Intraspecific variation in seed morphology of tribe vicieae (Papilionoidae) using scanning electron microscopy techniques

Seed micromorphology of 12 species of tribe Vicieae (Papilionoidae) representing five genera were examined using Scanning Electron Microscope (SEM). The different seed types were described, illustrated, compared, and their taxonomic importance is discussed. Seeds exhibit great diversity in ultrastructure and a variety of novel morphological features have been determined among and within genera of the tribe. Seeds were characterized by oval to round shape, ovate to oblong outline and striate to papillate ornamentation. Radiate and wavy cell pattern has been observed as a characteristic exomorphological feature. In Vicia sativa, testa cells superficially seem to form peltate hairs. As a result, seed micromorphology with few exceptions showed variation and its taxonomic value was significant in distinguishing taxa at species level. The disparity in shape and density of papillae or protuberances and alignment of testa cells, may possibly give further insight at intraspecific level within tribe. The findings also illustrated that the use of SEM in seed morphology can reveal hidden morphological affinities among species and showed potential in delimitation of Vicieae members generally at tribe, genus, and particularly at species level.     

Pollen micromorphological analysis of tribe Acacieae (Mimosaceae) with LM and SEM techniques

The morphology of pollen grains of the 06 species of tribe Acacieae (Mimosaceae) belonging to one genus were investigated using scanning electron microscopic (SEM) and light microscopic (LM) approach. Lactic acid acetolysis method was used for (LM) while non‐acetolysis for (SEM). The species were examined for the both qualitative and quantitative palynological features. Qualitatively the pollen was studied for the shape, exine sculpturing, pollen shape, and pollen type. Oblate spheroidal shape of pollen was observed in Accacia modesta. Subprolate shape in Accaca nilotica. In Accacia farnesiana, prolate pollen was examined while prolate spheroidal in Acacia tortilis and spheroidal pollen grains were studied in Acacia catechu, respectively. Pollen exine sculpturing of the studied tribe possesses novel variation. Foveolate, reticulate, foveolate‐psilate, faint reticulate, fossulate, perforate, and scrabate exine sculpturing were noticed. Colpi were absent in all species. Excessive variation was observed in both qualitative and quantitative character of pollen. SPSS software was use for the quantitative measurement of the pollen grains. The current study will be helpful for the identification of the problematic species and phylogenetic studies of family Mimosaceae.     

Macromorphological and micromorphological seed features of selected taxa of Caesalpiniaceae using light and scanning electron microscopy

Seed micromorphological and macromorphological characteristics of 12 taxa of Caesalpiniaceae from Pakistan have been studied, using light and scanning electron microscopy, to investigate the importance of seed coat features as a taxonomic tool. Great variations have been observed in color, shape, dimension, and seed surface pattern among the different genera of the family. A taxonomic key was prepared for the studied taxa. Six types of seed shapes were observed; circular, elliptical, irregular, oblong, oval, and ovoid. All examined seeds were hard except fragile seeds of Haematoxylom campechianum. Eight types of surface ornamentation have been noticed that include levigate, lugose, papillate, reticulate, reticulate irregular, reticulate regular, rhombus, and rogues. Majority of the taxa has been observed with thick ornamentation wall but thin ornamentation wall has also been recorded in few species. Fracture line of the various patterns was present in all taxa except genus Bauhinia. Three types of texture crudeness; coarse, medium, and fine have been recorded. Both micromorphological and macromorphological characters of seed are very fruitful in identification and classification of Caesalpiniaceae.     

Pollen morphology of subfamily Caryophylloideae (Caryophyllaceae) and its taxonomic significance

The Pollen morphology of subfamily Caryophylloideae (Caryophyllaceae) from different phytogeographical region of Pakistan has been evaluated. In this research, 16 species belong to 6 genera of subfamily Caryophylloideae have been studied using light (LM) and scanning electron microscopy (SEM) for both qualitative and quantitative characters. Different palyno‐morphological features were observed including; pollen ornamentation, pore ornamentation, echini arrangement, echinidensity, number of pori, size of polar and equatorial diameter, P/E ratio, exine thickness, and size of pore were studied. The palyno‐morphological characters of subfamily Caryophylloideae have taxonomically significant in identification and delimitation of species. Two pollen types, i.e., subspheroidal (15 species) and prolate (one species Vaccaria hispanica) were observed. Microechinate‐punctate and microechinate‐perforate pollen ornamentation were examined. Two pollen types of pori, i.e., prominent (5 species) and sunken (11 species) ornamentation have been reported. Three types of echini arrangement have been reported irregular, regular and rather regular, while three type of echinidensity (i.e., medium, dense and sparse) were observed. Pori numbers were found different in different species range from 5 in Silene apetala to 19‐35 in Silene vulgaris. Based on different palyno‐morphological characters, taxonomic key was develop for quick and accurate identification. The quantitative data were processed using SPSS software for average, minimum, maximum, and standard error.     

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 μm while minimum in M. compressa 38.42 and 21.05 μm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus‐indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro‐echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.     

Taxonomic importance of pollen morphology in Veratrum L. (Melanthiaceae) using microscopic techniques

Previous studies reported that intrageneric relationships of genus Veratrum of family Melanthiaceae are controversial and hard to delimit. Therefore, we observed the pollen morphological features of six species in the genus Veratrum in detail using both light microscopy and scanning electron microscopy and investigated their significance for Veratrum taxonomy. Among them, five were studied for the first time. The results demonstrated that pollen grains of Veratrum are medium in size with P/E being 0.31–0.60. Three types of shape in polar view have been observed elliptic, long‐elliptic, or wide‐elliptic with blunt or rounded at both ends. Two types of width of colpus reported narrow or wide, two types of depth of colpus reported deep or flat, and two types of length of colpus reported extend almost or do not extend to the ends, whereas two types of colpus membranes reported absent or obvious. One type of surface ornamentation was noted as reticulate. These results support species Veratrum album and Veratrum lobelianum as well as Veratrum grandiflorum and Veratrum oxysepalum as two independent species, respectively, rather than classifying Veratrum into two sections. Overall, we demonstrated that the ratio of polar axis length to equatorial axial length, pollen characteristics at the polar view, the colpus morphology, and the surface ornamentation of pollen grains of genus Veratrum have important systematic significance in identification and delimitation of species.     

Taxonomic importance of spore morphology in Thelypteridaceae from Northern Pakistan

Spore morphology of Thelypteridaceae species growing in Malakand Division, Northern Pakistan, was studied using both light microscopy and scanning electron microscopy. The taxa are Christella dentata and Glaphyropteridopsis erubescens in the subfamily Thelypteridoideae, and Phegopteris connectilis, Pseudophegopteris pyrrhorhachis, and Pseudophegopteris levingei in the subfamily Phegopteridoideae. The studied species exhibit differences in spore size, exospore thickness, color, and ornamentation. Spores of the studied species are monolete and medium‐sized, and shape is ellipsoidal in both polar and equatorial views. The average measurement of the polar diameter ranges from 27 μm to 31 μm, whereas in the equatorial direction it varied from 20 μm to 40 μm. The exospore thickness ranges from 1.2 μm to 2.4 μm. Reticulate, laevigate with microgranules, cristate, and coarsely echinate surface ornamentation are observed among the species. Multivariate analysis including unweighted pair group method with arithmetic mean and principal component analysis was used for the grouping and discrimination of species and genera.     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.     

Palynological investigation of lactiferous flora (Apocynaceae) of District Rawalpindi,Pakistan, using light and scanning electron microscopy

This was the first comprehensive pollen micromorphological investigation of lactiferous flora (Apocynaceae) of District Rawalpindi, Pakistan. The pollen morphology of 10 species of the family Apocynaceae was observed and documented using light microscopy and scanning electron microscopy. Pollen was found subspheroidal in shape in most of the species, however peroblate shape was noted in Vinca major. Exine sculpturing patterns (psilate, rugulate, scabrate, and microreticulate) were observed. The result indicated that exine ornamentation of Apocynaceae taxa is systematically informative at generic and species levels. Most of the species have tricolporate type pollen but tetraporate pollen was also observed in Trachelospermum jasminoides and tetracolpate in V. major. Minimum equatorial diameter was noted in Carissa edulis (27.13 μm) and maximum in V. major (108.25 μm). Similarly, maximum exine thickness was found in Cascabela thevetia (9.5 μm). In the present findings, the pollen morphological data are compared with available other pollen studies to evaluate the taxonomic value of pollen traits in Apocynaceae taxa by using multiple microscopic techniques. Furthermore, molecular and phylogenetic studies were recommended to strengthen the systematics of Apocynaceae taxa.     

Pollen morphological variation of Berberis L. from Pakistan and its systematic importance

Due to overlapping and diverse morphological characters, Berberis is among the most taxonomically complex genera. Palynology is one of the taxonomic tools for delimitation and identification of complex species. In this study, pollens of 10 Berberis species were analyzed through light and scanning electron microscopy. Qualitative as well as quantitative features (pollen shape, size, presence or absence of colpi, colpi length and width, exine thickness, ornamentation, pollen class, aperture, and polar–equatorial ratio) were measured. Five species were observed to have colpate (pantocolpate) with elongated ends, radially symmetrical, isopolar, monads, and psilate‐regulate pollens. In polar view, six pollen were spheroidal, two were ovoid, one spherical, and one oblate. Similarly, variation in pollen length was prominent and the largest pollen on polar view was recorded for B. psodoumbellata 60–65 μm (62.4 ± 0.9), while the smallest one was observed for B. lycium 29–35 μm (32.2 ± 1). The observed variation in both quantitative and qualitative features were important in taxonomic identification. This shows that palynological characters are helpful in identification of Berberis genus at the species level.     

Taxonomic study of subfamily Nepetoideae (Lamiaceae) by polynomorphological approach

The present study is insight into pollen morphology for characterizing species and their utility in the taxonomic separation of certain taxa of subfamily Nepetoideae (Lamiaceae) from Pakistan. The pollen micromorphology of 11 species of the Nepetoideae was analyzed and documented using light microscopy and scanning electron microscopy (SEM) for both qualitative and quantitative characteristics. Most species have hexazonocolpate pollen grains but trizonocolpate and tetrazonocolpate pollen with circular and oval amb were also rarely observed in Mentha spicata. The basic pollen shape in most of the studied species was subspheroidal but prolate grains were also observed in M. spicata, S. coccinea, and S. plebeia. The exine sculpturing of Nepetoideae pollen was taxonomically very informative particularly at subfamily level. Observations of exine sculpturing with SEM revealed various types of pollen grains: reticulate, bireticulate, microreticulate, perforate, aerolate, and gammate. The bireticulate type further subdivided into three subtypes based on the number of secondary lumina in each primary lumen and is characterized by varying characteristics of the secondary reticulum and primary muri. A significant variation was observed in colpus surface ornamentation. The maximum polar diameter was found in O. americanum (58 ± 5.8 μm) and the maximum equatorial diameter observed in O. basilicum (50.25 ± 1.37 μm). Pollen features of the studied species were discussed and compared based on the current taxonomical concepts. The results showed that pollen traits of the subfamily Nepetoideae was found significant to classify the taxa. Furthermore, pollen features provide additional evidence to distinguish macromorphologically similar taxa from each other.     

Pollen morphology of the genus Sophora (Fabaceae) and its taxonomic implications

The genus Sophora (Fabaceae) is one of the taxonomically challenging genera with high economic and medical values. In this study, the pollen morphology of 43 samples of 27 species, 4 subspecies, and 4 varieties of the genus Sophora and 3 closely related genera was examined using scanning electron microscopy to evaluate the pollen diversity of the genus and its taxonomic significance. Pollen grains of the studied species were tricolporate (rarely six-aperture), and pollen shape varied from suboblate, spheroidal, subprolate to prolate. Echinate external ornamentation was reported for the first time in some species of the genus. Aperture membrane ornamentation and outline in a polar/equatorial view were described for the first time in the genus. Principal component analysis was used to understand the relationship and discrimination between the species and the genera, with six components accounting for 79.92% of the total variance. Taxonomic keys based on pollen morphology were also constructed to easily identify the taxa of the genus through palynological characteristics. Results showed that pollen morphology alone is not sufficient to elucidate or reconstruct taxonomic relationships within the genus Sophora, but palynological assessments can provide some useful information for identifying taxonomically problematic taxa.     

Pollen diversity and its implications to the systematics of mimosaceous species by LM and SEM

In this study we have discussed pollen morphology of 14 mimosaceous species belonging to five genera by using light microscopy (LM) and scanning electron microscopy (SEM). The palynological features of species were determined by both qualitative and quantitative characters. The qualitative characters include pollen shape, colpi arrangement, and exine sculpturing. Oblate spheroidal shaped pollens were noted in Albizia procera, Albizia lebbeck, Acacia tortilis, Acacia ampliceps, and Acacia modesta, subprolate shaped pollen in Leucaena leucocephala, Prosopis julifera, and Acacia nilotica, prolate pollen in Acacia farnesiana and Prosopis glandulosa while spheroidal, sub spheroidal and sub oblate pollen grains were observed in Acacia catechu, Mimosa himalayana, Prosopis cineraria, respectively. Sparsely foveolate, reticulate, scabrate, and scrobiclate exine sculpturing were observed. Colpi with sunken ornamentation were seen in P. cineraria, P. glandulosa, P. juliflora, and L. leucocephala while colpi were absent in rest of the studied species. The quantitative characters were statistically studied using SPSS software. The current study gives important morpho‐palynological characters for identifying and validation of close related and similar taxa which will aid to the phylogenetic analysis of Mimosaceae family.     

Palyno‐anatomical studies of monocot taxa and its taxonomic implications using light and scanning electron microscopy

Palyno‐anatomical study of monocots taxa using Light and Scanning Electron Microscopy (SEM) was first time conducted with a view to evaluating their taxonomic significance. Studied plants were collected from different eco‐climatic zones of Pakistan ranges from tropical, sub‐tropical, and moist habitats. The aim of this study is to use palyno‐anatomical features for the correct identification, systematic comparison, and investigation to elucidate the taxonomic significance of these features, which are useful to taxonomists for identifying monocot taxa. A signification variation was observed in quantitative and qualitative characters by using the standard protocol of light microscopy (LM) and SEM. Epidermal cell length varied from maximum in Allium griffthianum (480 ± 35.9) μm at the adaxial surface to minimum in Canna indica (33.6 ± 8.53) μm on abaxial surface. Maximum exine thickness was observed in Canna indica (4.46) μm and minimum in Allium grifthianum (0.8) μm. Variation was observed in shape and exine ornamentation of the pollen, shape of the epidermal cell, number, size, and type of stomata, guard cell shape, and anticlinal wall pattern. Based on these palyno‐anatomical features a taxonomic key was developed, which help in the discrimination of studied taxa. In conclusion, LM and SEM pollen and epidermal morphology is explanatory, significant, and can be of special interest for the plant taxonomist in the correct identification of monocots taxa.     

Palyno-anatomical characters and their systematic significance in the family Apiaceae from Chitral,eastern Hindu Kush,Pakistan

The present study was performed to provide a detailed explanation of leaf epidermal anatomy and pollen micromorphological features of selected species of family Apiaceae from Chitral, eastern Hindu Kush region as the basis of forthcoming studies. In the present article pollen morphology of eight species and foliar epidermal of seven species of family Apiaceae have been examined through microscopic techniques. In results two types of pollen prolate (five species) and perprolate (three species) with three colpi have been recorded. The exine ornamentation was found to be regulate, striate, and cerebroid. Largest pollen was found in Heracleum leucocarpum with the polar diameter of 43.25 μm and equatorial diameter of 21.6 μm. Smallest pollen was observed in Elaeosticta chitralica with the polar diameter of 18.4 μm. The P/E ratio varied from 1.59 to 2.16. Regarding to foliar epidermal anatomy, three types of epidermal cells including rectangular, irregular, and polygonal with variation in anticlinal wall pattern were determined. In the selected species three kinds of stomata comprising anisocytic, anomocytic, and paracytic type were reported in the current research. The size of epidermal cells ranged from 106 × 42.50 μm in Bupleurum falcatum subsp. cernuum and 77.25 × 26.35 μm in Prangos pabularia in adaxial surface. Largest stomatal complex was found in Prangos pabularia both in adaxial 33.55 × 20.05 μm and abaxial 50.25 × 39.40 μm. All the observed quantitative and qualitative features of the species were proved to be useful in the delimitation of species at generic and species level.     

Palyno-morphological attributes of some selected plant species of family Asteraceae from district Dera Ismail Khan,KPK, Pakistan

The current study aimed to investigate the palyno-morphological features of Asteraceous species from District Dera Ismail Khan, Khyber Pakhtunkhwa, Pakistan. A total of 13 species were collected, pressed, identified, and examined by using light and scanning electron microscopy. Both qualitative and quantitative pollen characters were observed, that is, equatorial and polar diameter, number of pores and colpi, exine thickness, exine sculpturing, pollen shape, and P/E ratio. Pollen shapes observed in studied taxa were spheroidal, suboblate, oblate-spheroidal, and lophate-spheroidal. The aperturation patterns of pollens vary from tricolporate to tetracolporate. The maximum polar and equatorial diameter of 75–100 (87.5 ± 13.6) μm and 87.5–117.5 (102.5 ± 16.4) μm, respectively, was recorded in Echinops echinatus, while minimum polar and equatorial diameter of 20–22.5 (21 ± 1.36) μm and 22.5–25 (23.5 ± 1.36) μm, respectively, was recorded in Aster subulatus. Six types of exine sculpturing patterns were observed; echinate, micro-echinate, echinate-microreticulate, microreticulate, echinate-perforate, and scabrate. Maximum exine thickness of 8.75 μm was recorded in E. echinatus and minimum of 1.25 μm in Launaea mucronata. The pollen morphology has valuable significance in understanding the taxonomy of different plant groups and plays a central role in the correct identification and classification of Asteraceous flora at species, generic, and tribe levels.     

Pappus and fruit micromorphology and fruit anatomy in some members of the tribe Cardueae (Asteraceae) from Turkey with their contributions to systematics

The present investigation aims to determine pappus and fruit characters of 21 taxa representing 12 different genera from Turkey. For this reason, present data of pappus and cypsela characters as well as previous results from 21 additional Cardueae taxa have been comparatively evaluated, and a total of 42 taxa were grouped by using cluster and MDS analysis methods. The cluster analysis resolved two main clusters, with five taxa having scale or coroniform pappus as the first-branching group. Considerable variations were observed in the surface sculpture, and the pericarp and testa anatomical structures as well as the pappus characteristics. On the basis of fruit surface sculpture, four major types and two subtypes of ornamentation patterns were discerned, and based on their anatomies three types of testa epidermal structure were recognized. Our results show that Centaurea s.l. taxa do not exhibit clear distinction from the genus level; in some cases the taxa are separated to some extent, in other cases they are combined with Cyanus and Psephellus taxa. Two Klasea species with sclerenchymatous mesocarp exhibit the closest relationship to Centaurea s.l. taxa. Rhaponticum repens displays the nearest neighborhood with Centaurea s.l. and Klasea taxa. A diagnostic key based on the examined characteristics has been given. The taxonomic importance and systematic implications of the results are discussed in the light of the current framework. The evaluated cypsela and pappus characters are useful not only in assessing relationships within this group but also in delimiting genera and species.     

Seed morphoanatomy of the genus Passiflora L. (Passifloraceae) by scanning electron microscopy and light microscopy

Morphoanatomical analysis of seeds contributes to knowledge of the development of seedlings and identification of species, as well as supporting conservation studies. The conservation of the species belonging to the Passiflora genus is crucial due to of the threats to the genetic resources of these species. Thus, the objective of this study was to morphoanatomically characterize Passiflora seeds, verify possible injuries to the tissues after cryopreservation and thus contribute to the conservation strategies of the species of this genus. Initially, seeds of Passiflora coccinea, P. edulis, P. gibertii, P. maliformis, P. morifolia, P. setacea, P. suberosa, and P. tenuifila collected from the Passion Fruit Active Germplasm Bank of the Embrapa Cassava and Fruits research unit (Embrapa Mandioca e Fruticultura) were analyzed. Then, their length, width and thickness, shape of the base and tip, and ornamentations present on the body and edge of the seeds were evaluated. The seeds of the species were placed in cryotubes and immersed in liquid nitrogen to assess possible cryoinjuries. The tegument and tissues of the seeds were examined by scanning electron microscopy. The seeds had varied biometric data, with average values of 4.63 mm for length, 3.28 mm for width, and 1.51 mm for thickness. Six ornamentation types were observed: reticulate for the species P. coccinea; finely reticulate for P. edulis; foveolate reticulate for P. gibertii and P. setacea; alveolate reticulate for P. maliformis and P. tenuifila; coarsely reticulate for P. morifolia; and falsifoveolate reticulate for P. suberosa. Some seeds suffered tegument cracks due to the freezing in liquid nitrogen, but without physiological damages to the embryo and endosperm. The cryopreservation of the seeds in the presence of the tegument significantly reduced the cryoinjuries caused to the embryo. Cryopreservation can be promising for long-term conservation of passion fruit seeds.