共查询到18条相似文献,搜索用时 468 毫秒
1.
锂离子蓄电池硅基负极材料的研究 总被引:1,自引:1,他引:0
综述了锂离子蓄电池硅基负极材料的制备、特性以及电化学性能的研究概况。分析了常温下锂与晶体硅以及无定形材料的电化学合金化机理,介绍了硅材料在充放电过程中的失效机制。重点探讨了单质硅、硅-金属复合材料、硅-碳材料作为锂离子蓄电池阳极材料的发展过程、反应机理以及充放电特性,并对其存在的问题进行了分析。对未来硅基材料的研究和应用作了探讨及预测,认为无定形合金薄膜材料以及纳米复合材料将是硅基材料的研究重点,硅基材料作为锂离子蓄电池商业化负极材料指日可待。 相似文献
2.
3.
4.
5.
硅基材料是新一代高容量锂离子电池负极材料的典型代表,近年来已成为理论和应用研究的热点。纳米硅基负极材料因具有独特的表面效应和尺寸效应等优点,可大大改善硅作为负极时所存在的循环性能,有望解决限制硅负极成为替代商业化石墨负极的瓶颈问题。介绍了近年来纳米级硅负极作为锂离子电池负极材料的最新研究进展,包括纳米硅颗粒、硅纳米线、硅纳米管及纳米硅薄膜,分析了纳米硅作为锂离子电池负极材料存在的问题,总结了纳米级硅作为锂离子电池负极较为可行的研究方法,展望了纳米硅作为高能量密度锂离子电池负极材料的研究前景。 相似文献
6.
7.
硅材料因其具有较高的理论容量、脱/嵌锂电位较低等优势受到人们的广泛关注。但是硅材料在嵌/脱锂过程中剧烈的体积效应限制了其实际应用。剧烈的体积变化将导致电极材料快速机械粉化,并从集流体上逐渐脱离,造成容量的快速下降。同时,还会导致材料表面的固体电解质界面膜(solid electrolyte interface,SEI)不断破坏-重构,造成持续的锂离子损耗。因此这些缺点是硅材料运用于电池负极材料亟需解决的问题。针对上述问题一个很好的解决办法是同具有弹性的导电材料进行复合,由此硅与碳材料的复合成为锂离子电池阳极的理想选择。本文列举了一些改进硅基负极材料的方法,并对一些硅/碳复合负极材料进行了综述,以及提出未来硅碳负极材料发展趋势。 相似文献
8.
9.
10.
11.
12.
13.
硅基负极材料的理论比容量远高于目前其他所有的负极材料,但由于自身体积效应导致锂离子电池循环性能降低,从而限制了其实际应用。除了从改性负极材料入手外,粘结剂的选取和改性成了改善硅基负极锂离子电池电化学性能的有效途径之一。水基羧甲基纤维素钠(CMC)是目前在硅基负极锂离子电池中研究较多的一种粘结剂。对羧甲基纤维素钠(CMC)在硅基锂离子电池中的作用机理及主要工作进行了综述。 相似文献
14.
15.
Silicon has received high interest as an anode material for lithium ion batteries due to its large theoretical Li storage capacity. However, poor cyclability and low coulombic efficiency of the Si based electrode, caused by the pulverization of the active material and the continuous formation of unstable solid electrolyte interphase (SEI) due to large volume change associated with Li, limits its practical use as an anode material. We have developed a Si nanotube array sheathed with silicon nitride compound to improve the mechanical integrity, resulting in improved electrochemical performance. The SiN/SiOxNy outer shell has excellent mechanical properties, such as a high elastic modulus and hardness. This guides the volume expansion of the Si into the hollow inner space of the tubular structure during charge, which prevents both the pulverization of the Si active material, as well as continuous SEI layer formation by protecting the exposure of fresh Si surface to the electrolyte. Si nanotube array sheathed with silicon nitride electrode compound exhibits improved electrochemical performance, including stable capacity retention and high coulombic efficiencies, over the analogous homogeneous Si nanotube system. 相似文献
16.
锂离子电池负极材料——树脂包覆石墨的性能 总被引:13,自引:2,他引:11
石墨作为锂离子电池的负极材料具有高的脱嵌锂容量及平坦且低的(相对于锂金属)电压特性,但也存在一些问题,如在高倍率充放电性能及与电解质的相容性方面。本工作制备并研究了环氧树脂包覆石墨制备的复合碳材料。当用这种复合碳材料作为锂离子电池的负极时,它的无序结构的焦炭壳层防止了石墨核心材料在插锂过程中的剥落现象,改进了锂离子在阳极材料中的扩散性能。这种材料与石墨相比,不仅保留了石墨具有较高的插锂容量的特性,并且大大改进了其与电解质溶液的相容性和动力学性能,当这种复合碳材料用1C充放电时,仍保持有200mAh/g的容量。 相似文献
17.
Four kinds of silicon-metals (Cu, Ni, Sn)-graphite composites for anode active materials of lithium secondary batteries were
prepared by sequential employment of PECVD (Plasma enhance chemical vapor deposition) and RF(Radio-frequency)-magnetron sputtering
method. The silicon-copper-graphite composite showed the highest reversible capacity and cyclability among the silicon-metal
composite graphite samples prepared. The enhanced electrochemical performance of silicon-copper-graphite composite is attributed
to the formation of copper silicide on the surface of graphite.
The copper silicide plays an important role as a buffering layer against volume change of silicon during the intercalation/deintercalation
due to the chemical bonding of silicon and copper, and has lower interfacial impedance than that of other silicon-metal-graphite
composites which may lead to low irreversible capacity. 相似文献
18.
通过高温热解法合成不同纳米硅含量的Si/C复合微球材料并对其形貌及电化学性能进行了探究。采用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、恒电流充放电和循环伏安测试等技术对样品进行表征分析。电化学测试结果表明:当样品中的硅含量为8%(质量分数)时,制备的纳米Si/C复合微球负极材料在100 m A/g的电流密度下,首次可逆充电比容量为532.0 mAh/g,循环100次后,比容量可稳定在321.8 mAh/g。该结果归因于无定形碳良好的导电性及较高的比表面积。 相似文献