提高学生工程能力评价模式的研究与实践

本文剖析了IT专业中,应用型本科的程序设计基础课程的传统课程评价模式的弊端,构建了有助学生工程能力提高的新型评价模式及其实施策略。并通过"程序设计基础"精品课程的改革与建设实践,阐述该模式对落实IT专业课程教学目标,提高教学质量的有效性与可操作性,且对同类特征的IT专业的课程改革与建设具有借鉴作用。     

The Personal Acoustics Lab (PAL): a microcomputer-based system for digital signal acquisition, analysis, and synthesis

A new, integrated digital signal processing (DSP) system, the Personal Acoustics Lab (PAL), is described. This microcomputer-based system is suitable for analogue signal digitization at rates from several samples per hour to 150,000 samples per second in 12- or 16-bit words. Data may be acquired on one to sixteen single-ended A/D, or one to eight double-ended A/D channels in bipolar or unipolar modes. Digitized data may be reconverted to analogue signals using one or two D/A channels. An external clock and trigger and two bidirectional digital ports are provided. Integrated PAL-ILS software commands perform all necessary DSP functions, including: data editing, time- and frequency-domain graphical display, plotting, filtering, Fourier and Hilbert transforms, linear predictive coding, auto- and cross-correlation, and summary statistics. The system is suitable for biological and engineering DSP applications. Output from selected PAL-ILS software commands is illustrated using a bioacoustical example.     

Design and implementation of a fuzzy expert system for performance assessment of an integrated health, safety, environment (HSE) and ergonomics system: The case of a gas refinery

The objective of this study is to design a fuzzy expert system for performance assessment of health, safety, environment (HSE) and ergonomics system factors in a gas refinery. This will lead to a robust control system for continuous assessment and improvement of HSE and ergonomics performance. The importance of this study stems from the current lack of formal integrated methodologies for interpreting and evaluating performance data for HSE and ergonomics. Three important reasons to use fuzzy expert systems are (1) reduction of human error, (2) creation of expert knowledge and (3) interpretation of large amount of vague data. To achieve the objective of this study, standard indicators and technical tolerances for assessment of HSE and ergonomics factors are identified. Then, data is collected for all indicators and consequently, for each indicator four conditions are defined as “acceptance”, “low deviation”, “mid deviation” and “high deviation”. A membership function is defined for each fuzzy condition (set) because an indicator cannot be allocated to just one of the above conditions. The expert system uses fuzzy rules, which are structured with Data Engine. Previous studies have introduced HSE expert system whereas this study introduces an integrated HSE and ergonomics expert system through fuzzy logic.     

The role of the New Zealand forest industry injury surveillance system in a strategic ergonomics,safety and health research programme

Forestry is among the most hazardous of all industry sectors internationally. In New Zealand, highest work-related morbidity and mortality incidence rates are found in the logging sector. The New Zealand Forest Industry Accident Reporting Scheme (ARS) is a forestry injury surveillance system maintained by the Centre for Human Factors and Ergonomics (COHFE). The paper highlights the pivotal role of an industry-wide injury surveillance system in an industry-specific strategic research programme, giving examples of the use of ARS data in identification of priority areas for ergonomics, safety and health research attention, for safety awareness feedback to the industry, and in the evaluation of injury countermeasures. An analysis of injury patterns and trends for one high-risk forestry operation (skid work) is presented to illustrate both the capabilities and limitations of the ARS in its present stage of development.     

Spectrophotometric sensor system based on a liquid waveguide capillary cell for the determination of titanium: Application to natural waters, sunscreens and a lake sediment

An analytical procedure for the spectrophotometric determination of titanium at trace levels was developed. The procedure involves the use of a multi-pumping flow system (MPFS) coupled with a liquid waveguide capillary cell (LWCC) with 1.0 m path length, 550 μm i.d. and 250 μL internal volume, which enabled to enhance the sensitivity of the determination and thus avoid complex and time-consuming pre-concentration steps. The determination is based on the colorimetric reaction of titanium with chromotropic acid. The limit of detection (3σ) was 0.4 μg/L and a linear response up to 100 μg/L with a sample throughput of 46 h⁻¹, and a low reagent consumption/effluent production was achieved. The developed procedure was applied to natural waters, sunscreen formulations and one certified lake sediment sample.     

Surface deformation time series and source modeling for a volcanic complex system based on satellite wide swath and image mode interferometry: The Lazufre system, central Andes

The variable spatio-temporal scales of Earth's surface deformation in potentially hazardous volcanic areas pose a challenge for observation and assessment. Here we used Envisat data acquired in Wide Swath Mode (WSM) and Image Mode (IM) from ascending and descending geometry, respectively, to study time-dependent ground uplift at the Lazufre volcanic system in Chile and Argentina. A least-squares adjustment was performed on 65 IM interferograms that covered the time period of 2003-2008. We obtained a clear trend of uplift reaching 15-16 cm in this 5-year interval. Using a joint inversion of ascending and descending interferograms, we evaluated the geometry and time-dependent progression of a horizontally extended pressurized source beneath the Lazufre volcanic system. Our results hence indicate that an extended magma body at a depth between 10 and 15 km would account for most of the ground uplift. The maximum inflation reached up to ~ 40 cm during 2003-2008. The lateral propagation velocity of the intrusion was estimated to be nearly constant at 5-10 km/yr during the observation time, which has important implications for the physical understanding of magma intrusion processes.