm^?2 at an energy density of 0.064 µWh cm^?2. The devices exhibit excellent cycling stability over charge–discharge cycling (10 000 cycles), bending cycling (100 cycles at a bending radius of 1 cm) and folding (up to angles of 180°). Moreover, ethylene vinyl acetate‐encapsulated MSCs retain their electrochemical properties after a home‐laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics.     

Reusable Cellulose‐Based Hydrogel Sticker Film Applied as Gate Dielectric in Paper Electrolyte‐Gated Transistors

A new concept for reusable eco‐friendly hydrogel electrolytes based on cellulose is introduced. The reported electrolytes are designed and engineered through a simple, fast, low‐cost, and eco‐friendly dissolution method of microcrystalline cellulose at low temperature using an aqueous LiOH/urea solvent system. The cellulose solution is combined with carboxymethyl cellulose, followed by the regeneration and simultaneous ion incorporation. The produced free standing cellulose‐based electrolyte films exhibit interesting properties for application in flexible electrochemical devices, such as biosensors or electrolyte‐gated transistors (EGTs), because of their high specific capacitances (4–5 µF cm^?2), transparency, and flexibility. Indium–gallium–zinc‐oxide EGTs on glass with laminated cellulose‐based hydrogel electrolytes (CHEs) as the gate dielectric are produced presenting a low working voltage (<2 V), showing an on–off current ratio (I _on/off) of 10⁶, a subthreshold swing lower than 0.2 V dec^?1, and saturation mobility (μ_Sat) reaching 26 cm² V^?1 s^?1. The flexible CHE‐gated transistors on paper are also demonstrated, which operate at switching frequencies up to 100 Hz. Combining the flexibility of the EGTs on paper with the reusability of the developed CHEs is a breakthrough toward biodegradable advanced functional materials allied with disposable/recyclable and low‐cost electronic devices.     

Inkjet Printing of Self‐Assembled 2D Titanium Carbide and Protein Electrodes for Stimuli‐Responsive Electromagnetic Shielding

2D titanium carbides (MXene) possess significant characteristics including high conductivity and electromagnetic interference shielding efficiency (EMI SE) that are important for applications in printed and flexible electronics. However, MXene‐based ink formulations are yet to be demonstrated for proper inkjet printing of MXene patterns. Here, tandem repeat synthetic proteins based on squid ring teeth (SRT) are employed as templates of molecular self‐assembly to engineer MXene inks that can be printed as stimuli‐responsive electrodes on various substrates including cellulose paper, glass, and flexible polyethylene terephthalate (PET). MXene electrodes printed on PET substrates are able to display electrical conductivity values as high as 1080 ± 175 S cm^?1, which significantly exceeds electrical conductivity values of state‐of‐the‐art inkjet‐printed electrodes composed of other 2D materials including graphene (250 S cm^?1) and reduced graphene oxide (340 S cm^?1). Furthermore, this high electrical conductivity is sustained under excessive bending deformation. These flexible electrodes also exhibit effective EMI SE values reaching 50 dB at films with thicknesses of 1.35 µm, which mainly originate from their high electrical conductivity and layered structure.     

Phthalocyanine‐Based 2D Conjugated Metal‐Organic Framework Nanosheets for High‐Performance Micro‐Supercapacitors

2D conjugated metal‐organic frameworks (2D c‐MOFs) are emerging as a novel class of conductive redox‐active materials for electrochemical energy storage. However, developing 2D c‐MOFs as flexible thin‐film electrodes have been largely limited, due to the lack of capability of solution‐processing and integration into nanodevices arising from the rigid powder samples by solvothermal synthesis. Here, the synthesis of phthalocyanine‐based 2D c‐MOF (Ni₂[CuPc(NH)₈]) nanosheets through ball milling mechanical exfoliation method are reported. The nanosheets feature with average lateral size of ≈160 nm and mean thickness of ≈7 nm (≈10 layers), and exhibit high crystallinity and chemical stability as well as a p‐type semiconducting behavior with mobility of ≈1.5 cm² V^?1 s^?1 at room temperature. Benefiting from the ultrathin feature, the nanosheets allow high utilization of active sites and facile solution‐processability. Thus, micro‐supercapacitor (MSC) devices are fabricated mixing Ni₂[CuPc(NH)₈] nanosheets with exfoliated graphene, which display outstanding cycling stability and a high areal capacitance up to 18.9 mF cm^?2; the performance surpasses most of the reported conducting polymers‐based and 2D materials‐based MSCs.     

Engineering the Interlayer Spacing by Pre-Intercalation for High Performance Supercapacitor MXene Electrodes in Room Temperature Ionic Liquid

MXenes exhibit excellent capacitance at high scan rates in sulfuric acid aqueous electrolytes, but the narrow potential window of aqueous electrolytes limits the energy density. Organic electrolytes and room-temperature ionic liquids (RTILs) can provide higher potential windows, leading to higher energy density. The large cation size of RTIL hinders its intercalation in-between the layers of MXene limiting the specific capacitance in comparison to aqueous electrolytes. In this work, different chain lengths alkylammonium (AA) cations are intercalated into Ti₃C₂T_x, producing variation of MXene interlayer spacings (d-spacing). AA-cation-intercalated Ti₃C₂T_x (AA-Ti₃C₂), exhibits higher specific capacitances, and cycling stabilities than pristine Ti₃C₂T_x in 1 m 1-ethly-3-methylimidazolium bis-(trifluoromethylsulfonyl)-imide (EMIMTFSI) in acetonitrile and neat EMIMTFSI RTIL electrolytes. Pre-intercalated MXene with an interlayer spacing of ≈2.2 nm, can deliver a large specific capacitance of 257 F g⁻¹ (1428 mF cm⁻² and 492 F cm⁻³) in neat EMIMTFSI electrolyte leading to high energy density. Quasi elastic neutron scattering and electrochemical impedance spectroscopy are used to study the dynamics of confined RTIL in pre-intercalated MXene. Molecular dynamics simulations suggest significant differences in the structures of RTIL ions and AA cations inside the Ti₃C₂T_x interlayer, providing insights into the differences in the observed electrochemical behavior.     

High‐Performance Wearable Micro‐Supercapacitors Based on Microfluidic‐Directed Nitrogen‐Doped Graphene Fiber Electrodes

Fiber‐shaped micro‐supercapacitors (micro‐SCs) have attracted enormous interest in wearable electronics due to high flexibility and weavability. However, they usually present a low energy density because of inhomogeneity and less pores. Here, we demonstrate a microfluidic‐directed strategy to synthesize homogeneous nitrogen‐doped porous graphene fibers. The porous fibers‐based micro‐SCs utilize solid‐state phosphoric acid/polyvinyl alcohol (H₃PO₄/PVA) and 1‐ethyl‐3‐methylimidazolium tetrafluoroborate/poly(vinylidenefluoride‐co‐hexafluoropropylene) (EMIBF₄/PVDF‐HFP) electrolytes, which show significant improvements in electrochemical performances. Ultralarge capacitance (1132 mF cm^?2), high cycling‐stability, and long‐term bending‐durability are achieved based on H₃PO₄/PVA. Additionally, high energy densities of 95.7–46.9 µWh cm^?2 at power densities of 1.5–15 W cm^?2 are obtained in EMIBF₄/PVDF‐HFP. The key to higher performances stems from microfluidic‐controlled fibers with a uniformly porous network, large specific surface area (388.6 m² g^?1), optimal pyridinic nitrogen (2.44%), and high electric conductivity (30785 S m^?1) for faster ion diffusion and flooding accommodation. By taking advantage of these remarkable merits, this study integrates micro‐SCs into flexible and fabric substrates to power audio–visual electronics. The main aim is to clarify the important role of microfluidic techniques toward the architecture of electrodes and promote development of wearable electronics.     

Achieving of Flexible,Free‐Standing,Ultracompact Delaminated Titanium Carbide Films for High Volumetric Performance and Heat‐Resistant Symmetric Supercapacitors

The volumetric performance of supercapacitors (SCs), besides the gravimetric performance, is attracting an increasing attention due to the fast development of electric vehicles and smart devices. Here, a unique design of symmetric supercapacitor material is reported with a tight face‐to‐face architecture by applying a high pressure to the delaminated Ti₃C₂ (d‐Ti₃C₂) films. The high pressure makes the d‐Ti₃C₂ films achieve an increased density, high electron conductivity, good wettability, and abundant interconnected mesopore channels to promote ion transport efficiently, that is, more cations can intercalate/deintercalate in the charging–discharging process. As a result, with the increase of the applying pressure, the d‐Ti₃C₂ film pressured at 40 MPa in 1 m Li₂SO₄ exhibits an ultrahigh capacitance of over 633 F cm^?3, outstanding energy density, and cyclic stability. Especially, the corresponding SC in 1 m 1‐ethyl‐3‐methylimidazolium tetrafluoroborate/acetonitrile organic electrolyte shows a high volumetric energy density of 41 Wh L^?1, which is the highest value reported for the SCs based on MXene materials in organic electrolytes. The outstanding volumetric electrochemical performance and thermal stability of the SCs based on the ultracompact d‐Ti₃C₂ film demonstrate their promising potential as forceful power sources for small electronic devices.     

Electronic Structure Regulation of Layered Vanadium Oxide via Interlayer Doping Strategy toward Superior High‐Rate and Low‐Temperature Zinc‐Ion Batteries

Currently, development of suitable cathode materials for zinc‐ion batteries (ZIBs) is plagued by the sluggish kinetics of Zn²⁺ with multivalent charge in the host structure. Herein, it is demonstrated that interlayer Mn²⁺‐doped layered vanadium oxide (Mn_0.15V₂O₅·nH₂O) composites with narrowed direct bandgap manifest greatly boosted electrochemical performance as zinc‐ion battery cathodes. Specifically, the Mn_0.15V₂O₅·nH₂O electrode shows a high specific capacity of 367 mAh g^?1 at a current density of 0.1 A g^?1 as well as excellent retentive capacities of 153 and 122 mAh g^?1 after 8000 cycles at high current densities up to 10 and 20 A g^?1, respectively. Even at a low temperature of ?20 °C, a reversible specific capacity of 100 mAh g^?1 can be achieved at a current density of 2.0 A g^?1 after 3000 cycles. The superior electrochemical performance originates from the synergistic effects between the layered nanostructures and interlayer doping of Mn²⁺ ions and water molecules, which can enhance the electrons/ions transport kinetics and structural stability during cycling. With the aid of various ex situ characterization technologies and density functional theory calculations, the zinc‐ion storage mechanism can be revealed, which provides fundamental guidelines for developing high‐performance cathodes for ZIBs.     

Alternating‐Current MXene Polymer Light‐Emitting Diodes

MXenes (Ti₃C₂) are 2D transition‐metal carbides and carbonitrides with high conductivity and optical transparency. However, transparent MXene electrodes suitable for polymer light‐emitting diodes (PLEDs) have rarely been demonstrated. With the discovery of the excellent electrical stability of MXene under an alternating current (AC), herein, PLEDs that employ MXene electrodes and exhibit high performance under AC operation (AC MXene PLEDs) are presented. The PLED exhibits a turn‐on voltage, current efficiency, and brightness of 2.1 V, 7 cd A^?1, and 12 547 cd m^?2, respectively, when operated under AC with a frequency of 1 kHz. The results indicate that the undesirable electric breakdown associated with heat arising from the poor interface of the MXene with a hole transport layer in the direct‐current mode is efficiently suppressed by the transient injection of carriers accompanied by the alternating change of the electric polarity under the AC, giving rise to reliable light emission with a high efficiency. The solution‐processable MXene electrode can be readily fabricated on a flexible polymer substrate, allowing for the development of a mechanically flexible AC MXene PLED with a higher performance than flexible PLEDs employing solution‐processed nanomaterial‐based electrodes such as carbon nanotubes, reduced graphene oxide, and Ag nanowires.     

Interlayer Injection of Low-Valence Zn Atoms to Activate MXene-Based Micro-Redox Capacitors With Battery-Type Voltage Plateaus

Insufficient and unstable energy output is the bottleneck issue radically restricting the application of micro-supercapacitors (MSCs). Herein, an interlayer atom injection strategy that can anchor low-valence Zn atoms (Zn^δ+, 0 < δ <2) on O-terminals of Ti₃C₂T_x (MXene) flakes within the MXene/silver-nanowires hybrid cathode of symmetric MSCs is first presented. Combining the polyacrylamide/ZnCl₂ hydrogel electrolyte rich in Cl⁻ and Zn²⁺ ions, the matched Zn^δ+/Zn²⁺ (−0.76 V vs SHE) and Ag/AgCl (0.23 V vs SHE), redox couples between the symmetrical electrodes are activated to offer faradaic charge storage beside ions-intercalation involved pseudocapacitance. Thus, a battery-type voltage plateau (≈0.9 V) appears in the discharge curve of a fabricated pseudo-symmetric micro-redox capacitor, simultaneously achieving energy density enhancement (117 µWh cm⁻² at 0.5 mA cm⁻²) and substantially improved power output stability (46% of the energy from the plateau region) relative to that before activation (98 µWh cm⁻² without voltage platform). The work provides a fire-new strategy to overcome the performance bottlenecks confronting conventional MSCs.     

Revealing the Pseudo‐Intercalation Charge Storage Mechanism of MXenes in Acidic Electrolyte

Since the discovery of Ti₃C₂T_x in 2011, the family of two‐dimensional transition metal carbides, carbonitrides, and nitrides (collectively known as MXenes) has quickly attracted the attention of those developing energy storage applications such as electrodes for supercapacitors with acidic aqueous electrolytes. The excellent performance of these MXenes is attributed to a pseudocapacitive energy storage mechanism, based on the non‐rectangular shape of cyclic voltammetry curves and changes in the titanium oxidation state detected by in situ X‐ray absorption spectroscopy. However, the pseudocapacitive mechanism is not well understood and no dimensional changes due to proton insertion have been reported. In this work, in situ X‐ray diffraction and density functional theory are used to investigate the charge storage mechanism of Ti₃C₂T_x in 1 m H₂SO₄. Results reveal that a 0.5 Å expansion and shrinkage of the c‐lattice parameter of Ti₃C₂T_x occur during cycling in a 0.9 V voltage window, showing that the charge storage mechanism is intercalation pseudocapacitance with implication for MXene use in energy storage and electrochemical actuators.     

Janus‐Structured Co‐Ti3C2 MXene Quantum Dots as a Schottky Catalyst for High‐Performance Photoelectrochemical Water Oxidation

MXene materials have attracted increasing attention in electrochemical energy‐storage applications while MXene also becomes photo‐active at the quantum dot scale, making it an alternative for solar‐energy‐conversion devices. A Janus‐structured cobalt‐nanoparticle‐coupled Ti₃C₂ MXene quantum dot (Co‐MQD) Schottky catalyst with tunable cobalt‐loading content serving as a photoelectrochemical water oxidation photoanode is demonstrated. The introduction of cobalt triggers concomitant surface‐plasmon effects and acts as a water oxidation center, enabling visible‐light harvesting capability and improving surface reaction kinetics. Most importantly, due to the rectifying effects of Co‐MQD Schottky junctions, photogenerated carrier separation/injection efficiency can be fundamentally facilitated. Specifically, Co‐MQD‐48 exhibits both superior photoelectrocatalysis (2.99 mA cm^?2 at 1.23 V vs RHE) and charge migration performance (87.56%), which corresponds to 194% and 236% improvement compared with MQD. Furthermore, excellent photostability can be achieved with less than 6.6% loss for 10 h cycling reaction. This fills in gaps in MXene material research in photoelectrocatalysis and allows for the extension of MXene into optical‐related fields.     

Knittable and Washable Multifunctional MXene‐Coated Cellulose Yarns

Textile‐based electronics enable the next generation of wearable devices, which have the potential to transform the architecture of consumer electronics. Highly conductive yarns that can be manufactured using industrial‐scale processing and be washed like everyday yarns are needed to fulfill the promise and rapid growth of the smart textile industry. By coating cellulose yarns with Ti₃C₂T_x MXene, highly conductive and electroactive yarns are produced, which can be knitted into textiles using an industrial knitting machine. It is shown that yarns with MXene loading of ≈77 wt% (≈2.2 mg cm^?1) have conductivity of up to 440 S cm^?1. After washing for 45 cycles at temperatures ranging from 30 to 80 °C, MXene‐coated cotton yarns exhibit a minimal increase in resistance while maintaining constant MXene loading. The MXene‐coated cotton yarn electrode offers a specific capacitance of 759.5 mF cm^?1 at 2 mV s^?1. A fully knitted textile‐based capacitive pressure sensor is also prepared, which offers high sensitivity (gauge factor of ≈6.02), wide sensing range of up to ≈20% compression, and excellent cycling stability (2000 cycles at ≈14% compression strain). This work provides new and practical insights toward the development of platform technology that can integrate MXene in cellulose‐based yarns for textile‐based devices.     

Graphene Oxide‐Template Controlled Cuboid‐Shaped High‐Capacity VS4 Nanoparticles as Anode for Sodium‐Ion Batteries

Room‐temperature sodium‐ion batteries have attracted great attentions for large‐scale energy storage applications in renewable energy. However, exploring suitable anode materials with high reversible capacity and cyclic stability is still a challenge. The VS₄, with parallel quasi‐1D chains structure of V⁴⁺(S₂^2?)₂, which provides large interchain distance of 5.83 Å and high capacity, has showed great potential for sodium storage. Here, the uniform cuboid‐shaped VS₄ nanoparticles are prepared as anode for sodium‐ion batteries by the controllable of graphene oxide (GO)‐template contents. It exhibits superb electrochemical performances of high‐specific charge capacity (≈580 mAh·g^?1 at 0.1 A·g^?1), long‐cycle‐life (≈98% retain at 0.5 A·g?¹ after 300 cycles), and high rates (up to 20 A·g^?1). In addition, electrolytes are optimized to understand the sodium storage mechanism. It is thus demonstrated that the findings have great potentials for the applications in high‐performance sodium‐ion batteries.     

Rationally Engineered Electrodes for a High‐Performance Solid‐State Cable‐Type Supercapacitor

Wire‐shaped electrodes for solid‐state cable‐type supercapacitors (SSCTS) with high device capacitance and ultrahigh rate capability are prepared by depositing poly(3,4‐ethylenedioxythiophene) onto self‐doped TiO₂ nanotubes (D‐TiO₂) aligned on Ti wire via a well‐controlled electrochemical process. The large surface area, short ion diffusion path, and high electrical conductivity of these rationally engineered electrodes all contribute to the energy storage performance of SSCTS. The cyclic voltammetric studies show the good energy storage ability of the SSCTS even at an ultrahigh scan rate of 1000 V s^?1, which reveals the excellent instantaneous power characteristics of the device. The capacitance of 1.1 V SSCTS obtained from the charge–discharge measurements is 208.36 µF cm^?1 at a discharge current of 100 µA cm^?1 and 152.36 µF cm^?1 at a discharge current of 2000 µA cm^?1, respectively, indicating the ultrahigh rate capability. Furthermore, the SSCTS shows superior cyclic stability during long‐term (20 000 cycles) cycling, and also maintains excellent performance when it is subjected to bending and succeeding straightening process.     

Interfacial Approach toward Benzene‐Bridged Polypyrrole Film–Based Micro‐Supercapacitors with Ultrahigh Volumetric Power Density

2D soft nanomaterials are an emerging research field due to their versatile chemical structures, easily tunable properties, and broad application potential. In this study, a benzene‐bridged polypyrrole film with a large area, up to a few square centimeters, is synthesized through an interfacial polymerization approach. As‐prepared semiconductive films exhibit a bandgap of ≈2 eV and a carrier mobility of ≈1.5 cm² V^?1 s^?1, inferred from time‐resolved terahertz spectroscopy. The samples are employed to fabricate in‐plane micro‐supercapacitors (MSCs) by laser scribing and exhibit an ultrahigh areal capacitance of 0.95 mF cm^?2, using 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM][BF₄]) as an electrolyte. Importantly, the maximum energy and power densities of the developed MSCs reach values up to 50.7 mWh cm^?3 and 9.6 kW cm^?3, respectively; the performance surpassing most of the 2D material‐based MSCs is reported to date.     

Highly Stretchable,High‐Mobility,Free‐Standing All‐Organic Transistors Modulated by Solid‐State Elastomer Electrolytes

Highly stretchable, high‐mobility, and free‐standing coplanar‐type all‐organic transistors based on deformable solid‐state elastomer electrolytes are demonstrated using ionic thermoplastic polyurethane (i‐TPU), thereby showing high reliability under mechanical stimuli as well as low‐voltage operation. Unlike conventional ionic dielectrics, the i‐TPU electrolyte prepared herein has remarkable characteristics, i.e., a large specific capacitance of 5.5 µF cm^?2, despite the low weight ratio (20 wt%) of the ionic liquid, high transparency, and even stretchability. These i‐TPU‐based organic transistors exhibit a mobility as high as 7.9 cm² V^?1 s^?1, high bendability (R_c, radius of curvature: 7.2 mm), and good stretchability (60% tensile strain). Moreover, they are suitable for low‐voltage operation (V_DS = ?1.0 V, V_GS = ?2.5 V). In addition, the electrical characteristics such as mobility, on‐current, and threshold voltage are maintained even in the concave and convex bending state (bending tensile strain of ≈3.4%), respectively. Finally, free‐standing, fully stretchable, and semi‐transparent coplanar‐type all‐organic transistors can be fabricated by introducing a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonic acid layer as source/drain and gate electrodes, thus achieving low‐voltage operation (V_DS = ?1.5 V, V_GS = ?2.5 V) and an even higher mobility of up to 17.8 cm² V^?1 s^?1. Moreover, these devices withstand stretching up to 80% tensile strain.