Palyno-morphological attributes of some selected plant species of family Asteraceae from district Dera Ismail Khan,KPK, Pakistan

The current study aimed to investigate the palyno-morphological features of Asteraceous species from District Dera Ismail Khan, Khyber Pakhtunkhwa, Pakistan. A total of 13 species were collected, pressed, identified, and examined by using light and scanning electron microscopy. Both qualitative and quantitative pollen characters were observed, that is, equatorial and polar diameter, number of pores and colpi, exine thickness, exine sculpturing, pollen shape, and P/E ratio. Pollen shapes observed in studied taxa were spheroidal, suboblate, oblate-spheroidal, and lophate-spheroidal. The aperturation patterns of pollens vary from tricolporate to tetracolporate. The maximum polar and equatorial diameter of 75–100 (87.5 ± 13.6) μm and 87.5–117.5 (102.5 ± 16.4) μm, respectively, was recorded in Echinops echinatus, while minimum polar and equatorial diameter of 20–22.5 (21 ± 1.36) μm and 22.5–25 (23.5 ± 1.36) μm, respectively, was recorded in Aster subulatus. Six types of exine sculpturing patterns were observed; echinate, micro-echinate, echinate-microreticulate, microreticulate, echinate-perforate, and scabrate. Maximum exine thickness of 8.75 μm was recorded in E. echinatus and minimum of 1.25 μm in Launaea mucronata. The pollen morphology has valuable significance in understanding the taxonomy of different plant groups and plays a central role in the correct identification and classification of Asteraceous flora at species, generic, and tribe levels.     

Pollen morphological variation of Berberis L. from Pakistan and its systematic importance

Due to overlapping and diverse morphological characters, Berberis is among the most taxonomically complex genera. Palynology is one of the taxonomic tools for delimitation and identification of complex species. In this study, pollens of 10 Berberis species were analyzed through light and scanning electron microscopy. Qualitative as well as quantitative features (pollen shape, size, presence or absence of colpi, colpi length and width, exine thickness, ornamentation, pollen class, aperture, and polar–equatorial ratio) were measured. Five species were observed to have colpate (pantocolpate) with elongated ends, radially symmetrical, isopolar, monads, and psilate‐regulate pollens. In polar view, six pollen were spheroidal, two were ovoid, one spherical, and one oblate. Similarly, variation in pollen length was prominent and the largest pollen on polar view was recorded for B. psodoumbellata 60–65 μm (62.4 ± 0.9), while the smallest one was observed for B. lycium 29–35 μm (32.2 ± 1). The observed variation in both quantitative and qualitative features were important in taxonomic identification. This shows that palynological characters are helpful in identification of Berberis genus at the species level.     

Palyno‐morphological investigations of subtropical endangered flora of Capparidaceae through light and scanning electron microscopy

The research was performed to investigate pollen morphology of endangered species of Capparidaceae in subtropical regions of Pakistan. The distinguishing characters were investigated by using light microscope and scanning electron microscope. Palynological study is comprised of pollen shape, pollen type, exine sculpturing, polar and equatorial diameter, length and width of colpi, mesocolpium, and exine thickness. In polar view, Cleome viscosa exhibited the highest pollen size 26.4 (32.7–24.5 μm) ±0.776 whereas Capparis spinosa appeared to be the lowest 12.6 (14.5?10.7 μm) ±0.400. In equatorial view, Cleome viscosa had the largest pollen size 17.1 (20.0–15.0 μm) ±0.606 and Capparis spinosa had the smallest pollen size 9.7 (12.50–8.00 μm) ±0.394. The maximum fertility percentage has been observed in Capparis spinosa, that is, 98.96% and minimum in Cleome viscosa, that is, 82.93%. Diagnostic key has been constructed to state the essential diagnostic features by means of which the taxa can be identified. Remarkable variations have been observed in pollen size, shape, and exine sculpturing. All the selected species were tricolporate. Prolate to subprolate pollen were observed. There is a great variation existed in exine sculpturing such as in Capparis decidua and C. sp. nova sculpturing is reticulate, in Capparis himalayensis sculpturing is Scabrate granulate, in Capparis spinosa sculpturing is Psilate, in Cleome viscosa sculpturing is regulate‐reticulate, in Dipterygium glaucum sculpturing is regulate and in Gynandropsis gynandra sculpturing is striate‐regulate. On the basis of overall characteristics of pollen it seems that palynology of this family is helpful at the generic and specific level.     

Comparative light and scanning electron microscopy in authentication of adulterated traded medicinal plants

The medicinal plants are utilized globally considering the cheap and chemical free source, but their correct identification and authentication is prerequisite for safety and efficacy of plant‐based medicines. The present study encompassed traded medicinal plants (16) with high therapeutic value from diverse families like Brassicaceae, Berberidaceae, Malvaceae, Salicaceae, Myrtaceae, Papilionaceae, Ascelpiadaceae, Colchicaceae, Violaceae, and Vitaceae for detailed microscopic study of characters that is, morphology, pollen shape and sizes, P/E ratio, pore length and width, spine length, colpi dimensions, and exine sculpture pattern. The plants showed noteworthy differences in microscopy of Wattakaka volubilis having pollinia, translator and corpusculum like structures while pores were visible in Colchicum luteum, Alcea rosea, and Hibiscus syriacus. The spines were observed in Centipeda minima, A. rosea, and H. syriacus being dimorphic spines in A. rosea and monomorphic in H. syriacus. The exine sculpturing pattern was reticulate in mostly studied plants however distinctive exine pattern was noted in Berberis aristata and Berberis lyceum. The highest polar diameter, equatorial diameter and exine thickness among studied plants were observed in H. syriacus (161 μm), C. luteum (50 μm) and Vitis jacquemontii (1.10), respectively. Thus, microscopy of medicinal plants in addition to other taxonomic evidence offers a supportive skill in authentication, consequently utilization by local consumers and pharmaceutical industries.     

Pollen diversity and its implications to the systematics of mimosaceous species by LM and SEM

In this study we have discussed pollen morphology of 14 mimosaceous species belonging to five genera by using light microscopy (LM) and scanning electron microscopy (SEM). The palynological features of species were determined by both qualitative and quantitative characters. The qualitative characters include pollen shape, colpi arrangement, and exine sculpturing. Oblate spheroidal shaped pollens were noted in Albizia procera, Albizia lebbeck, Acacia tortilis, Acacia ampliceps, and Acacia modesta, subprolate shaped pollen in Leucaena leucocephala, Prosopis julifera, and Acacia nilotica, prolate pollen in Acacia farnesiana and Prosopis glandulosa while spheroidal, sub spheroidal and sub oblate pollen grains were observed in Acacia catechu, Mimosa himalayana, Prosopis cineraria, respectively. Sparsely foveolate, reticulate, scabrate, and scrobiclate exine sculpturing were observed. Colpi with sunken ornamentation were seen in P. cineraria, P. glandulosa, P. juliflora, and L. leucocephala while colpi were absent in rest of the studied species. The quantitative characters were statistically studied using SPSS software. The current study gives important morpho‐palynological characters for identifying and validation of close related and similar taxa which will aid to the phylogenetic analysis of Mimosaceae family.     

Implication of palynological techniques for the authentication of adulterated drugs traded with the same name in different herbal markets of district Lahore,Pakistan

Adulteration in traded medicinal plants is a significant issue nowadays and use of these adulterated medicinal plants can impose harmful impact to end user. However, this problem can be overcome by ensuring the identification of traded medicinal plants which are used in making different herbal medicines. In this regard, palynological markers are considered to be an important taxonomic tool in the identification of original medicinal plant from its adulterant. Hence this study attempted to provide particular reliable palynological markers for distinguishing selected medicinal plants from their adulterants, that is, Cinnamomum verum versus Canella winterana, Cinnamomum tamala versus Cinnamomum obtusifolium, Gymnema sylvestre versus Gymnema lactiferum, Artemisia maritima versus Artemisia absinthium, Achillea millefolium versus Adhatoda vasaka, Sphaeranthus indicus versus Sphaeranthus africanus, Averrhoa carambola versus Butea monosperma, and Morus nigra versus Morus alba. Results demonstrated great variations in multiple palynological characters between original medicinal plant and its adulterant such as in pollen size, shape, colpi length, exine, intine thickness, and fertility. In equatorial view, circular to spheroidal shape of pollen was found in A. millefolium while oblate shape was observed in A. vasaka. Similarly B. monosperma pollen was 34 μm, whereas pollen of its adulterant A. carambola was 21 μm. Moreover, colpi length of A. maritima was 11.8 μm, whereas 4.5 μm in A. absinthium. Hence it can be concluded that palynological characters are commendably helpful in identification of genuine medicinal plant from its adulterant.     

Palynological investigation of some selected species of family Fabaceae from Pakistan,using light and scanning electron microscopy techniques

Pollen morphology of 11 species of family Fabaceae that is, Trifolium alexandrinum, Trifolium resupinatum, Arachis hypogaea, Lathyrus aphaca, Medicago lupulina, Vicia sativa, Lathyrus odoratus, Pongamia pinnata, Melilotus indicus, Medicago polymorpha, Medicago sativa from Pakistan has been investigated by light and scanning electron microscopy. Pollen were generally tricolporate, radially symmetrical, isopolar, elliptic in equatorial view and triangular in polar view under LM. Results showed that pollens were per‐prolate (T. alexandrinum), prolate (T. resupinatum, V. sativa, L. odoratus, Melilotus indicus, M. polymorpha, M. sativa) and sub‐prolate (A. hypogaea, L. aphaca, M. lupulina, P. pinnata). The larger polar/equatorial (P/E) ratio was found in T. alexandrinum (2.26 μm) and the smallest was found in M. lupulina (1.21 μm). The exine of T. resupinatum was 3.00 μm in thickness while others posses smaller exine thickness. The larger pore diameter was found in P. pinnata (16.01 μm) while others have smaller. The length of colpi was larger in Arachis hypogaea (32.24) while others posses smaller. Eight types of surface ornamentation (Psilate, faintly rugulate). Perforate and rugulate to verrucate have been observed under SEM. The pollens were europalynous type. Pollen morphology proved to be useful for the specific delimitation and serve as a tool for the identification and classification of taxa at specific and generic levels and can also be used as a key for the taxonomic features. Diversity in exine sculpture is helpful indicative characters for the isolation of closely related species. Hence, it is clear that both qualitative and quantitative characters of pollen can be useful for differentiating between taxa at specific level.     

Systematic significance of pollen morphology and foliar epidermal anatomy of medicinal plants using SEM and LM techniques

Alternative medicinal source is a hot issue within medicine community now a days due to various side effects of allotropic drugs; most importantly the multidrug resistance phenomena. Medicinal plants provide an attractive and effective alternative to modern synthetic drugs as they contain different types of bioactive compounds, having great potential in treatment of various diseases. The present study deals with identification of micromorphological characteristics of 10 ethnomedicinally important plants of Northern Pakistan, that is, Aster himalaicus C. B. Clarke, Artemisia maritima (Berg.) Wellkomm, Isodon rugosus (Wall. ex Benth.), Myricaria squamosal Desv, Pedicularis groenlandica Retz. Polygonum aviculare L, Salvia himmelbauer E. Peter, Swertia kingie Hook. f., Tanacetum dolichophyllum (Kitam) Kitam, Verbascum epixanthinum Boiss. & Heldr. as potential source for pharmaceutical industry. The characters studied were shape and size of pollen, polar diameter and equatorial diameter, epidermal cell shape and size, stomata width and length, trichome shapes, and type. Most of the species had tricolporate pollen type but hexacolporate pollen was also observed in Isodon rugosus, Polygonum aviculare, Salvia himmelbauer. Different types of exine sculpturing observed were foveolate, scabrate, lophate, regular, steriate, and alveolate. Minimum equatorial diameter was noted in Tanacetum dolichophyllum (12.4 μm) and maximum in Myricaria squamosal (20.9 μm). Shape of epidermis cell ranged from rectangular and irregular, polygonal and pentagonal. Different types of stomata like anisocytic, actinocytic, paracytic, and diacytic were noticed. Variations in microscopic characters observed in the current study have great potential to be used as identification tools by the taxonomists for further studies.     

Scanning electron microscopic imaging of palynological metaphors: A case study of family Poaceae taxa

This study highlighted the taxonomic utilization of palynological metaphors for selected members (53) of family Poaceae. Multiple microscopic technique light and scanning electrons had been employed for detailed analysis. Results reported monad pollen type in all studied 53 members, which showed its limited taxonomic value up to family level. In relation to shape of pollen both polar and equatorial views strikingly differed from each other. Like semi angular pollen observed in Dactyloctenium aegyptium (L.) Wild. whereas round-minutely irregular pollen in Lolium temulentum L. Polar and equatorial diameter also showed variation, that is, Desmostachya bipinnata (L.) Stapf. can be differentiated from Sorghum bicolor (L.) Moench on diameter variation basis. A pore characteristic does not show much qualitative variation; however pore sizes differ species to species. The most frequently scarbate sculpturing was observed in 28 species followed by verrucate. Hence it can be said that pollen shape, polar, and equatorial diameters, pore size, P/E ratio, pore sculpturing are of good taxonomic value and holds a significant position in identification and delimitation of Poaceae taxa.     

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 μm while minimum in M. compressa 38.42 and 21.05 μm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus‐indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro‐echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.     

Taxonomic importance of pollen morphology in Veratrum L. (Melanthiaceae) using microscopic techniques

Previous studies reported that intrageneric relationships of genus Veratrum of family Melanthiaceae are controversial and hard to delimit. Therefore, we observed the pollen morphological features of six species in the genus Veratrum in detail using both light microscopy and scanning electron microscopy and investigated their significance for Veratrum taxonomy. Among them, five were studied for the first time. The results demonstrated that pollen grains of Veratrum are medium in size with P/E being 0.31–0.60. Three types of shape in polar view have been observed elliptic, long‐elliptic, or wide‐elliptic with blunt or rounded at both ends. Two types of width of colpus reported narrow or wide, two types of depth of colpus reported deep or flat, and two types of length of colpus reported extend almost or do not extend to the ends, whereas two types of colpus membranes reported absent or obvious. One type of surface ornamentation was noted as reticulate. These results support species Veratrum album and Veratrum lobelianum as well as Veratrum grandiflorum and Veratrum oxysepalum as two independent species, respectively, rather than classifying Veratrum into two sections. Overall, we demonstrated that the ratio of polar axis length to equatorial axial length, pollen characteristics at the polar view, the colpus morphology, and the surface ornamentation of pollen grains of genus Veratrum have important systematic significance in identification and delimitation of species.     

Palyno-anatomical characters and their systematic significance in the family Apiaceae from Chitral,eastern Hindu Kush,Pakistan

The present study was performed to provide a detailed explanation of leaf epidermal anatomy and pollen micromorphological features of selected species of family Apiaceae from Chitral, eastern Hindu Kush region as the basis of forthcoming studies. In the present article pollen morphology of eight species and foliar epidermal of seven species of family Apiaceae have been examined through microscopic techniques. In results two types of pollen prolate (five species) and perprolate (three species) with three colpi have been recorded. The exine ornamentation was found to be regulate, striate, and cerebroid. Largest pollen was found in Heracleum leucocarpum with the polar diameter of 43.25 μm and equatorial diameter of 21.6 μm. Smallest pollen was observed in Elaeosticta chitralica with the polar diameter of 18.4 μm. The P/E ratio varied from 1.59 to 2.16. Regarding to foliar epidermal anatomy, three types of epidermal cells including rectangular, irregular, and polygonal with variation in anticlinal wall pattern were determined. In the selected species three kinds of stomata comprising anisocytic, anomocytic, and paracytic type were reported in the current research. The size of epidermal cells ranged from 106 × 42.50 μm in Bupleurum falcatum subsp. cernuum and 77.25 × 26.35 μm in Prangos pabularia in adaxial surface. Largest stomatal complex was found in Prangos pabularia both in adaxial 33.55 × 20.05 μm and abaxial 50.25 × 39.40 μm. All the observed quantitative and qualitative features of the species were proved to be useful in the delimitation of species at generic and species level.     

Palynological investigation of lactiferous flora (Apocynaceae) of District Rawalpindi,Pakistan, using light and scanning electron microscopy

This was the first comprehensive pollen micromorphological investigation of lactiferous flora (Apocynaceae) of District Rawalpindi, Pakistan. The pollen morphology of 10 species of the family Apocynaceae was observed and documented using light microscopy and scanning electron microscopy. Pollen was found subspheroidal in shape in most of the species, however peroblate shape was noted in Vinca major. Exine sculpturing patterns (psilate, rugulate, scabrate, and microreticulate) were observed. The result indicated that exine ornamentation of Apocynaceae taxa is systematically informative at generic and species levels. Most of the species have tricolporate type pollen but tetraporate pollen was also observed in Trachelospermum jasminoides and tetracolpate in V. major. Minimum equatorial diameter was noted in Carissa edulis (27.13 μm) and maximum in V. major (108.25 μm). Similarly, maximum exine thickness was found in Cascabela thevetia (9.5 μm). In the present findings, the pollen morphological data are compared with available other pollen studies to evaluate the taxonomic value of pollen traits in Apocynaceae taxa by using multiple microscopic techniques. Furthermore, molecular and phylogenetic studies were recommended to strengthen the systematics of Apocynaceae taxa.     

Taxonomic study of subfamily Nepetoideae (Lamiaceae) by polynomorphological approach

The present study is insight into pollen morphology for characterizing species and their utility in the taxonomic separation of certain taxa of subfamily Nepetoideae (Lamiaceae) from Pakistan. The pollen micromorphology of 11 species of the Nepetoideae was analyzed and documented using light microscopy and scanning electron microscopy (SEM) for both qualitative and quantitative characteristics. Most species have hexazonocolpate pollen grains but trizonocolpate and tetrazonocolpate pollen with circular and oval amb were also rarely observed in Mentha spicata. The basic pollen shape in most of the studied species was subspheroidal but prolate grains were also observed in M. spicata, S. coccinea, and S. plebeia. The exine sculpturing of Nepetoideae pollen was taxonomically very informative particularly at subfamily level. Observations of exine sculpturing with SEM revealed various types of pollen grains: reticulate, bireticulate, microreticulate, perforate, aerolate, and gammate. The bireticulate type further subdivided into three subtypes based on the number of secondary lumina in each primary lumen and is characterized by varying characteristics of the secondary reticulum and primary muri. A significant variation was observed in colpus surface ornamentation. The maximum polar diameter was found in O. americanum (58 ± 5.8 μm) and the maximum equatorial diameter observed in O. basilicum (50.25 ± 1.37 μm). Pollen features of the studied species were discussed and compared based on the current taxonomical concepts. The results showed that pollen traits of the subfamily Nepetoideae was found significant to classify the taxa. Furthermore, pollen features provide additional evidence to distinguish macromorphologically similar taxa from each other.     

Taxonomic importance of spore morphology in Thelypteridaceae from Northern Pakistan

Spore morphology of Thelypteridaceae species growing in Malakand Division, Northern Pakistan, was studied using both light microscopy and scanning electron microscopy. The taxa are Christella dentata and Glaphyropteridopsis erubescens in the subfamily Thelypteridoideae, and Phegopteris connectilis, Pseudophegopteris pyrrhorhachis, and Pseudophegopteris levingei in the subfamily Phegopteridoideae. The studied species exhibit differences in spore size, exospore thickness, color, and ornamentation. Spores of the studied species are monolete and medium‐sized, and shape is ellipsoidal in both polar and equatorial views. The average measurement of the polar diameter ranges from 27 μm to 31 μm, whereas in the equatorial direction it varied from 20 μm to 40 μm. The exospore thickness ranges from 1.2 μm to 2.4 μm. Reticulate, laevigate with microgranules, cristate, and coarsely echinate surface ornamentation are observed among the species. Multivariate analysis including unweighted pair group method with arithmetic mean and principal component analysis was used for the grouping and discrimination of species and genera.     

Pollen morphology of the genus Sophora (Fabaceae) and its taxonomic implications

The genus Sophora (Fabaceae) is one of the taxonomically challenging genera with high economic and medical values. In this study, the pollen morphology of 43 samples of 27 species, 4 subspecies, and 4 varieties of the genus Sophora and 3 closely related genera was examined using scanning electron microscopy to evaluate the pollen diversity of the genus and its taxonomic significance. Pollen grains of the studied species were tricolporate (rarely six-aperture), and pollen shape varied from suboblate, spheroidal, subprolate to prolate. Echinate external ornamentation was reported for the first time in some species of the genus. Aperture membrane ornamentation and outline in a polar/equatorial view were described for the first time in the genus. Principal component analysis was used to understand the relationship and discrimination between the species and the genera, with six components accounting for 79.92% of the total variance. Taxonomic keys based on pollen morphology were also constructed to easily identify the taxa of the genus through palynological characteristics. Results showed that pollen morphology alone is not sufficient to elucidate or reconstruct taxonomic relationships within the genus Sophora, but palynological assessments can provide some useful information for identifying taxonomically problematic taxa.     

Pollen morphology of subfamily Caryophylloideae (Caryophyllaceae) and its taxonomic significance

The Pollen morphology of subfamily Caryophylloideae (Caryophyllaceae) from different phytogeographical region of Pakistan has been evaluated. In this research, 16 species belong to 6 genera of subfamily Caryophylloideae have been studied using light (LM) and scanning electron microscopy (SEM) for both qualitative and quantitative characters. Different palyno‐morphological features were observed including; pollen ornamentation, pore ornamentation, echini arrangement, echinidensity, number of pori, size of polar and equatorial diameter, P/E ratio, exine thickness, and size of pore were studied. The palyno‐morphological characters of subfamily Caryophylloideae have taxonomically significant in identification and delimitation of species. Two pollen types, i.e., subspheroidal (15 species) and prolate (one species Vaccaria hispanica) were observed. Microechinate‐punctate and microechinate‐perforate pollen ornamentation were examined. Two pollen types of pori, i.e., prominent (5 species) and sunken (11 species) ornamentation have been reported. Three types of echini arrangement have been reported irregular, regular and rather regular, while three type of echinidensity (i.e., medium, dense and sparse) were observed. Pori numbers were found different in different species range from 5 in Silene apetala to 19‐35 in Silene vulgaris. Based on different palyno‐morphological characters, taxonomic key was develop for quick and accurate identification. The quantitative data were processed using SPSS software for average, minimum, maximum, and standard error.     

Palynological characteristics of some selected species of family Cucurbitaceae (Juss.) using light and scanning electron microscopy techniques

The pollen morphology of 11 species distributed in seven genera belonging to family Cucurbitaceae has been studied using light microscopy (LM) as well as scanning electron microscopy. Pollen morphology of this family is diverse and is almost europalynous. Nearly all types of pollen belonging to different size class and shape class with a variety of exine sculpturing are found in the family. Pollen grains are usually triporate to tricolporate, prolate, oblate‐spheroidal, spheroidal, to suboblate, radially symmetrical, and isopolar. The common exine pattern is reticulate of various forms ranging from finely reticulate to coarsely reticulate with some species having echinate type of exine ornamentation, for example, Cucurbita pepo and Praecitrullus fistulosus. Most of the studied species are somewhat triangular with respect to equatorial outlook and circular to elliptic in polar outlook. The palynological characteristics of the members of the family are useful in identification of taxa at generic level mostly. Based on the present study it is not recommended to wholly solely depend upon the pollen morphology for the identification of taxa especially at specific levels because very minor differences regarding pollen characters exist among the species of the same genera.