Synthesis and properties of organic soluble semicrystalline poly(aryl ether ketone)s copolymers containing phthalazinone moieties

A series of poly(aryl ether ketone)s (PAEK) copolymers containing phthalazinone moieties were synthesized by modest polycondensation reaction from 4‐(4‐hydroxyl‐phenyl)‐(2H)‐phthalazin‐1‐one (DHPZ), hydroquinone (HQ), and 1,4‐bis(4‐fluorobenzoyl)benzene (BFBB). The T_g values of these copolymers ranged from 168 to 235°C, and the crystalline melting temperatures varied from 285 to 352°C. By introducing phthalazinone moieties into the main chain, the solubility of these copolymers was improved in some common polar organic solvents, such as chloroform (CHCl₃), N‐methyl‐2‐pyrrolidinone (NMP), nitrobenzene (NB) and so on. The values of 5% weight loss temperatures were all higher than 510°C in nitrogen. The crystal structures of these copolymers were determined by wide‐angle X‐ray diffraction (WAXD), which revealed that they were semicrystalline in nature, and the crystal structure of these copolymers was orthorhombic, equal to poly(ether ether ketone ketone)s. As phthalazinone content in the backbone varied from 0 to 40 mol % (mole percent), the cell parameters of these copolymers including the a, b, and c axes lengths ranged from 7.76 to 7.99 Å, 6.00 to 6.14 Å, and 10.10 to 10.19 Å, respectively. The degree of crystallinity (via differential scanning calorimetry) decreased from 37.70% to 16.14% simultaneously. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1744–1753, 2007     

Synthesis and properties of poly(aryl ether ketone)s containing both biphenylene moieties and sulfone linkages in the main chain

Two monomers, 4,4′‐bis(4‐phenoxybenzoyl)biphenyl (BPOBBP) and 4,4′‐diphenoxydiphenyl sulfone (DPODPS), were conveniently synthesized via simple synthetic procedures from readily available materials. A series of novel poly(aryl ether ketone)s containing both biphenylene moieties and sulfone linkages in the main chain were synthesized by the modified electrophilic Friedel‐Crafts acylation copolycondensation of isophthaloyl chloride (IPC) with a mixture of BPOBBP and DPODPS, over a wide range of BPOBBP/DPODPS molar ratios. The resulting polymers were characterized by Fourier transform infrared spectroscopy (FT‐IR), wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA), etc. The results indicated that the copolymers with 30 to 35 mol% DPODPS were semicrystalline and had remarkably increased glass transition temperatures (T_gs) over the conventional poly(ether ether ketone) (PEEK) and poly(ether ketone ketone) (PEKK) due to the incorporation of biphenylene units and sulfone linkages in the main chain. The copolymers with 30 to 35 mol% DPODPS had not only high T_gs of 176 to 177°C, but also moderate melting temperatures (T_ms) of 334 to 337°C, having good potential for the melt processing. The semicrystalline copolymers II to V had tensile strengths of 99.8 to 103.1 MPa, Young's moduli of 2.26 to 2.79 GPa, and elongations at break of 16.8 to 26.5% and exhibited outstanding thermal stability and good resistance to organic solvents. POLYM. ENG. SCI., 55:2140–2147, 2015. © 2015 Society of Plastics Engineers     

Synthesis and properties of novel copolymers of poly(ether ketone ether ketone ketone) and poly(ether ketone ketone ether ketone ketone) containing 1,4‐naphthylene moieties

A new monomer, 1,4‐bis(4‐phenoxybenzoyl)naphthalene (BPOBN), was conveniently synthesized via a simple synthetic procedure from readily available materials. A series of novel copolymers of poly(ether ketone ether ketone ketone) and poly(ether ketone ketone ether ketone ketone) containing 1,4‐naphthylene moieties were prepared by the Friedel‐Crafts acylation solution copolycondensation of terephthaloyl chloride (TPC) with a mixture of BPOBN and 4,4′‐diphenoxybenzophenone (DPOBPN), over a wide range of BPOBN/DPOBPN molar ratios, in the presence of anhydrous AlCl₃ and N‐methylpyrrolidone in 1,2‐dichloroethane. The copolymers with 10–40% BPOBN are semicrystalline and had remarkably increased T_gs over the conventional PEEK and PEKK due to the incorporation of 1,4‐naphthylene moieties in the main chains. The copolymers with 30–40 mol% BPOBN had not only high T_gs of 176–177°C, but also moderate T_ms of 332–338°C, which are suitable for the melt processing. These polymers had tensile strengths of 101.5–104.7 MPa, Young's moduli of 2.49–2.65 GPa, and elongations at break of 13.3–15.7% and exhibited high thermal stability and excellent resistance to organic solvents. POLYM. ENG. SCI., 56:566–572, 2016. © 2016 Society of Plastics Engineers     

Crystallization kinetics of novel poly(aryl ether ketone) copolymers containing 2,7‐naphthalene moieties

To increase the glass transition temperature (T_g) of poly(aryl ether ketone), and to decrease the melting temperature (T_m) and temperature of processing, a series of novel poly(aryl ether ketone)s with different contents of 2,7‐naphthalene moieties (PANEK) was synthesized. We focused on the influence of the naphthalene contents to the copolymer's crystallization. The crystallization kinetics of the copolymers was studied isothermally and nonisothermally by differential scanning calorimetry. In the study of isothermal crystallization kinetics, the Avrami equation was used to analyze the primary process of the crystallization. The study results of the crystallization of PANEK at cooling/heating rates ranging from 5 to 60°C/min under nonisothermal conditions are also reported. Both the Avrami equation and the modified Avrami–Ozawa equation were used to describe the nonisothermal crystallization kinetics of PANEK. The results show that the increase in the crystallization temperature and the content of 2,7‐naphthalene moieties will make the crystallization rate decrease, while the nucleation mechanism and the crystal growth of PANEK are not influenced by the increasing of the content of 2,7‐naphthalene moieties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2527–2536, 2006     

四氟乙烯-全氟丙基乙烯基醚共聚物结构和性能

采用广角X射线衍射和差示扫描量热法研究了不同组成的四氟乙烯-全氟丙基乙烯基醚（TFE-PPVE)共聚物的结晶结构、结晶度和结晶熔融温度,结果发现,当共聚物中γ(PPVE)由0．48％增大到4．02％时,晶粒尺寸从87．2nm减小到22．0nm,同时结晶度和结晶熔融温度明显降低,熔体流动速率增大,尤其当γ(PPVE)大于2．5％时,增大显著。     

Synthesis and properties of poly(aryl ether ketone ketone)/poly(aryl ether ether ketone ketone) copolymers with pendant cyano groups

2,6‐Diphenoxybenzonitrile (DPOBN) was synthesized by reaction of phenol with 2,6‐difluorobenzonitrile in N‐methyl‐2‐pyrrolidone in the presence of KOH and K₂CO₃. Poly(aryl ether ketone ketone)/poly(aryl ether ether ketone ketone) copolymers with pendant cyano groups were prepared by the Friedel–Crafts electrophilic substitution reaction of terephthaloyl chloride with varying mole proportions of diphenyl ether and DPOBN using 1,2‐dichloroethane as solvent and N‐methyl‐2‐pyrrolidone as Lewis base in the presence of anhydrous AlCl₃. The resulting polymers were characterized by various analytical techniques, such as FT‐IR, differential scanning calorimeter, thermal gravimetric analysis, and wide‐angle X‐ray diffraction. The crystallinity and melting temperature of the polymers were found to decrease with increase in concentration of the DPOBN units in the polymer. Thermogravimetric studies showed that all the polymers were stable up to 514°C in N₂ atmosphere. The glass transition temperature was found to increase with increase in concentration of the DPOBN units in the polymer when the molar ratios of DPOBN to DPE ranged from 10/90 to 30/70. The copolymers containing 30–40 mol % of the DPOBN units exhibit excellent thermostability at (350 ± 10)°C and have good resistance to acidity, alkali, and organic solvents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3601–3606, 2007     

Copolymerization and blending of poly(phthalazinone ether ketone)s to improve their melt processability

The melt processability of phthalazinone‐containing poly(aryl ether)s (PAEs) was improved through copolymerization and blending. Poly(phthalazinone ether ketone) (PPEK) copolymers containing phthalazinone and bisphenol‐A (BPA) moieties were synthesized through nucleophilic substitution polycondensation. The PPEK copolymers exhibited high glass transition temperatures, excellent thermooxidative properties, good mechanical properties and improved solubility, all of which can be tailored by changing the molar ratio of phthalazinone to bisphenol monomers. The rheological investigation indicated that the incorporation of the flexible BPA moiety into the main chain lowered the melt viscosity of the copolymers. To improve the melt processability further, polymer blends of a PPEK copolymer/polycarbonate (PC) were prepared. The results suggested that blending is an effective approach for improving the melt processability of phthalazinone‐containing PAEs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2575–2580, 2007     

Synthesis and characterization of poly(ether ketone ether ketone ketone)/poly(ether ether ketone ketone) copolymers containing naphthalene and pendant cyano groups

2,6‐Bis(β‐naphthoxy)benzonitrile (BNOBN) was synthesized by reaction of β‐naphthol with 2,6‐difluorobenzonitrile in N‐methyl‐2‐pyrrolidone (NMP) in the presence of KOH and K₂CO₃. Poly(ether ketone ether ketone ketone)(PEKEKK) /poly(ether ether ketone ketone) (PEEKK) copolymers containing naphthalene and pendant cyano groups were obtained by electrophilic Friedel‐Crafts polycondensation of terephthaloyl chloride (TPC) with varying mole proportions of 4,4′‐diphenoxybenzophenone (DPOBP) and 2,6‐bis(β‐naphthoxy)benzonitrile (BNOBN) using 1,2‐dichloroethane (DCE) as solvent and NMP as Lewis base in the presence of anhydrous AlCl₃. The resulting polymers were characterized by various analytical techniques, such as FTIR, DSC, TG, and WAXD. The results indicated that the crystallinity and melting temperature of the polymers decreased with increase in concentration of the BNOBN units in the polymer, the glass transition temperature of the polymers increased with increase in concentration of the BNOBN units in the polymer. Thermogravimetric studies showed that all the polymers were stable up to 536°C in N₂ atmosphere. The copolymers have good resistance to acidity, alkali, and organic solvents. Because of the melting temperature (T_m) depression with increase in the BNOBN content in the reaction system, the processability of the resultant coplymers could be effectively improved. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Compatibility,rheological, and thermal properties of the melt blends of PEN (HQ/PP) with PEN (HQ/RS)

Two kinds of polyarylene ether nitriles (PEN) copolymers PEN (HQ/PP) and PEN (HQ/RS) were synthesized using 2,6-dicholorobenzonitrile (DCBN) with equal molar of phenolphthalein (PP) and hydroquinone (HQ), DCBN with equal molar of HQ and resorcin (RS), respectively. The melt-mixed blends of two PENs over the complete composition range were characterized by dynamic mechanical analyses (DMA), tensile testing, scanning electronic microscopy (SEM), and capillary rheometer test for their compatibility, thermal, mechanical, and melt flow properties study. DMA show a considerable compatibility between the two PENs. Morphology examinations reveal good component dispersion and strong interface adhesion. The capillary rheometer test found that the blending of PEN (HQ/RS) enhanced the fluidity of the PEN (HQ/PP)/PEN (HQ/RS) blends by reducing its viscosity, which is beneficial to the processability of PEN (HQ/PP). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of novel poly(ether ketone diphenyl ketone ether ketone ketone)s by electrophilic Friedel–Crafts solution polycondensation

4,4′‐Bis(4‐phenoxybenzoyl)diphenyl was prepared by the Friedel–Crafts reaction of 4‐bromobenzoyl chloride and diphenyl followed by condensation with potassium phenoxide. Novel aromatic poly(ether ketone diphenyl ketone ether ketone ketone)s were obtained by the electrophilic Friedel–Crafts solution copolycondensation of 4,4′‐bis(4‐phenoxybenzoyl)diphenyl with a mixture of isophthaloyl chloride and terephthaloyl chloride over a wide range of isophthaloyl chloride/terephthaloyl chloride molar ratios in the presence of anhydrous aluminum chloride and N‐methylpyrrolidone in 1,2‐dichloroethane. The influence of the reaction conditions on the preparation of the copolymers was examined. The copolymers were characterized with different physicochemical techniques. Because of the incorporation of diphenyl, the resulting copolymers exhibited outstanding thermal stability. The glass‐transition temperatures were above 174°C, the melting temperatures were above 342°C, and the 5% weight loss temperatures were above 544°C in nitrogen. All these copolymers were semicrystalline and insoluble in organic solvents. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of copolymers of poly(ether ketone ketone) and poly(ether amide ether amide ether ketone ketone)

Poly(aryl ether ketone)s (PAEKs) are a class of high‐performance engineering thermoplastics known for their excellent combination of chemical, physical and mechanical properties, and the synthesis of semicrystalline PAEKs with increased glass transition temperatures (T_g) is of much interest. In the work reported, a series of novel copolymers of poly(ether ketone ketone) (PEKK) and poly(ether amide ether amide ether ketone ketone) were synthesized by electrophilic solution polycondensation of terephthaloyl chloride with a mixture of diphenyl ether and N,N′‐bis(4‐phenoxybenzoyl)‐4,4′‐diaminodiphenyl ether (BPBDAE) under mild conditions. The copolymers obtained were characterized using various physicochemical techniques. The copolymers with 10–35 mol% BPBDAE are semicrystalline and have markedly increased T_g over commercially available poly(ether ether ketone) and PEKK due to the incorporation of amide linkages in the main chain. The copolymers with 30–35 mol% BPBDAE not only have high T_g of 178–186 °C, but also moderate melting temperatures of 335–339 °C, having good potential for melt processing. The copolymers with 30–35 mol% BPBDAE have tensile strengths of 102.4–103.8 MPa, Young's moduli of 2.33–2.45 GPa and elongations at break of 11.7–13.2%, and exhibit high thermal stability and good resistance to organic solvents. Copyright © 2010 Society of Chemical Industry     

Synthesis and properties of novel copolymers of poly(ether ketone diphenyl ketone ether ketone ketone) and poly(ether amide ether amide ether ketone ketone)

New monomers, 4,4′‐bis(4‐phenoxybenzoyl)diphenyl (BPOBDP) and N,N′‐bis(4‐phenoxybenzoyl)?4,4′‐diaminodiphenyl ether (BPBDAE), were conveniently synthesized via simple synthetic procedures from readily available materials. Novel copolymers of poly(ether ketone diphenyl ketone ether ketone ketone) (PEKDKEKK) and poly(ether amide ether amide ether ketone ketone) (PEAEAEKK) were synthesized by electrophilic Friedel‐Crafts solution copolycondensation of isophthaloyl chloride (IPC) with a mixture of BPOBDP and BPBDAE, over a wide range of BPOBDP/BPBDAE molar ratios, in the presence of anhydrous AlCl₃ and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The copolymers obtained were characterized by different physico‐chemical techniques. The copolymers with 10–40 mol% BPBDAE are semicrystalline and had remarkably increased T_gs over commercially available PEEK and PEKK due to the incorporation of amide and diphenyl linkages in the main chains. The copolymers IV and V with 30–40 mol% BPBDAE had not only high T_gs of 185–188°C, but also moderate T_ms of 326–330°C, having good potential for the melt processing. The copolymers IV and V had tensile strengths of 101.7–102.3 MPa, Young's moduli of 2.19–2.42 GPa, and elongations at break of 13.2–16.6% and exhibited high thermal stability and excellent resistance to organic solvents. POLYM. ENG. SCI., 54:1757–1764, 2014. © 2013 Society of Plastics Engineers     

Crystallinity of poly(arylene ether nitrile) copolymers containing hydroquinone and bisphenol A segments

The hydroquinone (HQ) and bisphenol A (BPA) type poly(arylene ether nitrile) (PEN) (HQ/BPA‐PEN) were synthesized through nucleophilic aromatic substitution polymerization from HQ, BPA, and 2,6‐dichlorobenzonitrile (DCBN). The prepared copolymers were characterized by intrinsic viscosity, Fourier transform infrared (FTIR), and dynamic rheological analysis. The properties of resultant copolymers were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and mechanical testing. The results showed that the PEN copolymers exhibited crystallization performance with excellent thermal and mechanical properties. HQ/BPA‐PEN10 was made into films by solution‐casting process and then were treated at different temperatures (200, 260, 280, 300, 310, and 320 °C) for different times (1, 2, 3, 4, and 5 h) to investigate the crystallinity. Results showed that when isothermal treatment temperature is 310 °C and isothermal treating time is 4 h, HQ/BPA‐PEN10 showed best properties. At this condition, the melting enthalpy, crystallinity, tensile strength, and elongation at break of the sample is 17.7 J/g, 14.11%, 132.9 MPa, and 6.1%, respectively. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46412.     

Semi-aromatic copoly(ether ether amide): Synthesis and properties

A series of semi-aromatic copoly(ether ether amide)s (hydroquinone (HQ) (0%)-HQ (100%)) were synthesized by 1,1-bis(4-hydroxyphenyl)-1-phenylethane (BHPPE), 1,4-benzenediol (HQ) and 1,6-N,N′-bis(4-fuorobenzamide) hexane (BFBH) in this work. The inherent viscosities of copoly(ether ether amide)s were in the range of 0.487–0.769 dl g⁻¹. Following with increase of the content of HQ, the resultant polymers were converted from amorphous to crystalline. The copolymers were found to have high glass transition temperatures (T_g) of 141.4–155.6°C and weight-loss temperature (T_5%) of 423.3–434.3°C. They can be hot-pressed into films with tensile strength of 63.3–87.6 MPa, and storage modulus over 0.8 GPa at about 150°C, indicating good thermal and mechanical property of the obtained copolymers. The results of rheological property showed that the copolymers had good melt flowability and thermal stability. Additionally, the introduction of HQ improved the corrosion resistance of copolymers, the obtained polymers HQ (60%), HQ (80%) and HQ (100%) exhibited better corrosion resistance than that of HQ (0%). Especially, HQ (80%) and HQ (100%) were insoluble in organic polar solvents such as DMSO, DMF because of their crystalline nature, indicating that they had potential to be applied to the corrosion-resistant materials.     

复合成盐剂对聚醚醚酮合成与性能的影响

采用4,4′-二氟二苯甲酮、对苯二酚为原料,以不同比例的碳酸钾和碳酸钠为复合成盐剂,二甲苯为脱水剂,二苯砜为溶剂成功制备了一系列聚醚醚酮(PEEK)树脂。通过傅里叶红外光谱和X射线衍射对PEEK树脂结构进行了表征,证明合成的样品是对苯二酚型PEEK树脂。其次,对所制样品分别进行力学性能、特性黏度、热性能测试,详细地探讨不同钾/钠比例的复合成盐剂对PEEK性能的影响。结果表明,所有样品均展示了优异的力学性能和热性能,其熔点和初始分解温度分别大于330℃和520℃,拉伸强度介于77~101 MPa。此外,当碳酸钾和碳酸钠的物质的量比为7∶3时,PEEK树脂的综合性能达到最优。     

Synthesis and thermotropic liquid‐crystalline behaviour of novel main‐chain poly(ether ether ketone ketone)s containing a lateral tert‐butyl group

The synthesis of novel poly(ether ether ketone ketone)s containing a lateral group via the random copolymerization of 4,4′‐biphenol, tert‐butylhydroquinone and 1,4‐bis(p‐fluorobenzoyl)benzene is described. The copolymers were characterized by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and polarized optical microscopy (POM) observation. The results showed that the thermotropic liquid‐crystalline properties were achieved in the copolymers containing 30 mol% and 50 mol% tert‐butylhydroquinone, which have relatively lower melting temperatures due to the copolymerization effect. Both the crystalline–liquid‐crystalline transition (T_m) and the liquid‐crystalline–isotropic phase transition (T_i) were observable in the DSC thermograms, while the biphenol‐based poly(aryl ether ketone) has only one melting transition. The hydroquinone‐based polymer was shown to be amorphous. Thermogravimetric analysis (TGA) results showed that these copolymers are all high‐temperature resistant with higher glass transition temperature between 147 and 149 °C, and higher decomposition temperature T_d in the range 480–520 °C. © 2000 Society of Chemical Industry     

Synthesis and characterization of poly(arylene ether ketone) (co)polymers containing sulfonate groups

Poly(arylene ether ketone)s containing sulfonate groups were synthesized by aromatic nucleophilic polycondensation of 4,4′-difluorobenzophenone (DFK), sodium 2,5-dihydroxybenzensulfonate (SHQ) and bisphenols. Only low-molecular weight oligomer was obtained when hydroquinone (HQ) was employed as comonomer, while copolymerization of DFK, SHQ, and phenolphthalein (PL) proceeded quantitatively to high-molecular weight (reduced viscosities above 0.68 dL/g) in dimethylsulfoxide at 175 °C in presence of anhydrous potassium carbonate. The sulfonated polymers were soluble in dipolar aprotic solvents, such as N,N-dimethylactamide and N-methyl-2-pyrrolidinone. Tough membranes cast from N,N-dimethylformamide solution with SHQ/DFK mole ratios ≤65:35 were obtained. Both glass transition temperatures and hydrophilicity of the copolymers increased with the content of sodium sulfonate groups. The materials are candidates as new polymeric electrolytes for proton exchange membranes.     

Synthesis and characterization of thermotropic liquid crystalline poly(aryl ether ketone) copolymers with pendant 3‐(trifluoromethyl) phenyl groups

Novel poly(aryl ether ketone) copolymers with pendant 3‐(trifluoromethyl)phenyl groups were synthesized by the reaction of a crystal‐disrupting monomer, 3‐(trifluoromethyl)phenylhydroquinone (FH) and a mesogenic monomer, 4,4′‐biphenol (BP) with 1,4‐bis(p‐fluorobenzoyl)benzene (BF). Thermotropic liquid crystalline behavior of the copolymers was investigated by means of differential scanning calorimetry, polarized optical microscope and wide‐angle X‐ray diffraction. As a result, the copolymers with the respective molar ratios of FH/BP/BF of 0/100/100–10/90/100 and 80/20/100–100/0/100 were semi‐crystalline without liquid crystalline properties, and amorphous polymers, respectively. In contrast, copolymers with the molar ratio of FH/BP/BF of 20/80/100–70/30/100 had liquid crystalline characteristics. Interestingly, the formation of a highly ordered smectic phase was confirmed for copolymers with the molar ratio of FH/BP/BF of 20/80/100–50/50/100, respectively. All the liquid crystalline copolymers had a wide liquid crystalline temperature range (57–75 °C). Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of novel poly(aryl ether ketone)s with metallophthalocyanine pendant unit from a new bisphenol containing dicyanophenyl side group

A new bisphenol, (3,4-dicyano)phenylhydroquinone was prepared via a three-step reaction. Then a series of novel poly(aryl ether ketone) copolymers containing dicyanophenyl groups were prepared by the reactions of 4,4′-difluorobenzophenone with (3,4-dicyano)phenylhydroquinone and 4,4′-isopropylidenediphenol. After that, a series of poly(aryl ether ketone)s with metallophthalocyanine pendants were synthesized via the reactions of poly(aryl ether ketone)s containing dicyanophenyl with excessive amounts of 1,2-dicyanobenzene and the corresponding metal salt in quinoline. These resulting copolymers were found to have high glass transition temperatures and high thermal stability. They have good solubility and are capable of forming tough films. These copolymers show strong optical absorption in the visible region and exhibit strong blue photoluminescence.     

Influence of chemical compositions on the properties of random and multiblock sulfonated poly(arylene ether sulfone)‐based proton‐exchange membranes

The influence of chemical compositions on the properties of sulfonated poly(arylene ether sulfone)‐based proton‐exchange membranes was studied. First, we synthesized three different series of random SPAES copolymers using three kinds of hydrophobic monomers, including 4,4′‐dihydroxyldiphenylether, 2,6‐dihydroxynaphthalene (DHN), and 4,4′‐hexafluoroisopropylidenediphenol (6F‐BPA) to investigate effects of hydrophobic components on the properties of SPAES membranes as proton‐exchange membranes. Random SPAES copolymers with 6F‐BPA showed the highest proton conductivity while random SPAES copolymers with DHN displayed the lowest methanol permeability among the three random copolymers. Subsequently, we synthesized multiblock SPAES using the DHN as a hydrophobic monomer and studied the effect of the length of hydrophilic segments in the multiblock SPAES copolymers on membrane performance. The results indicated that longer hydrophilic segments in the copolymers led to higher water uptake, proton conductivity, and proton/methanol selectivity of membranes even at low humidity. In addition, the morphology studies (AFM and SAXS measurements) of membranes suggested that multiblock copolymers with long hydrophilic segments resulted in developed phase separation in membranes, and ionic clusters formed more easily, thus improving the membrane performance. Therefore, both the kinds of hydrophobic monomers and the length of hydrophilic segments in SPAES copolymers would influence the membranes performance as proton‐exchange membranes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010