Engineering Biomimetic Biosensor Using Dual-Targeting Multivalent Aptamer Regulated 3D DNA Walker Enables High-Performance Detection of Heterogeneous Circulating Tumor Cells

The phenotypic heterogeneity of circulating tumor cells (CTCs) and the nonspecific adsorption of background cells impede the effective and sensitive detection of rare CTCs. Although leukocyte membrane coating approach has a good antileukocyte adhesion ability and holds great promise for addressing the challenge of capture purity, its limited specificity and sensitivity prevent its use in the detection of heterogeneous CTCs. To overcome these obstacles, a biomimetic biosensor that integrated dual-targeting multivalent aptamer/walker duplex functionalized biomimetic magnetic beads and an enzyme-powered DNA walker signal amplification strategy is designed. As compared to conventional leukocyte membrane coating, the biomimetic biosensor achieves efficient and high purity enrichment of heterogeneous CTCs with different epithelial cell adhesion molecule (EpCAM) expression while minimizing the interference of leukocytes. Meanwhile, the capture of target cells can trigger the release of walker strands to activate an enzyme-powered DNA walker, resulting in cascade signal amplification and the ultrasensitive and accurate detection of rare heterogeneous CTCs. Importantly, the captured CTCs remained viable and can be recultured in vitro with success. Overall, this work provides a new perspective for the efficient detection of heterogeneous CTCs by biomimetic membrane coating and paves the way for early cancer diagnosis.     

Nanotentacle‐Structured Magnetic Particles for Efficient Capture of Circulating Tumor Cells

Circulating tumor cells (CTCs) have attracted considerable attention as promising markers for diagnosing and monitoring the cancer status. Despite many technological advances in isolating CTCs, the capture efficiency and purity still remain challenges that limit clinical practice. Here, the construction of “nanotentacle”‐structured magnetic particles using M13‐bacteriophage and their application for the efficient capturing of CTCs is demonstrated. The M13‐bacteriophage to magnetic particles followed by modification with PEG is conjugated, and further tethered monoclonal antibodies against the epidermal receptor 2 (HER2). The use of nanotentacle‐structured magnetic particles results in a high capture purity (>45%) and efficiency (>90%), even for a smaller number of cancer cells (≈25 cells) in whole blood. Furthermore, the cancer cells captured are shown to maintain a viability of greater than 84%. The approach can be effectively used for capturing CTCs with high efficiency and purity for the diagnosis and monitoring of cancer status.     

One‐Step Synthesis of Single‐Layer MnO2 Nanosheets with Multi‐Role Sodium Dodecyl Sulfate for High‐Performance Pseudocapacitors

A template‐free, one‐step and one‐phase synthesis of single‐layer MnO₂ nanosheets has been developed via a redox reaction between KMnO₄ and sodium dodecyl sulfate (SDS). The successful formation of single‐layer MnO₂ nanosheets has been confirmed by the characteristic absorption around 374 nm and the typical thickness of ~0.95 nm. The slow redox reaction controlled by the gradual hydrolysis of SDS is found to be the key factor for the successful formation of single‐layer nanosheets. SDS not only serves as the precursor of dodecanol to reduce KMnO₄, but also aids the formation of single‐layer MnO₂ nanosheets as a structure‐inducing agent. The resultant single‐layer MnO₂ nanosheets possess superior specific capacitance, which can be attributed to the extended surface and high porosity of MnO₂ nanosheets on the electrode. The MnO₂ nanosheets also show excellent durability, retaining 91% of the starting capacitance after 10 000 charge/discharge cycles. Moreover, the symmetric pseudocapacitor based on the synthesized single‐layer MnO₂ nanosheets exhibits a high specific capacitance, indicating great potential for real energy storage. Therefore, it has been demonstrated for the first time that a single readily available reagent, SDS, can play multiple roles in reducing KMnO₄ to conveniently yield single‐layer MnO₂ nanosheets as a high‐performance pseudocapacitive material.     

Circulating Tumor Cell Phenotyping via High‐Throughput Acoustic Separation

The study of circulating tumor cells (CTCs) offers pathways to develop new diagnostic and prognostic biomarkers that benefit cancer treatments. In order to fully exploit and interpret the information provided by CTCs, the development of a platform is reported that integrates acoustics and microfluidics to isolate rare CTCs from peripheral blood in high throughput while preserving their structural, biological, and functional integrity. Cancer cells are first isolated from leukocytes with a throughput of 7.5 mL h⁻¹, achieving a recovery rate of at least 86% while maintaining the cells' ability to proliferate. High‐throughput acoustic separation enables statistical analysis of isolated CTCs from prostate cancer patients to be performed to determine their size distribution and phenotypic heterogeneity for a range of biomarkers, including the visualization of CTCs with a loss of expression for the prostate specific membrane antigen. The method also enables the isolation of even rarer, but clinically important, CTC clusters.     

Cancer Cell Membrane Camouflaged Semi‐Yolk@Spiky‐Shell Nanomotor for Enhanced Cell Adhesion and Synergistic Therapy

Cell adhesion of nanosystems is significant for efficient cellular uptake and drug delivery in cancer therapy. Herein, a near‐infrared (NIR) light‐driven biomimetic nanomotor is reported to achieve the improved cell adhesion and cellular uptake for synergistic photothermal and chemotherapy of breast cancer. The nanomotor is composed of carbon@silica (C@SiO₂) with semi‐yolk@spiky‐shell structure, loaded with the anticancer drug doxorubicin (DOX) and camouflaged with MCF‐7 breast cancer cell membrane (i.e., mC@SiO₂@DOX). Such biomimetic mC@SiO₂@DOX nanomotors display efficient self‐thermophoretic propulsion due to a thermal gradient generated by asymmetrically spatial distribution. Moreover, the MCF‐7 cancer cell membrane coating can remarkably reduce the bioadhesion of nanomotors in biological medium and exhibit highly specific self‐recognition of the source cell line. The combination of effective propulsion and homologous targeting dramatically improves cell adhesion and the resultant cellular uptake efficiency in vitro from 26.2% to 67.5%. Therefore, the biomimetic mC@SiO₂@DOX displays excellent synergistic photothermal and chemotherapy with over 91% MCF‐7 cell growth inhibition rate. Such smart design of the fuel‐free, NIR light‐powered biomimetic nanomotor may pave the way for the application of self‐propelled nanomotors in biomedicine.     

Micrometer‐Thick Graphene Oxide–Layered Double Hydroxide Nacre‐Inspired Coatings and Their Properties

Robust, functional, and flame retardant coatings are attractive in various fields such as building construction, food packaging, electronics encapsulation, and so on. Here, strong, colorful, and fire‐retardant micrometer‐thick hybrid coatings are reported, which can be constructed via an enhanced layer‐by‐layer assembly of graphene oxide (GO) nanosheets and layered double hydroxide (LDH) nanoplatelets. The fabricated GO–LDH hybrid coatings show uniform nacre‐like layered structures that endow them good mechanic properties with Young's modulus of ≈18 GPa and hardness of ≈0.68 GPa. In addition, the GO–LDH hybrid coatings exhibit nacre‐like iridescence and attractive flame retardancy as well due to their well‐defined 2D microstructures. This kind of nacre‐inspired GO–LDH hybrid thick coatings will be applied in various fields in future due to their high strength and multifunctionalities.     

Graphene‐Based Linear Tandem Micro‐Supercapacitors with Metal‐Free Current Collectors and High‐Voltage Output

Printable supercapacitors are regarded as a promising class of microscale power source, but are facing challenges derived from conventional sandwich‐like geometry. Herein, the printable fabrication of new‐type planar graphene‐based linear tandem micro‐supercapacitors (LTMSs) on diverse substrates with symmetric and asymmetric configuration, high‐voltage output, tailored capacitance, and outstanding flexibility is demonstrated. The resulting graphene‐based LTMSs consisting of 10 micro‐supercapacitors (MSs) present efficient high‐voltage output of 8.0 V, suggestive of superior uniformity of the entire integrated device. Meanwhile, LTMSs possess remarkable flexibility without obvious capacitance degradation under different bending states. Moreover, areal capacitance of LTMSs can be sufficiently modulated by incorporating polyaniline‐based pseudocapacitive nanosheets into graphene electrodes, showing enhanced capacitance of 7.6 mF cm^?2. To further improve the voltage output and energy density, asymmetric LTMSs are fabricated through controlled printing of linear‐patterned graphene as negative electrodes and MnO₂ nanosheets as positive electrodes. Notably, the asymmetric LTMSs from three serially connected MSs are easily extended to 5.4 V, triple voltage output of the single cell (1.8 V), suggestive of the versatile applicability of this technique. Therefore, this work offers numerous opportunities of graphene and analogous nanosheets for one‐step scalable fabrication of flexible tandem energy storage devices integrating with printed electronics on same substrate.     

A Radial Flow Microfluidic Device for Ultra‐High‐Throughput Affinity‐Based Isolation of Circulating Tumor Cells

Circulating tumor cells (CTCs) are believed to play an important role in metastasis, a process responsible for the majority of cancer‐related deaths. But their rarity in the bloodstream makes microfluidic isolation complex and time‐consuming. Additionally the low processing speeds can be a hindrance to obtaining higher yields of CTCs, limiting their potential use as biomarkers for early diagnosis. Here, a high throughput microfluidic technology, the OncoBean Chip, is reported. It employs radial flow that introduces a varying shear profile across the device, enabling efficient cell capture by affinity at high flow rates. The recovery from whole blood is validated with cancer cell lines H1650 and MCF7, achieving a mean efficiency >80% at a throughput of 10 mL h^?1 in contrast to a flow rate of 1 mL h^?1 standardly reported with other microfluidic devices. Cells are recovered with a viability rate of 93% at these high speeds, increasing the ability to use captured CTCs for downstream analysis. Broad clinical application is demonstrated using comparable flow rates from blood specimens obtained from breast, pancreatic, and lung cancer patients. Comparable CTC numbers are recovered in all the samples at the two flow rates, demonstrating the ability of the technology to perform at high throughputs.     

High Detectivity and Transparent Few‐Layer MoS2/Glassy‐Graphene Heterostructure Photodetectors

Layered van der Waals heterostructures have attracted considerable attention recently, due to their unique properties both inherited from individual two‐dimensional (2D) components and imparted from their interactions. Here, a novel few‐layer MoS₂/glassy‐graphene heterostructure, synthesized by a layer‐by‐layer transfer technique, and its application as transparent photodetectors are reported for the first time. Instead of a traditional Schottky junction, coherent ohmic contact is formed at the interface between the MoS₂ and the glassy‐graphene nanosheets. The device exhibits pronounced wavelength selectivity as illuminated by monochromatic lights. A responsivity of 12.3 mA W^?1 and detectivity of 1.8 × 10¹⁰ Jones are obtained from the photodetector under 532 nm light illumination. Density functional theory calculations reveal the impact of specific carbon atomic arrangement in the glassy‐graphene on the electronic band structure. It is demonstrated that the band alignment of the layered heterostructures can be manipulated by lattice engineering of 2D nanosheets to enhance optoelectronic performance.     

Recent Advances in Microfluidic Platforms Applied in Cancer Metastasis: Circulating Tumor Cells' (CTCs) Isolation and Tumor‐On‐A‐Chip

Cancer remains the leading cause of death worldwide despite the enormous efforts that are made in the development of cancer biology and anticancer therapeutic treatment. Furthermore, recent studies in oncology have focused on the complex cancer metastatic process as metastatic disease contributes to more than 90% of tumor‐related death. In the metastatic process, isolation and analysis of circulating tumor cells (CTCs) play a vital role in diagnosis and prognosis of cancer patients at an early stage. To obtain relevant information on cancer metastasis and progression from CTCs, reliable approaches are required for CTC detection and isolation. Additionally, experimental platforms mimicking the tumor microenvironment in vitro give a better understanding of the metastatic microenvironment and antimetastatic drugs' screening. With the advancement of microfabrication and rapid prototyping, microfluidic techniques are now increasingly being exploited to study cancer metastasis as they allow precise control of fluids in small volume and rapid sample processing at relatively low cost and with high sensitivity. Recent advancements in microfluidic platforms utilized in various methods for CTCs' isolation and tumor models recapitulating the metastatic microenvironment (tumor‐on‐a‐chip) are comprehensively reviewed. Future perspectives on microfluidics for cancer metastasis are proposed.     

A High‐Sensitivity and Low‐Power Theranostic Nanosystem for Cell SERS Imaging and Selectively Photothermal Therapy Using Anti‐EGFR‐Conjugated Reduced Graphene Oxide/Mesoporous Silica/AuNPs Nanosheets

A high‐sensitivity and low‐power theranostic nanosystem that combines with synergistic photothermal therapy and surface‐enhanced Raman scattering (SERS) mapping is constructed by mesoporous silica self‐assembly on the reduced graphene oxide (rGO) nanosheets with nanogap‐aligned gold nanoparticles (AuNPs) encapsulated and arranged inside the nanochannels of the mesoporous silica layer. Rhodamine 6G (R6G) as a Raman reporter is then encapsulated into the nanochannels and anti‐epidermal growth factor receptor (EGFR) is conjugated on the nanocomposite surface, defined as anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, where PEG is polyethylene glycol and CPSS is carbon porous silica nanosheets. SERS spectra results show that rGO@CPSS‐Au‐R6G enhances 5 × 10⁶ magnification of the Raman signals and thus can be applied in the noninvasive cell tracking. Furthermore, it displays high sensitivity (detection limits: 10^?8m R6G solution) due to the “hot spots” effects by the arrangements of AuNPs in the nanochannels of mesoporous silica. The highly selective targeting of overexpressing EGFR lung cancer cells (A549) is observed in the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, in contrast to normal cells (MRC‐5). High photothermal therapy efficiency with a low power density (0.5 W cm^?2) of near‐infrared laser can be achieved because of the synergistic effect by conjugated AuNPs and rGO nanosheets. These results demonstrate that the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G is an excellent new theranostic nanosystem with cell targeting, cell tracking, and photothermal therapy capabilities.     

Polyaniline Derived N‐Doped Carbon‐Coated Cobalt Phosphide Nanoparticles Deposited on N‐Doped Graphene as an Efficient Electrocatalyst for Hydrogen Evolution Reaction

The development of highly efficient and durable non‐noble metal electrocatalysts for the hydrogen evolution reaction (HER) is significant for clean and renewable energy research. This work reports the synthesis of N‐doped graphene nanosheets supported N‐doped carbon coated cobalt phosphide (CoP) nanoparticles via a pyrolysis and a subsequent phosphating process by using polyaniline. The obtained electrocatalyst exhibits excellent electrochemical activity for HER with a small overpotential of ?135 mV at 10 mA cm^?2 and a low Tafel slope of 59.3 mV dec^?1 in 0.5 m H₂SO₄. Additionally, the encapsulation of N‐doped carbon shell prevents CoP nanoparticles from corrosion, exhibiting good stability after 14 h operation. Moreover, the as‐prepared electrocatalyst also shows outstanding activity and stability in basic and neutral electrolytes.     

A Trachea‐Inspired Bifurcated Microfilter Capturing Viable Circulating Tumor Cells via Altered Biophysical Properties as Measured by Atomic Force Microscopy

Circulating tumor cells (CTCs), though exceedingly rare in the blood, are nonetheless becoming increasingly important in cancer diagnostics. Despite this keen interest and the growing number of potential clinical applications, there has been limited success in developing a CTC isolation platform that simultaneously optimizes recovery rates, purity, and cell compatibility. Herein, a novel tracheal carina‐inspired bifurcated (TRAB) microfilter system is reported, which uses an optimal filter gap size satisfying both 100% theoretical recovery rate and purity, as determined by biomechanical analysis and fluid–structure interaction (FSI) simulations. Biomechanical properties are also used to clearly discriminate between cancer cells and leukocytes, whereby cancer cells are selectively bound to melamine microbeads, which increase the size and stiffness of these cells. Nanoindentation experiments are conducted to measure the stiffness of leukocytes as compared to the microbead‐conjugated cancer cells, with these parameters then being used in FSI analyses to optimize the filter gap size. The simulation results show that given a flow rate of 100 μL min^?1, an 8 μm filter gap optimizes the recovery rate and purity. MCF‐7 breast cancer cells with solid microbeads are spiked into 3 mL of whole blood and, by using this flow rate along with the optimized microfilter dimensions, the cell mixture passes through the TRAB filter, which achieves a recovery rate of 93% and purity of 59%. Regarding cell compatibility, it is verified that the isolation procedure does not adversely affect cell viability, thus also confirming that the re‐collected cancer cells can be cultured for up to 8 days. This work demonstrates a CTC isolation technology platform that optimizes high recovery rates and cell purity while also providing a framework for functional cell studies, potentially enabling even more sensitive and specific cancer diagnostics.     

Scalable Design of Two‐Dimensional Oxide Nanosheets for Construction of Ultrathin Multilayer Nanocapacitor

Large size of capacitors is the main hurdle in miniaturization of current electronic devices. Herein, a scalable solution‐based layer‐by‐layer engineering of metallic and high‐κ dielectric nanosheets into multilayer nanosheet capacitors (MNCs) with overall thickness of ≈20 nm is presented. The MNCs are built through neat tiling of 2D metallic Ru_0.95O₂^0.2? and high‐κ dielectric Ca₂NaNb₄O₁₃^? nanosheets via the Langmuir–Blodgett (LB) approach at room temperature which is verified by cross‐sectional high‐resolution transmission electron microscopy (HRTEM). The resultant MNCs demonstrate a high capacitance of 40–52 µF cm^?2 and low leakage currents down to 10^?5–10^?6 A cm^?2. Such MNCs also possess complimentary in situ robust dielectric properties under high‐temperature measurements up to 250 °C. Based on capacitance normalized by the thickness, the developed MNC outperforms state‐of‐the‐art multilayer ceramic capacitors (MLCC, ≈22 µF cm^?2/5 × 10⁴ nm) present in the market. The strategy is effective due to the advantages of facile, economical, and ambient temperature solution assembly.     

Strong Coupling of MoS2 Nanosheets and Nitrogen‐Doped Graphene for High‐Performance Pseudocapacitance Lithium Storage

Layered material MoS₂ is widely applied as a promising anode for lithium‐ion batteries (LIBs). Herein, a scalable and facile dopamine‐assisted hydrothermal technique for the preparation of strongly coupled MoS₂ nanosheets and nitrogen‐doped graphene (MoS₂/N‐G) composite is developed. In this composite, the interconnected MoS₂ nanosheets are well wrapped onto the surface of graphene, forming a unique veil‐like architecture. Experimental results indicate that dopamine plays multiple roles in the synthesis: a binding agent to anchor and uniformly disperse MoS₂ nanosheets, a morphology promoter, and the precursor for in situ nitrogen doping during the self‐polymerization process. Density functional theory calculations further reveal that a strong interaction exists at the interface of MoS₂ nanosheets and nitrogen‐doped graphene, which facilitates the charge transfer in the hybrid system. When used as the anode for LIBs, the resulting MoS₂/N‐G composite electrode exhibits much higher and more stable Li‐ion storage capacity (e.g., 1102 mAh g^?1 at 100 mA g^?1) than that of MoS₂/G electrode without employing the dopamine linker. Significantly, it is also identified that the thin MoS₂ nanosheets display outstanding high‐rate capability due to surface‐dominated pseudocapacitance contribution.     

Air‐Stable Polyphosphazene‐Functionalized Few‐Layer Black Phosphorene for Flame Retardancy of Epoxy Resins

Similar to graphene, few‐layer black phosphorus (BP) features thermal stability, mechanical properties, and characteristic dimension effects, which has potential as a new member of nanofillers for fabricating polymer nanocomposites. Herein, a cross‐linked polyphosphazene‐functionalized BP (BP‐PZN) is developed with abundant –NH₂ groups via a one‐pot polycondensation of 4,4′‐diaminodiphenyl ether and hexachlorocyclotriphosphazene on the surface of BP nanosheets. Whereafter, the resulting BP‐PZN is incorporated into epoxy resin (EP) to study the flame‐retardant property and smoke suppression performance. Cone results show that the introduction of 2 wt% BP‐PZN distinctly improves the flame‐retardant property of EP, for instance, 59.4% decrease in peak heat release rate and 63.6% reduction in total heat release. The diffusion of pyrolysis products from EP during combustion is obviously suppressed after incorporating the BP‐PZN nanosheets. Meanwhile, the EP/BP‐PZN nanocomposites exhibit air stability after exposure to ambient conditions for four months. The air stability of the BP nanosheets in EP matrix is assigned to surface wrapping by PZN and embedded in the polymer matrix as dual protection. As a new member of the 2D nanomaterials, BP nanosheets have potential to be a new choice for fabricating high‐performance nanocomposites.     

Synergistic Effect of Mesoporous Co3O4 Nanowires Confined by N‐Doped Graphene Aerogel for Enhanced Lithium Storage

A one‐step multipurpose strategy is developed to realize a sophisticated design that simultaneously integrates three desirable components of nitrogen dopant, 3D graphene, and 1D mesoporous metal oxide nanowires into one hybrid material. This facile synthetic strategy includes a one‐step hydrothermal reaction followed by topotactic calcination. The utilization of urea as the starting reagent enables the precipitation of precursor nanowires and concurrent doping of nitrogen heteroatoms on graphene during hydrothermal reaction, while at the same time the graphene nanosheets are self‐assembled to afford a 3D scaffold. Detailed characterizations on the final calcined product are conducted to confirm the phase purity, porosity, nitrogen composition, and morphology. The integration of two building blocks, i.e., flexible graphene nanosheets and Co₃O₄ nanowires, enables various intertwining behaviors such as seaming, bridging, hooping, bundling, and sandwiching, of which synergistic effect substantially enhances electrical and electrochemical properties of the resultant hybrid. For lithium ion battery application of the hybrid, a remarkably high capacity more than 1200 mA h g^?1 (at 100 mA g^?1) is stabilized over 100 cycles with coulombic efficiency higher than 97%. Even during rapid discharge/charge processes (1000 mA g^?1), a reversible charge capacity of 812 mA h g^?1 is still retained after 230 cycles.     

Hierarchical Porous Nanosheets Constructed by Graphene‐Coated,Interconnected TiO2 Nanoparticles for Ultrafast Sodium Storage

Sodium‐ion batteries (SIBs) are considered promising next‐generation energy storage devices. However, a lack of appropriate high‐performance anode materials has prevented further improvements. Here, a hierarchical porous hybrid nanosheet composed of interconnected uniform TiO₂ nanoparticles and nitrogen‐doped graphene layer networks (TiO₂@NFG HPHNSs) that are synthesized using dual‐functional C₃N₄ nanosheets as both the self‐sacrificing template and hybrid carbon source is reported. These HPHNSs deliver high reversible capacities of 146 mA h g^?1 at 5 C for 8000 cycles, 129 mA h g^?1 at 10 C for 20 000 cycles, and 116 mA h g^?1 at 20 C for 10 000 cycles, as well as an ultrahigh rate capability up to 60 C with a capacity of 101 mA h g^?1. These results demonstrate the longest cyclabilities and best rate capability ever reported for TiO₂‐based anode materials for SIBs. The unprecedented sodium storage performance of the TiO₂@NFG HPHNSs is due to their unique composition and hierarchical porous 2D structure.     

Vertically Oriented Graphene Nanoribbon Fibers for High‐Volumetric Energy Density All‐Solid‐State Asymmetric Supercapacitors

Graphene fiber based micro‐supercapacitors (GF micro‐SCs) have attracted great attention for their potential applications in portable and wearable electronics. However, due to strong π–π stacking of nanosheets for graphene fibers, the limited ion accessible surface area and slow ion diffusion rate leads to low specific capacitance and poor rate performance. Here, the authors report a strategy for the synthesis of a vertically oriented graphene nanoribbon fiber with highly exposed surface area through confined‐hydrothermal treatment of interconnected graphene oxide nanoribbons and consequent laser irradiation process. As a result, the as‐obtained fiber shows high length specific capacitance of 3.2 mF cm^?1 and volumetric capacitance of 234.8 F cm^?3 at 2 mV s^?1, as well as excellent rate capability and outstanding cycling performance (96% capacitance retention after 10 000 cycles). Moreover, an all‐solid‐state asymmetric supercapacitor based on graphene nanoribbon fiber as negative electrode and MnO₂ coated graphene ribbon fiber as positive electrode, shows high volumetric capacitance and energy density of 12.8 F cm^?3 and 5.7 mWh cm^?3 (normalized to the device volume), respectively, much higher than those of previously reported GF micro‐SCs, as well as a long cycle life with 88% of capacitance retention after 10 000 cycles.     

In Situ Synthesis of MoP Nanoflakes Intercalated N‐Doped Graphene Nanobelts from MoO3–Amine Hybrid for High‐Efficient Hydrogen Evolution Reaction

Molybdenum phosphide (MoP) is a promising non‐noble‐metal electrocatalyst in the hydrogen evolution reaction (HER), but practical implementation is impeded by the sluggish HER kinetics and poor chemical stability. Herein, a novel high‐efficiency HER electrocatalyst comprising MoP nanoflakes intercalated nitrogen‐doped graphene nanobelts (MoP/NG), which are synthesized by one‐step thermal phosphiding organic–inorganic hybrid dodecylamine (DDA) inserted MoO₃ nanobelts, is reported. The intercalated DDA molecules are in situ carbonized into the NG layer and the sandwiched MoO₃ layer is converted into MoP nanoflakes which are intercalated between the NG layers forming the alternatingly stacked MoP/NG hybrid nanobelts. The MoP nanoflakes provide abundant edge sites and the sandwiched MoP/NG hybrid enables rapid ion/electron transport thus yielding excellent electrochemical activity and stability for HER. The MoP/NG shows a low overpotential of 94 mV at 10 mA cm⁻², small Tafel slope of 50.1 mV dec⁻¹, and excellent electrochemical stability with 99.5% retention for over 22 h.