Effect of strain on microwave noise characteristics in In/sub 0.52/Al/sub 0.48/As/In/sub x/Ga/sub 1-x/As (0.53

Chough  K.B. Hong  W.-P. Florez  L. Song  J.I. 《Electronics letters》1993,29(15):1338-1340

Microwave performance of 0.4 mu m gate metamorphic In/sub 0.29/Al/sub 0.71/As/In/sub 0.3/Ga/sub 0.7/As HEMT on GaAs substrate

MBE grown metamorphic In/sub 0.29/Al/sub 0.71/As/In/sub 0.3/Ga/sub 0.7/As/GaAs high electron mobility transistors (HEMTs) have been successfully fabricated. A 0.4 mu m triangular gate device showed transconductance as high as 700 mS/mm at a current density of 230 mA/mm. The measured f/sub T/ was 45 GHz and f/sub max/ was 115 GHz. These high values are, to the authors knowledge, the first reported for submicrometre metamorphic InAlAs/InGaAs/GaAs HEMTs with an indium content of 30%.<>     

The microwave power performance comparisons of Al/sub x/Ga/sub 1-x/As/In/sub 0.15/Ga/sub 0.85/As (x=0.3, 0.5, 0.7, 1.0) doped-channel HFETs

The properties of doped-channel field-effect transistors (DCFET) have been thoroughly investigated on Al/sub x/Ga/sub 1-x/As/InGaAs (x= 0.3, 0.5, 0.7, 1) heterostructures with various Al mole fractions. In this study, we observed that by introducing a 200-/spl Aring/-thick Al/sub 0.5/Ga/sub 0.5/As (x=0.5) Schottky layer can enhance the device power performance, as compared with the conventional x=0.3 AlGaAs composition system. However, a degradation of the device power performance was observed for further increasing the Al mole fractions owing to their high sheet resistance and surface states. Therefore, Al/sub 0.5/Ga/sub 0.5/As Schottky layer design provides a good opportunity to develop a high power device for power amplifier applications.     

Al/sub 0.3/Ga/sub 0.7/As/In/sub x/Ga/sub 1-x/As (0/spl les/x/spl les/0.25) doped-channel field-effect transistors (DCFET's)

The properties of both lattice-matched and strained doped-channel field-effect transistors (DCFET's) have been investigated in AlGaAs/In/sub x/Ga/sub 1-x/As (0/spl les/x/spl les/0.25) heterostructures with various indium mole fractions. Through electrical characterization of grown layers in conjunction with the dc and microwave device characteristics, we observed that the introduction of a 150-/spl Aring/ thick strained In/sub 0.15/Ga/sub 0.85/As channel can enhance device performance, compared to the lattice-matched one. However, a degradation of device performance was observed for larger indium mole fractions, up to x=0.25, which is associated with strain relaxation in this highly strained channel. DCFET's also preserved a more reliable performance after biased-stress testings.<>     

Ga/sub 0.8/In/sub 0.2/As/GaAs/Ga/sub 0.51/In/sub 0.49/P buried ridge structure single quantum well laser emitting at 0.98 mu m

The first fabrication is reported of a buried ridge structure Ga/sub 0.8/In/sub 0.2/As/GaAs/Ga/sub 0.51/In/sub 0.49/P laser emitting at 0.98 mu m grown by two-step low pressure metal organic chemical vapour deposition. The width of the ridge is 2 mu m. Laser output power greater than 40 mW with a threshold current of 30 mA has been measured. A typical quantum efficiency of eta =60% was obtained without any facet coating. Excellent homogeneity and uniformity have been achieved over a wafer area of 10 cm/sup 2/.<>     

Characteristics of In/sub 0.425/Al/sub 0.575/As-InxGa/sub 1-x/As metamorphic HEMTs with pseudomorphic and symmetrically graded channels

In/sub 0.425/Al/sub 0.575/As-In/sub x/Ga/sub 1-x/As metamorphic high electron mobility transistors (MHEMTs) with two different channel designs, grown by molecular beam epitaxy (MBE) system, have been successfully investigated. Comprehensive dc and high-frequency characteristics, including the extrinsic transconductance, current driving capability, device linearity, pinch-off property, gate-voltage swing, breakdown performance, unity-gain cutoff frequency, max. oscillation frequency, output power, and power gain, etc., have been characterized and compared. In addition, complete parametric information of the small-signal device model has also been extracted and discussed for the pseudomorphic channel MHEMT (PC-MHEMT) and the V-shaped symmetrically graded channel MHEMT (SGC-MHEMT), respectively.     

Optimized breakdown probabilities in Al/sub 0.6/Ga/sub 0.4/As-GaAs heterojunction avalanche photodiodes

Recently, it has been shown that the noise characteristics of heterojunction Al/sub 0.6/Ga/sub 0.4/As-GaAs avalanche photodiodes (APDs) can be optimized by proper selection of the width of the Al/sub 0.6/Ga/sub 0.4/As layer. Similar trends have also been shown theoretically for the bandwidth characteristics. The resulting noise reduction and potential bandwidth enhancement have been attributed to the fact that the high bandgap Al/sub 0.6/Ga/sub 0.4/As layer serves to energize the injected electrons, thereby minimizing their first dead space in the GaAs layer. We show theoretically that the same optimized structures yield optimal breakdown-probability characteristics when the APD is operated in Geiger mode. The steep breakdown-probability characteristics, as a function of the excess bias, of thick multiplication regions (e.g., in a 1000-nm GaAs homojunction) can be mimicked in much thinner optimized Al/sub 0.6/Ga/sub 0.4/As-GaAs APDs (e.g., in a 40-nm Al/sub 0.6/Ga/sub 0.4/As and 200-nm GaAs structure) with the added advantage of having a reduced breakdown voltage (e.g., from 36.5 V to 13.7 V).     

Direct optical injection locking of monolithically integrated In/sub 0.53/Ga/sub 0.47/As/In/sub 0.52/Al/sub 0.48/As MODFET oscillators

The authors have fabricated monolithically integrated In/sub 0.53/Ga/sub 0.47/As/In/sub 0.52/Al/sub 0.48/As 0.25 mu m gate modulation-doped field effect transistor (MODFET) oscillators. The results of direct optical subharmonic injection locking of these oscillator circuits at 10.159 and 19.033 GHz are presented.<>     

Thermal stability of Al/AlGaAs and Al/GaAs/AlGaAs (MBE) Schottky barriers

Outstanding stability has been observed in Al/Al/sub x/Ga/sub 1-x/As and Al/GaAs/Al/sub x/Ga/sub 1-x/As (x=0.25) Schottky barriers prepared by depositing Al in situ by MBE on annealing up to 400 degrees C. Conventionally evaporated barriers have been fabricated and compared with epitaxial ones. The changes in barrier height and ideality factor induced by annealing are reported.<>     

Avalanche noise characteristics of single Al/sub x/Ga/sub 1-x/As(0.3

Groves  C. Chia  C.K. Tozer  R.C. David  J.P.R. Rees  G.J. 《Quantum Electronics, IEEE Journal of》2005,41(1):70-75

BCB-bridged distributed wideband SPST switch using 0.25-/spl mu/m In/sub 0.5/Al/sub 0.5/As--In/sub 0.5/Ga/sub 0.5/As metamorphic HEMTs

In/sub 0.5/Al/sub 0.5/As--In/sub 0.5/Ga/sub 0.5/As metamorphic high-electron mobility transistor (mHEMT) dc-30 GHz distributed single-pole-single through (SPST) switches were designed and fabricated using the low-/spl kappa/ benzocyclobutene (BCB) bridged technology. The current gain cutoff frequency, and the electron transit time of In/sub 0.5/Al/sub 0.5/As--In/sub 0.5/Ga/sub 0.5/As mHEMTs have been investigated. By analyzing the extrinsic total delay time, the effective velocity of electrons can be estimated, and the average velocity is 2.3/spl times/10/sup 7/cm/s. The dc-30 GHz distributed wideband SPST switch exhibits an insertion loss of less than 5.5 dB, and an isolation larger than 30 dB, which is the first demonstration of the high-isolation of InAlAs-InGaAs mHEMTs monolithic switch. As to the power performance, this switch can handle the power up to 12 dBm at 2.4 GHz. After over 250 h of 85-85 (temperature =85/spl deg/C, humidity =85%) environmental evaluation, this BCB passivated and bridged microwave and monolithic integrated circuit switch demonstrates reliable RF characteristics without any significant performance change, which proves that this process using the low-/spl kappa/ BCB layer is attractive for millimeter-wave circuit applications.     

Optical tuning of monolithic In/sub 0.53/Ga/sub 0.47/As/In/sub 0.52/Al/sub 0.48/As/InP modulation-doped field-effect transistor oscillators at X and R band

The authors have experimentally studied the optical control and optical tuning characteristics of monolithically integrated In/sub 0.53/Ga/sub 0.47/As/In/sub 0.52/Al/sub 0.48/As modulation-doped field-effect transistor (MODFET) oscillators operating in the X and R bands. For a 20 mu W intrinsic photoexcitation on the device, the maximum frequency shift for the X- and R-band oscillators was 8.7 and 11.7 MHz, respectively.<>     

Performance improvement in tensile-strained In/sub 0.5/Al/sub 0.5/As/In/sub x/Ga/sub 1-x/As/In/sub 0.5/Al/sub 0.5/As metamorphic HEMT

This paper proposes a In/sub 0.5/Al/sub 0.5/As/In/sub x/Ga/sub 1-x/As/In/sub 0.5/Al/sub 0.5/As (x=0.3-0.5-0.3) metamorphic high-electron mobility transistor with tensile-strained channel. The tensile-strained channel structure exhibits significant improvements in dc and RF characteristics, including extrinsic transconductance, current driving capability, thermal stability, unity-gain cutoff frequency, maximum oscillation frequency, output power, power gain, and power added efficiency.     

Submicron RIE recessed InGaP/InGaAs doped-channel FETs

High performance submicron In/sub 0.49/Ga/sub 0.51/P/In/sub 0.15/Ga/sub 0.85/As doped-channel heterostructure field effect transistors (HFETs) have been developed and characterized. In order to achieve a high uniformity of device characteristics crossing the wafer, BCl/sub 3/+CHF/sub 3/ reactive ion etching technology in gate-recessed process is applied to fabricate the InGaP/InGaAs doped-channel FETs. The unity current gain cut-off frequency (f/sub T/), maximum frequency of oscillation (f/sub max/), and threshold voltage have been investigated versus the gate-length. The improved microwave performance in smaller gate-length devices is mainly associated with the reduction of the input capacitance. The 0.2 /spl times/ 200-/spl mu/m/sup 2/ gate-dimension DCFET exhibits a saturated P/sub out/ of 18.9 dBm, a power density of 388 mW/mm, a PAE of 35%, and an associated gain of 14 dB at 2.4 GHz.     

Linewidth enhancement factor and near-field pattern in tunnel injection In/sub 0.4/Ga/sub 0.6/As self-assembled quantum dot lasers

Measurements of ultra-low linewidth enhancement factor in ridge-waveguide tunnel injection In/sub 0.4/Ga/sub 0.6/As/GaAs self-assembled quantum dot lasers have been made and the results compared with similar quantum well lasers. Values of /spl alpha//spl sim/3.8 were measured in the quantum well lasers, and /spl alpha/ was /spl les/0.7 in the quantum dot lasers. The consequent suppression of filamentation in the quantum dot devices has also been observed.     

Reliability investigation of 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel

The authors have investigated the reliability performance of G-band (183 GHz) monolithic microwave integrated circuit (MMIC) amplifiers fabricated using 0.07-/spl mu/m T-gate InGaAs-InAlAs-InP HEMTs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel on 3-in wafers. Life test was performed at two temperatures (T/sub 1/ = 200 /spl deg/C and T/sub 2/ = 215 /spl deg/C), and the amplifiers were stressed at V/sub ds/ of 1 V and I/sub ds/ of 250 mA/mm in a N/sub 2/ ambient. The activation energy is as high as 1.7 eV, achieving a projected median-time-to-failure (MTTF) /spl ap/ 2 /spl times/ 10/sup 6/ h at a junction temperature of 125 /spl deg/C. MTTF was determined by 2-temperature constant current stress using /spl Delta/G/sub mp/ = -20% as the failure criteria. The difference of reliability performance between 0.07-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with pseudomorphic In/sub 0.75/Ga/sub 0.25/As channel and 0.1-/spl mu/m InGaAs-InAlAs-InP HEMT MMICs with In/sub 0.6/Ga/sub 0.4/As channel is also discussed. The achieved high-reliability result demonstrates a robust 0.07-/spl mu/m pseudomorphic InGaAs-InAlAs-InP HEMT MMICs production technology for G-band applications.     

Threshold voltage of submicron Ga/sub 0.47/In/sub 0.53/As HIGFETs

Presents threshold voltage data for Al/sub 0.48/In/sub 0.52/As/Ga/sub 0.47/In/sub 0.53/As/InP heterostructure insulated gate FETs (HIGFETs) with gate lengths from 1.2 mu m to 0.4 mu m. The refractory-gate, self-aligned fabrication process was applied to MBE-grown structures with 300 AA Ga/sub 0.47/In/sub 0.53/As channels and semi-insulating superlattice buffers to achieve sharp pinchoff with excellent threshold uniformity. HIGFETs with L/sub g/=1.2 mu m showed a threshold voltage of -0.076+or-0.019 V, making them well-suited to application in direct-coupled FET logic (DCFL) circuits.<>     

Temperature dependence of breakdown and avalanche multiplication in In/sub 0.53/Ga/sub 0.47/As diodes and heterojunction bipolar transistors

The avalanche multiplication and impact ionization coefficients in In/sub 0.53/Ga/sub 0.47/As p-i-n and n-i-p diodes over a range of temperature from 20-400 K were measured and shown to have negative temperature dependence. This is contrary to the positive temperature dependence of the breakdown voltage measured on InP/In/sub 0.53/Ga/sub 0.47/As heterojunction bipolar transistors (HBTs) in this and previous works. It is shown that the collector-base dark current and current gain can be the overriding influence on the temperature dependence of breakdown in InP/In/sub 0.53/Ga/sub 0.47/As HBTs and could explain previous anomalous interpretations from the latter.     

Submicron-gate ion-implanted In/sub 0.15/Ga/sub 0.85/As/GaAs MESFETs with graded indium composition

0.25 mu m and 0.5 mu m gate ion-implanted MESFETs have been fabricated on In/sub 0.15/Ga/sub 0.85/As epitaxial layers. These layers are grown by MOCVD on three inch diameter GaAs substrates with the indium mole fraction graded from 15% at the InGaAs/GaAs heterointerface to 0% at the surface. Both devices show excellent DC and microwave performance. From S-parameter measurements, extrinsic current gain cutoff frequencies f/sub t/ of 120 and 61 GHz are obtained for the 0.25 mu m and 0.5 mu m gate MESFETs, respectively. The authors investigate the potential of small-bandgap InGaAs materials for submicron-gate MESFET applications.<>     

InGaAs/InP DHBTs with 120-nm collector having simultaneously high f/sub /spl tau//, f/sub max//spl ges/450 GHz

InP/In/sub 0.53/Ga/sub 0.47/As/InP double heterojunction bipolar transistors (DHBT) have been designed for increased bandwidth digital and analog circuits, and fabricated using a conventional mesa structure. These devices exhibit a maximum 450 GHz f/sub /spl tau// and 490 GHz f/sub max/, which is the highest simultaneous f/sub /spl tau// and f/sub max/ for any HBT. The devices have been scaled vertically for reduced electron collector transit time and aggressively scaled laterally to minimize the base-collector capacitance associated with thinner collectors. The dc current gain /spl beta/ is /spl ap/ 40 and V/sub BR,CEO/=3.9 V. The devices operate up to 25 mW//spl mu/m/sup 2/ dissipation (failing at J/sub e/=10 mA//spl mu/m/sup 2/, V/sub ce/=2.5 V, /spl Delta/T/sub failure/=301 K) and there is no evidence of current blocking up to J/sub e//spl ges/12 mA//spl mu/m/sup 2/ at V/sub ce/=2.0 V from the base-collector grade. The devices reported here employ a 30-nm highly doped InGaAs base, and a 120-nm collector containing an InGaAs/InAlAs superlattice grade at the base-collector junction.