Construction of Bimetallic Selenides Encapsulated in Nitrogen/Sulfur Co‐Doped Hollow Carbon Nanospheres for High‐Performance Sodium/Potassium‐Ion Half/Full Batteries

Metallic selenides have been widely investigated as promising electrode materials for metal‐ion batteries based on their relatively high theoretical capacity. However, rapid capacity decay and structural collapse resulting from the larger‐sized Na⁺/K⁺ greatly hamper their application. Herein, a bimetallic selenide (MoSe₂/CoSe₂) encapsulated in nitrogen, sulfur‐codoped hollow carbon nanospheres interconnected reduced graphene oxide nanosheets (rGO@MCSe) are successfully designed as advanced anode materials for Na/K‐ion batteries. As expected, the significant pseudocapacitive charge storage behavior substantially contributes to superior rate capability. Specifically, it achieves a high reversible specific capacity of 311 mAh g^?1 at 10 A g^?1 in NIBs and 310 mAh g^?1 at 5 A g^?1 in KIBs. A combination of ex situ X‐ray diffraction, Raman spectroscopy, and transmission electron microscopy tests reveals the phase transition of rGO@MCSe in NIBs/KIBs. Unexpectedly, they show quite different Na⁺/K⁺ insertion/extraction reaction mechanisms for both cells, maybe due to more sluggish K⁺ diffusion kinetics than that of Na⁺. More significantly, it shows excellent energy storage properties in Na/K‐ion full cells when coupled with Na₃V₂(PO₄)₂O₂F and PTCDA@450 °C cathodes. This work offers an advanced electrode construction guidance for the development of high‐performance energy storage devices.     

Caging Nb2O5 Nanowires in PECVD‐Derived Graphene Capsules toward Bendable Sodium‐Ion Hybrid Supercapacitors

Sodium‐ion hybrid supercapacitors (Na‐HSCs) by virtue of synergizing the merits of batteries and supercapacitors have attracted considerable attention for high‐energy and high‐power energy‐storage applications. Orthorhombic Nb₂O₅ (T‐Nb₂O₅) has recently been recognized as a promising anode material for Na‐HSCs due to its typical pseudocapacitive feature, but it suffers from intrinsically low electrical conductivity. Reasonably high electrochemical performance of T‐Nb₂O₅‐based electrodes could merely be gained to date when sufficient carbon content was introduced. In addition, flexible Na‐HSC devices have scarcely been demonstrated by far. Herein, an in situ encapsulation strategy is devised to directly grow ultrathin graphene shells over T‐Nb₂O₅ nanowires (denoted as Gr‐Nb₂O₅ composites) by plasma‐enhanced chemical vapor deposition, targeting a highly conductive anode material for Na‐HSCs. The few‐layered graphene capsules with ample topological defects would enable facile electron and Na⁺ ion transport, guaranteeing rapid pseudocapacitive processes at the Nb₂O₅/electrolyte interface. The Na‐HSC full‐cell comprising a Gr‐Nb₂O₅ anode and an activated carbon cathode delivers high energy/power densities (112.9 Wh kg^?1/80.1 W kg^?1 and 62.2 Wh kg^?1/5330 W kg^?1), outperforming those of recently reported Na‐HSC counterparts. Proof‐of‐concept Na‐HSC devices with favorable mechanical robustness manifest stable electrochemical performances under different bending conditions and after various bending–release cycles.     

Oxygen‐Vacancy and Surface Modulation of Ultrathin Nickel Cobaltite Nanosheets as a High‐Energy Cathode for Advanced Zn‐Ion Batteries

The development of high‐capacity, Earth‐abundant, and stable cathode materials for robust aqueous Zn‐ion batteries is an ongoing challenge. Herein, ultrathin nickel cobaltite (NiCo₂O₄) nanosheets with enriched oxygen vacancies and surface phosphate ions (P–NiCo₂O_4‐x) are reported as a new high‐energy‐density cathode material for rechargeable Zn‐ion batteries. The oxygen‐vacancy and surface phosphate‐ion modulation are achieved by annealing the pristine NiCo₂O₄ nanosheets using a simple phosphating process. Benefiting from the merits of substantially improved electrical conductivity and increased concentration of active sites, the optimized P–NiCo₂O_4‐x nanosheet electrode delivers remarkable capacity (309.2 mAh g^?1 at 6.0 A g^?1) and extraordinary rate performance (64% capacity retention at 60.4 A g^?1). Moreover, based on the P–NiCo₂O_4‐x cathode, our fabricated P–NiCo₂O_4‐x//Zn battery presents an impressive specific capacity of 361.3 mAh g^?1 at the high current density of 3.0 A g^?1 in an alkaline electrolyte. Furthermore, extremely high energy density (616.5 Wh kg^?1) and power density (30.2 kW kg^?1) are also achieved, which outperforms most of the previously reported aqueous Zn‐ion batteries. This ultrafast and high‐energy aqueous Zn‐ion battery is promising for widespread application to electric vehicles and intelligent devices.     

Few‐Layered Tin Sulfide Nanosheets Supported on Reduced Graphene Oxide as a High‐Performance Anode for Potassium‐Ion Batteries

Anodes involving conversion and alloying reaction mechanisms are attractive for potassium‐ion batteries (PIBs) due to their high theoretical capacities. However, serious volume change and metal aggregation upon potassiation/depotassiation usually cause poor electrochemical performance. Herein, few‐layered SnS₂ nanosheets supported on reduced graphene oxide (SnS₂@rGO) are fabricated and investigated as anode material for PIBs, showing high specific capacity (448 mAh g^?1 at 0.05 A g^?1), high rate capability (247 mAh g^?1 at 1 A g^?1), and improved cycle performance (73% capacity retention after 300 cycles). In this composite electrode, SnS₂ nanosheets undergo sequential conversion (SnS₂ to Sn) and alloying (Sn to K₄Sn₂₃, KSn) reactions during potassiation/depotassiation, giving rise to a high specific capacity. Meanwhile, the hybrid ultrathin nanosheets enable fast K storage kinetics and excellent structure integrity because of fast electron/ionic transportation, surface capacitive‐dominated charge storage mechanism, and effective accommodation for volume variation. This work demonstrates that K storage performance of alloy and conversion‐based anodes can be remarkably promoted by subtle structure engineering.     

Composition and Architecture Design of Double‐Shelled Co0.85Se1−xSx@Carbon/Graphene Hollow Polyhedron with Superior Alkali (Li,Na, K)‐Ion Storage

The exploration of materials with reversible and stable electrochemical performance is crucial in energy storage, which can (de) intercalate all the alkali‐metal ions (Li⁺, Na⁺, and K⁺). Although transition‐metal chalcogenides are investigated continually, the design and controllable preparation of hierarchical nanostructure and subtle composite withstable properties are still great challenges. Herein, component‐optimal Co_0.85Se_1?xS_x nanoparticles are fabricated by in situ sulfidization of metal organic framework, which are wrapped by the S‐doped graphene, constructing a hollow polyhedron framework with double carbon shells (CoSSe@C/G). Benefiting from the synergistic effect of composition regulation and architecture design by S‐substitution, the electrochemical kinetic is enhanced by the boosted electrochemistry‐active sites, and the volume variation is mitigated by the designed structure, resulting in the advanced alkali‐ion storage performance. Thus, it delivers an outstanding reversible capacity of 636.2 mAh g^?1 at 2 A g^?1 after 1400 cycles for Li‐ion batteries. Remarkably, satisfactory initial charge capacities of 548.1 and 532.9 mAh g^?1 at 0.1 A g^?1 can be obtained for Na‐ion and K‐ion batteries, respectively. The prominent performance combined with the theory calculation confirms that the synergistic strategy can improve the alkali‐ion transportation and structure stability, providing an instructive guide for designing high‐performance anode materials for universal alkali‐ion storage.     

Mesopore‐Induced Ultrafast Na+‐Storage in T‐Nb2O5/Carbon Nanofiber Films toward Flexible High‐Power Na‐Ion Capacitors

Hybrid Na‐ion capacitors (NICs) are receiving considerable interest because they combine the merits of both batteries and supercapacitors and because of the low‐cost of sodium resources. However, further large‐scale deployment of NICs is impeded by the sluggish diffusion of Na⁺ in the anode. To achieve rapid redox kinetics, herein the controlled fabrication of mesoporous orthorhombic‐Nb₂O₅ (T‐Nb₂O₅)/carbon nanofiber (CNF) networks is demonstrated via in situ SiO₂‐etching. The as‐obtained mesoporous T‐Nb₂O₅ (m‐Nb₂O₅)/CNF membranes are mechanically flexible without using any additives, binders, or current collectors. The in situ formed mesopores can efficiently increase Na⁺‐storage performances of the m‐Nb₂O₅/CNF electrode, such as excellent rate capability (up to 150 C) and outstanding cyclability (94% retention after 10 000 cycles at 100 C). A flexible NIC device based on the m‐Nb₂O₅/CNF anode and the graphene framework (GF)/mesoporous carbon nanofiber (mCNF) cathode, is further constructed, and delivers an ultrahigh power density of 60 kW kg^?1 at 55 Wh kg^?1 (based on the total weight of m‐Nb₂O₅/CNF and GF/mCNF). More importantly, owing to the free‐standing flexible electrode configuration, the m‐Nb₂O₅/CNF//GF/mCNF NIC exhibits high volumetric energy and power densities (11.2 mWh cm^?3, 5.4 W cm^?3) based on the full device, which holds great promise in a wide variety of flexible electronics.     

Electrostatically Assembling 2D Nanosheets of MXene and MOF‐Derivatives into 3D Hollow Frameworks for Enhanced Lithium Storage

As an essential member of 2D materials, MXene (e.g., Ti₃C₂T_x) is highly preferred for energy storage owing to a high surface‐to‐volume ratio, shortened ion diffusion pathway, superior electronic conductivity, and neglectable volume change, which are beneficial for electrochemical kinetics. However, the low theoretical capacitance and restacking issues of MXene severely limit its practical application in lithium‐ion batteries (LIBs). Herein, a facile and controllable method is developed to engineer 2D nanosheets of negatively charged MXene and positively charged layered double hydroxides derived from ZIF‐67 polyhedrons into 3D hollow frameworks via electrostatic self‐assembling. After thermal annealing, transition metal oxides (TMOs)@MXene (CoO/Co₂Mo₃O₈@MXene) hollow frameworks are obtained and used as anode materials for LIBs. CoO/Co₂Mo₃O₈ nanosheets prevent MXene from aggregation and contribute remarkable lithium storage capacity, while MXene nanosheets provide a 3D conductive network and mechanical robustness to facilitate rapid charge transfer at the interface, and accommodate the volume expansion of the internal CoO/Co₂Mo₃O₈. Such hollow frameworks present a high reversible capacity of 947.4 mAh g^?1 at 0.1 A g^?1, an impressive rate behavior with 435.8 mAh g^?1 retained at 5 A g^?1, and good stability over 1200 cycles (545 mAh g^?1 at 2 A g^?1).     

N‐Doped C@Zn3B2O6 as a Low Cost and Environmentally Friendly Anode Material for Na‐Ion Batteries: High Performance and New Reaction Mechanism

Na‐ion batteries (NIBs) are ideal candidates for solving the problem of large‐scale energy storage, due to the worldwide sodium resource, but the efforts in exploring and synthesizing low‐cost and eco‐friendly anode materials with convenient technologies and low‐cost raw materials are still insufficient. Herein, with the assistance of a simple calcination method and common raw materials, the environmentally friendly and nontoxic N‐doped C@Zn₃B₂O₆ composite is directly synthesized and proved to be a potential anode material for NIBs. The composite demonstrates a high reversible charge capacity of 446.2 mAh g^?1 and a safe and suitable average voltage of 0.69 V, together with application potential in full cells (discharge capacity of 98.4 mAh g^?1 and long cycle performance of 300 cycles at 1000 mA g^?1). In addition, the sodium‐ion storage mechanism of N‐doped C@Zn₃B₂O₆ is subsequently studied through air‐insulated ex situ characterizations of X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and Fourier‐transform infrared (FT‐IR) spectroscopy, and is found to be rather different from previous reports on borate anode materials for NIBs and lithium‐ion batteries. The reaction mechanism is deduced and proposed as: Zn₃B₂O₆ + 6Na⁺ + 6e^? ? 3Zn + B₂O₃ ? 3Na₂O, which indicates that the generated boracic phase is electrochemically active and participates in the later discharge/charge progress.     

T‐Nb2O5/C Nanofibers Prepared through Electrospinning with Prolonged Cycle Durability for High‐Rate Sodium–Ion Batteries Induced by Pseudocapacitance

Homogeneous ultrasmall T‐Nb₂O₅ nanocrystallites encapsulated in 1D carbon nanofibers (T‐Nb₂O₅/CNFs) are prepared through electrospinning followed by subsequent pyrolysis treatment. In a Na half‐cell configuration, the obtained T‐Nb₂O₅/CNFs with the merits of unique microstructures and inherent pseudocapacitance, deliver a stable capacity of 150 mAh g⁻¹ at 1 A g⁻¹ over 5000 cycles. Even at an ultrahigh charge–discharge rate of 8 A g⁻¹, a high reversible capacity of 97 mAh g⁻¹ is still achieved. By means of kinetic analysis, it is demonstrated that the larger ratio of surface Faradaic reactions of Nb₂O₅ at high rates is the major factor to achieve excellent rate performance. The prolonged cycle durability and excellent rate performance endows T‐Nb₂O₅/CNFs with potentials as anode materials for sodium‐ion batteries.     

High‐Energy/Power and Low‐Temperature Cathode for Sodium‐Ion Batteries: In Situ XRD Study and Superior Full‐Cell Performance

Sodium‐ion batteries (SIBs) are still confronted with several major challenges, including low energy and power densities, short‐term cycle life, and poor low‐temperature performance, which severely hinder their practical applications. Here, a high‐voltage cathode composed of Na₃V₂(PO₄)₂O₂F nano‐tetraprisms (NVPF‐NTP) is proposed to enhance the energy density of SIBs. The prepared NVPF‐NTP exhibits two high working plateaux at about 4.01 and 3.60 V versus the Na⁺/Na with a specific capacity of 127.8 mA h g^?1. The energy density of NVPF‐NTP reaches up to 486 W h kg^?1, which is higher than the majority of other cathode materials previously reported for SIBs. Moreover, due to the low strain (≈2.56% volumetric variation) and superior Na transport kinetics in Na intercalation/extraction processes, as demonstrated by in situ X‐ray diffraction, galvanostatic intermittent titration technique, and cyclic voltammetry at varied scan rates, the NVPF‐NTP shows long‐term cycle life, superior low‐temperature performance, and outstanding high‐rate capabilities. The comparison of Ragone plots further discloses that NVPF‐NTP presents the best power performance among the state‐of‐the‐art cathode materials for SIBs. More importantly, when coupled with an Sb‐based anode, the fabricated sodium‐ion full‐cells also exhibit excellent rate and cycling performances, thus providing a preview of their practical application.     

Sandwich‐like MoS2@SnO2@C with High Capacity and Stability for Sodium/Potassium Ion Batteries

Sandwich‐like MoS₂@SnO₂@C nanosheets are prepared by facile hydrothermal reactions. SnO₂ nanosheets can attach to exfoliated MoS₂ nanosheets to prevent restacking of adjacent MoS₂ nanosheets, and carbon transformed from polyvinylpyrrolidone is coated on MoS₂@SnO₂, forming a sandwich structure to maintain cycling stability. As an anode for sodium‐ion batteries, the electrode greatly deliverers a high initial discharge specific capacity of 530 mA h g^?1 and maintains at 396 mA h g^?1 after 150 cycles at 0.1 A g^?1. Even at a large current density of 1 A g^?1, it can hold 230 mA h g^?1 after 450 cycles. Besides, as an anode for K⁺ storage, the electrode also shows a discharge capacity of 312 mA h g^?1 after 25 cycles at 0.05 A g^?1. This work may provide a new strategy to prepare other composites which can be applied to new kind of rechargeable batteries.     

Porous Carbon Nanofibers Encapsulated with Peapod‐Like Hematite Nanoparticles for High‐Rate and Long‐Life Battery Anodes

Fe₂O₃ is regarded as a promising anode material for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs) due to its high specific capacity. The large volume change during discharge and charge processes, however, induces significant cracking of the Fe₂O₃ anodes, leading to rapid fading of the capacity. Herein, a novel peapod‐like nanostructured material, consisting of Fe₂O₃ nanoparticles homogeneously encapsulated in the hollow interior of N‐doped porous carbon nanofibers, as a high‐performance anode material is reported. The distinctive structure not only provides enough voids to accommodate the volume expansion of the pea‐like Fe₂O₃ nanoparticles but also offers a continuous conducting framework for electron transport and accessible nanoporous channels for fast diffusion and transport of Li/Na‐ions. As a consequence, this peapod‐like structure exhibits a stable discharge capacity of 1434 mAh g^?1 (at 100 mA g^?1) and 806 mAh g^?1 (at 200 mA g^?1) over 100 cycles as anode materials for LIBs and SIBs, respectively. More importantly, a stable capacity of 958 mAh g^?1 after 1000 cycles and 396 mAh g^?1 after 1500 cycles can be achieved for LIBs and SIBs, respectively, at a large current density of 2000 mA g^?1. This study provides a promising strategy for developing long‐cycle‐life LIBs and SIBs.     

Niobium‐Based Oxides Toward Advanced Electrochemical Energy Storage: Recent Advances and Challenges

Niobium‐based oxides including Nb₂O₅, TiNb_xO_2+2.5x compounds, M–Nb–O (M = Cr, Ga, Fe, Zr, Mg, etc.) family, etc., as the unique structural merit (e.g., quasi‐2D network for Li‐ion incorporation, open and stable Wadsley– Roth shear crystal structure), are of great interest for applications in energy storage systems such as Li/Na‐ion batteries and hybrid supercapacitors. Most of these Nb‐based oxides show high operating voltage (>1.0 V vs Li⁺/Li) that can suppress the formation of solid electrolyte interface film and lithium dendrites, ensuring the safety of working batteries. Outstanding rate capability is impressive, which can be derived from their fast intercalation pseudocapacitive kinetics. However, the intrinsic poor electrical conductivity hinders their energy storage applications. Various strategies including structure optimization, surface engineering, and carbon modification are effectively used to overcome the issues. This review provides a comprehensive summary on the latest progress of Nb‐based oxides for advanced electrochemical energy storage applications. Major impactful work is outlined, promising research directions, and various performance‐optimizing strategies, as well as the energy storage mechanisms investigated by combining theoretical calculations and various electrochemical characterization techniques. In addition, challenges and perspectives for future research and commercial applications are also presented.     

O3‐Type Layered Ni‐Rich Oxide: A High‐Capacity and Superior‐Rate Cathode for Sodium‐Ion Batteries

Inspired by its high‐active and open layered framework for fast Li⁺ extraction/insertion reactions, layered Ni‐rich oxide is proposed as an outstanding Na‐intercalated cathode for high‐performance sodium‐ion batteries. An O3‐type Na_0.75Ni_0.82Co_0.12Mn_0.06O₂ is achieved through a facile electrochemical ion‐exchange strategy in which Li⁺ ions are first extracted from the LiNi_0.82Co_0.12Mn_0.06O₂ cathode and Na⁺ ions are then inserted into a layered oxide framework. Furthermore, the reaction mechanism of layered Ni‐rich oxide during Na⁺ extraction/insertion is investigated in detail by combining ex situ X‐ray diffraction, X‐ray photoelectron spectroscopy, and electron energy loss spectroscopy. As an excellent cathode for Na‐ion batteries, O3‐type Na_0.75Ni_0.82Co_0.12Mn_0.06O₂ delivers a high reversible capacity of 171 mAh g^?1 and a remarkably stable discharge voltage of 2.8 V during long‐term cycling. In addition, the fast Na⁺ transport in the cathode enables high rate capability with 89 mAh g^?1 at 9 C. The as‐prepared Ni‐rich oxide cathode is expected to significantly break through the limited performance of current sodium‐ion batteries.     

Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) are attracting increasing attention and considered to be a low‐cost complement or an alternative to lithium‐ion batteries (LIBs), especially for large‐scale energy storage. Their application, however, is limited because of the lack of suitable host materials to reversibly intercalate Na⁺ ions. Layered transition metal oxides (Na_xMO₂, M = Fe, Mn, Ni, Co, Cr, Ti, V, and their combinations) appear to be promising cathode candidates for SIBs due to their simple structure, ease of synthesis, high operating potential, and feasibility for commercial production. In the present work, the structural evolution, electrochemical performance, and recent progress of Na_xMO₂ as cathode materials for SIBs are reviewed and summarized. Moreover, the existing drawbacks are discussed and several strategies are proposed to help alleviate these issues. In addition, the exploration of full cells based on Na_xMO₂ cathodes and future perspectives are discussed to provide guidance for the future commercialization of such systems.     

A Robust and Conductive Black Tin Oxide Nanostructure Makes Efficient Lithium‐Ion Batteries Possible

SnO₂‐based lithium‐ion batteries have low cost and high energy density, but their capacity fades rapidly during lithiation/delithiation due to phase aggregation and cracking. These problems can be mitigated by using highly conducting black SnO_2?x , which homogenizes the redox reactions and stabilizes fine, fracture‐resistant Sn precipitates in the Li₂O matrix. Such fine Sn precipitates and their ample contact with Li₂O proliferate the reversible Sn → Li _x Sn → Sn → SnO₂/SnO_2?x cycle during charging/discharging. SnO_2?x electrode has a reversible capacity of 1340 mAh g^?1 and retains 590 mAh g^?1 after 100 cycles. The addition of highly conductive, well‐dispersed reduced graphene oxide further stabilizes and improves its performance, allowing 950 mAh g^?1 remaining after 100 cycles at 0.2 A g^?1 with 700 mAh g^?1 at 2.0 A g^?1. Conductivity‐directed microstructure development may offer a new approach to form advanced electrodes.     

A Novel Potassium‐Ion‐Based Dual‐Ion Battery

In this work, combining both advantages of potassium‐ion batteries and dual‐ion batteries, a novel potassium‐ion‐based dual‐ion battery (named as K‐DIB) system is developed based on a potassium‐ion electrolyte, using metal foil (Sn, Pb, K, or Na) as anode and expanded graphite as cathode. When using Sn foil as the anode, the K‐DIB presents a high reversible capacity of 66 mAh g^?1 at a current density of 50 mA g^?1 over the voltage window of 3.0–5.0 V, and exhibits excellent long‐term cycling performance with 93% capacity retention for 300 cycles. Moreover, as the Sn foil simultaneously acts as the anode material and the current collector, dead load and dead volume of the battery can be greatly reduced, thus the energy density of the K‐DIB is further improved. It delivers a high energy density of 155 Wh kg^?1 at a power density of 116 W kg^?1, which is comparable with commercial lithium‐ion batteries. Thus, with the advantages of environmentally friendly, cost effective, and high energy density, this K‐DIB shows attractive potential for future energy storage application.     

Novel 2D Layered Molybdenum Ditelluride Encapsulated in Few‐Layer Graphene as High‐Performance Anode for Lithium‐Ion Batteries

Molybdenum ditelluride nanosheets encapsulated in few‐layer graphene (MoTe₂/FLG) are synthesized by a simple heating method using Te and Mo powder and subsequent ball milling with graphite. The as‐prepared MoTe₂/FLG nanocomposites as anode materials for lithium‐ion batteries exhibit excellent electrochemical performance with a highly reversible capacity of 596.5 mAh g^?1 at 100 mA g^?1, a high rate capability (334.5 mAh g^?1 at 2 A g^?1), and superior cycling stability (capacity retention of 99.5% over 400 cycles at 0.5 A g^?1). Ex situ X‐ray diffraction and transmission electron microscopy are used to explore the lithium storage mechanism of MoTe₂. Moreover, the electrochemical performance of a MoTe₂/FLG//0.35Li₂MnO₃·0.65LiMn_0.5Ni_0.5O₂ full cell is investigated, which displays a reversible capacity of 499 mAh g^?1 (based on the MoTe₂/FLG mass) at 100 mA g^?1 and a capacity retention of 78% over 50 cycles, suggesting the promising application of MoTe₂/FLG for lithium‐ion storage. First‐principles calculations exhibit that the lowest diffusion barrier (0.18 eV) for lithium ions along pathway III in the MoTe₂ layered structure is beneficial for improving the Li intercalation/deintercalation property.     

Exposing {010} Active Facets by Multiple‐Layer Oriented Stacking Nanosheets for High‐Performance Capacitive Sodium‐Ion Oxide Cathode

As one of the most promising cathodes for rechargeable sodium‐ion batteries (SIBs), O3‐type layered transition metal oxides commonly suffer from inevitably complicated phase transitions and sluggish kinetics. Here, a Na[Li_0.05Ni_0.3Mn_0.5Cu_0.1Mg_0.05]O₂ cathode material with the exposed {010} active facets by multiple‐layer oriented stacking nanosheets is presented. Owing to reasonable geometrical structure design and chemical substitution, the electrode delivers outstanding rate performance (71.8 mAh g^?1 and 16.9 kW kg^?1 at 50C), remarkable cycling stability (91.9% capacity retention after 600 cycles at 5C), and excellent compatibility with hard carbon anode. Based on the combined analyses of cyclic voltammograms, ex situ X‐ray absorption spectroscopy, and operando X‐ray diffraction, the reaction mechanisms behind the superior electrochemical performance are clearly articulated. Surprisingly, Ni²⁺/Ni³⁺ and Cu²⁺/Cu³⁺ redox couples are simultaneously involved in the charge compensation with a highly reversible O3–P3 phase transition during charge/discharge process and the Na⁺ storage is governed by a capacitive mechanism via quantitative kinetics analysis. This optimal bifunctional regulation strategy may offer new insights into the rational design of high‐performance cathode materials for SIBs.     

Nitrogen Doped γ‐Graphyne: A Novel Anode for High‐Capacity Rechargeable Alkali‐Ion Batteries

High energy density is the major demand for next‐generation rechargeable batteries, while the intrinsic low alkali metal adsorption of traditional carbon–based electrode remains the main challenge. Here, the mechanochemical route is proposed to prepare nitrogen doped γ‐graphyne (NGY) and its high capacity is demonstrated in lithium (LIBs)/sodium (SIBs) ion batteries. The sample delivers large reversible Li (1037 mAh g^?1) and Na (570.4 mAh g^?1) storage capacities at 100 mA g^?1 and presents excellent rate capabilities (526 mAh g^?1 for LIBs and 180.2 mAh g^?1 for SIBs) at 5 A g^?1. The superior Li/Na storage mechanisms of NGY are revealed by its 2D morphology evolution, quantitative kinetics, and theoretical calculations. The effects on the diffusion barriers (E_b) and adsorption energies (E_ad) of Li/Na atoms in NGY are also studied and imine‐N is demonstrated to be the ideal doping format to enhance the Li/Na storage performance. Besides, the Li/Na adsorption routes in NGY are optimized according to the experimental and the first‐principles calculation results. This work provides a facile way to fabricate high capacity electrodes in LIBs/SIBs, which is also instructive for the design of other heteroatomic doped electrodes.