The role of Saccharomyces cerevisiae coronin in the actin and microtubule cytoskeletons

Coronin was originally identified as a cortical protein associated with the actin cytoskeleton in Dictyostelium [1]. More recent studies have revealed that coronin is involved in actin-based motility, cytokinesis and phagocytosis [2,3]. Here, we describe the identification of a single homolog of coronin in Saccharomyces cerevisiae, which we show localizes to cortical actin patches in an actin-dependent manner. Unlike Dictyostelium mutants that lack coronin, yeast strains lacking coronin had no detectable defects in actin-based processes. This may reflect differences in the functions of the actin cytoskeleton in these two organisms. Previous studies have shown that cortical actin may mediate astral microtubule-based movements of the mitotic spindle in S. cerevisiae [4,5] and that, during mitosis in Dictyostelium, the regions of the cell cortex that overlap with astral microtubules become enriched in actin and coronin [6]. We therefore examined whether yeast lacking coronin had defects in the microtubule cytoskeleton. The mutant strains had increased sensitivity to the microtubule-destabilizing drug benomyl and an increased number of large-budded cells with short spindles. Further examination of microtubule-related processes, including spindle formation, migration of the mitotic spindle to the bud neck, spindle elongation, and translocation of the elongating spindle through the bud neck, failed to reveal any defects in the coronin mutant. Taken together, these results suggest that S. cerevisiae coronin is a component of the actin cytoskeleton that may interact with the microtubule cytoskeleton.     

Distinct roles for the actin and microtubule cytoskeletons in the morphogenesis of epidermal hairs during wing development in Drosophila

We have found that the actin and microtubule cytoskeletons have overlapping, but distinct roles in the morphogenesis of epidermal hairs during Drosophila wing development. The function of both the actin and microtubule cytoskeletons appears to be required for the growth of wing hairs, as treatment of cultured pupal wings with either cytochalasin D or vinblastine was able to slow prehair extension. At higher doses a complete blockage of hair development was seen. The microtubule cytoskeleton is also required for localizing prehair initiation to the distalmost part of the cell. Disruption of the microtubule cytoskeleton resulted in the development of multiple prehairs along the apical cell periphery. The multiple hair cells were a phenocopy of mutations in the inturned group of tissue polarity genes, which are downstream targets of the frizzled signaling/signal transduction pathway. The actin cytoskeleton also plays a role in maintaining prehair integrity during prehair development as treatment of pupal wings with cytochalasin D, which inhibits actin polymerization, led to branched prehairs. This is a phenocopy of mutations in crinkled, and suggests mutations that cause branched hairs will be in genes that encode products that interact with the actin cytoskeleton.     

H2O2-treated actin: assembly and polymer interactions with cross-linking proteins

During inflammation, hydrogen peroxide, produced by polymorphonuclear leukocytes, provokes cell death mainly by disarranging filamentous (polymerized) actin (F-actin). To show the molecular mechanism(s) by which hydrogen peroxide could alter actin dynamics, we analyzed the ability of H2O2-treated actin samples to polymerize as well as the suitability of actin polymers (from oxidized monomers) to interact with cross-linking proteins. H2O2-treated monomeric (globular) actin (G-actin) shows an altered time course of polymerization. The increase in the lag phase and the lowering in both the polymerization rate and the polymerization extent have been evidenced. Furthermore, steady-state actin polymers, from oxidized monomers, are more fragmented than control polymers. This seems to be ascribable to the enhanced fragility of oxidized filaments rather than to the increase in the nucleation activity, which markedly falls. These facts; along with the unsuitability of actin polymers from oxidized monomers to interact with both filamin and alpha-actinin, suggest that hydrogen peroxide influences actin dynamics mainly by changing the F-actin structure. H2O2, via the oxidation of actin thiols (in particular, the sulfhydryl group of Cys-374), likely alters the actin C-terminus, influencing both subunit/subunit interactions and the spatial structure of the binding sites for cross-linking proteins in F-actin. We suggest that most of the effects of hydrogen peroxide on actin could be explained in the light of the "structural connectivity," demonstrated previously in actin.     

A new model for microtubule-associated protein (MAP)-induced microtubule assembly. The Pro-rich region of MAP4 promotes nucleation of microtubule assembly in vitro

The microtubule-binding domains of microtubule-associated protein (MAP) 2, tau, and MAP4 are divided into three distinctive regions: the Pro-rich region, the AP sequence region and the tail region (Aizawa, H., Emori, Y., Murofushi, H., Kawasaki, H., Sakai., H., and Suzuki, K. (1990) J. Biol. Chem. 265, 13849-13855). Electron microscopic observation showed that the taxol-stabilized microtubules alone and those mixed with the A4T fragment (containing the AP sequence region and the tail region) had a long, wavy appearance, while those mixed with the PA4T fragment (containing the Pro-rich region, the AP sequence region, and the tail region) or the PA4 fragment (containing the Pro-rich region and the AP sequence region) were shorter and straighter. Stoichiometries of the binding between the fragments and the tubulin dimers were approximately between 1 and 2, suggesting that not all of the AP sequences in the AP sequence region bound to tubulin. Binding affinity of the PA4T fragment is only four times higher than that of the A4T fragment, while the microtubule nucleating activity of the PA4T fragment is far greater. Based on these results, we propose that the nucleation of microtubule assembly is promoted by the bridging activity of the Pro-rich region in the MAPs.     

Inability to detect Chlamyodomonas microtubule assembly in vitro: possible implications to the in vivo regulation of microtubule assembly

It has been demonstrated that the in vitro assembly of microtubules from Chlamydomonas preparations does not occur under a wide range of conditions, including those efficacious for mammalian brain tubulin. This incompetence of Chlamydomonas extracts to form microtubules is independent of the tubulin concentration, the presence of added nucleotides or an added seed, temperature, or the concentration of divalent cation. However, an amorphous aggregate was observed under certain conditions, who composition was mainly tubulin. The in vitro reassembly of microtubules in gerbil brain extracts is inhibited by Chlamydomonas preparations. Fractionation of the Chlamydomonas extracts by column chromatography suggests that the inhibitory component is Chlamydomonas tubulin itself. The mechanism of this inhibition is unknown, but reassembly experiments indicate that the 2 types of tubulins cannot copolymerize. We suggest that the Chlamydomonas tubulin, derived from a cytoplasmic pool, requires to be activated prior to its in vivo polymerization into microtubules.     

Glycolytic enzymes and assembly of microtubule networks

The ability of glycolytic enzymes, glyceraldehyde-3-phosphate dehydrogenase (GAPDH), aldolase, pyruvate kinase (PK), and lactate dehydrogenase muscle-type (LDH(M)), to generate interactive microtubule networks was investigated. Bundles have previously been defined as the parallel alignment of several microtubules and are one form of microtubule networks. Utilizing transmission electron microscopy, interactive networks of microtubules as well as bundles were readily observed in the presence of GAPDH, aldolase, or PK. These networks appear morphologically as cross-linked microtubules, oriented in many different ways. Light scattering indicated that the muscle forms of GAPDH, aldolase, PK and LDH(m) caused formation of the microtubule networks. Triose phosphate isomerase (TPI) and lactate dehydrogenase heart-type (LDH(H)), glycolytic enzymes which do not interact with tubulin or microtubules, did not produce bundles, or interactive networks. Sedimentation experiments confirmed that the enzymes that cross-link also co-pellet with the microtubules. Such cross-linking of microtubules indicate that the enzymes are multivalent with the capability of simultaneous binding to more than one microtubule.     

Roles of nucleoside triphosphates in microtubule assembly

Depolymerization of microtubules in the ATP-reassembly buffer permitted the preparation of GDPETNGTP. Incubation of this tubulin fraction at 35 degrees with ATP induced the phosphorylation of E-site GDP into GTP, which was then dephosphorylated during microtubule assembly. Incubation of GDPETNGTP with phosphoenolpyruvate and pyruvate kinase [EC 2.7.1.40] also induced polymerization. Depolymerization of microtubules in the GTP-reassembly buffer yielded GTPETNGTP, which was capable of polymerizing into microtubules even in the absence of free GTP. In the presence of 4 M glycerol, GDPETNGTP assembled into microtubules with no change in the bound nucleotides.     

Evidence for the role of actin filaments in regulating cell swelling

Actin filaments could play a role in regulation of cell swelling by two distinct mechanisms. One is by a tensile mechanism involving the coordinated interaction of actin and actin-associated proteins with all plasma membrane domains. The actin-membrane linkage would restrain cell swelling in the event of the influx of water. In shark rectal gland cells, conditions that cause massive cell swelling (i.e., high K medium, exposure to mercurials) are associated with disruption of membrane-associated actin filaments. Under conditions that result in only moderate swelling (Na-pump inhibition, Li substitution) the actin filaments remain associated with the cell membrane. Thus, in this cell type, disruption of the actin-membrane organization is correlated with increased swelling. Another mechanism by which actin could limit cell swelling is via regulation of ion transport proteins that are activated by cell swelling. This could be accomplished by a vesicle transport and insertion mechanism that delivers ion transport units to the cell membrane or by interaction with transport proteins already present in the membrane. Cell-attached patch clamp studies of RCCT-28A cells exposed to hypotonic medium demonstrated the activation of Cl-channel activity coincident with an alteration in actin. Activation of the channel was mimicked by stretching the membrane. Exposure of inside-out patches to cytochalasins also increased Cl-channel activity. Treatment of isolated patches with phalloidin inhibited stretch-induced activation. Thus, regulation of a volume-sensitive Cl-channel appears to be directly related to the state of organization of actin filaments.     

Sulphonate buffers affect the recovery of microtubule-associated proteins MAP1 and MAP2: evidence that MAP1A promotes microtubule assembly

The influence of two commonly used sulphonate buffers, PIPES and MES, on the in vitro assembly of bovine brain microtubule protein was examined. Microtubule assembly was monitored by turbimetry and, after centrifugation, the polymerised protein was analysed by SDS-PAGE and western blotting. Assembly in MES when compared with PIPES resulted in a higher recovery of microtubule proteins at both pH 6.4 and pH 6.9 and in an altered protein composition. The buffer pH affected the total amount of protein polymerised but did not significantly affect the protein composition. At both pH conditions the recovery of HMW-MAPs was markedly increased in MES buffer and this increase was mostly due to an increase in the amount of MAP1.     

Modification of the bi-directional sliding movement of actin filaments along native thick filaments isolated from a clam

A reliable viability assay for Giardia is required for the development of disinfection process design criteria and pathogen monitoring by water treatment utilities. Surveys of single-staining nucleic acid dyes (stain dead parasites only), and double-staining vital dye kits from Molecular Probes (stain live and dead parasites) were conducted to assess the viability of untreated, heat-killed, and chemically inactivated Giardia muris cysts. Nucleic acid staining results were compared to those of in vitro excystation and animal infectivity. Nucleic acid stain, designated as SYTO-9, was considered the best among the single-staining dyes for its ability to stain dead cysts brightly and its relatively slow decay rate of visible light emission following DNA binding. SYTO-9 staining was correlated to animal infectivity. A Live/Dead BacLight was found to be the better of 2 double-staining viability kits tested. Logarithmic survival ratios based on SYTO-9 and Live/Dead BacLight were compared to excystation and infectivity results for G. muris cysts exposed to ozone or free chlorine. The results indicate that SYTO-9 and Live/Dead BacLight staining is stable following treatment of cysts with chemical disinfectants.     

Kinetic studies on the effect of yeast cofilin on yeast actin polymerization

The effect of yeast cofilin on the kinetics of polymerization of yeast actin has been examined at 20 degrees C at both pH 8.0 and 6.6. In the absence of cofilin, the kinetic data may be described by a simple nucleation-elongation mechanism. Kinetic data in the presence of cofilin suggests a complex dependence on the cofilin concentration. At low cofilin-to-actin ratios, cofilin increases the rate of polymerization in a way best fit by assuming filament fragmentation. The apparent fragmentation rate constants increase with increasing cofilin concentration leveling off above a cofilin-to-actin ratio of 1:8 and are independent of pH. At higher cofilin-to-actin ratios, a nonpolymerizable cofilin-G-actin complex forms resulting in a decreased rate of polymerization. The data from fluorescence photobleaching recovery experiments at low cofilin-to-actin ratios are consistent with the presence of severed filaments at both pH 8 and 6.6. However, at pH 8 and a cofilin-to-actin ratio of 1:16, about 40-50% of the total actin is present as G-actin after polymerization while at pH 6.6 little or no G-actin is present at the same cofilin-to-actin ratio. The results suggest some cooperativity with respect to cofilin binding to filamentous actin which may be pH dependent.     

alpha-crystallin stabilizes actin filaments and prevents cytochalasin-induced depolymerization in a phosphorylation-dependent manner

alpha-crystallin, a major lens protein of approximately 800 kDa with subunits of about 20 kDa has previously been shown to act as a chaperone protecting other proteins from stress-induced damage and to share sequence similarity with small heat-shock proteins, sHsp. It is now demonstrated that this chaperone effect extends to protection of the intracellular matrix component actin. It was found that the powerful depolymerization effect of cytochalasin D could be almost completely blocked by alpha-crystallin, alpha A-crystallin or alpha B-crystallin. However, phosphorylation of alpha-crystallin markedly decreased its protective effect. It is suggested that phosphorylation of alpha-crystallin may contribute to changes in actin structure observed during cellular remodeling that occurs with the terminal differentiation of a lens epithelial cell to a fiber cell and contributes to cellular remodeling in other cell types that contain alpha-crystallin species. This communication presents biochemical evidence clearly demonstrating that alpha-crystallin is involved in actin polymerization-depolymerization dynamics. It is also shown that alpha-crystallin prevented heat-induced aggregation of actin filaments. alpha-crystallin was found to stabilize actin polymers decreasing dilution-induced depolymerization rates up to twofold while slightly decreasing the critical concentration from 0.23 microM to 0.18 microM. Similar results were found with either alpha-crystallin or its purified subunits alpha A-crystallin and alpha B-crystallin. In contrast to the experiments with cytochalasin D, phosphorylation had no effect. There does not appear to be an interaction between alpha-crystallin and actin monomers since the effect of alpha-crystallin in enhancing actin polymerization does not become apparent until some polymerization has occurred. Examination of the stoichiometry of the alpha-crystallin effect indicates that 2-3 alpha-crystallin monomers/actin monomer give maximum actin polymer stabilization.     

Rho- and rac-dependent assembly of focal adhesion complexes and actin filaments in permeabilized fibroblasts: an essential role for ezrin/radixin/moesin proteins

The small GTPases Rho and Rac regulate actin filament assembly and the formation of integrin adhesion complexes to produce stress fibers and lamellipodia, respectively, in mammalian cells. Although numerous candidate effectors that might mediate these responses have been identified using the yeast two-hybrid and affinity purification techniques, their cellular roles remain unclear. We now describe a biological assay that allows components of the Rho and Rac signaling pathways to be identified. Permeabilization of serum-starved Swiss 3T3 cells with digitonin in the presence of guanosine 5'-O-(3-thiotriphosphate) (GTPgammaS) induces both actin filament and focal adhesion complex assembly through activation of endogenous Rho and Rac. These responses are lost when GTPgammaS is added 6 min after permeabilization, but can be reconstituted using concentrated cytosolic extracts. We have achieved a 10,000-fold purification of the activity present in pig brain cytosol and protein sequence analysis shows it to contain moesin. Using recombinant proteins, we show that moesin and its close relatives ezrin and radixin can reconstitute stress fiber assembly, cortical actin polymerization and focal complex formation in response to activation of Rho and Rac.     

Dynamic cross-linking by alpha-actinin determines the mechanical properties of actin filament networks

We used smooth muscle alpha-actinin to evaluate the contribution of cross-linker dynamics to the mechanical properties of actin filament networks. Recombinant actin-binding domain (residues 2-269) binds actin filaments with a Kd of 1 microM at 25 degrees C, 20 times stronger than actin-binding domain produced by thermolysin digestion of native alpha-actinin (residues 25-257). Between 8 and 25 degrees C the rate constants for recombinant actin-binding domain to bind to (0.8-2.7 microM-1 s-1) and dissociate from (0.2-2.4 s-1) actin filaments depend on temperature. At 8 degrees C actin filaments cross-linked with alpha-actinin are stiff and nearly solid, whereas at 25 degrees C the mechanical properties approach those of actin filaments alone. In these experiments, high actin concentrations kept most of the alpha-actinin bound to actin and temperature varied a single parameter, cross-linker dynamics, because the mechanical properties of pure actin filaments (a viscoelastic gel) or biotinylated actin filaments cross-linked irreversibly by avidin (a stiff viscoelastic solid) depend little on temperature. These results show that the rate of exchange of dynamic cross-links between actin filaments is an important determinant of the mechanical properties of the networks.     

The yeast spindle pole body component Spc72p interacts with Stu2p and is required for proper microtubule assembly

We have previously shown that Stu2p is a microtubule-binding protein and a component of the Saccharomyces cerevisiae spindle pole body (SPB). Here we report the identification of Spc72p, a protein that interacts with Stu2p. Stu2p and Spc72p associate in the two-hybrid system and can be coimmunoprecipitated from yeast extracts. Stu2p and Spc72p also interact with themselves, suggesting the possibility of a multimeric Stu2p-Spc72p complex. Spc72p is an essential component of the SPB and is able to associate with a preexisting SPB, indicating that there is a dynamic exchange between soluble and SPB forms of Spc72p. Unlike Stu2p, Spc72p does not bind microtubules in vitro, and was not observed to localize along microtubules in vivo. A temperature-sensitive spc72 mutation causes defects in SPB morphology. In addition, most spc72 mutant cells lack cytoplasmic microtubules; the few cytoplasmic microtubules that are observed are excessively long, and some of these are unattached to the SPB. spc72 cells are able to duplicate and separate their SPBs to form a bipolar spindle, but spindle elongation and chromosome segregation rarely occur. The chromosome segregation block does not arrest the cell cycle; instead, spc72 cells undergo cytokinesis, producing aploid cells and polyploid cells that contain multiple SPBs.