3D Nitrogen‐Anion‐Decorated Nickel Sulfides for Highly Efficient Overall Water Splitting

Developing non‐noble‐metal electrocatalysts with high activity and low cost for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of paramount importance for improving the generation of H₂ fuel by electrocatalytic water‐splitting. This study puts forward a new N‐anion‐decorated Ni₃S₂ material synthesized by a simple one‐step calcination route, acting as a superior bifunctional electrocatalyst for the OER/HER for the first time. The introduction of N anions significantly modifies the morphology and electronic structure of Ni₃S₂, bringing high surface active sites exposure, enhanced electrical conductivity, optimal HER Gibbs free‐energy (ΔG_H*), and water adsorption energy change (ΔG_H2O*). Remarkably, the obtained N‐Ni₃S₂/NF 3D electrode exhibits extremely low overpotentials of 330 and 110 mV to reach a current density of 100 and 10 mA cm^?2 for the OER and HER in 1.0 m KOH, respectively. Moreover, an overall water‐splitting device comprising this electrode delivers a current density of 10 mA cm^?2 at a very low cell voltage of 1.48 V. Our finding introduces a new way to design advanced bifunctional catalysts for water splitting.     

Graphdiyne‐Supported NiCo2S4 Nanowires: A Highly Active and Stable 3D Bifunctional Electrode Material

The oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting are major energy and chemical conversion efforts. Progress in electrocatalytic reactions have shown that the future is limitless in many fields. However, it is urgent to develop efficient electrocatalysts. Here, the first graphdiyne‐supported efficient and bifunctional electrocatalyst is reported using 3D graphdiyne foam as scaffolds, and NiCo₂S₄ nanowires as building blocks (NiCo₂S₄ NW/GDF). NiCo₂S₄ NW/GDF exhibits outstanding catalytic activity and stability toward both OER and HER, as well as overall water splitting in alkaline media. Remarkably, it enables a high‐performance alkaline water electrolyzer with 10 and 20 mA cm^?2 at very low cell voltages of 1.53 and 1.56 V, respectively, and remarkable stability over 140 h of continuous electrolysis operation at 20 mA cm^?2. The results indicate that this catalyst has a bifunction that overcomes all reported bifunctional, nonprecious‐metal‐based ones.     

Iridium‐Based Multimetallic Porous Hollow Nanocrystals for Efficient Overall‐Water‐Splitting Catalysis

The development of active and durable bifunctional electrocatalysts for overall water splitting is mandatory for renewable energy conversion. This study reports a general method for controllable synthesis of a class of IrM (M = Co, Ni, CoNi) multimetallic porous hollow nanocrystals (PHNCs), through etching Ir‐based, multimetallic, solid nanocrystals using Fe³⁺ ions, as catalysts for boosting overall water splitting. The Ir‐based multimetallic PHNCs show transition‐metal‐dependent bifunctional electrocatalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic electrolyte, with IrCo and IrCoNi PHNCs being the best for HER and OER, respectively. First‐principles calculations reveal a ligand effect, induced by alloying Ir with 3d transition metals, can weaken the adsorption energy of oxygen intermediates, which is the key to realizing much‐enhanced OER activity. The IrCoNi PHNCs are highly efficient in overall‐water‐splitting catalysis by showing a low cell voltage of only 1.56 V at a current density of 2 mA cm^?2, and only 8 mV of polarization‐curve shift after a 1000‐cycle durability test in 0.5 m H₂SO₄ solution. This work highlights a potentially powerful strategy toward the general synthesis of novel, multimetallic, PHNCs as highly active and durable bifunctional electrocatalysts for high‐performance electrochemical overall‐water‐splitting devices.     

Zirconium‐Regulation‐Induced Bifunctionality in 3D Cobalt–Iron Oxide Nanosheets for Overall Water Splitting

The design of high‐efficiency non‐noble bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is paramount for water splitting technologies and associated renewable energy systems. Spinel‐structured oxides with rich redox properties can serve as alternative low‐cost OER electrocatalysts but with poor HER performance. Here, zirconium regulation in 3D CoFe₂O₄ (CoFeZr oxides) nanosheets on nickel foam, as a novel strategy inducing bifunctionality toward OER and HER for overall water splitting, is reported. It is found that the incorporation of Zr into CoFe₂O₄ can tune the nanosheet morphology and electronic structure around the Co and Fe sites for optimizing adsorption energies, thus effectively enhancing the intrinsic activity of active sites. The as‐synthesized 3D CoFeZr oxide nanosheet exhibits high OER activity with small overpotential, low Tafel slope, and good stability. Moreover, it shows unprecedented HER activity with a small overpotential of 104 mV at 10 mA cm^?2 in alkaline media, which is better than ever reported counterparts. When employing the CoFeZr oxides nanosheets as both anode and cathode catalysts for overall water splitting, a current density of 10 mA cm^?2 is achieved at the cell voltage of 1.63 V in 1.0 m KOH.     

Construction of Defect‐Rich Ni‐Fe‐Doped K0.23MnO2 Cubic Nanoflowers via Etching Prussian Blue Analogue for Efficient Overall Water Splitting

Designing elaborate nanostructures and engineering defects have been promising approaches to fabricate cost‐efficient electrocatalysts toward overall water splitting. In this work, a controllable Prussian‐blue‐analogue‐sacrificed strategy followed by an annealing process to harvest defect‐rich Ni‐Fe‐doped K_0.23MnO₂ cubic nanoflowers (Ni‐Fe‐K_0.23MnO₂ CNFs‐300) as highly active bifunctional catalysts for oxygen and hydrogen evolution reactions (OER and HER) is reported. Benefiting from many merits, including unique morphology, abundant defects, and doping effect, Ni‐Fe‐K_0.23MnO₂ CNFs‐300 shows the best electrocatalytic performances among currently reported Mn oxide‐based electrocatalysts. This catalyst affords low overpotentials of 270 (320) mV at 10 (100) mA cm^?2 for OER with a small Tafel slope of 42.3 mV dec^?1, while requiring overpotentials of 116 and 243 mV to attain 10 and 100 mA cm^?2 for HER respectively. Moreover, Ni‐Fe‐K_0.23MnO₂ CNFs‐300 applied to overall water splitting exhibits a low cell voltage of 1.62 V at 10 mA cm^?2 and excellent durability, even superior to the Pt/C||IrO₂ cell at large current density. Density functional theory calculations further confirm that doping Ni and Fe into the crystal lattice of δ‐MnO₂ can not only reinforce the conductivity but also reduces the adsorption free‐energy barriers on the active sites during OER and HER.     

FeS2/CoS2 Interface Nanosheets as Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Electrochemical water splitting to produce hydrogen and oxygen, as an important reaction for renewable energy storage, needs highly efficient and stable catalysts. Herein, FeS₂/CoS₂ interface nanosheets (NSs) as efficient bifunctional electrocatalysts for overall water splitting are reported. The thickness and interface disordered structure with rich defects of FeS₂/CoS₂ NSs are confirmed by atomic force microscopy and high‐resolution transmission electron microscopy. Furthermore, extended X‐ray absorption fine structure spectroscopy clarifies that FeS₂/CoS₂ NSs with sulfur vacancies, which can further increase electrocatalytic performance. Benefiting from the interface nanosheets' structure with abundant defects, the FeS₂/CoS₂ NSs show remarkable hydrogen evolution reaction (HER) performance with a low overpotential of 78.2 mV at 10 mA cm⁻² and a superior stability for 80 h in 1.0 m KOH, and an overpotential of 302 mV at 100 mA cm⁻² for the oxygen evolution reaction (OER). More importantly, the FeS₂/CoS₂ NSs display excellent performance for overall water splitting with a voltage of 1.47 V to achieve current density of 10 mA cm⁻² and maintain the activity for at least 21 h. The present work highlights the importance of engineering interface nanosheets with rich defects based on transition metal dichalcogenides for boosting the HER and OER performance.     

Synergistic Coupling of Ni Nanoparticles with Ni3C Nanosheets for Highly Efficient Overall Water Splitting

Exploring earth‐abundant bifunctional electrocatalysts with high efficiency for water electrolysis is extremely demanding and challenging. Herein, density functional theory (DFT) predictions reveal that coupling Ni with Ni₃C can not only facilitate the oxygen evolution reaction (OER) kinetics, but also optimize the hydrogen adsorption and water adsorption energies. Experimentally, a facile strategy is designed to in situ fabricate Ni₃C nanosheets on carbon cloth (CC), and simultaneously couple with Ni nanoparticles, resulting in the formation of an integrated heterostructure catalyst (Ni–Ni₃C/CC). Benefiting from the superior intrinsic activity as well as the abundant active sites, the Ni–Ni₃C/CC electrode demonstrates excellent bifunctional electrocatalytic activities toward the OER and hydrogen evolution reaction (HER), which are superior to all the documented Ni₃C‐based electrocatalysts in alkaline electrolytes. Specifically, the Ni–Ni₃C/CC catalyst exhibits the low overpotentials of only 299 mV at the current density of 20 mA cm^?2 for the OER and 98 mV at 10 mA cm^?2 for the HER in 1 m KOH. Furthermore, the bifunctional Ni–Ni₃C/CC catalyst can propel water electrolysis with excellent activity and nearly 100% faradic efficiency. This work highlights an easy approach for designing and constructing advanced nickel carbide‐based catalysts with high activity based on the theoretical predictions.     

Constructing Pure Phase Tungsten‐Based Bimetallic Carbide Nanosheet as an Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Carbides are commonly regarded as efficient hydrogen evolution reaction (HER) catalysts, but their poor oxygen evolution reaction (OER) catalytic activities seriously limit their practical application in overall water splitting. Here, vertically aligned porous cobalt tungsten carbide nanosheet embedded in N‐doped carbon matrix (Co₆W₆C@NC) is successfully constructed on flexible carbon cloth (CC) as an efficient bifunctional electrocatalyst for overall water splitting via a facile metal–organic framework (MOF) derived method. The synergistic effect of Co and W atoms effectively tailors the electron state of carbide, optimizing the hydrogen‐binding energy. Thus Co₆W₆C@NC shows an enhanced HER performance with an overpotential of 59 mV at a current density of ?10 mA cm^?2. Besides, Co₆W₆C@NC easily in situ transforms into tungsten actived cobalt oxide/hydroxide during the OER process, serving as OER active species, which provides an excellent OER activity with an overpotential of 286 mV at a current density of ?10 mA cm^?2. The water splitting device, by applying Co₆W₆C@NC as both the cathode and anode, requires a low cell voltage of 1.585 V at 10 mA cm^?2 with the great stability in alkaline solution. This work provides a feasible strategy to fabricate bimetallic carbides and explores their possibility as bifunctional catalysts toward overall water splitting.     

Cation‐Modulated HER and OER Activities of Hierarchical VOOH Hollow Architectures for High‐Efficiency and Stable Overall Water Splitting

Atom‐scale modulation of electronic regulation in nonprecious‐based electrocatalysts is promising for efficient catalytic activities. Here, hierarchically hollow VOOH nanostructures are rationally constructed by partial iron substitution and systematically investigated for electrocatalytic water splitting. Benefiting from the hierarchically stable scaffold configuration, highly electrochemically active surface area, the synergistic effect of the active metal atoms, and optimal adsorption energies, the 3% Fe (mole ratio) substituted electrocatalyst (VOOH‐3Fe) exhibits a low overpotential of 90 and 195 mV at 10 mA cm^?2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media, respectively, superior than the other samples with a different substituted ratio. To the best of current knowledge, 195 mV overpotential at 10 mA cm^?2 is the best value reported for V or Fe (oxy)hydroxide‐based OER catalysts. Moreover, the electrolytic cell employing the VOOH‐3Fe electrode as both the cathode and anode exhibits a cell voltage of 0.30 V at 10 mA cm^?2 with a remarkable stability over 60 h. This work heralds a new pathway to design efficient bifunctional catalysts toward overall water splitting.     

Transition‐Metal‐Doped RuIr Bifunctional Nanocrystals for Overall Water Splitting in Acidic Environments

The establishment of electrocatalysts with bifunctionality for efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in acidic environments is necessary for the development of proton exchange membrane (PEM) water electrolyzers for the production of clean hydrogen fuel. RuIr alloy is considered to be a promising electrocatalyst because of its favorable OER performance and potential for HER. Here, the design of a bifunctional electrocatalyst with greatly boosted water‐splitting performance from doping RuIr alloy nanocrystals with transition metals that modify electronic structure and binding strength of reaction intermediates is reported. Significantly, Co‐RuIr results in small overpotentials of 235 mV for OER and 14 mV for HER (@ 10 mA cm^?2 current density) in 0.1 m HClO₄ media. Therefore a cell voltage of just 1.52 V is needed for overall water splitting to produce hydrogen and oxygen. More importantly, for a series of M‐RuIr (M = Co, Ni, Fe), the catalytic activity dependence at fundamental level on the chemical/valence states is used to establish a novel composition‐activity relationship. This permits new design principles for bifunctional electrocatalysts.     

Non‐3d Metal Modulation of a 2D Ni–Co Heterostructure Array as Multifunctional Electrocatalyst for Portable Overall Water Splitting

Portable water splitting devices driven by rechargeable metal–air batteries or solar cells are promising, however, their scalable usages are still hindered by lack of suitable multifunctional electrocatalysts. Here, a highly efficient multifunctional electrocatalyst is demonstrated, i.e., 2D nanosheet array of Mo‐doped NiCo₂O₄/Co_5.47N heterostructure deposited on nickel foam (Mo‐NiCo₂O₄/Co_5.47N/NF). The successful doping of non‐3d high‐valence metal into a heterostructured nanosheet array, which is directly grown on a conductive substrate endows the resultant catalyst with balanced electronic structure, highly exposed active sites, and binder‐free electrode architecture. As a result, the Mo‐NiCo₂O₄/Co_5.47N/NF exhibits remarkable catalytic activity toward the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), affording high current densities of 50 mA cm^?2 at low overpotentials of 310 mV for OER, and 170 mV for HER, respectively. Moreover, a low voltage of 1.56 V is achieved for the Mo‐NiCo₂O₄/Co_5.47N/NF‐based water splitting cell to reach 10 mA cm^?2. More importantly, a portable overall water splitting device is demonstrated through the integration of a water‐splitting cell and two Zn–air batteries (open‐circuit voltage of 1.43 V), which are all fabricated based on Mo‐NiCo₂O₄/Co_5.47N/NF, demonstrating a low‐cost way to generate fuel energy. This work offers an effective strategy to develop high‐performance metal‐doped heterostructured electrode.     

Exceptional Performance of Hierarchical Ni–Fe (hydr)oxide@NiCu Electrocatalysts for Water Splitting

Developing low‐cost bifunctional electrocatalysts with superior activity for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great importance for the widespread application of the water splitting technique. In this work, using earth‐abundant transition metals (i.e., nickel, iron, and copper), 3D hierarchical nanoarchitectures, consisting of ultrathin Ni–Fe layered‐double‐hydroxide (Ni–Fe LDH) nanosheets or porous Ni–Fe oxides (NiFeO_x) assembled to a metallic NiCu alloy, are delicately constructed. In alkaline solution, the as‐prepared Ni–Fe LDH@NiCu possesses outstanding OER activity, achieving a current density of 10 mA cm^?2 at an overpotential of 218 mV, which is smaller than that of RuO₂ catalyst (249 mV). In contrast, the resulting NiFeO_x@NiCu exhibits better HER activity, yielding a current density of 10 mA cm^?2 at an overpotential of 66 mV, which is slightly higher than that of Pt catalyst (53 mV) but superior to all other transition metal (hydr)oxide‐based electrocatalysts. The remarkable activity of the Ni–Fe LDH@NiCu and NiFeO_x@NiCu is further demonstrated by a 1.5 V solar‐panel‐powered electrolyzer, resulting in current densities of 10 and 50 mA cm^?2 at overpotentials of 293 and 506 mV, respectively. Such performance renders the as‐prepared materials as the best bifunctional electrocatalysts so far.     

Single Ni Atoms and Clusters Embedded in N‐Doped Carbon “Tubes on Fibers” Matrix with Bifunctional Activity for Water Splitting at High Current Densities

Among the bifunctional catalysts for water splitting, recently emerged transition‐metal single‐atom catalysts are theoretically considered to possess high potential, while the experimental activity is not satisfactory yet. Herein, an exceptionally efficient trifunctional metal–nitrogen–carbon (M–N–C) catalyst electrode, composed of a hierarchical carbon matrix embedding isolated nickel atoms with nickel–iron (NiFe) clusters, is presented. 1D microfibers and nanotubes grow sequentially from 2D nanosheets as sacrificial templates via two stages of solution‐ and solid‐phase reactions to form a 1D hierarchy. Exceptionally efficient bifunctional activity with an overpotential of only 13 mV at 10 mA cm^?2 toward hydrogen evolution reaction (HER) and an overpotential of 210 mV at 30 mA cm^?2 toward oxygen evolution reaction (OER) is obtained, surpassing each monofunctional activity ever reported. More importantly, an overpotential of only 126 and 326 mV is required to drive 500 mA cm^?2 toward the HER and OER, respectively. For the first time, industrial‐scale water splitting with two bifunctional catalyst electrodes with a current density of 500 mA cm^?2 at a potential of 1.71 V is demonstrated. Lastly, trifunctional catalytic activity including oxygen reduction reaction is also proven with a half‐wave potential at 0.848 V.     

IrPd Nanoalloy-Structured Bifunctional Electrocatalyst for Efficient and pH-Universal Water Splitting

The lack of high efficiency and pH-universal bifunctional electrocatalysts for water splitting to hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) hinders the large-scale production of green hydrogen. Here, an IrPd electrocatalyst supported on ketjenblack that exhibits outstanding bifunctional performance for both HER and OER at wide pH conditions is presented. The optimized IrPd catalyst exhibits a specific activity of 4.46 and 3.98 A mg_Ir⁻¹ in the overpotential of 100 and 370 mV for HER and OER, respectively, in alkaline conditions. When applied to the anion exchange membrane electrolyzer, the Ir₄₄Pd₅₆/KB catalyst shows a stability of >20 h at a current of 250 mA cm⁻² for water decomposition, indicating promising prospects for practical applications. Beyond offering an advanced electrocatalyst, this work also guides the rational design of desirable bifunctional electrocatalysts for HER and OER by regulating the microenvironments and electronic structures of metal catalytic sites for diverse catalysis.     

Vertical Growth of 2D Amorphous FePO4 Nanosheet on Ni Foam: Outer and Inner Structural Design for Superior Water Splitting

Rational design of highly efficient bifunctional electrocatalysts based on 3D transition‐metal‐based materials for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great importance for sustainable energy conversion processes. Herein, a novel strategy involving outer and inner structural engineering is developed for superior water splitting via in situ vertical growth of 2D amorphous FePO₄ nanosheets on Ni foam (Am FePO₄/NF). Careful experiments and density functional theory calculations show that the inner and outer structural engineering contributing to the synergistic effects of 2D morphology, amorphous structure, conductive substrate, and Ni?Fe mixed phosphate lead to superior electrocatalytic activity toward OER and HER. Furthermore, a two‐electrode electrolyzer assembled using Am FePO₄/NF as an electrocatalyst at both electrodes gives current densities of 10 and 100 mA cm^?2 at potentials of 1.54 and 1.72 V, respectively, which is comparable to the best bifunctional electrocatalyst reported in the literature. The strategies, introduced in the present work, may open new opportunities for the rational design of other 3D transition‐metal‐based electrocatalyst through an outer and inner structural control to strengthen the electrocatalytic performance.     

In Situ Derived CoB Nanoarray: A High‐Efficiency and Durable 3D Bifunctional Electrocatalyst for Overall Alkaline Water Splitting

The development of efficient bifunctional catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of extreme importance for future renewable energy systems. This Communication reports the recent finding that room‐temperature treatment of CoO nanowire array on Ti mesh by NaBH₄ in alkaline media leads to in situ development of Co?B nanoparticles on nanowire surface. The resulting self‐supported Co?B@CoO nanoarray behaves as a 3D bifunctional electrocatalyst with high activity and durability for both HER (<17% current density degradation after 20 h electrolysis) and OER (<14% current density degradation after 20 h electrolysis) with the need of the overpotentials of 102 and 290 mV to drive 50 mA cm^?2 in 1.0 m KOH, respectively. Moreover, its two‐electrode alkaline water electrolyzer also shows remarkably high durability and only demands a cell voltage of 1.67 V to deliver 50 mA cm^?2 water‐splitting current with a current density retention of 81% after 20 h electrolysis. This work provides a promising methodology for the designing and fabricating of metal‐boride based nanoarray as a high‐active water‐splitting catalyst electrode for applications.     

NiO as a Bifunctional Promoter for RuO2 toward Superior Overall Water Splitting

Conventional development of nanomaterials for efficient electrocatalysis is largely based on performance‐oriented trial‐and‐error/iterative approaches, while a rational design approach at the atomic/molecular level is yet to be found. Here, inspired by a fundamental understanding of the mechanism for both oxygen and hydrogen evolution half reactions (OER/HER), a unique strategy is presented to engineer RuO₂ for superior alkaline water electrolysis through coupling with NiO as an efficient bifunctional promoter. Benefitting from desired potential‐induced interfacial synergies, NiO‐derived NiOOH improves the oxygen binding energy of RuO₂ for enhanced OER, and NiO also promotes water dissociation for enhanced HER on RuO₂‐derived Ru. The resulting hybrid material exhibits remarkable bifunctional activities, affording 2.6 times higher OER activity than that of RuO₂ and an HER activity comparable to Pt/C. As a result, the simple system requires only 1.5 V to deliver 10 mA cm^?2 for overall alkaline water splitting, outperforming the benchmark PtC/NF||IrO₂/NF couple with high mass loading. Comprehensive electrochemical investigation reveals the unique and critical role of NiO on the optimized RuO₂/NiO interface for synergistically enhanced activities, which may be extended to broader (electro)catalytic systems.     

Highly Robust Non‐Noble Alkaline Hydrogen‐Evolving Electrocatalyst from Se‐Doped Molybdenum Disulfide Particles on Interwoven CoSe2 Nanowire Arrays

Developing efficient non‐noble and earth‐abundant hydrogen‐evolving electrocatalysts is highly desirable for improving the energy efficiency of water splitting in base. Molybdenum disulfide (MoS₂) is a promising candidate, but its catalytic activity is kinetically retarded in alkaline media due to the unfavorable water adsorption and dissociation feature. A heterogeneous electrocatalyst is reported that is constructed by selenium‐doped MoS₂ (Se‐MoS₂) particles on 3D interwoven cobalt diselenide (CoSe₂) nanowire arrays that drives the hydrogen evolution reaction (HER) with fast reaction kinetics in base. The resultant Se‐MoS₂/CoSe₂ hybrid exhibits an outstanding catalytic HER performance with extremely low overpotentials of 30 and 93 mV at 10 and 100 mA cm^–2 in base, respectively, which outperforms most of the inexpensive alkaline HER catalysts, and is among the best alkaline catalytic activity reported so far. Moreover, this hybrid catalyst shows exceptional catalytic performance with very low overpotentials of 84 and 95 mV at 10 mA cm^–2 in acidic and neutral electrolytes, respectively, implying robust pH universality of this hybrid catalyst. This work may provide new inspirations for the development of high‐performance MoS₂‐based HER electrocatalysts in unfavorable basic media for promising catalytic applications.     

Accelerated Hydrogen Evolution Kinetics on NiFe‐Layered Double Hydroxide Electrocatalysts by Tailoring Water Dissociation Active Sites

Owing to its earth abundance, low kinetic overpotential, and superior stability, NiFe‐layered double hydroxide (NiFe‐LDH) has emerged as a promising electrocatalyst for catalyzing water splitting, especially oxygen evolution reaction (OER), in alkaline solutions. Unfortunately, as a result of extremely sluggish water dissociation kinetics (Volmer step), hydrogen evolution reaction (HER) activity of the NiFe‐LDH is rather poor in alkaline environment. Here a novel strategy is demonstrated for substantially accelerating the hydrogen evolution kinetics of the NiFe‐LDH by partially substituting Fe atoms with Ru. In a 1 m KOH solution, the as‐synthesized Ru‐doped NiFe‐LDH nanosheets (NiFeRu‐LDH) exhibit excellent HER performance with an overpotential of 29 mV at 10 mA cm^?2, which is much lower than those of noble metal Pt/C and reported electrocatalysts. Both experimental and theoretical results reveal that the introduction of Ru atoms into NiFe‐LDH can efficiently reduce energy barrier of the Volmer step, eventually accelerating its HER kinetics. Benefitting from its outstanding HER activity and remained excellent OER activity, the NiFeRu‐LDH steadily drives an alkaline electrolyzer with a current density of 10 mA cm^?2 at a cell voltage of 1.52 V, which is much lower than the values for Pt/C–Ir/C couple and state‐of‐the‐art overall water‐splitting electrocatalysts.     

NiSe‐Ni0.85Se Heterostructure Nanoflake Arrays on Carbon Paper as Efficient Electrocatalysts for Overall Water Splitting

Fabricating cost‐effective, bifunctional electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in basic media is critical for renewable energy generation. Here, NiSe/CP, Ni_0.85Se/CP, and NiSe‐Ni_0.85Se/CP heterostructure catalysts with different phase constitutions are successfully prepared through in situ selenylation of a NiO nanoflake array oriented on carbon paper (CP) by tuning the original Ni/Se molar ratio of the raw materials. The relationship between the crystal phase component and electrocatalytic activity is systematically studied. Benefiting from the synergetic effect of the intrinsic metallic state, facile charge transport, abundant catalytic active sites, and multiple electrolyte transmission paths, the optimized NiSe‐Ni_0.85Se/CP exhibits a remarkably higher catalytic activity for both the HER and OER than single‐phase NiSe/CP and Ni_0.85Se/CP. A current density of 10 mA cm⁻² at 1.62 V and a high stability can be obtained by using NiSe‐Ni_0.85Se/CP as both the cathode and anode for overall water splitting under alkaline conditions. Density functional theory calculations confirm that H and OH⁻ can be more easily adsorbed on NiSe‐Ni_0.85Se than on NiSe and Ni_0.85Se. This study paves the way for enhancing the overall water splitting performance of nickel selenides by fabricating heterophase junctions using nickel selenides with different phases.