Wideband LNA Compatible for Differential and Single-Ended Inputs

This letter presents a wideband low-noise amplifier (LNA) that supports both differential and single-ended inputs, while providing differential output. The LNA is implemented in 0.13 $mu{rm m}$ CMOS technology. For sub-1 GHz wideband applications, this LNA achieves 22.5 dB voltage gain, ${+ 1}~{rm dBm}$ IIP3, and 2.5 dB NF in the differential receiving mode, while achieving 23 dB voltage gain, ${- 0.5}~{rm dBm}$ IIP3, and 2.65 dB NF in the single-ended receiving mode. The LNA core circuit draws 2.5 mA from 1.2 V supply voltage, and occupies a small chip area of 0.06 ${rm mm}^{2}$.      

A Linearization Technique for RF Receiver Front-End Using Second-Order-Intermodulation Injection

A linearization technique is proposed in which low-frequency second-order-intermodulation $({rm IM}_{2})$ is generated and injected to suppress the third-order intermodulation $({rm IM}_{3})$. The proposed linearization technique is applied to both a low-noise amplifier (LNA) and a down-conversion mixer in an RF receiver front-end (RFE) working at 900 MHz. Fabricated in a 0.18$ mu{hbox{m}}$ CMOS process and operated at 1.5 V supply with a total current of 13.1 mA, the RFE delivers 22 dB gain with 5.3 dB noise figure (NF). The linearization technique achieves around 20 dB ${rm IM}_{3}$ suppression and improves the RFE's ${rm IIP}_{3}$ from $-$ 10.4 dBm to 0.2 dBm without gain reduction and noise penalty while requiring only an extra current of 0.1 mA.      

A 2.4-GHz Resistive Feedback LNA in 0.13-$mu$m CMOS

A $g_{m}$-boosted resistive feedback low-noise amplifier (LNA) using a series inductor matching network and its application to a 2.4 GHz LNA is presented. While keeping the advantage of easy and reliable input matching of a resistive feedback topology, it takes an extra advantage of $g_{m}$ -boosting as in inductively degenerated topology. The gain of the LNA increases by the $Q$ -factor of the series RLC input network, and its noise figure (NF) is reduced by a similar factor. By exploiting the $g_{m}$-boosting property, the proposed fully integrated LNA achieves a noise figure of 2.0 dB, S21 of 24 dB, and IIP3 of ${- 11}~ hbox{dBm}$ while consuming 2.6 mW from a 1.2 V supply, and occupies 0.6 ${hbox {mm}}^{2}$ in 0.13-$mu{hbox {m}}$ CMOS, which provides the best figure of merit. This paper also includes an LNA of the same topology with an external input matching network which has an NF of 1.2 dB.      

A 0.13 $mu$ m CMOS Quad-Band GSM/GPRS/EDGE RF Transceiver Using a Low-Noise Fractional-N Frequency Synthesizer and Direct-Conversion Architecture

This paper presents a single-chip CMOS quad-band (850/900/1800/1900 MHz) RF transceiver for GSM/GPRS/EDGE applications which adopts a direct-conversion receiver, a direct-conversion transmitter and a fractional-N frequency synthesizer with a built-in DCXO. In the GSM mode, the transmitter delivers 4 dBm of output power with 1$^{circ}$ RMS phase error and the measured phase noise is ${-}$164.5 dBc/Hz at 20 MHz offset from a 914.8$~$MHz carrier. In the EDGE mode, the TX RMS EVM is 2.4% with a 0.5 $~$dB gain step for the overall 36 dB dynamic range. The RX NF and IIP3 are 2.7 dB/ ${-}$12 dBm for the low bands (850/900 MHz) and 3 dB/${-}$ 11 dBm for the high bands (1800/1900 MHz). This transceiver is implemented in 0.13 $mu$m CMOS technology and occupies 10.5 mm$^{2}$ . The device consumes 118 mA and 84 mA in TX and RX modes from 2.8 V, respectively and is housed in a 5$,times,$ 5 mm$^{2}$ 40-pin QFN package.      

The Blixer, a Wideband Balun-LNA-I/Q-Mixer Topology

This paper proposes to merge an I/Q current-commutating mixer with a noise-canceling balun-LNA. To realize a high bandwidth, the real part of the impedance of all RF nodes is kept low, and the voltage gain is not created at RF but in baseband where capacitive loading is no problem. Thus a high RF bandwidth is achieved without using inductors for bandwidth extension. By using an I/Q mixer with 25% duty-cycle LO waveform the output IF currents have also 25% duty-cycle, causing 2 times smaller DC-voltage drop after IF filtering. This allows for a 2 times increase in the impedance level of the IF filter, rendering more voltage gain for the same supply headroom. The implemented balun-LNA-I/Q-mixer topology achieves $> ,$18 dB conversion gain, a flat noise figure $≪, $5.5 dB from 500 MHz to 7 GHz, IIP2$ ={+}$20 dBm and IIP3 $={-}$3 dBm. The core circuit consumes only 16 mW from a 1.2 V supply voltage and occupies less than ${hbox{0.01~mm}}^{2}$ in 65 nm CMOS.      

A $Q$ -Band Four-Element Phased-Array Front-End Receiver With Integrated Wilkinson Power Combiners in 0.18-$mu{{hbox{m}}}$ SiGe BiCMOS Technology

A four-element phased-array front-end receiver based on 4-bit RF phase shifters is demonstrated in a standard 0.18- $mu{{hbox{m}}}$ SiGe BiCMOS technology for $Q$-band (30–50 GHz) satellite communications and radar applications. The phased-array receiver uses a corporate-feed approach with on-chip Wilkinson power combiners, and shows a power gain of 10.4 dB with an ${rm IIP}_{3}$ of $-$13.8 dBm per element at 38.5 GHz and a 3-dB gain bandwidth of 32.8–44 GHz. The rms gain and phase errors are $leq$1.2 dB and $leq {hbox{8.7}}^{circ}$ for all 4-bit phase states at 30–50 GHz. The beamformer also results in $leq$ 0.4 dB of rms gain mismatch and $leq {hbox{2}}^{circ}$ of rms phase mismatch between the four channels. The channel-to-channel isolation is better than $-$35 dB at 30–50 GHz. The chip consumes 118 mA from a 5-V supply voltage and overall chip size is ${hbox{1.4}}times {hbox{1.7}} {{hbox{mm}}}^{2}$ including all pads and CMOS control electronics.      

W-Band Active Down-Conversion Mixer in Bulk CMOS

A W-band (76–77 GHz) active down-conversion mixer has been demonstrated using low leakage (higher ${rm V}_{{rm T}}$) NMOS transistors of a 65-nm digital CMOS process with 6 metal levels. It achieves conversion gain of ${-}8$ dB at 76 GHz with a local oscillation power of 4 dBm (${sim-}2$ dBm after de-embedding the on-chip balun loss), and 3 dB bandwidth of 3 GHz. The SSB noise figures are 17.8–20 dB (11.3–13.5 dB after de-embedding on-chip input balun loss) between 76 and 77 GHz. ${rm IP}_{1{rm dB}}$ is ${-}6.5$ dBm and IIP3 is 2.5 dBm (${sim-}13$ and ${sim}-4$ dBm after de-embedding the on-chip balun loss). The mixer consumes 5 mA from a 1.2 V supply.      

A 1 V 23 GHz Low-Noise Amplifier in 45 nm Planar Bulk-CMOS Technology With High-$Q$ Above-IC Inductors

A 23 GHz electrostatic discharge-protected low-noise amplifier (LNA) has been designed and implemented by 45 nm planar bulk-CMOS technology with high-$Q$ above-IC inductors. In the designed LNA, the structure of a one-stage cascode amplifier with source inductive degeneration is used. All high- $Q$ above-IC inductors have been implemented by thin-film wafer-level packaging technology. The fabricated LNA has a good linearity where the input 1 dB compression point $({rm IP}_{{-}1~{rm dB}})$ is ${- 9.5}~{rm dBm}$ and the input referred third-order intercept point $(P _{rm IIP3})$ is ${+ 2.25}~{rm dBm}$. It is operated with a 1 V power supply drawing a current of only 3.6 mA. The fabricated LNA has demonstrated a 4 dB noise figure and a 7.1 dB gain at the peak gain frequency of 23 GHz, and it has the highest figure-of-merit. The experimental results have proved the suitability of 45 nm gate length bulk-CMOS devices for RF ICs above 20 GHz.      

A Wideband CMOS Low Noise Amplifier Employing Noise and IM2 Distortion Cancellation for a Digital TV Tuner

A wideband CMOS low noise amplifier (LNA) with single-ended input and output employing noise and IM2 distortion cancellation for a digital terrestrial and cable TV tuner is presented. By adopting a noise canceling structure combining a common source amplifier and a common gate amplifier by current amplification, the LNA obtains a low noise figure and high IIP3. IIP2 as well as IIP3 of the LNA is important in broadband systems, especially digital terrestrial and cable TV applications. Accordingly, in order to overcome the poor IIP2 performance of conventional LNAs with single-ended input and output and avoid the use of external and bulky passive transformers along with high sensitivity, an IM2 distortion cancellation technique exploiting the complementary RF performance of NMOS and PMOS while retaining thermal noise canceling is adopted in the LNA. The proposed LNA is implemented in a 0.18 $muhbox{m}$ CMOS process and achieves a power gain of 14 dB, an average noise figure of 3 dB, an IIP3 of 3 dBm, an IIP2 of 44 dBm at maximum gain, and S11 of under ${- 9}~{rm dB}$ in a frequency range from 50 MHz to 880 MHz. The power consumption is 34.8 mW at 2.2 V and the chip area is 0.16 ${rm mm}^{2}$.      

A Highly Linear SAW-Less CMOS Receiver Using a Mixer With Embedded Tx Filtering for CDMA

An embedded filtering passive (EFP) mixer is used to overcome transmitter power leakage in a receiver without the use of a SAW filter. The receiver IC exhibits more than ${+}$ 60 dBm of Rx IIP$_{2}$ , 2.4 dB Rx noise figure, and ${+}$77 dB of Triple Beat (TB) with 45 MHz offset transmit leakage at 900 MHz Rx frequency while consuming only 18 mA from a 2.1 V supply. Thanks to the embedded filtering passive mixer, the proposed receiver IC shows an additional 15 dB Tx rejection compared to a conventional receiver. The additional Tx rejection improved the IIP $_{2}$ by 10 dB and TB by 30 dB. The complete receiver consists of a differential LNA employing an active post-distortion (APD), I/Q embedded filtering passive mixer, two TIAs for I/Q outputs. The fabricated receiver IC occupies 2.25 mm$^{2}$ including bonding pads, ESD devices, local oscillator (LO) input buffer, frequency divider, and mixer drivers. The receiver is fabricated using a 0.18 $mu$m CMOS process with 5 metal and 1 poly (5M1P) layer.      

A Low Voltage Mixer With Improved Noise Figure

A 5.2 GHz low voltage mixer with improved noise figure using TSMC 0.18 $mu$m CMOS technology is presented in this letter. This mixer utilizes current reuse and ac-coupled folded switching to achieve low supply voltage. The noise figure of the mixer is strongly influenced by flicker noise. A resonating inductor is implemented for tuning out the parasitic components, which not only can improve noise figure but also enhance conversion gain. A low voltage mixer without resonating technique has also been fabricated and measured for comparison. Simulated results reveal that flicker corner frequency is lowered. The measured results show 4.5 dB conversion gain enhancement and 4 dB reduction of noise figure. The down-conversion mixer with resonating inductor achieves 5.8 dB conversion gain, ${-}16$ dBm ${rm P}_{{rm 1dB}},$ ${-}6$ dBm ${rm IIP}_{3}$ at power consumption of 3.8 mW and 1 V supply voltage.      

A Single-Ended Fully Integrated SiGe 77/79 GHz Receiver for Automotive Radar

A single-ended 77/79 GHz monolithic microwave integrated circuit (MMIC) receiver has been developed in SiGe HBT technology for frequency-modulated continuous-wave (FMCW) automotive radars. The single-ended receiver chip consists of the first reported SiGe 77/79 GHz single-ended cascode low noise amplifier (LNA), the improved single-ended RF double-balanced down-conversion 77/79 GHz micromixer, and the modified differential Colpitts 77/79 GHz voltage controlled oscillator (VCO). The LNA presents 20/21.7 dB gain and mixer has 13.4/7 dB gain at 77/79 GHz, and the VCO oscillates from 79 to 82 GHz before it is tuned by cutting the transmission line ladder, and it centres around 77 GHz with a tuning range of 3.8 GHz for the whole ambient temperature variation range from $- hbox{40},^{circ}{hbox{C}}$ to $+ hbox{125},^{circ}{hbox{C}}$ after we cut the lines by tungsten-carbide needles. Phase noise is $-$90 dBc/Hz@1 MHz offset. Differential output power delivered by the VCO is 5 dBm, which is an optimum level to drive the mixer. The receiver occupies 0.5 ${hbox{mm}}^{2}$ without pads and 1.26 ${hbox{mm}}^{2}$ with pads, and consumes 595 mW. The measurement of the whole receiver at 79 GHz shows 20–26 dB gain in the linear region with stable IF output signal. The input ${rm P}_{rm 1dB}$ of the receiver is $-$35 dBm.      

A Dual-Band Self-Oscillating Mixer for -Band and -Band Applications

A self-oscillating mixer that employs both the fundamental and harmonic signals generated by the oscillator subcircuit in the mixing process is experimentally demonstrated. The resulting circuit is a dual-band down-converting mixer that can operate in $C$ -band from 5.0 to 6.0 GHz, or in $X$-band from 9.8 to 11.8 GHz. The oscillator uses active superharmonic coupling to enforce the quadrature relationship of the fundamental outputs. Either the fundamental outputs of the oscillator or the second harmonic oscillator output signals that exists at the common-mode nodes are connected to the mixer via a set of complementary switches. The mixer achieves a conversion gain between 5–12 dB in both frequency bands. The output 1-dB compression points for both modes of the mixer are approximately $-{hbox{5 dBm}}$ and the output third-order intercept point for $C$ -band and $X$ -band operation are 12 and 13 dBm, respectively. The integrated circuit was fabricated in 0.13-$mu {hbox{m}}$ CMOS technology and measures ${hbox{0.525 mm}}^{2}$ including bonding pads.      

Design and Analysis of a 0.8–77.5-GHz Ultra-Broadband Distributed Drain Mixer Using 0.13-$mu$m CMOS Technology

A compact and broadband 0.8–77.5-GHz passive distributed drain mixer using standard 0.13-$mu$ m CMOS technology is presented in this paper. To extend the operation bandwidth, a uniform distributed topology is utilized for wideband matching. This paper also analyzes the device size and number of stages for the bandwidth of the CMOS distributed drain mixer. To optimize the conversion gain performance of the CMOS drain mixer, a gate bias optimization method is proposed and successfully implemented in the mixer design. This mixer consumes zero dc power and exhibits a measured conversion loss of ${hbox{5.5}} pm {hbox{1}}$ dB from 0.8 to 77.5 GHz with a compact size of 0.67$,times,$ 0.58 mm$^{2}$ . The output 1-dB compression point is ${-}{hbox{8.5}}$ dBm at 20 GHz. To best of our knowledge, this monolithic microwave integrated circuit has the widest operation bandwidth among CMOS wideband mixers to date with good conversion efficiency and zero dc power consumption.      

Analysis, Design, and $X$-Band Implementation of a Self-Biased Active Feedback $G_{m}$ -Boosted Common-Gate CMOS LNA

This paper explores the use of active feedback to boost the transconductance of a common-gate (CG) low-noise amplifier and achieve simultaneous low noise and input power match. Unlike transformer coupled topologies, the CG input stage is dc-coupled to a self-biased common-source feedback amplifier (for $g_{m}$ boosting), thus eliminating the need of external bias circuitry. Noise and intermodulation analysis with and without $g_{m}$ boosting are extensively studied yielding closed-form expressions of the noise figure (NF) and third-order input-referred intercept point (IIP3) that are useful for circuit design and optimization. A 9.6-GHz differential prototype implemented in a 0.18-$mu$ m technology using only NMOS transistors, achieves a minimum NF of 4 dB, an IIP3 of ${-}$ 11.3 dBm, a return loss of ${-}$ 17 dB, and a transducer gain of 18 dB while dissipating 10 m (excluding buffer circuit) from a 1.8-V supply voltage. The active chip area is 0.11 $mu$m $^{2}$.      

A 24 GHz Amplitude Monopulse Comparator in 0.13 $mu$m CMOS

This letter presents the design and implementation of a wideband 24 GHz amplitude monopulse comparator in 0.13 $mu$m CMOS technology. The circuit results in 9.6 dB gain in the sum channel at 24 GHz with a 3-dB bandwidth of 23.0–25.2 GHz, and a sum/difference ratio of $> 25$ dB at 20–26 GHz. The measured input P1 dB is ${-}14.4$ dBm at 24 GHz. The chip is only 0.55$,times,$ 0.50 mm$^{2}$ (without pads) and consumes 44 mA from a 1.5 V supply, including the input active baluns and the differential to single-ended output stages (28 mA without the input and output stages). To our knowledge, this is the first demonstration of a high performance mm-wave CMOS monopulse comparator RFIC.      

A 2.4–2.5 GHz WLAN Direct-Conversion Receiver Front-End With Low-Distortion Baseband Filters

Low-distortion I/Q baseband filters interface with a 2.5 GHz RF receiver front-end configured as a Gm-cell in a direct-conversion architecture targeted towards WLAN 802.11b application. The active I/Q current-mode filters use AC current to carry the large swing of both desired and blocker signals, relaxing the voltage headroom requirement to a 1.2 V supply. An on chip master–slave automatic tuner is used to lock the filter bandwidth to a precision 20 MHz reference crystal oscillator, resulting in a $≪ ,$3% tuning accuracy and $≪, $ 0.5% I/Q bandwidth matching. The receiver achieves a 3.2 dB DSB NF, ${-}$14 dBm out-of-band IIP3, and ${+}$ 27 dBm worst case IIP2, all referred to the LNA input, while drawing 30mA from a 2.7 V supply. The chip is fabricated in a 0.5 $mu$m 46 GHz $f_{T}$ SiGe BiCMOS process. The active area is 2.54 mm$^{2}$ .      

Q-Band pHEMT and mHEMT Subharmonic Gilbert Upconversion Mixers

This letter makes a comparison between Q-band 0.15 $mu{rm m}$ pseudomorphic high electron mobility transistor (pHEMT) and metamorphic high electron mobility transistor (mHEMT) stacked-LO subharmonic upconversion mixers in terms of gain, isolation and linearity. In general, a 0.15 $mu{rm m}$ mHEMT device has a higher transconductance and cutoff frequency than a 0.15 $mu{rm m}$ pHEMT does. Thus, the conversion gain of the mHEMT is higher than that of the pHEMT in the active Gilbert mixer design. The Q-band stacked-LO subharmonic upconversion mixers using the pHEMT and mHEMT technologies have conversion gain of $-$7.1 dB and $-$0.2 dB, respectively. The pHEMT upconversion mixer has an ${rm OIP}_{3}$ of $-$12 dBm and an ${rm OP}_{1 {rm dB}}$ of $-$24 dBm, while the mHEMT one shows a 4 dB improvement on linearity for the difference between the ${rm OIP}_{3}$ and ${rm OP}_{1 {rm dB}}$. Both the chip sizes are the same at 1.3 mm $times$ 0.9 mm.      

A 30–100 GHz Wideband Sub-Harmonic Active Mixer in 90 nm CMOS Technology

This letter presents a 30–100 GHz wideband and compact fully integrated sub-harmonic Gilbert-cell mixer using 90 nm standard CMOS technology. The sub-harmonic pumped scheme with advantages of high port isolation and low local oscillation frequency operation is selected in millimeter-wave mixer design. A distributed transconductance stage and a high impedance compensation line are introduced to achieve the flatness of conversion gain over broad bandwidth. The CMOS sub-harmonic Gilbert-cell mixer exhibits ${-}{hbox{1.5}} pm {hbox{1.5}}$ dB measured conversion gain from 30 to 100 GHz with a compact chip size of 0.35 mm$^{2}$. The OP$_{1 {rm dB}}$ of the mixer is ${-}$ 10.4 dBm and ${-}$9.6 dBm at 77 and 94 GHz, respectively. To the best of our knowledge, the monolithic microwave integrated circuit is the first CMOS Gilbert-cell mixer operating up to 100 GHz.      

Analysis and Design of a CMOS UWB LNA With Dual- -Branch Wideband Input Matching Network

A wideband low-noise amplifier (LNA) based on the current-reused cascade configuration is proposed. The wideband input-impedance matching was achieved by taking advantage of the resistive shunt–shunt feedback in conjunction with a parallel LC load to make the input network equivalent to two parallel $RLC$-branches, i.e., a second-order wideband bandpass filter. Besides, both the inductive series- and shunt-peaking techniques are used for bandwidth extension. Theoretical analysis shows that both the frequency response of input matching and noise figure (NF) can be described by second-order functions with quality factors as parameters. The CMOS ultra-wideband LNA dissipates 10.34-mW power and achieves ${ S}_{11}$ below $-$8.6 dB, ${ S}_{22}$ below $-$10 dB, ${ S}_{12}$ below $-$26 dB, flat ${ S}_{21}$ of 12.26 $pm$ 0.63 dB, and flat NF of 4.24 $ pm$ 0.5 dB over the 3.1–10.6-GHz band of interest. Besides, good phase linearity property (group-delay variation is only $pm$22 ps across the whole band) is also achieved. The analytical, simulated, and measured results agree well with one another.