Free Convection Heat Transfer from a Confined Horizontal Elliptic Cylinder

The laminar free convection heat transfer from an isothermal horizontal cylinder of elliptical cross-section confined between two adiabatic walls is investigated by the Mach-Zehnder interferometry technique. The ellipse major axis is vertical, and the minor to major axis ratio is kept constant to 0.53. This paper focuses on the effect of wall spacing and Rayleigh number variation on the local and average free convection heat transfer coefficient from the cylinder surface. The local and average Nusselt numbers were determined for the Rayleigh number range of 9 × 10 ² to 3.2 × 10 ³ and wall spacing to cylinder minor axis ratios of 1.9, 2.3, 2.67, 3.17, 3.8, 4.6, 6.12, 8, 13, ∞. Results are indicated with a single correlation that gives the average Nusselt number as a function of the ratio of the wall spacing to cylinder minor axis and the Rayleigh number. There is an optimum distance between the walls in which the Nusselt number is maximum. The experiment was also carried out on a cylinder of circular cross-section with the same periphery and length of the elliptic cylinder to allow a comparison with the results of other research.     

Natural convection heat transfer from two horizontal cylinders using a large lateral shearing interferometer

Natural convection heat transfer from two horizontal cylinders in the air was investigated experimentally and numerically. Two cylinders were spaced at 1.3, 1.8, and 2.7 cylinder diameters horizontally. The experiments were carried out by large lateral shear interferometry (LSI) for various Rayleigh numbers in the range of 10³ to 10⁴. Large LSI is common path interferometry with the advantages of simple structure, strong antivibration, and fewer required optical components. It is not necessary for LSI to perform a complex algorithm to restore wavefront with a large shear amount. Simple and infinite fringe interferograms of the cylinders heated from ambient temperature 282.15 to 723.15 K were obtained. A numerical simulation was carried out with ANSYS-Fluent 18.0. The influence of two factors, the distance between the cylinders, and the Rayleigh number, on the heat transfer of two horizontal cylinders was examined. The average Nusselt number and local Nusselt number were determined from the experimental results and numerical results, respectively, and the two results were in good agreement. The rising direction for the plume flow pattern of each horizontal cylinder was no longer simply vertically upward but was inclined toward the central symmetry axis of the two cylinders. In addition, the heat transfer from a cylinder increased with the cylinder spacing at any Rayleigh number.     

Natural convective heat transfer in square enclosures heated from below

The paper deals with the results of an experimental and numerical study of free convective heat transfer in a square enclosure characterized by a discrete heater located on the lower wall and cooled from the lateral walls.The study analysed how the heat transfer develops inside the cavity at the increasing of the heat source length.The experimental data are obtained by measuring the temperature distribution in the air layer by real-time and double-exposure holographic interferometry while the commercial finite volumes code Fluent 6.0 is used for the numerical study. Convection has been studied for Rayleigh number from 10³ to 10⁶. Different convective forms are obtained depending on Ra and on the heat source length.The local Nusselt number is evaluated on the heat source surface and it shows a symmetrical form raising near the heat source borders. Graphs of the local Nusselt number on the heat source and of the average Nusselt number at several Ra are finally presented.     

Lattice Boltzmann simulation of natural convection heat transfer in an elliptical-triangular annulus

A numerical study for steady-state, laminar natural convection in a horizontal annulus between a heated triangular inner cylinder and cold elliptical outer cylinder was investigated using lattice Boltzmann method. Both inner and outer surfaces are maintained at the constant temperature and air is the working fluid. Study is carried out for Rayleigh numbers ranging from 1.0 × 10³ to 5.0 × 10⁵. The effects of different aspect ratios and elliptical cylinder orientation were studied at different Rayleigh numbers. The local and average Nusselt numbers and percentage of increment heat transfer rate were presented. The average Nusselt number was correlated. The results show that by decreasing the value of aspect ratio and/or increasing the Rayleigh number, the Nusselt number increases. Also the heat transfer rate increases when the ellipse positioned vertically.     

An experimental investigation on the effect of a perforated fin on free convection heat transfer from a confined horizontal cylinder

Natural convection heat transfer from an isothermal horizontal fin attached to a cylinder, confined between two adiabatic walls of constant height is investigated by the Mach–Zehnder interferometry technique. This study is focused on the effect of a perforated fin attached to the bottom of a cylinder while the vertical position of the cylinder (Y ) changes between two walls with a constant distance of W measuring 1.5 times the cylinder diameter. The cylinder's average Nusselt numbers are determined for three ratios of vertical position to its diameter, Y /D = 0.5, 1.5, 2, and 3. The Rayleigh number ranges from 4.5 × 10³ to 1.2 × 10⁴. The distance between the walls is chosen to be 1.5 D, that is, an optimum distance at which the Nusselt number is maximum. The effect of the perforated fin on free convection heat transfer is investigated and compared with other works. Results show outstanding enhancement in heat transfer, with a minimum result of 40% and maximum of 90%. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library (wileyonlinelibrary.com/journal/htj). DOI 10.1002/htj.21041     

A Parametric Study of Prandtl Number Effects on Laminar Natural Convection Heat Transfer From a Horizontal Circular Cylinder to Its Coaxial Triangular Enclosure

A parametric study of Prandtl number effects on laminar natural convection heat transfer in a horizontal equilateral triangular cylinder with a coaxial circular cylinder is conducted. The Prandtl number is varied over a wide range from 10^?2 to 10⁵, which corresponds to a variety of working fluids. The governing equations with the Boussinesq approximation for buoyancy are iteratively solved using the finite volume approach. It is shown that the flow patterns and temperature distributions are unique for low-Prandtl-number fluids (Pr ≤ 0.1), and are nearly independent of Prandtl number when Pr ≥ 0.7. In addition, the inclination angle of the triangular enclosure is found to noticeably affect the variations of the local Nusselt number, and to have insignificant influence on the average Nusselt numbers for low Rayleigh numbers when Pr ≥ 0.7.     

Effect of Fluid Yield Stress on Natural Convection From Horizontal Cylinders in a Square Enclosure

In this study, laminar natural convection heat transfer to Bingham plastic fluids from two differentially heated isothermal cylinders confined in a square enclosure (with isothermal walls) has been investigated numerically. The governing partial differential equations have been solved over the ranges of the dimensionless parameters, namely, Rayleigh number, 10² to 10⁶, Prandtl number, 10 to 100, and Bingham number, 0.01 to 100, for seven locations of inner cylinders as ±0.25, ±0.2, ±0.1 and 0. These values correspond to the range of Grashof number varying from 10 to 10⁵. The detailed flow and temperature fields are visualized in terms of the streamlines and isotherm contours. Further insights are developed by examining the iso-shear rate contours and the yield surfaces delineating the fluid-like and solid-like regions. The corresponding heat transfer results are analyzed in terms of the distribution of the local Nusselt number along the cylinder surface together with its surface averaged value as functions of the Rayleigh number, Prandtl number, Bingham number, and positions of the cylinders. It is found that the average Nusselt number increases with the increasing values of the Rayleigh number and decreases with the increasing Bingham number. For sufficiently large values of the Bingham number, the average Nusselt number reaches its asymptotic value wherein heat transfer takes place solely by conduction. Based on the present numerical results, simple correlations for the prediction of the average Nusselt number and the limiting Bingham number have been developed. Also, a dimensionless criterion denoting the cessation of convection regime is outlined for this configuration.     

Effect of the Inclination Angle and Eccentricity on Free Convection Heat Transfer in Elliptical–Triangular Annuli: A Lattice Boltzmann Approach

In this study, a Lattice Boltzmann method is used to simulation steady-state, laminar, free convection in two-dimensional annuli between a heated triangular inner cylinder and elliptical outer cylinder. The gap is filled with air as the working fluid. A constant temperature boundary condition is imposed on both the inner and outer surfaces. The study is performed for different inclination angles of inner triangular and outer elliptical cylinders at Ra = 10⁴. The inclination angle is varied from 0° to 120° for the triangular cylinder and from 0° to 90° for the elliptical cylinder. Furthermore, the vertical and horizontal eccentricity of the inner cylinder is investigated. The results for the inner and outer cylinders are presented in the form of isotherms, streamlines, and local and average Nusselt numbers. The results indicated that overall average Nusselt number has a type of nonlinear polynomial function with the triangular inclination angles and an approximately linear relation with the elliptical inclination angles. Also, the overall average Nusselt number decreases with the inclination of the outer elliptical cylinder. In addition, the results show that maximum heat transfer rate is reached when the inner cylinder is located at the center of the elliptical cylinder and at the lowest possible location vertically.     

Forced convection heat transfer from a circular cylinder in crossflow to air and liquids

Local and average heat transfer by forced convection from a circular cylinder is studied for Reynolds number from 2 × 10³ to 9 × 10⁴ and Prandtl number from 0.7 to 176. For subcritical flow, the local heat transfer measurement indicates three regions of flow around the cylinder: laminar boundary layer region, reattachment of shear layer region and periodic vortex flow region. The average heat transfer in each region is calculated and correlated with the Reynolds number and the Prandtl number. The Nusselt number in each region strongly depends on the Reynolds number and the Prandtl number with different power indices. An empirical correlation for predicting the overall heat transfer from the cylinder is developed from the contributions of heat transfer in these three regions.     

NATURAL CONVECTION AND ENTROPY GENERATION FROM A CYLINDER WITH HIGH CONDUCTIVITY FINS

The problem of laminar natural convection from a horizontal cylinder with multiple equally spaced high conductivity fins on its outer surface was investigated numerically. The effect of several combinations of number of fins and fin height on the average effective Nusselt number was studied over a wide range of Rayleigh numbers. The results showed that there was an optimal combination of number of fins and fin height for maximum heat transfer from the cylinder for a given value of Rayleigh number. A high number of short fins slightly decreased the heat transfer from the cylinder. The calculated velocity and temperature profiles also were used to study the total entropy generation. The total entropy production was dominated by entropy generation due to thermal effects. The exception was at Ra _D = 10³ and a large cylinder diameter where entropy generation was dominated by entropy generation due to viscous effects. This information can be used to access the changes in the thermodynamic efficiency due to the addition of fins to enhance the natural convection heat transfer from a horizontal cylinder.     

Lattice Boltzmann simulation of mixed convection heat transfer in eccentric annulus

Mixed convection heat transfer in eccentric annulus was simulated numerically by lattice Boltzmann model (LBM) based on multi-distribution function double-population approach. The effect of eccentricity on heat transfer at various locations was examined at Ra = 10⁴ and σ = 2. Velocity and temperature distributions as well as Nusselt number are obtained. The results are validated with published results and shown that multi-distribution function approach can evaluate the velocity and temperature fields in curved moving boundaries with a good accuracy in comparison with the previous studies. The results show that the average Nusselt number increases when the inner cylinder moves downward regardless of the radial position.     

Effect of Prandtl Number on Free Convection from Two Cylinders in a Square Enclosure

This study explores the effect of Prandtl number on the laminar natural convection heat transfer to Newtonian fluids in a square enclosure consisting of one hot circular cylinder and one cold circular cylinder. The walls of the square enclosure are maintained isothermal and at the same temperature as the cold cylinder and the fluid medium. The governing partial differential equations have been solved numerically over the following ranges of conditions: Grashof number, 10 to 10⁵; Prandtl number, 0.7 to 100 (or the range of Rayleigh numbers as 7 to 10⁷); and relative positioning of the cylinders, ?0.25 to 0.25. However, the ratio of the radius of the cylinder to the side of the enclosure is held fixed at 0.2. Extensive results on the streamline and isotherm contours, the local Nusselt number distribution, and the average Nusselt number are discussed to delineate the influence of Grashof and Prandtl numbers on them for a given location with respect to the horizontal center line. The surface-averaged Nusselt number shows a positive dependence on Grashof and Prandtl numbers for a fixed location of the two cylinders. The heat transfer results have been correlated as a function of the Rayleigh number and geometric parameters, thereby enabling its prediction in a new application.     

Natural convection heat transfer in horizontal concentric annulus between outer cylinder and inner flat tube using nanofluid

Natural convection heat transfer in two-dimensional region formed by constant heat flux horizontal flat tube concentrically located in cooled horizontal cylinder was studied numerically by using nanofluid. The model solved using the FLUENT CFD package. The numerical simulations covered a range of hydraulic radius ratio (5, 7.5, and 10) at orientation angles from 0° up to 90°.The results showed that the average Nusselt number increases with hydraulic radius ratio, orientation angles and Rayleigh number, as well as enhancement ratio for Nusselt number at orientation angle 90° and hydraulic radius ratio 7.5 is equal to 24.87%. Both the nanofluid flow and heat transfer characteristics for different cases are illustrated that obtained from the CFD code. The results for the average Nusselt numbers are compared with previous works and show good agreement.     

Simulation of mixed convection heat transfer in a horizontal channel with an open cavity containing a heated hollow cylinder

The objective of this paper is to numerically investigate the mixed convective flow and heat transfer controlled by a heated hollow cylinder inside an open cavity attached with a horizontal channel. All the boundaries of the channel and cavity are perfectly insulated while the inner surface of the cylinder is heated uniformly by heat flux q. The equations of conservation of mass, momentum, and energy were solved using adequate boundary conditions by Galarkin's weighted residual finite element technique. The solution has been performed in the computational domain as a whole with proper treatment at the solid/fluid interface. Computations have been conducted for Ra = 10³–10⁵, Prandtl number Pr varying from 0.7 to 7 and ratio of solid to fluid thermal conductivities from 0.2 to 50. Results are presented in terms of streamlines, isotherms, heat transfer rate in terms of the average Nusselt number (Nu_av), drag force (D), and maximum bulk temperature (θ_max). © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21002     

Natural convection heat transfer between inner sphere and outer vertically eccentric cylinder

The effects of eccentricity and geometric configuration with a Newtonian fluid have been investigated numerically to determine heat transfer by natural convection between the sphere and vertical cylinder with isothermal boundary conditions. The inner sphere and outer vertical cylinder were heated and cooled in a steady change of temperature. Calculations were carried out systematically for a range of the Rayleigh numbers to determine the average Nusselt numbers which are affected by the geometric ratio (HR:RR) and eccentricity (ε) parameters on the flow and temperature fields. The governing equations, in terms of vorticity, stream function and temperature are expressed in a spherical polar coordinate system. Results of the parametric study conducted further reveal that the heat and flow fields are primarily dependent on the Rayleigh number, eccentricity and geometric configuration, for a Prandtl number of 0.7, with the Rayleigh number ranging from 10³ to 10⁶, the three eccentricities and two geometric configurations. Above all, the specification of different convective configurations has a significant effect on the average heat transfer rate across the composite annulus gap.     

Transient natural convective heat transfer of a low-Prandtl-number fluid from a heated horizontal circular cylinder to its coaxial triangular enclosure

Transient natural convective heat transfer of liquid gallium, which has a Prandtl number of 0.023 at 310 K, from a heated horizontal circular cylinder to its coaxial triangular enclosure is studied numerically by employing the control volume method. Two orientations of the triangular cylinder are investigated and the Grashof number is varied from 10⁴ to 10⁷. Development of natural convection is presented by means of the evolutions of the average Nusselt number over the outer triangular wall. Temporal stages during the course of development are identified and demonstrated through representative snapshots of streamlines and isotherms. The time-averaged Nusselt number is scaled with Grashof number for both conduction- and convection-dominated regimes. It is found that by placing horizontally the top side of the triangular cylinder, the convective flow becomes more stable and the overall heat transfer is enhanced. In addition, pitchfork bifurcation is explored quantitatively and its onset times are predicted as well.     

Numerical studies on laminar natural convection inside inclined cylinders of unity aspect ratio

The effect of cylinder inclination on thermal buoyancy induced flows and internal natural convective heat transfer is explored using CFD simulations. The cylinder’s top and bottom surfaces were maintained at different temperatures while the curved surface was adiabatic. The aspect ratio (length/diameter) of the cylinder was unity and the Prandtl number of the fluid was fixed at 0.71. The Rayleigh number of the confined fluid was varied from 10³ to 3.1 × 10⁴ by changing the specified end wall temperatures. The critical Rayleigh number was estimated to be 3800 for the vertical cylinder. Relaxing the convergence criterion caused false hysteresis in the converged results for the vertical cylinder. Typical natural convective fluid flow and temperature patterns obtained under laminar flow conditions are illustrated for various inclinations ranging from 0° to 180°. Flow visualization studies revealed complex three-dimensional patterns. Different thermal–hydrodynamic regimes were identified and were classified in terms of Rayleigh number and angle of inclination. Empirical correlations for the Nusselt number and maximum velocities in the domain as a function of the inclination angle and Rayleigh number are developed.     

Mixed convection heat transfer in a lid-driven cavity with a rotating circular cylinder

Mixed convection heat transfer in a lid-driven cavity with a rotating cylinder was analyzed numerically for two important parameters - Richardson number, the non-dimensional angular velocity of the cylinder, and the direction of rotation using the commercial software, ADINA. The results from these simulations were validated using an open-source spectral element code, Nek5000. The results of this investigation were presented in terms of streamlines, isotherms, and average and local Nusselt numbers. The present results illustrated that the average Nusselt number was found to depend on the direction of the angular velocity. The average Nusselt number increased with an increase in the clockwise angular velocity of the cylinder for various Richardson numbers. However, it decreased with an increase in the counterclockwise until reached a critical velocity where average Nusselt number increased with an increase in the angular velocity. This study illustrated that the maximum heat transfer can be achieved when placing a rotating cylinder inside a cavity compared with non-rotating cylinder.     

Correlations for Natural Convective Heat Transfer From Vertical and Inclined Cylinders

Natural convective heat transfer from the exposed top surface of an inclined isothermal cylinder, with a circular cross section, mounted on a flat adiabatic base plate, has been numerically investigated. The cylinder is mounted normal to the flat adiabatic base plate. The numerical solution has been obtained by solving the dimensionless governing equations, subject to boundary conditions, using the commercial finite-volume method-based code FLUENT. The flow has been assumed to be symmetrical about the vertical center-plane through the cylinder. Results have only been obtained for Prandtl number of 0.7, which is the value existing in the application that originally motivated this study. The simulations consider Rayleigh numbers between 10³ and 10⁷, inclination angles between 0º and 180º, and dimensionless cylinder diameters between 0.25 and 1. The effects of dimensionless diameter, Rayleigh numbers, and inclination angles on the mean Nusselt number for the top exposed surface of the cylinder have been studied. Empirical correlations for the heat transfer rates from the top exposed surface of the cylinder have been derived.     

Free Convection in Confined Power-Law Fluids From Two Side-by-Side Cylinders in a Square Enclosure

Laminar free convection heat transfer in power-law fluids from two side-by-side cylinders (one hot and one cold) confined in a square duct has been studied numerically in the two-dimensional flow regime. For a fixed value of the ratio of cylinder radius to size of the enclosure, the effect of geometrical placement of the cylinders is studied on the resulting velocity and temperature fields in the laminar free convection regime by considering six asymmetric locations of the two cylinders. In particular, extensive results reported herein span the range of conditions of Grashof number, 10 to 10⁵; Prandtl number, 0.7 to 100, thereby yielding the range of the Rayleigh number as 7 to 10⁷; power-law index, 0.3 to 1.8; and the relative positions (dimensionless) of the cylinders with respect to the centerline, –0.25 to 0.25. The heat transfer characteristics are analyzed in terms of the local Nusselt number along the surfaces of the two cylinders and the enclosure walls. Overall, the average Nusselt number shows a positive dependence on both the Grashof number and the Prandtl number irrespective of the values of power-law index and relative positioning of the cylinders. Also, all else being equal, shear-thinning fluid behavior promotes heat transfer with reference to that in Newtonian fluids. When the two cylinders are situated close to the bottom wall, the rate of heat transfer is augmented with reference to that for the symmetric positioning of the cylinders along the horizontal mid-plane of the enclosure. Conversely, heat transfer deteriorates as the cylinders are located above the centerline of the enclosure. The present numerical results have been consolidated via the use of a modified Rayleigh number, thereby enabling the estimation of the average Nusselt number in a new application.