Semi-analytical modeling of Ag and Au nanoparticles and fullerene (C60) embedded gate oxide compound semiconductor MOSFET memory devices

In this paper we present an analytical simulation study of Non-volatile MOSFET memory devices with Ag/Au nanoparticles/fullerene (C60) embedded gate dielectric stacks. We considered a long channel planar MOSFET, having a multilayer SiO₂–HfO₂ (7.5?nm)–Ag/Au nc/C60 embedded HfO₂ (6?nm)–HfO₂ (30?nm) gate dielectric stack. We considered three substrate materials GaN, InP and the conventional Si substrate, for use in such MOSFET NVM devices. From a semi-analytic solution of the Poisson equation, the potential and the electric fields in the substrate and the different layers of the gate oxide stack were derived. Thereafter using the WKB approximation, we have investigated the Fowler-Nordheim tunneling currents from the Si inversion layer to the embedded nanocrystal states in such devices. From our model, we simulated the write-erase characteristics, gate tunneling currents, and the transient threshold voltage shifts of the MOSFET NVM devices. The results from our model were compared with recent experimental results for Au nc and Ag nc embedded gate dielectric MOSFET memories. From the studies, the C60 embedded devices showed faster charging performance and higher charge storage, than both the metallic nc embedded devices. The nc Au embedded device displayed superior characteristics compared to the nc Ag embedded device. From the model GaN emerged as the overall better substrate material than Si and InP in terms of higher threshold voltage shift, lesser write programming voltage and better charge retention capabilities.     

Intrinsic reliability projections for a thin JVD silicon nitridegate dielectric in P-MOSFET

A comprehensive study of the intrinsic reliability of a 1.4-nm (equivalent oxide thickness) JVD Si₃N₄ gate dielectric subjected to constant-voltage stress has been conducted. The stress leads to the generation of defects in the dielectric. As a result, the degradation in the threshold voltage, subthreshold swing, gate leakage current, and channel mobility has been observed. The change in each of these parameters as a function of stress time and stress voltage is studied. The data are used to project the drift of a MOSFET incorporating JVD nitride at a low operating voltage of 1.2 V in 10 years. Based on these projections, we conclude that the increase in the Si₃N₄ gate dielectric leakage current does not pose a serious threat to device performance. Instead, the degradation in the threshold voltage and channel mobility can become the factor limiting the device reliability     

Intrinsic parameter fluctuations due to random grain orientations in high-κ gate stacks

The use of high-κ material in the gate-stack of future nano-CMOS devices presents a number of technological issues which may degrade the device performance and also lead to parameter fluctuations between devices. The polycrystalline nature of many high-κ materials may lead to non-uniformity in the dielectric properties across the oxide film, resulting in fluctuations in important device parameters such as the threshold voltage. Here, the effect of random grain orientation of the high-κ dielectric in the gate stack on parameter fluctuations in the corresponding nanoscale MOSFETs is investigated.     

Computational study of double-gate graphene nano-ribbon transistors

The ballistic performance of graphene nanoribbon (GNR) MOSFETs with different width of armchair GNRs is examined using a real-space quantum simulator based on the Non-equilibrium Green’s Function (NEGF) approach, self-consistently coupled to a 3D Poisson’s equation for electrostatics. GNR MOSFETs show promising device performance, in terms of low subthreshold swing and small drain-induced-barrier-lowing due to their excellent electrostatics and gate control (single monolayer). However, the quantum tunneling effects play an import role in the GNR device performance degradation for wider width GNR MOSFETs due to their reduced bandgap. At 2.2 nm width, the OFF current performance is completely dominated by tunneling currents, making the OFF-state of the device difficult to control.     

An analytical model of triple‐material double‐gate metal–oxide–semiconductor field‐effect transistor to suppress short‐channel effects

This paper presents an analytical subthreshold model for surface potential and threshold voltage of a triple‐material double‐gate (DG) metal–oxide–semiconductor field‐effect transistor. The model is developed by using a rectangular Gaussian box in the channel depletion region with the required boundary conditions at the source and drain end. The model is used to study the effect of triple‐material gate structure on the electrical performance of the device in terms of changes in potential and electric field. The device immunity against short‐channel effects is evaluated by comparing the relative performance parameters such as drain‐induced barrier lowering, threshold voltage roll‐off, and subthreshold swing with its counterparts in the single‐material DG and double‐material DG metal–oxide–semiconductor field‐effect transistors. The developed surface potential model not only provides device physics insight but is also computationally efficient because of its simple compact form that can be utilized to study and characterize the gate‐engineered devices. Furthermore, the effects of quantum confinement are analyzed with the development of a quantum‐mechanical correction term for threshold voltage. The results obtained from the model are in close agreement with the data extracted from numerical Technology Computer Aided Design device simulation. Copyright © 2015 John Wiley & Sons, Ltd.     

A 3D analytical modeling of tri-gate tunneling field-effect transistors

In this paper, a three-dimensional (3D) analytical solution of the electrostatic potential is derived for the tri-gate tunneling field-effect transistors (TG TFETs) based on the perimeter-weighted-sum approach. The model is derived by separating the device into a symmetric and an asymmetric double-gate (DG) TFETs and then solving the 2D Poisson’s equation for these structures. The subthreshold tunneling current expression is extracted by numerical integrating the band-to-band tunneling generation rate over the volume of the device. It is shown that the potential distributions, the electric field profile, and the tunneling current predicted by the analytical model are in close agreement with the 3D device simulation results without the need of fitting parameters. Additionally, the dependence of the tunneling current on the device parameters in terms of the gate oxide thickness, gate dielectric constant, channel length, and applied drain bias is investigated and also demonstrated its agreement with the device simulations.     

Organic thin-film transistors for organic light-emitting flat-paneldisplay backplanes

The performance of organic thin-film transistors (OTFTs) has improved significantly in the last several years and it now appears likely that they will find application in low-cost large-area electronic applications. Active-matrix displays are of special interest and integration of OTFTs with organic light-emitting devices (OLEDs) in all-organic displays is particularly attractive. The device requirements for active-matrix OLED displays are very similar to those of active-matrix liquid crystal displays (AMLCDs) and can be satisfied with OTFTs fabricated using stacked pentacene active layers. Such devices have demonstrated field-effect mobility near 1.5 cm²/V·s, on/off current ratio near 10⁸, near-zero threshold voltage, and subthreshold slope less than 1.6 V/decade. These characteristics are similar to those obtained with hydrogenated amorphous silicon (a-Si:H) devices and such devices would allow the use of polymeric substrates with advantages in weight, ruggedness, and cost compared to glass substrates currently used with a-Si:H devices in AMLCDs     

A compact interband tunneling current model for Gate-on-Source/Channel SOI-TFETs

A tunneling probability-based drain current model for tunnel field-effect transistors (FETs) is presented. First, an analytical model for the surface potential and the potential at the channel–buried oxide interface is derived for a Gate-on-Source/Channel silicon on insulator (SOI)-tunnel FET (TFET), considering the effect of the back-gate voltage. Next, a drain current model is derived for the same device by using the tunneling probability at the source–channel junction. The proposed model includes physical parameters such as the gate oxide thickness, buried oxide thickness, channel thickness, and front-gate oxide dielectric constant. The proposed model is used to investigate the effects of variation of the front-gate voltage, drain voltage, back-gate voltage, and front-gate dielectric thickness. Moreover, a threshold voltage model is developed and the drain-induced barrier lowering (DIBL) is calculated for the proposed device. The effect of bandgap narrowing is considered in the model. The model is validated by comparison with Technology Computer-Aided Design (TCAD) simulation results.     

A junctionless tunnel field effect transistor with low subthreshold slope

we demonstrate the design of a triple gate n-channel junctionless transistor that we call a junctionless tunnel field effect transistor (JLTFET). The JLTFET is a heavily doped junctionless transistor which uses the concept of tunneling, by narrowing the barrier between source and channel of the device, to turn the device ON and OFF. Simulation shows significant improvement compared to simple junctionless field effect transistor both in I _ON/I _OFF ratio and subthreshold slope. Here, junctionless tunnel field effect transistors with high-k dielectric and low-k spacers are demonstrated through simulation and shows an ON-current of 0.25 mA/μm for the gate voltage of 2 V and an OFF current of 3 pA/μm (neglecting gate leakage). In addition, our device shows optimized performance with high I _ON/I _OFF (～10⁹). Moreover, a subthreshold slope of 47 mV/decade is obtained for a 50 nm gate length of simulated JLTFET at room temperature which indicates that JLTFET is a promising candidate for switching performance.     

Validity of constant voltage stress based reliability assessment of high-/spl kappa/ devices

Charge trapping in high-/spl kappa/ gate dielectrics affects the result of electrical characterization significantly. DC mobility degradation and device threshold voltage instability and C-V and I-V hysteresis are a few examples. The charging effects in high-/spl kappa/ gate dielectric also affect the validity of conventional reliability test methodologies developed for SiO/sub 2/ devices. In this paper, we review high-/spl kappa/ materials specific phenomena that can affect the validity of constant-voltage-stress-based reliability test methods to address the direction of future reliability study on high-/spl kappa/ devices.     

Modeling of tunneling current and gate dielectric reliability for nonvolatile memory devices

We present a hierarchy of tunneling models suitable for the two- and three-dimensional simulation of logic and nonvolatile semiconductor memory devices. The crucial modeling topics are comprehensively discussed, namely, the modeling of the energy distribution function in the channel to account for hot-carrier tunneling, the calculation of the transmission coefficient of single and layered dielectrics, the influence of quasi-bound states in the inversion layer, the modeling of static and transient defect-assisted tunneling, and the modeling of dielectric degradation and breakdown. We propose a set of models to link the gate leakage to the creation of traps in the dielectric layer, the threshold voltage shift, and eventual dielectric breakdown. The simulation results are compared to commonly used compact models and measurements of logic and nonvolatile memory devices.     

Analysis of tunneling currents in multilayer black phosphorous and $$\hbox {MoS}_{2}$$ non-volatile flash memory cells

This paper presents a theoretical study of tunneling current density and the leakage current through multi-layer (stacked) trapping layer in the gate dielectric in MOS non-volatile memory devices. Two different 2D materials (\(\hbox {MoS}_{2}\) and black phosphorous) with a combination of high-k dielectric (\(\hbox {HfO}_{2}\)) have been used for the study with differently ordered stacks i.e., as trapping layer and substrate. The material properties of 2D materials like density of states, effective mass and band structure has been evaluated using density functional theory simulations. Using the Maxwell–Garnett effective medium theory we have calculated the effective barrier height, effective bandgap, effective dielectric constant and effective mass of the gate dielectric stacks. By applying WKB approximation in the multi-layer trapping layer we have studied the effect of the direct and Fowler–Nordheim tunneling currents. The leakage current in all the different stack combinations used has also been evaluated. The results obtained have shown to match the required dynamics of a memory device.     

Shielded channel double-gate MOSFET: a novel device for reliable nanoscale CMOS applications

In this paper, the unique features exhibited by a novel double-gate (DG) metal-oxide-semiconductor field-effect transistor (MOSFET) in which the front gate consists of two side gates to 1) electrically shield the channel region from any drain voltage variation and 2) act as an extremely shallow virtual extension to the source/drain are presented. This structure exhibits significantly reduced short-channel effects (SCEs) when compared with the conventional DG MOSFET. Using two-dimensional (2-D) and two-carrier device simulation, the improvement in device performance focusing on threshold voltage dependence on channel length, electric field in the channel, subthreshold swing, and hot carrier effects, all of which can affect the reliability of complementary metal oxide semiconductor (CMOS) devices, was investigated.     

Uncoupled mode space approach for analysis of nanoscale strained junctionless double-gate MOSFET

In this paper, we have analyzed the electrical characteristics of Strained Junctionless Double-Gate MOSFET (Strained JL DG MOSFET). A quantum mechanical transport approach based on non-equilibrium Green’s function (NEGF) method with the use of uncoupled mode space approach has been employed for this analysis. We have investigated the effects of high-\(\kappa \) materials as gate and spacer dielectrics on the device performance. Low OFF-state current, low DIBL, and low subthreshold slope have been obtained with increase in the gate and spacer dielectric constants. The electrical characteristics of strained JL DG MOSFET have also been compared with conventional JL DG MOSFET and Inversion Mode (IM) DG MOSFET. The results indicated that the Strained JL DG MOSFET outperforms the conventional JL and IM DG MOSFETs, yielding higher values of drain current.     

Enhancing the design and performance of a gate-all-around (GAA) charge plasma nanowire field-effect transistor with the help of the negative-capacitance technique

A gate-all-around charge plasma nanowire field-effect transistor (GAA CP NW FET) device using the negative-capacitance technique is introduced, termed the GAA CP NW negative-capacitance (NC) FET. In the face of bottleneck issues in nanoscale devices such as rising power dissipation, new techniques must be introduced into FET structures to overcome their major limitations. Negative capacitance is an efficient effect that can be incorporated into a device to enhance its performance for low-power applications and help to reduce the operating voltage. The Landau–Khalatnikov equation can be applied in such cases to obtain the effective bias. To determine the effects of negative capacitance, lead zirconate titanate (PZT) ferroelectric material, a ceramic material with perovskite properties, is adopted as a gate insulator. This approach diminishes the supply voltage and reduces the power dissipation in the device. Excluding their polarization properties, ferroelectric materials are similar to dielectric materials, and PZT offers abundant polarization with improved reliability and a higher dielectric capacitance. Without proper tuning of the thickness of the PZT material, hysteresis behavior mat occur. Hence, the thickness of the PZT material (t_FE) is an essential parameter to optimize the device performance and achieve a reduced threshold voltage for the GAA CP NW NC-FET device proposed herein. Furthermore, varying the thickness of the PZT ferroelectric material can also enhance the performance. When using the highest values of t_FE, improved outcomes with an analogously lower operating voltage are observed. The effects of varying t_FE on the performance characteristics of the device including the drain current, transconductance, polarized charge, etc. are also interpreted herein.

     

Modeling gate-all-around Si/SiGe MOSFETs and circuits for digital applications

Apart from excellent electrostatic capability and immunity to short-channel effects, the performance of gate-all-around (GAA) nanowire (NW) metal-oxide-semiconductor field-effect transistors (MOSFETs) can be further enhanced by incorporating strain. Owing to the technological importance of strained GAA (S-GAA) NW MOSFETs in modern electronics, we have proposed an analytical model of the threshold voltage and drain current for S-GAA NW MOSFETs taking into account the appreciable contributions of source (S) and drain (D) series resistances in the nanometer regime, along with quantum mechanical effect. We have focused on the elliptical cross section of the device as is necessary to consider the fabrication imperfections which give rise to such cross section, rather than an ideal circular structure. Incorporating S/D series resistance in the model of drain current demands for algorithms based on multi-iterative technique, which has been proposed in this paper for analyzing the impact of strain, NW width, aspect ratio and so on, on the performance of S-GAA NW devices with emphasis on CMOS digital circuits. Based on our proposed methodology, we have also investigated the scope of using high-k dielectric materials and metal gate in S-GAA NW structures.     

Heterogate junctionless tunnel field-effect transistor: future of low-power devices

Gate dielectric materials play a key role in device development and study for various applications. We illustrate herein the impact of hetero (high-k/low-k) gate dielectric materials on the ON-current (\(I_{\mathrm{ON}}\)) and OFF-current (\(I_{\mathrm{OFF}}\)) of the heterogate junctionless tunnel field-effect transistor (FET). The heterogate concept enables a wide range of gate materials for device study. This concept is derived from the well-known continuity of the displacement vector at the interface between low- and high-k gate dielectric materials. Application of high-k gate dielectric material improves the internal electric field in the device, resulting in lower tunneling width with high \(I_{\mathrm{ON}}\) and low \(I_{\mathrm{OFF}}\) current. The impact of work function variations and doping on device performance is also comprehensively investigated.     

Double gate graphene nanoribbon field effect transistor with electrically induced junctions for source and drain regions

In this paper a novel graphene nanoribbon transistor with electrically induced junction for source and drain regions is proposed. An auxiliary junction is used to form electrically induced source and drain regions beside the main regions. Two parts of same metal are implemented at both sides of the main gate region. These metals which act as side gates are connected to each other to form auxiliary junction. A fixed voltage is applied on this junction during voltage variation on other junctions. Side metals have smaller workfunction than the middle one. Tight-binding Hamiltonian and nonequilibrium Green’s function formalism are used to perform atomic scale electronic transport simulation. Due to the difference in metals workfunction, additional gates create two steps in potential profile. These steps increase horizontal distance between conduction and valance bands at gate to drain/source junction and consequently lower band to band tunneling probability. Current ratio and subthreshold swing improved at different channel lengths. Furthermore, device reliability is improved where electric field at drain side of the channel is reduced. This means improvement in leakage current, hot electron effect behavior and breakdown voltage. Application to multi-input logic gates shows higher speed and smaller power delay product in comparison with conventional platform.     

Temperature-dependent short-channel parameters of FinFETs

The remarkable development and continual proliferation of research in the nanotechnology field have led to improvement in the efficiency of elementary devices. To improve their performance, the parameters of such devices can be scaled down while optimizing their characteristics. However, this simultaneously results in degraded switching characteristics and the appearance of short-channel effects. Multigate-based fin-shaped field-effect transistors (FinFETs) represent a new option to address all these problems. However, thermal failure of FinFET devices under nominal operating conditions is an important issue in the design and implementation of high-speed semiconductor devices. It is also seen that bulk FinFETs exhibit better thermal performance compared with silicon-on-insulator FinFETs. In the work presented herein, various FinFET characteristics including the subthreshold swing, drain-induced barrier lowering, threshold voltage, and drain current were investigated as functions of temperature. The (effective) channel length is larger than the physical gate length (in off-state) due to the undoped underlap regions. This paper also discusses the effects of drain, source, and gate overlap.     

Performance enhancement of recessed silicon channel double gate junctionless field-effect-transistor using TCAD tool

In this paper, we propose an n-type double gate junctionless field-effect-transistor using recessed silicon channel. The recessed silicon channel reduces the channel thickness between the underlap regions, results in lowering the number of charge carriers in the silicon channel, and therefore, diminishing the OFF-current in the device. The proposed device shows similar electrical characteristics with improved transconductance, as compared to the conventional double gate junctionless field-effect-transistor. The effect of channel length scaling on the performance have been investigated, and it has been found that the recessed junctionless device shows higher ON-to-OFF current ratio, lower subthreshold swing and better immunity against the short channel effects, namely threshold voltage roll-off and drain-induced-barrier-lowering. For a channel length of 20 nm the OFF-current of the order of 1.20?×?10^–14 A/µm, ON-to-OFF current ratio of the order of 6.01?×?10¹⁰, subthreshold swing of the value of 67 mV/dec, and DIBL of 37.8 mV V^?1 has been achieved with the proposed junctionless device, in comparison of conventional double gate junctionless FET. The performance of proposed device with respect to the variations in depth and length of recessed silicon area, has also been presented as a roadmap for further tuning of its electrical behaviour. Comparatively, steeper DC transfer characteristics and improved rail-to-rail swing in transient behaviour has been reported with the designed complementary metal–oxide–semiconductor inverter, based on recessed double gate junctionless FET. The proposed recessed silicon channel double gate junctionless field-effect-transistor has been simulated using TCAD tool.