293.15K到333.15K温度下一些氨基酸及其相应基团水溶液中的偏摩尔体积研究

Abstract Densities of aqueous solutions of eight amino acids, glycine, L-alanine, L-valine, L-isoleucine, L-serine, L-threonine, L-arginine and L-phenylalanine, are measured as a function of amino acid concentration from 293.15 K to 333.15 K. These data are used to calculate the apparent molar volume Vφ^0 and infinite dilution apparent molar volume Vφ^0 (partial molar volume). Data of five amino acids are used to correlate partial molar volume Vφ^0 using group contribution method to estimate the contributions of the zwitterionic end groups (NH ,COO-) and CH2 group, OH group, CNHNHNH2 group and C6H5(phenyl) group of amino acids. The results show that Vφ^0 values for all kinds of groups of amino acids studied increase with increase of temperature except those for CH2^φ group, which are almost constant within the studied temperature range. Data of other amino acids, L-valine, L-isoleucine and L-threonine, are chosen for comparison with the predicted partial molar volume Vφ^0 using the group additivity parameters obtained. The results confirm that this group additivity method has excellent predictive utility.     

308.15 K、313.15 K和318.15K下4-氨基丁酸在硫酸沙丁胺醇水溶液中的体积和黏度研究

Density () and viscosity (η) measurements were carried out for 4-aminobutyric acid in 0.0041, 0.0125 and 0.0207 mol•L－1 aqueous salbutamol sulphate at 308.15, 313.15 and 318.15 K. The measured values of density and viscosity were used to estimate some important parameters such as apparent molar volume , limiting apparent molar volume , transfer volume , hydration number , second derivative of infinite dilution of partial molar volume with temperature , viscosity B-coefficients, variation of B with temperature dB/dT, free energy of activation per mole of solvent and solute , activation entropy and activation enthalpy of the amino acids. These parameters have been interpreted in terms of solute-solute and solute-solvent interactions and structure making/breaking ability of solutes in the given solution.     

用超声波研究不同温度下4-氨基丁酸在硫酸柳丁氨醇水溶液中的性质(英文)

Ultrasonic speeds of 4-aminobutyric acid in 0.0041,0.0125 and 0.0207 mol·kg-1 aqueous salbutamol sulphate(SBS) solutions are measured at 308.15,313.15 and 318.15 K.Isentropic compressibility kS,change in isentropic compressibility△k S,relative change in isentropic compressibility( 0 S S △k /k) ,apparent molal compressibility kφ,limiting apparent molal compressibility k0 φ,transfer limiting apparent molal compressibility k0 φ,hydration number nH,pair and triplet interaction parameters kAS,kASS are estimated.The above parameters are used to interpret the solute-solute and solute-solvent interactions of 4-aminobutyric acid in the aqueous salbutamol sulphate solutions.     

近临界水中水解鱼蛋白制备氨基酸

The hydrolysis technology and reaction kinetics for amino acids production from fish proteins in subcritical water reactor without catalysts were investigated in a reactor with volume of 400 ml under the conditions of reaction temperature from 180-320℃, pressure from 5-26 MPa, and time from 5-60 rain. The quality and quantity of amino acids in hydrolysate were determined by bioLiquid chromatography, and 17 kinds of amino acids were obtained. For the important 8 amino acids, the experiments were conducted to examine the effects of reaction temperature, pressure and time on amino acids yield. The optimum conditions for high yield are obtained from the experimental results. It is found that the nitrogen and carbon dioxide atmosphere should be used for leucine, isoleucine and histidine production while the air atmosphere might be used for other amino acids. The reaction time of 30 rain and the experimental temperature of 220℃, 240℃ and 260℃ were adopted for reaction kinetic research. The total yield of amino acids versus reaction time have been examined experimentally. According to these experimental data and under the condition of water excess, the macroscopic reaction kinetic equation of fish proteins hydrolysis was obtained with the hydrolysis reaction order of 1.615 and the rate constants being 0.0017, 0.0045 and 0.0097 at 220℃, 240℃ and 260℃ respectively. The activation energy is 145.1 kJ·mol^- 1.     

Temperature-dependent aggregation of bio-surfactants in aqueous solutions of galactose and lactose: Volumetric and viscometric approach

Modulation in the aggregation behavior of bio-surfactants(bile salts), sodium cholate(NaC) and sodium deoxycholate(NaDC) in aqueous solutions of carbohydrates(galactose and lactose) have been investigated by measuring the density(ρ), speed of sound(u) and viscosity(η) of the mixtures at different temperatures293.15, 298.15, 303.15, 308.15 and 313.15 K. The density and speed of sound data have been used to calculate various volumetric and compressibility parameters such as apparent molar volume(V_φ), isentropic compressibility(κ_s), apparent molar adiabatic compression(κ_(s, φ)) to get a better insight into the micellization mechanism of bile salts. Further, the viscosity data have been studied in the light of relative viscosity(η_r) and viscous relaxation time(τ). Some derived parameters such as free volume(V_f), internal pressure(πi) and molar cohesive energy(MCE) of Na C and Na DC in aqueous solution of saccharides have also been calculated from viscosity data in conjunction with density and speed of sound values. All the calculated and derived parameters provide qualitative information regarding the nature of interactions i.e. solute–solute, solute–solvent and solvent–solvent in the solution.     

Measurement and correlation of physical properties of aqueous solutions of tetrabutylammonium hydroxide,piperazine and their aqueous blends

The density, viscosity and refractive index of aqueous solutions of tetrabutylammonium hydroxide (TBAOH), pi-perazine (PZ) and their aqueous blends are determined at several temperatures (303.15 to 333.15 K). All these measured physicochemical properties decreases with an increase in temperature. The density data is used to cal-culate the coefficient of thermal expansion and excess molar volume of al aqueous binary and ternary solutions. The coefficient of thermal expansion increases with increase in temperatures and concentrations. The negativity of excess molar volume for al the aqueous solution decreased with increase in temperature. Each physical prop-erty is correlated with temperature by least square method and the corresponding coefficients for each property are presented. The prediction values from correlations for the physical properties are in good agreement with the experimental values.     

用改进的Tait方程关联烷烃、芳香烃和乙醇在高压下的黏度

A new model was proposed to calculate the viscosity of fluids under the pressure ranging from 0.1 to 110MPa by improving the Tait equation, in which the viscosity μ of liquids was linked with activation volume V. The model with two adjustable parameters a and fl was applied in calculating viscosities for alkane, aromatic and alcohol family at high pressure. Results show that calculated values of viscosity are in good agreement with the experimental ones, and the average relative deviations for alkanes, aromatics and alcohols are 0.56%, 0.31% and 0.66%, respectively. Besides, the errors correlated by the model proposed in this paper were equivalent to the ones from the pure empirical Tait equation, and obviously superior to those from Eyring equation.     

288.15K-308.15K(Poloxamerl88+乙醇/丙酮+水)三元体系的密度和黏度

The densities and viscosities of ternary systems(Poloxamer 188+ethanol/acetone+water)were meas- ured at 288.15,293.15,298.15,303.15,308.15 K and atmospheric pressure for different mass fractions of Poloxamer 188(0 to 0.02)in aqueous solution and different solvent volume fractions of ethanol/acetone(0 to 0.3)in Poloxamer 188 aqueous solution.The densities were measured by a pycnometer,while the viscosities were measured using two Ubbelohde capillary viscometers.The correlations of density and viscosity of these ternary systems are obtained by fitting the experimental data at different temperatures,mass fractions and volume fractions.     

L-抗坏血酸在葡萄糖和蔗糖溶液中的黏度及其热力学性质的研究

Visosities and densities at ,several temperatures from 293.15 K to 313.15K are reported for L-ascorbic acid in aqueous glucose and sucrose solutions at different concentrations.The parameters of density,Viscosity coefficient B and partial molar volume are calculated by regression.The experimental results show that densities and viscositis decrease as temperature increases at the same solute and solvent (glucose and sucrose aueous solution)concentrations,and increase with concentration of glucose and sucrose at the same solute concentration and temperature,B increases with concentration of glucose and sucrose and temaperature,L-ascorbic acid is sturcture-breaker or structure-making for the glucose and sucrose aqueous solutions ,Furthermore,the solute-solvent interactions in ternary systems of water-glucose-electrolyte and water-sucrose-electrolyte are discussed.     

用定标粒子理论研究不同温度下2-甲基-2-丙醇与腈二元液相混合物的超额热力学参数和超音速度理论估值(英文)

Density, ρ, ultrasonic speed, u, and viscosity, η, of binary mixtures of 2-methyl-2-propanol (2M2P) with acetonitrile (AN), propionitrile (PN) and butyronitrile (BN) including those of pure liquids are measured over the entire composition range at temperatures 298.15, 303.15 and 308.15 K. From these experimental data, the excess available volume, E a V , excess free volume, E f V , excess isothermal compressibility, E T β , excess thermal expansion coefficient, E α , and excess internal pressure, E i π , are calculated. The variation of these properties with composition and temperature are discussed in terms of molecular interactions between unlike molecules of the mixtures. It is found that the values of E a V , E f V , E T β and E α are positive and those of E i π are negative for all the mixtures at each temperature studied, indicating the presence of weak interactions between 2M2P and AN/PN/BN molecules. The variations of E a V , E f V , E T β , E α and E i π values with composition indicate that the interactions in these mixtures follow the order: ANPNBN, i.e., the 2M2P-nitrile interaction decreases with the increase of alkyl chain length in these nitrile molecules. In addition, the theoretical ultrasonic velocity is calculated using the scaled particle theory and compared with the experimental values.     

Interaction of ciprofloxacin hydrochloride with sodium dodecyl sulfate in aqueous/electrolytes solution at different temperatures and compositions

Interactions of ciprofloxacin hydrochloride(CPFH) with sodium dodecyl sulfate(SDS) were investigated by conductivity measurement in H_2O/electrolyte solutions(NaCl, Na_2SO_4 Na_3PO_4) over 298.15–318.15 K temperature range(with 5 K interval) considering the human body temperature. In all cases, two critical micelle concentrations(c~*) were observed which are increased in the presence of drug and decreased in the presence of salts enunciating the presence of interaction amongst the studied components. For(CPFH + SDS) system in the presence of salt, the c~*values at 303.15 K and I = 0.50 mmol·kg~(-1) followed the order: C_(NaCl)C_(Na_2SO_4)C_(Na_3PO_4). The ΔG_(1,m)~0 and Δ G_(2,m)~0values are found to be negative for all systems that show that the micellization process is thermodynamically spontaneous. For(CPFH + SDS) system in water, the Δ H_m~0 Δ S_m~0 values reveal that the micellization processes is both entropy dominated in almost all cases. In the occurrence of electrolytes, Δ H_m~0 and Δ S_m~0 values indicate that micellization processes are both entropy enthalpy restricted at upper temperature but it becomes totally entropy dependent at higher temperature. The higher positive Δ S_m~0 values indicate the enhanced hydrophobic interaction in presence of salts. The enthalpy-entropy compensation was determined from the linear relationship betweenΔ H_m~0 and Δ S_m~0 values in every state. Different transfer energies as well as compensation temperature and intrinsic enthalpy were also evaluated and the behaviors were comparable to other biological system.     

Insight into solute-solute and solute-solvent interactions of semicarbazide hydrochloride in water and D-glucose/D-sucrose+water solutions at temperatures (293.15 to 318.15) K

The solute-solute and solute-solvent interactions of drug semicarbazide hydrochloride with carbohydrates (D-glucose/D-sucrose) are investigated by using volumetric, viscometric and acoustic properties. The measurements of the densities ρ, ultrasonic speeds u, and viscosities η. of semicarbazide hydrochloride in 5% and 10% D-glucose/D-sucrose+water (w/w) solutions were carried out at temperatures (293.15-318.15) K and at pressure, p=101 kPa. The apparent molar volumes, V_ϕ, limiting apparent molar volumes,V_ϕ°, apparent molar compressibilities, K_{s, ϕ}, limiting apparent molar compressibilities, K_s,ϕ°, partial molar expansibilities, E_ϕ°, transfer volumes, V_ϕ,tr° and transfer compressibilities, K_s,ϕ,tr° have been calculated from the experimental data. The viscosity data were examined by using the Jones-Dole equation and the viscosity A and B coefficients were evaluated. The results are discussed in terms of solute-solute and solute-solvent interactions in these solutions. The structure making/breaking ability of semicarbazide hydrochloride is examined using the sign of temperature derivative of B-coefficient, dB/dT.     

Ba2+、MoO42-掺杂对NaCaPO4：Eu3+荧光粉发光性能的影响研究

为提高红色荧光粉的发光强度和色纯度,以硝酸钙、硝酸钠、硝酸铕、磷酸二氢铵、钼酸铵、硝酸钡为原料,采用高温固相法合成了NaCa_1-xPO₄：xEu³⁺、NaCa_1-x（PO₄）_1-y（MoO₄）_y：xEu³⁺、NaCa_1-x-zPO₄：xEu³⁺,zBa²⁺系列红色荧光粉。探讨了Eu³⁺单掺杂和Eu³⁺/MoO₄^2-、Eu³⁺/Ba²⁺共掺杂对荧光粉发光性能的影响。用X射线衍射（XRD）、荧光分光光度计、色坐标等对荧光粉的结构进行表征。研究结果表明：掺杂Eu³⁺、MoO₄^2-、Ba²⁺后NaCaPO₄晶系没有发生变化,但是晶胞参数发生了变化,说明Eu³⁺、MoO₄^2-、Ba²⁺进入NaCaPO₄晶格中。在393 nm紫外光激发下,荧光粉发射光谱图出现两个Eu³⁺比较强的特征发射峰,分别属于Eu³⁺的⁵D₀→⁷F₁和⁵D₀→⁷F₂跃迁。与单掺杂16%Eu³⁺荧光粉相比,共掺杂16%Eu³⁺/3%MoO₄^2-或16%Eu³⁺/6%Ba²⁺荧光粉的发射光谱中⁵D₀→⁷F₂跃迁产生的发射峰强度均高于单掺杂16%Eu³⁺荧光粉的发射峰强度,其⁵D₀→⁷F₂与⁵D₀→⁷F₁发射光强度之比（R）分别为1.76（R_Mo）和1.28（R_Ba）,都大于单掺杂16%Eu³⁺荧光粉的R_Eu（0.99）,共掺杂Eu³⁺/MoO₄^2-荧光粉的色纯度比单掺杂Eu³⁺和共掺杂Eu³⁺/Ba²⁺荧光粉的色纯度更好。     

Estimation of the contribution of tube renewal in the terminal relaxation of linear polybutadiene

A set of low-molecular-weight (low-MW) entangled linear polybutadienes with molecular weights between 1.1 × 10⁴ and 2.5 × 10⁵ have been dilutedly embedded in a high-molecular-weight linear polybutadiene (M_w = 7.6 · 10⁵) matrix. The viscoelastic properties of these blends with 9.1% low-MW polymer have been measured. The loss moduli-frequency master curves, G^″ (Щ), contain contributions from both polymers. The contribution of the low-MW polymer is obtained by subtracting the contribution of the matrix. The maximum in G^″, G^″_m, due to the low-MW polymer occurs at a lower frequency (0.3 to 0.5 log units) than in the homopolymer. This result indicates that the longest relaxation time of the entangled linear polymer embedded in a high-molecular-weight matrix is increased by a factor of 2.0 to 3.0 because tube renewal normally operating in the homopolymer is almost completely absent in the matrix. The longest relaxation time of the polymers in the matrix depends on M^3.3₀. This is only slightly less than the dependence found in linear polymer melts (M^3.3₇). This indicates that reptation and chain-end fluctuation together contribute to the relaxation of linear polymers in permanent networks.     

脱硝协同汞氧化聚苯硫醚四元催化滤料制备方法及理化特性

采用原位氧化法（ISM）、浸渍煅烧法（ICM）和涂覆法（CM）制备聚苯硫醚（PPS）双效催化滤料,在模拟烟气固定床系统中考察了滤料低温NO_x催化协同Hg⁰氧化性能,深入分析了原位氧化滤料表面形貌、元素分布、晶态结构和Hg及NO_x赋存形态。结果表明：在相同条件下,3种制备方法对应滤料催化活性大小顺序为Mn-Ce-Fe-Co-O_x/PPS@ISM＞Mn-Ce-Fe-Co-O_x/PPS@ICM＞Mn-Ce-Fe-Co-O_x/PPS@CM。ISM对应PPS单层饱和负载量约为0.9,活性反应温度窗口为110~210℃,其中170℃时Mn-Ce-Fe-Co-O_x/PPS@ISM的非均相NO氧化、NO_x还原和Hg⁰氧化效率最高分别达到8.6%、84.6%和93.2%。程序升温脱附实验结果表明：(0.9)Mn-Ce-Fe-Co-O_x/PPS@ ISM表面NO_x吸附活性位点中弱碱位数量占优,而中碱位化学吸附NO主要以NO_y（y=2或3）结构存在,歧化态NO₂次之。同时,Hg与NO在氧气条件下以非均相反应途径转化为HgO和Hg(NO₃)₂/Hg₂(NO₃)₂。表征结果表明：ISM制备的MnO_x、CeO_x、CoO_x和Fe₂O₃复合氧化物呈弱晶相、高度分散团絮状结构赋存于PPS@ISM纤维。     

KBaB5O9的两步法制备及其过程动力学研究

本文利用溶液法制备了K₂Ba[B₄O₅(OH)₄]₂·8H₂O,并将其进行热处理制备得到了KBaB₅O₉,利用XRD、FT-IR、TG-DTA-DTG对样品进行了表征。分析研究了由K₂Ba[B₄O₅(OH)₄]₂·8H₂O热处理制备KBaB₅O₉过程中的物相变化过程,其物相变化经历脱结晶水、脱羟基、重结晶、再分解、熔融再结晶5个阶段,其中结晶水的脱失分两步进行。运用Kissinger法、Flynn-Wall-Ozawa法、Šatava-Šesták法对K₂Ba[B₄O₅(OH)₄]₂·8H₂O结晶水第二步脱失过程的动力学参数进行了计算,可知K₂Ba[B₄O₅(OH)₄]₂·8H₂O结晶水第二步脱失过程的活化能E_s为151.94 kJ/mol,指前因子的对数值lg A_s为21.25 min^-1,机理函数G(α)=(1-2α/3)-(1-α)^2/3(其中α为转化率)。     

Oxygen transport in zeolite Y measured by quenching of encapsulated tris(bipyridyl)ruthenium

This study deals with emission quenching of zeolite encapsulated trisbipyridyl ruthenium (II) (Ru(bpy)₃²⁺) by oxygen. Oxygen saturated solutions of Ru(bpy)₃²⁺ typically show about 70% quenching (I₀/I=3.3), where I₀ and I are the peak intensities of the emission in N₂ and O₂, respectively. However, an aqueous suspension of Ru(bpy)₃²⁺-zeolite Na–Y (Si/Al = 2.5) (abbreviated as Ru–Na–Y) showed no quenching at all. This observation motivated us to analyze how the transport of O₂ is occurring in the zeolite. Upon exposure of solid Ru–Na–Y (99% of intrazeolitic water) to N₂/O₂ dry gases, quenching in oxygen was found to be 5% (I₀/I=1.07). Partial dehydration at room temperature with loss of 33% of the water molecules from the zeolite led to 66% (I₀/I=2.96) quenching. Dehydration of Ru–Na–Y at 250 °C under vacuum overnight led to complete loss of intrazeolitic water and increased quenching to 90% (I₀/I=10.7). Nanocrystalline Ru(bpy)₃²⁺-zeolite Y upon vacuum dehydration lost 55% of the intrazeolitic water and showed 96% (I₀/I=25.3) quenching. The extent of quenching of Ru(bpy)₃²⁺ in zeolites by O₂ is by far the largest as compared to previously studied matrices, and is being attributed to confinement of O₂ in the supercages, which leads to increase in number of collisions with Ru(bpy)₃²⁺ and enhanced quenching. However, these samples showed complete lack of sensitivity (I₀/I=1) to oxygen upon exposure to water saturated gas or dissolved gas. Dealumination of zeolite framework by treatment with (NH₄)₂SiF₆ produced a framework of Si/Al = 9.5, and with SiCl₄ a framework of Si/Al > 100. With increasing dealumination, the extent of quenching by dissolved O₂ increased.     

舒巴坦钠溶析结晶工艺优化

目前舒巴坦钠粗品的提纯采用还原成舒巴坦酸后再经反应结晶合成舒巴坦钠的方式，耗时耗力且所需药品、试剂种类较多，不节能环保。针对该问题，采用正交实验 L_{27} \left(3^{13}\right) 对舒巴坦钠的溶析结晶工艺进行优化，探明了6个因素6个交互作用对粒度、纯度以及两者的综合评分的影响，包括养晶时间（A）、溶析剂用量（B）、溶析剂中乙醇的体积分数（C）、溶析剂的滴加速率（D）、搅拌速率（E）、温度（F）以及养晶时间分别与溶析剂用量（A×B）、与溶析剂中乙醇的体积分数（A×C）的交互作用、溶析剂用量与溶析剂中乙醇的体积分数的交互作用（B×C），并得到了一组最优方案A ₂ B ₂ C ₁ D ₃ E ₃ F ₂。通过该方案可获得纯度x>97%，体积平均粒度D[4,3]≈290μm，质量收率约为84%的舒巴坦钠产品，并发现杂质舒巴坦青霉胺对舒巴坦钠的粒度分布有一定的影响。在解决原有问题的基础上，合适粒度分布的舒巴坦钠产品也可为后续制剂工艺提供方便。     

失活钙基吸收剂环境中自活化机理

将经历多次循环后失活的钙基吸收剂置于环境中吸水自活化,通过XRD分析了自活化过程吸收剂物相演变规律,在双固定床反应器系统上分析了吸水率对失活钙基吸收剂循环捕集CO₂性能的影响规律, 通过SEM和N₂吸附分析了自活化提高钙基吸收剂循环碳酸化转化率的机理。结果表明：失活钙基吸收剂首先吸收环境中水分生成Ca(OH)₂,当吸水率达到100%后继续吸水生成Ca(OH)₂?2H₂O,自活化极限为170%;自活化可以提高失活钙基吸收剂循环碳酸化转化率,自活化后钙基吸收剂循环捕集CO₂性能与吸水率呈线性比例关系,重复自活化可再次提高吸收剂循环碳酸化转化率;自活化过程中,失活钙基吸收剂颗粒表面重新生成孔隙,比孔容和比表面积增加,有利于吸收剂中CO₂的扩散,因此自活化后钙基吸收剂循环捕集CO₂性能提高。     

Effects of the porous medium and water-silver biological nanofluid on the performance of a newly designed heat sink by using first and second laws of thermodynamics

The aim of this numerical investigation is to evaluate the laminar forced convection of biologically synthesized water-silver nanofluid through a heat sink (HS) filled with porous foam (PHS) using first and second laws of thermodynamics. The impacts of inlet velocity (V=0.5-3 m·s^-1) and volume fraction of nanofluid (φ=0-1%) on the performance metrics of HS are assessed and the outcomes are compared with those of the non-porous HS (NHS). The outcomes revealed that for both the PHS and NHS, the increase of V causes an intensification in convection coefficient, pumping power, and entropy generation due to fluid friction, while the maximum CPU temperature, thermal resistance, and entropy generation due to the heat transfer reduces by boosting V. Also, it was found that the augmentation of V results in intensification in convection coefficient, pumping power, overall hydrothermal performance, and frictional entropy generation, while the opposite is true for maximum CPU temperature, thermal resistance, and thermal entropy generation. Furthermore, it was reported that, except for φ=0.5%, the overall hydrothermal performance of NHS is better than that of PHS, while PHS has better second-law performance than NHS in all the studied cases. Also, it can be concluded that the best hydrothermal performance for PHS belongs to φ= 1% and V=0.5 m·s^-1, while for NHS, these values are 1% and 2 m·s^-1.