Thermo-electrokinetic rotating non-Newtonian hybrid nanofluid flow from an accelerating vertical surface

This paper explores the combined effects of Coriolis force and electric force on the rotating boundary layer flow and heat transfer in a viscoplastic hybrid nanofluid from a vertical exponentially accelerated plate. The hybrid nanofluid comprises two different types of metallic nanoparticles, namely silver (Ag) and magnesium oxide (MgO) suspended in an aqueous base fluid. The Casson model is deployed for non-Newtonian effects. An empirical model is implemented to determine the thermal conductivity of the hybrid nanofluid. Rosseland's radiative diffusion flux model is also utilized. An axial electrical field is considered and the Poisson–Boltzmann equation is linearized via the Debye–Hückel approach. The resulting coupled differential equations subject to prescribed boundary conditions are solved with Laplace transforms. Numerical evaluation of solutions is achieved via MATLAB symbolic software. A parametric study of the impact of key parameters on axial velocity, transverse velocity, nanoparticle temperature and Nusselt number is conducted for both the hybrid (Ag–MgO)–water nanofluid and also unitary (Ag)–water nanofluid. With increasing volume fraction of silver nanoparticles, there is a reduction in both axial velocity and temperatures, whereas there is a distinct elevation in transverse velocity for both unitary and hybrid nanofluids. Elevation in the heat absorption parameter strongly decreases axial velocity, whereas it enhances transverse velocity. Increasing the radiation parameter strongly boosts temperatures. Increasing the heat absorption parameter significantly accelerates the transverse flow. Negative values of Helmholtz–Smoluchowski velocity decelerate the axial flow whereas positive values accelerate it; the opposite behavior is observed for transverse velocity. Increasing Taylor number significantly damps both the axial (primary) and transversal (secondary) flow. Increasing thermal Grashof number strongly enhances the axial flow but damps the transverse flow. The unitary nanofluid achieves higher Nusselt numbers than the hybrid nanofluid but these are decreased with greater radiative effect (due to greater heat transport away from the plate surface), Prandtl number and heat absorption. Nusselt number is significantly reduced with greater time progression and values are consistently higher for the unitary nanofluid compared with hybrid nanofluid. The computations provide insight into more complex electrokinetic rheological nanoscale flows of relevance to biomedical rotary electro-osmotic separation devices.     

Thermal radiation and magnetic field effects on squeezing motion analysis for Cu–kerosene and Cu–water nanofluids

This article examines the squeezing motion of Cu–kerosene and Cu–water nanofluids with thermal radiation and magnetic field between two parallel sheets. By appropriate transformation, the governing nonlinear partial differential equations are converted into ordinary differential equations and then solved numerically by the Runge–Kutta technique. The motion characteristics have been examined with graphs by relevant parameters. It is observed that fluid temperature reduces if squeezing parameter, thermal radiation, and Hartmann number increases, but fluid temperature improves if nanoparticle volume fraction, Eckert number, and Prandtl number increases and it is observed that liquid momentum improves if the squeezing parameter increases, but fluid velocity reduces if nanoparticle volume fraction and Hartmann number increases.     

Flow and thermal analysis of Oldroyd 8 constant fluid in a porous channel

The present research is based on the thermal and flow properties of the viscoelastic Oldroyd 8 constant fluid in an upright microchannel. The energy and momentum equations were solved with the support of temperature Jump and velocity slip boundary conditions. To measure the irreversibility rate of the flow system, the acquired results of velocity and thermal equations were used. To crack the current mathematical model problem, the numerical Runge–Kutta–Fehlberg method was used. With the aid of graphs, the effect of physical parameters such as thermal radiation, thermal-dependent heat source, Joule heating, fluid parameters, velocity slip, and temperature Jump parameters on the fluid flow, thermal energy, and system entropy generation was discussed. Fluid parameters have different effects on the velocity profile. The Grashof and Hartmann numbers demonstrate opposite effects on the momentum field. The thermal energy of the system reduces with thermal radiation and temperature Jump factor. The thermal radiation, Hartmann number, and temperature Jump parameters reduce the system's irreversibility rate. With the Brinkman number and temperature Jump parameter, the irreversibility ratio increases.     

Induced magnetic field effect on MHD free convection flow in nonconducting and conducting vertical microchannel walls

The current examination employs a numerical analysis to ascertain the effect of the Eckert number along with the Prandtl number on a magnetohydrodynamic natural convection flow of an incompressible viscous fluid in which it is electrically conducting, passing through a perpendicular microchannel. Conduction along with non-conducting immeasurable perpendicular walls within the existence of temperature and velocity slip at the microchannel is analyzed. The induced magnetic field (IMF) generated by the motion of an electrically conducting fluid in the presence of a transverse magnetic field is considered. The momentum and induction equations are coupled in the presence of an induced magnetic field. A set of similar variables are used to convert the governing set of equations to nonlinear-coupled ordinary differential equations. With the aid of MATLAB in built solver is carried out to get the numerical solutions. The influences of Hartman number, Prandtl number, and Eckert number along with some physical parameters are explained through graphs. The results indicate that increasing the Hartmann and magnetic Prandtl numbers results in a significant decrease in volume flow rate.     

Numerical simulation of the magnetic field and Joule heating effects on force convection flow through parallel-plate microchannel in the presence of viscous dissipation effect

The effects of Joule heating, Hartman, Brinkman, and Reynolds numbers on the flow pattern and thermal characteristics of force convection flow through a parallel-plate microchannel are investigated in various nanoparticles volume fraction. Water–Al₂O₃ is considered as the working nanofluid while taking viscous dissipation effect (VDE) into account. The mid-section of the microchannel is heated with a constant uniform heat flux and influenced by a magnetic field with a uniform strength. The effective thermal conductivity and viscosity of nanofluid are calculated through a new correlation in which the influence of Brownian motion is considered. A control volume finite different scheme, along with the SIMPLE algorithm, is adopted to conduct the numerical analyses and solve the discrete equations. Contour plots of streamlines and isotherms are presented to graphically display the impact of the investigated variables. Furthermore, the values of the Nusselt number for the minimum temperature and maximum velocity are calculated and presented through figures. The results show that all of the Brinkman, Joule, nanofluid concentration, and Hartmann numbers have decreasing effect on the heat transfer. The conclusion is supported by the fact that all the aforementioned factors increase the temperature throughout the flow field. The higher the flow field temperature, the lower the heat transfer from the wall. Higher Brinkman number leads to the friction intensification between flow layers due to considering VDE. It can be said about the Joule heating that, since this term has an inverse relation with the squared velocity, increase in Joule number is followed by a reduction of heat transfer from the walls. Also, an increase in the nanofluid concentration increases the temperature throughout the microchannel leading to heat transfer deterioration.     

Exploration of irreversibility and thermal motion of a nanoliquid with the Newton boundary condition by using the Darcy–Forchheimer rule

This study has been conducted to focus on magnetohydrodynamic flow of a nanoliquid through a microchannel in the presence of a magnetic field. In this article, carbon nanotubes suspended in an aqueous medium were our considered fluid, and we focused on both singlewall and multiwall carbon nanotubes. The numerical calculations have been made via the fourth- and fifth-order Runge–Kutta–Fehlberg method. The flow of the nanoliquid in a microchannel with porosity has been scrutinized with the existence of mutual effects, like, the nanoparticle volume fraction, suction or injection, thermal-dependent heat source, convective boundary conditions, Darcy friction factor, and thermal motion of the nanoparticles. The influence of every major parameter on the profile of momentum, temperature, and entropy generation has been displayed graphically, and we discuss their physical aspects. The numerical outcomes demonstrated that the momentum profile augmented with the buoyancy force, angle of inclination, and Darcy number. Thermal energy was enriched with the heat source parameter, Darcy number, and Hartmann number. The irreversibility rate declined with the volume fraction of nanoparticle and radiation parameter, while it increases with the buoyancy force, Eckert parameter, and Darcy friction factor.     

Natural convection of nanofluids in an enclosure between a circular and a sinusoidal cylinder in the presence of magnetic field

In this study natural convection heat transfer of Cu–water nanofluid in a cold outer circular enclosure containing a hot inner sinusoidal circular cylinder in the presence of horizontal magnetic field is investigated numerically using the Control Volume based Finite Element Method (CVFEM). Both circular enclosure and inner cylinder are maintained at constant temperature. The governing equations of fluid motion and heat transfer in their vorticity stream function form are used to simulate the fluid flow and heat transfer. The effective thermal conductivity and viscosity of nanofluid are calculated using the Maxwell–Garnetts (MG) and Brinkman models, respectively. The calculations were performed for different governing parameters such as the Hartmann number, Rayleigh number, values of the number of undulations of the inner cylinder and nanoparticle volume fraction. The results indicate that in the absence of magnetic field, enhancement ratio decreases as Rayleigh number increases while an opposite trend is observed in the presence of magnetic field. Also it is found that the average Nusselt number is an increasing function of nanoparticle volume fraction, the number of undulations and Rayleigh numbers while it is a decreasing function of Hartmann number.     

Exploration of radiative heat on the Jeffery fluid flow in a microchannel for the impact of suction/injection

The purpose of the present paper is to investigate the flow and heat transfer of thermal radiation on the Jeffery fluid flow within a microchannel for the effects of the superhydrophobic surface (SHS) within suction/injection. The governing differential equations of motion and heat transfer are transformed into nonlinear coupled ordinary differential equations (ODEs) using appropriate similarity transformations. The ODEs are solved along with boundary conditions by adopting Runge–Kutta with shooting technique. Symbolic computational software such as MATLAB, the solver bvp4c syntax examines the behavior of the relevant physical parameters. However, some effective emerging parameters on the flow problem reveal that the microchannel walls within the suction/injection parameter increase the temperature, and the SHS is heated. In contrast, without slip, the opposite behavior is rendered. It is clearly shown that the velocity profile diminishes with increasing the Prandtl number. Furthermore, it is noticed that velocity decreases for increasing values of Hartmann number. Comparison with available results for particular cases is an excellent agreement.     

Physical aspects on unsteady MHD‐free convective stagnation point flow of micropolar fluid over a stretching surface

The unsteady magnetohydrodynamic (MHD) stagnation point flow of micropolar fluid across a vertical stretching surface with second‐order velocity slip is the main concern of the present paper. The influence of electrical energy, temperature‐dependent thermal conductivity, thermal radiation, Joule heating, and heat sink/source is investigated. The basic partial differential equations are changed into ordinary differential equations with the help of appropriate similarity variables and then solved by the fourth‐order Runge‐Kutta–based shooting technique. The impact of physical parameters on the velocity, microrotation, and temperature as well as friction factor, couple stress, and local Nusselt number is thoroughly explained with the support of graphs and tables. The results divulge that the heat source/sink and thermal radiation parameters have a propensity to enhance the fluid temperature. The distribution of velocity is an increasing function of an electric field and unsteadiness parameter. The numerical results are also compared with the results available in the literature.     

H2O based different nanofluids with unsteady condition and an external magnetic field on permeable channel heat transfer

This paper investigates numerically the problem of unsteady magnetohydrodynamic nanofluid flow and heat transfer between parallel plates due to the normal motion of the porous upper plate. The governing equations are solved via the fourth-order Runge-Kutta method. Different kind of nanoparticles is examined. The effects of kind of nanoparticle, nanofluid volume fraction, expansion ratio, Hartmann number, Reynolds number on velocity and temperature profiles are considered. Also effect of different types of nanoparticles is examined. Results indicate that velocity decreases with increase of Hartmann number due to effect of Lorentz forces. Rate of heat transfer increase with increase of nanofluid volume fraction, Hartmann number and Reynolds number but it decreases with increase of expansion ratio. Also it can be found that choosing copper as a nanoparticle leads to highest enhancement.     

Entropy optimized MHD fluid flow over a vertical stretching sheet in presence of radiation

The present article describes the influence of radiation on two-dimensional laminar magnetohydrodynamic fluid flow passing over a convective surface. The behavior of the thermal equation is explored through Joule heating, heat generation/absorption, and viscous dissipation. The aim of this study is to examine the physical behavior of the entropy optimization rate. The Cartesian coordinates system is used to model the flow equations. Using similarity variables, a system of partial differential equations is converted into a system of ordinary differential equations. The problem is solved using HAM. The influence of various pertinent parameters on fluid characteristics is graphically explored. Velocity decreases for an increased amount of magnetic parameter, suction parameter, and velocity slip parameter, while behaves the opposite for Grashof number. Temperature increases for a large amount for Brinkman number, magnetic parameter, and radiation parameter, while decreases for Prandtl number. Entropy generation rate increases for Brinkman number, magnetic parameter, and temperature difference parameter. Bejan number decreases for Brinkman number while behaves the opposite for magnetic parameter and temperature difference parameter. Skin friction decreases for large values of magnetic parameters while behaving the opposite for a large amount of velocity slip parameter. Nusselt number decreases for a large amount of Brinkman number. For a better understanding of the study, comparison between numerical outcomes of entropy generation rate and Bejan number for different values of Prandtl number has been done through tables. Also, numerical outcomes of skin friction and Nusselt number are discussed using pertinent parameters through tables.     

A Numerical Study on the Forced Convection of Laminar Nanofluid in a Microchannel with Both Slip and No-Slip Conditions

This article provides numerically study of the thermal performance of a microchannel, cooled with either pure water or a Cu-water nanofluid, while considering the effects of both slip and no-slip boundary conditions on the flow field and heat transfer. The microchannel is partially heated at a constant temperature and cooled by forced convection of a laminar flow at a relatively lower temperature. The effects of pertinent parameters such as Reynolds number, solid volume fraction, and slip velocity coefficient on the thermal performance of the microchannel are studied. The results of the numerical simulation indicate that the heat transfer rate is significantly affected by the solid volume fraction and slip velocity coefficient at high Reynolds numbers.     

Heat transfer and hydromagnetic electroosmotic Von Kármán swirling flow from a rotating porous disc to a permeable medium with viscous heating and Joule dissipation

Magnetohydrodynamic flow and heat transfer in an ionic viscous fluid in a porous medium induced by a stretching spinning disc and modulated by electroosmosis under an axial magnetic field and radial electrical field is presented in this study. The effects of convective wall boundary conditions, Joule heating and viscous dissipation are incorporated. The governing partial differential conservation equations are transformed into a system of self-similar coupled, nonlinear ordinary differential equations with associated boundary conditions. The Matlab bvp4c solver featuring a shooting technique and the fourth-order Runge–Kutta–Fehlberg method are used to numerically solve the governing dimensionless boundary value problem. Multivariate analysis is also performed to examine the thermal characteristics. An increase in rotation parameter induces a reduction in the radial velocity, whereas it elevates the tangential velocity. Greater electrical field parameter strongly damps the radial velocity whereas it slightly decreases the tangential velocity. Increasing magnetic parameter also damps both the radial and tangential velocities. An increment in electroosmotic parameter substantially decelerates the radial flow but has a weak effect on the tangential velocity field. Increasing permeability parameter (inversely proportional to permeability) markedly damps both radial and tangential velocities. The pressure gradient is initially enhanced near the disk surface but reduced further from the disk surface with increasing magnetic parameter and electrical field parameter, whereas the opposite effect is produced with increasing Joule dissipation. Increasing magnetic and rotational parameters generate a strong heating effect and boost temperature and thermal boundary layer thickness. Nusselt number is boosted with increasing Brinkman number (viscous heating effect) and Reynolds number. The simulations are relevant to electromagnetic coating flows, bioreactors and electrochemical sensing technologies in medicine.     

Investigation of combined heat and mass transfer by Lie group analysis with variable diffusivity taking into account hydrodynamic slip and thermal convective boundary conditions

The present paper investigates heat and mass transfer over a moving porous plate with hydrodynamic slip and thermal convective boundary conditions and concentration dependent diffusivity. The similarity representation of the system of partial differential equations of the problem is obtained through Lie group analysis. The resulting equations are solved numerically by Maple with Runge–Kutta–Fehlberg fourth–fifth order method. A representative set of results for the physical problem is displayed to illustrate the influence of parameters (velocity slip parameter, convective heat transfer parameter, concentration diffusivity parameter, Prandtl number and Schmidt number) on the dimensionless axial velocity, temperature and concentration field as well as the wall shear stress, the rate of heat transfer and the rate of mass transfer. The analytical solutions for velocity and temperature are obtained. Very good agreements are found between the analytical and numerical results of the present paper with published results.     

OHAM simulation of 3D transverse magnetic field in rotating flow of Maxwell nanofluid over a stretching sheet with chemical reaction and heat source/sink

In this article, we investigate the heat transfer characteristics of a Maxwell nanofluid along a stretching sheet with transverse magnetic field, considering the presence of heat source/sink and chemical reaction. We consider appropriate similarity transformation for transforming the governing nonlinear equations into nondimensional highly nonlinear coupled ordinary differential equations. The optimal homotopy analysis method is utilized for solving the resultant-coupled equations. The impact of all sundry parameters, like, Deborah number, Prandtl number, magnetic parameter, thermophoresis, rotation parameter, chemical reaction, velocity slip, Schmidt number, Brownian motion parameter, heat sources per sink, Biot number, and Eckert number, on the temperature, velocity, and concentration fields is reported, analyzed, and described through graphs and tables. It is noticed that higher values of magnetic parameter and Deborah number reduce the horizontal velocity field. Furthermore, it is observed that the Biot number and heat source/sink parameter enhance the temperature distribution.     

Magnetic field effects on natural convection around a horizontal circular cylinder inside a square enclosure filled with nanofluid

In this study, natural convection in a concentric annulus between a cold outer square and heated inner circular cylinders in presence of static radial magnetic field is investigated numerically using the lattice Boltzmann method. The inner and outer cylinders are maintained at constant uniform temperatures and it is assumed that all walls are insulating the magnetic field. The numerical investigation is carried out for different governing parameters namely; the Hartmann number, nanoparticles volume fraction and Rayleigh number. The effective thermal conductivity and viscosity of nanofluids are calculated using the Maxwell–Garnetts (MG) and Brinkman models, respectively. Also, the multi-distribution-function (MDF) model is used for simulating the effect of uniform magnetic field. The results reveal that the average Nusselt number is an increasing function of nanoparticle volume fraction as well as the Rayleigh number, while it is a decreasing function of the Hartmann number.     

Radiation and slip effects on MHD point flow of nanofluid towards a stretching sheet with melting heat transfer

In the present paper, the melting heat transfer of a nanofluid over a stretching sheet is investigated. Magnetohydrodynamic stagnation point flow with thermal radiation and slip effects is considered for this study. The governing model of the flow is solved by Runge–Kutta fourth-order method using appropriate similarity transformations. Temperature and velocity fields are presented for various flow pertinent parameters. Nondimensional physical parameters such as Prandtl number, radiation parameter, Brownian motion parameter, Lewis number, thermophoresis parameter, magnetic parameter, and melting parameter on fluid velocity, heat, concentration, skin friction, Sherwood number, and Nusselt number are presented graphically and discussed numerically. Heat transfer rate can be increased by increasing slip, melting, or radiation parameter. Mass transfer increases for greater values of melting parameter or slip parameter while radiation parameter shows the opposite impact on mass transfer.     

Influence of homogeneous‐heterogeneous reactions and induced magnetic field on the nonlinear thermal convective radiative Jeffrey liquid flow with heat source/sink

An analysis has been carried out to investigate the effect of homogeneous‐heterogeneous reactions and induced magnetic field on the unsteady two‐dimensional incompressible nonlinear thermal convective velocity slip flow of a Jeffrey fluid in the presence of nonlinear thermal radiation and heat source/sink. We assumed that the flow is generated due to injection at the lower plate and suction at the upper plate. We obtained a numerical solution for the reduced nonlinear governing system of equations via the shooting technique with fourth‐order Runge‐Kutta integration. We plotted the graphs for various nondimensional parameters, like Deborah number, heat source/sink parameter, nonlinear convection parameter, nonlinear radiation parameter, magnetic Reynolds number, Strommer's number, velocity slip parameter, strengths of homogeneous, heterogeneous reaction parameters and skin friction over the nondimensional flow, temperature, concentration profiles and magnetic diffusivity fields. Also, we calculated the numerical values of boundary properties, such as the skin friction and heat transfer rate. We noticed that the temperature of the fluid is enhanced with the radiation parameter, whereas the concentration decreases with increase of the magnetic Reynolds number. The present results have good agreement with published work for the Newtonian case.     

Heat Transfer Phenomena of Assemblages of Smooth Slip Spheres in Newtonian Fluids

Combined effects of slip velocity and volume fraction of slip spheres on the heat transfer characteristics of multiple slip spheres are numerically investigated within the framework of a free surface cell model combined with a linear slip velocity along the surface of the slip spheres. The governing conservation equations of the mass, momentum, and energy are solved by a segregated approach using a simplified marker and cell algorithm implemented on a staggered grid arrangement in spherical coordinates. The convection and diffusion terms of conservation equations are discretized using quadratic upstream interpolation for convective kinematics and second‐order central differencing schemes, respectively. Prior to obtaining new results, this numerical solver is validated by comparison of present results with the existing literature values. Further new results are obtained for a range of conditions as; Reynolds number, Re: 0.1–200; Prandtl number, Pr: 1–100; volume fraction of slip spheres, Φ: 0.1–0.5 and slip parameter, λ: 0.01–100. The effects of these dimensionless parameters on isotherm contours and local and average Nusselt numbers are thoroughly delineated. Finally, a new empirical correlation for the average Nusselt number of multiple smooth slip spheres is proposed on the basis of present numerical results.     

Influences of Soret and Dufour numbers on mixed convective and chemically reactive Casson fluids flow towards an inclined flat plate

The purpose of this study is to examine the magnetohydrodynamic mixed convection Casson fluid flow over an inclined flat plate along with the heat source/sink. The present flow problem is considered under the assumption of the chemical reaction and thermal radiation impacts along with heat and mass transport. The leading nonlinear partial differential equations of the flow problem were renovated into the nonlinear ordinary differential equations (ODEs) with the assistance of appropriate similarity transformations and then we solved these ODEs with the employment of the bvp4c technique using the computational software MATLAB. The consequences of numerous leading parameters such as thermophoretic parameter, local temperature Grashof number, solutal Grashof number, suction parameter, magnetic field parameter, Prandtl number, chemical reaction parameter, Dufour number, Soret number, angle of inclination, radiation parameter, heat source/sink, and Casson parameter on the fluid velocity, temperature, and concentration profiles are discoursed upon  and presented through different graphs. Some important key findings of the present investigation are that the temperature of the Casson fluid becomes lower for local temperature Grashof number and solutal Grashof number. It is initiated that the Casson fluid parameter increases the velocity of the fluid whereas the opposite effect is noticed in the temperature profile. Higher estimation of Prandtl number and magnetic parameter elevated the Casson fluid concentration. Finally, the skin friction coefficient, Nusselt number, and Sherwood number are calculated and tabulated. It is also examined that the Nusselt number is weakened for both the Dufour number and Soret number but the skin fraction coefficient is greater for both the Dufour number and Soret number.