Enhanced waveguide bandpass filters using S‐shaped resonators

This article presents a new solution for stopband performance improvement of rectangular waveguide bandpass filters using S‐shaped resonator loaded waveguide configurations at microwave and millimeter‐wave frequencies. The proposed filter structure is compact in size when comparing with the standard E‐plane counterpart. Compactness is achieved by taking advantage of the properties of slow wave effect in half wavelength resonators. Periodicity is readily imposed upon cascading the S‐shaped resonators within the rectangular waveguide. The structure is simple and compatible with E‐plane technology. This type of bandpass filters can be easily realized with a single metallo‐dielectric insert within a standard rectangular waveguide. Simulation and experimental results are presented to validate the argument along with some design guidelines. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE 2009.     

Robust nonlinear sampled‐data system analysis based on Fridman's method and S‐procedure

This paper is devoted to the evaluation of sampling interval providing robust exponential stability of nonlinear system with sector‐bounded nonlinearities. It extends our previous results (R. E. Seifullaev, A. L. Fradkov. Sampled‐data control of nonlinear oscillations based on LMIs and Fridman's method. In 5th IFAC International Workshop on Periodic Control Systems, 95‐100. Caen, France. 2013). The proposed approach exploits E. Fridman's method for linear systems based on a general time‐dependent Lyapunov–Krasovskii functional. With classical results of V. A. Yakubovich about S‐procedure, the problem is reduced to feasibility analysis of linear matrix inequalities. The results are illustrated by example: the pendulum system with friction and sector‐bounded multiple nonlinearities. Copyright © 2015 John Wiley & Sons, Ltd.     

High efficient method for calculating S‐parameters of microwave filter from coupling matrix

In this article, a high‐efficient approach is presented for obtaining S‐parameters from coupling matrix of a microwave filter whether it is lossless or lossy (assuming all the resonators with the same unloaded Q). Computing time is usually large because inversion matrix needs to be carried out once at each frequency in traditional method. By making the application of matrix inversion Lemma and eigenvalue decomposition theory, the matrix inversion operation is replaced by one‐time matrix eigenvalue decomposition in the whole process, no matter how many frequency we need to concern. After reorganizing the equations of the S‐parameters, the time complexity is decreased from O( N ³ ) to O( N ). An example of 14th cavity cross‐coupled filter is reported for illustrating the capabilities of the new proposed approach. Compared with the general method, the time spending on computing was shortened by 70% with our new approach. Therefore, the proposed approach will be very popular and suitable in the industry.     

S‐shaped planar antenna with 45° tilted bidirectional radiation pattern for motorcycle helmets

An S‐shaped planar antenna (SPA) with a bidirectional radiation pattern and beam tilt characteristic is proposed to achieve maximum communication distance for helmet applications. The proposed SPA is comprised of an S‐shaped radiation strip (consisting of a microstrip meander line and two main arms with two inverted L‐shaped parasitic elements) and a rectangular ground plane, where a simplified microstrip power divider is introduced by modifying the feed structure in the center of the SPA, such that the S‐shaped radiation strip works in the second resonant mode. The proposed SPA generates a tilted beam in the E‐plane with an angle of 45°, which is attributed to the obliquely staggered arms of the antenna at a distance. By introducing inverted L‐shaped parasitic elements at the end of the two arms, the directivity of the bidirectional radiation pattern can be further improved, thereby increasing the antenna gain. The working principle is analyzed theoretically, and the effects of the antenna structural parameters on the radiation pattern are also analyzed. The experimental results indicate that the 3:1 VSWR impedance bandwidth is 120 MHz, with a realized peak gain of 1.5 dBi at 2.45 GHz. The proposed antenna is designed for real‐world applications, allowing the antenna to be obliquely installed while keeping the peak gain direction horizontal for maximum communication distance.     

Circularly polarized stacked patch antenna array with enhanced bandwidth for S‐band applications

In this article, a circularly polarized coupled slot 1 × 4 stacked patch antenna array with enhanced bandwidth is proposed for S‐band applications. Initially, a patch antenna radiating at 2.79 GHz is designed and maximum energy from feedline to patch element is coupled using two rectangular slots. Whereas, a parallel feedline structure is designed to provide polarization flexibility by creating 0, 90 , and 180^o phase differences. Then, a truncated patch element is vertically stacked in the design to achieve broader bandwidth of 600 MHz over frequency range from 2.4 to 3.0 GHz. Finally, a coupled slot 1 × 4 array stacked antenna array having feedline line structure to provide 90^o phase difference for circular polarization is designed and fabricated for measurements. It is observed that the final design achieved target specification having impedance matching (|S₁₁ | (dB) < ?10 dB over 2.4 to 3.0 GHz, broad band circular polarization, and 11.5 dBic total gain. Overall, a good agreement between simulated and measurement results is observed.     

Effect of h‐BN nanoceramic substrate on the performance of microstrip patch antenna in S‐band applications

The modern portable communication devices demand compact antenna with superior performance and reduced size and weight. The design and development of such antennas for broadband applications is a challenge for the researchers. In this paper, a microstrip patch antenna with h BN nanoceramic‐based substrate for S‐band application has been proposed and analyzed its performance experimentally. The proposed antenna has been fabricated using powder metallurgy and etching process. The performance of the fabricated antenna has been analyzed in terms of its characteristics such as return loss, gain, and radiation efficiency. Return loss of the proposed antenna is obtained as ?43 dB at resonance frequency. Proposed antenna using h‐BN nanoceramic substrate achieves peak gain of 8 dB and acceptable radiation efficiency in S‐band.     

Performance evaluation of multi‐primary color‐matrix layouts for mobile displays

Abstract— Different subpixel layouts for multi‐primary displays will be presented and their spatial performance analyzed. The layouts studied include red, green, blue, yellow, and cyan subpixels, arranged in 5/5, 5/4, and 5/3 configurations. In the 5/5 configuration, five primaries are arranged on five subpixels forming a square pixel. In the 5/4 configuration, five primaries are arranged on two square units, each of which have four subpixels so that the cyan and yellow subpixels are missing in alternate pixels. In the 5/3 layout, the multi‐primary color matrix is placed on top of a standard RGB TFT backplane with a subpixel aspect ratio of 1:3, resulting in an increased period of the full color sequence. Different data‐rendering methods for the modified color sequences were studied and their implication on the spatial performance were analyzed, given in terms of reproduction accuracy, i.e., the average S‐CIELAB error between data reproduced on a reference display and that reproduced on the examined layout. The reproduction error as a function of the angular substance of a pixel is reported for different layouts and rendering methods and are compared to that of an RGB display. It will be shown that the modified multi‐primary layouts reduce power consumption and provide good image quality for mobile applications.     

New era for TFT‐LCD size and viewing‐angle performance

Abstract— Samsung has announced the development of a full‐high‐definition (1920 × 1080) 82‐in. TFT‐LCD panel using Super‐PVA (S‐PVA) technology, the world's largest TFT‐LCD. In addition to the size breakthrough, this product achieves 600 nits of brightness, a contrast ratio of over 1200:1, an angle of view of 180°, a color gamut of 92%, and an 8‐msec response time. Several key enabling technologies were developed to achieve these specifications, including two‐transistor direct‐driven independently controlled S‐PVA subpixels, non‐even‐area‐ratio subpixels for optimal off‐axis gamma, gate overlap driving for larger driving margin, new CCFL technology for higher color gamut, and advanced fabrication techniques including the use of Samsung's new Gen 7 line. Many of these technologies will be applied to other products within Samsung's LCD‐TV product line. Samsung's broader development efforts toward the overall LCD‐TV market, including production status of the Gen 7 facility, will be updated.     

Eu2+‐doped barium thioaluminate EL devices prepared by two‐target pulsed‐electron‐beam evaporation

Abstract— New blue‐emitting thin‐film‐electroluminescent (TFEL) devices that satisfy the requirements for full‐color TFEL displays were developed. Eu²⁺‐doped BaAl²S⁴ thin films were used for the emission layer. BaAl²S⁴:Eu thin films were prepared by two‐target pulsed‐electron‐beam evaporation suitable for the deposition of multinary compounds that have difficulty in obtaining stoichiometoric thin films. The EL spectrum only had a peak at around 470 nm. The Commission Interantionale de l'Eclairge (CIE) color coordinates were x = 0.12 and y = 0.10. The luminance level from a 50‐Hz pulses voltage was 65 cd/m².     

Input‐to‐state‐stability‐type comparison principles and input‐to‐state stability for discrete‐time dynamical networks with time delays

This paper investigates the input‐to‐state stability (ISS) issue for discrete‐time dynamical networks (DDNs) with time delays. Firstly, a general comparison principle for solutions of DDNs is proposed. Then, based on this general comparison principle, three kinds of ISS‐type comparison principles for DDNs are established, including the comparison principle for input‐to‐state ‐stability, ISS, and exponential ISS. The ISS‐type comparison principles are then used to investigate stability properties related to ISS for three kinds (linear, affine, and nonlinear) of DDNs. It shows that the ISS property of a DDN can be derived by comparing it with a linear or lower‐dimension DDN with known ISS property. By using methods such as variation of parameters, uniform M‐matrix, and the ISS‐type comparison principle, conditions of global exponential ISS for time‐varying linear DDNs with time delays are derived. Moreover, the obtained ISS results for DDNs are extended to the hybrid DDNs with time delays. As one application, the synchronization within an error bound in the sense of ISS is achieved for DDNs with coupling time delays and external disturbances. Finally, two examples are given to illustrate the results. Copyright © 2011 John Wiley & Sons, Ltd.     

Poly‐quadratic stability of discrete‐time nonlinear systems in Takagi‐Sugeno's form

This paper studies poly‐quadratic stability of nonlinear systems represented by a Takagi‐Sugeno (T‐S) discrete fuzzy model. A system is poly‐quadratically stable when its stability can be verified by a parameter dependent Lyapunov function. There are already some results in this area. This paper, however, presents less conservative results by adopting more slack‐matrix‐variables in the linear matrix inequalities (LMIs). The parallel distributed compensation (PDC) law is utilized in both the analysis and the synthesis problems. The effectiveness of the new results in this paper is validated by a simulation example. Copyright © 2009 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

NON‐PDC Observer‐Based T‐S Fuzzy Tracking Controller Design and its Application in CHAOS Control

In many mechanical devices with chaotic behavior, stabilizing unstable periodic orbits (UPOs) of the system has positive effects in the lifetime and effectiveness of these devices. In this study, a new non‐parallel distributed compensation (non‐PDC) observer‐based tracking controller is presented for Takagi–Sugeno fuzzy systems to control the chaotic behavior of such systems. Asymptotic stability synthesis of the closed‐loop system is investigated using a fuzzy Lyapunov function to derive less conservative conditions than common quadratic Lyapunov function‐based approaches. To tackle the main drawback of the fuzzy Lyapunov‐based approaches, which assume some upper bounds on the derivatives of the fuzzy grade functions, we propose a new procedure by considering a constraint on the control signal. The new design conditions are given in the form of linear matrix inequalities (LMIs). The proposed control structure is applied to spinning disks in which chaos phenomena appear in lateral vibration. Simulation results are given to show the applicability of the proposed tracker to the UPO problem.     

S‐H OWA Operators with Moment Measure

Step‐like or Hurwicz‐like ordered weighted averaging (OWA) (S‐H OWA) operators connect two fundamental OWA operators, step OWA operators and Hurwicz OWA operators. S‐H OWA operators also generalize them and some other well‐know OWA operators such as median and centered OWA operators. Generally, there are two types of determination methods for S‐H OWA operators: One is from the motivation of some existed mathematical results; the other is by a set of “nonstrict” definitions and often via some intermediate elements. For the second type, in this study we define two sets of strict definitions for Hurwitz/step degree, which are more effective and necessary for theoretical studies and practical usages. Both sets of definitions are useful in different situations. In addition, they are based on the same concept moment of OWA operators proposed in this study, and therefore they become identical in limit forms. However, the Hurwicz/step degree (HD/SD) puts more concerns on its numerical measure and physical meaning, whereas the relative Hurwicz/step degree (rHD/rSD), still being accurate numerically, sometimes is more reasonable intuitively and has larger potential in further studies and practical applications.     

Improved adaptive fault‐tolerant control design for hypersonic vehicle based on interval type‐2 T‐S model

This study proposes an improved adaptive fault estimation and accommodation algorithm for a hypersonic flight vehicle that uses an interval type‐2 Takagi‐Sugeno fuzzy model and a quantum switching module. First, an interval type‐2 Takagi‐Sugeno fuzzy model for the hypersonic flight vehicle system with elevator faults is developed to process the nonlinearity and parameter uncertainties. An improved adaptive fault estimation algorithm is then constructed by adding an adjustable parameter. The quantum switching module is also applied to the estimation part to select an appropriate algorithm in different fault cases. The estimation results from the given fuzzy observer are used to design a type‐2 fuzzy fault accommodation controller to stabilize the fuzzy system. The stability of the proposed scheme is analyzed using the Lyapunov stability theory. Finally, the validity and availability of the method are verified by a series of comparisons on numerical simulation results.     

Controling color of liquid‐crystal displays

Abstract— Two newly derived characterization models for a liquid‐crystal (LC) display have been tested for five LC‐based displays. Data measured from a series of test colors indicated that all LC‐based displays showed similar characteristics, including an S‐shaped tone curve and poor channel chromaticity constancy. Because they include a hyperbolic function in their definition, the models do not have analytical inverses, and so iterative mathematical techniques are applied. It was shown that a new characterization model based on a hyperbolic function fits the tone curve very accurately with only four coefficients per channel for any type of LCD. In addition, it was also shown that the first derivative of the function provides a means of accurate correction of the chromaticity variation.     

Reduction of defects and improvement in the performance of blue phosphor for thick‐dielectric electroluminescent displays using Color‐by‐Blue

Abstract— Defect‐free large‐area inorganic thick‐dielectric EL (TDEL) displays using Color by Blue (CBB) technology have been successfully developed. We have achieved the world's highest blue‐phosphor luminance of 900 cd/m² for a single‐pixel device by using CBB and by optimizing the e‐beam gun configuration and the flow rate of H₂S in the vacuum chamber. By analyzing the defects on panels with triple‐pattern phosphors and CBB panels, we also found that the number of defects on CBB panels can be drastically reduced compared with those on triple‐pattern panels. The defect‐free 17‐in. VGA CBB panels show better characteristics, a high peak luminance of 600 cd/m² and a high contrast ratio of 1000:1, compared with those of triple‐pattern panels.     

Inorganic EL devices with high‐performance blue phosphor and application to 34‐in. flat‐panel televisions

Abstract— A high‐performance inorganic electroluminescence (EL) device has been successfully developed by using an EL structure with a thick dielectric layer (TDEL) and sputtered BaAl₂S₄:Eu blue phosphor. The luminance and efficacy were higher than 2300 cd/m² and 2.5 lm/W at L⁶⁰, 120 Hz, respectively. Furthermore, the luminance at L⁶⁰, 1.2 kHz was more than 23,000 cd/m². The phosphor layer has a single‐phase and a highly oriented crystalline structure. The phosphor also shows high stability in air. A 34‐in. high‐definition television (HDTV) has been developed by combining a TDEL structure and color‐conversion materials. The panels with an optimized color filter demonstrated a peak luminance of 350 cd/m², a color gamut of more than 100% NTSC, and a wide viewing angle similar to that of plasma‐display panels. The high reproducibility of the 34‐in. panels using our pilot line has been confirmed.     

Dynamic Output‐Feedback Control for T‐S Fuzzy Systems with Input Time‐Varying Delay

This paper considers the problem of the control for T‐S fuzzy systems with input time‐varying delay via dynamic output feedback. Firstly, by applying the reciprocally convex approach, new delay‐dependent sufficient condition for performance analysis is obtained. Then, a less conservative condition for the existence of the controllers is given in terms of linear matrix inequalities (LMIs). Moreover, in the considered system, the time‐delay term is included in the measured output. This results in the difficulty in designing the controllers being increased and the obtained results being applied to a wider class of fuzzy systems than the most existing ones. The main contribution of this work lies in the application of the reciprocally convex inequality and the time‐delay term included in the measured output. Finally, the advantages and effectiveness of the present results are shown by several numerical examples.     

Reliable control design for composite‐driven scheme based on delay networked T‐S fuzzy system

This paper is focused on reliable controller design for a composite‐driven scheme of networked control systems via Takagi‐Sugeno fuzzy model with probabilistic actuator fault under time‐varying delay. The proposed scheme is distinguished from the other schemes as mentioned in this paper. Aims of this article are to solve the control problem by considering the H_∞, dissipative, and L₂?L_∞ constraints in a unified way. Firstly, to improve the efficient utilization of bandwidth, the adaptive composite‐driven scheme is introduced. In such a scenario, the channel transmission mechanism can be adjusted between adaptive event‐triggered generator scheme and time‐driven scheme. In this study, the threshold is dependent on a new adaptive law, which can be obtained online rather than a predefined constant. With a constant threshold, it is difficult to get the variation of the system. Secondly, a novel fuzzy Lyapunov‐Krasovskii functional is constructed to design the fuzzy controller, and delay‐dependent conditions for stability and performance analysis of the control system are obtained. Then, LMI‐based conditions for the existence of the desired fuzzy controller are presented. Finally, an inverted pendulum that is controlled through the channel is provided to illustrate the effectiveness of the proposed method.