Enhanced Photocatalytic Activity of Two-Pot-Synthesized BiFeO<Subscript>3</Subscript>–ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Heterojunction Nanocomposite

BiFeO₃–ZnFe₂O₄ heterojunction nanocomposites have been produced by a chemical synthesis method using one- and two-pot approaches. X-ray diffraction patterns of as-calcined samples indicated formation of pure zinc ferrite (ZnFe₂O₄) and bismuth ferrite (BiFeO₃) phases, each retaining its crystal structure. Diffuse reflectance spectrometry was applied to calculate the optical bandgap of the photocatalysts, revealing values in the range from 2.03 eV to 2.17 eV, respectively. The maximum photodegradation of methylene blue of about 97% was achieved using two-pot-synthesized photocatalyst after 120 min of visible-light irradiation due to the higher probability of charge separation of photogenerated electron–hole pairs in the heterojunction structure. Photoluminescence spectra showed lower emission intensity of two-pot-synthesized photocatalyst, due to its lower recombination rate originating from greater charge separation.     

Superconducting quantum interference devices based on YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7–<Emphasis Type="Italic">x</Emphasis> </Subscript> films for nondestructive testing

Original superconducting quantum interference devices (SQUIDs) with a working temperature of 77 K based on high-temperature superconducting (HTSC) YBa₂Cu₃O_7–x films can be used for the measurement systems of nondestructive testing using magnetic and eddy-current methods. A dynamic range of 120 dB with respect to the amplitude of the measured signal and a spatial resolution of about 10 µm are reached for the measurement system with the HTSC SQUID in which a receiving loop with a size of 50 µm is placed at a distance of about 0.3 mm from the room-temperature object under study. The sensitivity with respect to magnetic field (4 fT/ \(\sqrt {Hz} \) at a temperature of 77 K) of the HTSC SQUID magnetometer with multilayer superconducting flux transformer is sufficient for applications in biomagnetic measurements in magnetocardiography and magnetoencephalography. HTSC SQUID gradiometers with multilayer superconducting flux transformers exhibit stable operation in magnetically unshielded space at a sensitivity of 15 fT/cm \(\sqrt {Hz} \) with respect to the gradient of magnetic field at 77 K. Such a sensitivity is sufficient for the detection of single magnetic particles with a size of about 10 µm at a distance of about 15 mm.     

Improved Thermoelectric Performance and Mechanical Properties of Nanostructured Melt-Spun <Emphasis Type="Italic">β</Emphasis>-Zn<Subscript>4</Subscript>Sb<Subscript>3</Subscript>

β-Zn₄Sb₃ is one of the most important thermoelectric materials in the intermediate temperature range, but poor mechanical properties limit its commercial application. In this work we adopted a melt-spinning (MS) technique followed by a quick spark plasma sintering (SPS) procedure to fabricate nanostructured β-Zn₄Sb₃ bulk material with good thermoelectric performance and mechanical properties. The nanostructure had a significant influence on the thermoelectric transport properties and mechanical strength. Compared with the sample prepared by the traditional melting method (M-ingot), the Seebeck coefficient of the MS-SPS samples was significantly higher and the thermal conductivity was remarkably lower. In spite of the lower electrical conductivity, the σ/κ ratio increased in the high temperature range, leading to great improvement in the thermoelectric figure of merit (ZT). The maximum ZT value of 1.16 was obtained at 700 K for the MS-SPS-40 sample. Compared with the M-ingot sample, it was 47% higher at the same temperature. Moreover, the average compressive strength of the MS-SPS-40 sample reached 337.9 MPa, which is 130% higher than that of the M-ingot sample. β-Zn₄Sb₃ with such high mechanical strength has great potential for commercial application.     

Conductivity of Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–GaAs Heterojunctions

The effect of annealing in argon at temperatures of T_an = 700–900°C on the I–V characteristics of metal–Ga₂O₃–GaAs structures is investigated. Samples are prepared by the thermal deposition of Ga₂O₃ powder onto GaAs wafers with a donor concentration of N _d = 2 × 10¹⁶ cm^–3. To measure theI–V characteristics, V/Ni metal electrodes are deposited: the upper electrode (gate) is formed on the Ga₂O₃ film through masks with an area of S _k = 1.04 × 10^–2 cm² and the lower electrode in the form of a continuous metallic film is deposited onto GaAs. After annealing in argon at T_an ≥ 700°C, the Ga₂O₃-n-GaAs structures acquire the properties of isotype n-heterojunctions. It is demonstrated that the conductivity of the structures at positive gate potentials is determined by the thermionic emission from GaAs to Ga₂O₃. Under negative biases, current growth with an increase in the voltage and temperature is caused by field-assisted thermal emission in gallium arsenide. In the range of high electric fields, electron phonon-assisted tunneling through the top of the potential barrier is dominant. High-temperature annealing does not change the electron density in the oxide film, but affects the energy density of surface states at the GaAs–Ga₂O₃ interface.     

Single-Crystal NdBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7–<Emphasis Type="Italic">x</Emphasis></Subscript> Films for Microwave Electronics

The growth of single-crystal films of high-temperature superconductors of the NdBa₂Cu₃O_7–x composition with a thickness of 1–1.5 μm on Al₂O₃ + CeO₂ substrates during the laser spraying is investigated. Technological conditions of the epitaxial growth of the films with a temperature of superconducting transition of 95 K and a critical current of more than 10⁶ A/cm² at the temperature of liquid nitrogen are determined. It is shown that the structure of fabricated NdBa₂Cu₃O_7–x films is more perfect and homogeneous than the structure of YBa₂Cu₃O_7–x films widely used in microwave electronics.     

Photoluminescence and excitation features of Nd<Superscript>3+</Superscript> ions in (La<Subscript>0.97</Subscript>Nd<Subscript>0.03</Subscript>)<Subscript>2</Subscript>S<Subscript>3</Subscript> · 2Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

A combined study of the spectral photoluminescence distribution and excitation spectra of photoluminescence in La₂S₃ · 2Ga₂O₃ and (La_0.97Nd_0.03)₂S₃ · 2Ga₂O₃ glasses, along with the study of the transmission spectra of these glasses, was carried out. The radiative channel was ascertained to be the main channel for the energy transfer from the host matrix to the Nd³⁺ ions upon excitation of the glasses with light at a wavelength of the fundamental absorption band. Oxygen centers with the level E _c -2.0 eV act as sensitizing agents. The structural disordering of the glass host increases the variance in the magnitude of splitting of the multiplet levels from the 4f electronic states of the Nd³⁺ ion. This promotes nonradiative relaxation of the electrons from excited states to the laser ⁴F_3/2 level. The (La_0.97Nd_0.03)₂S₃ · 2Ga₂O₃ glasses can be considered as promising laser materials for obtaining the stimulated emission of radiation of Nd³⁺ ions under an optical pump in the range of the fundamental absorption band of the glass.     

Controlled Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag Core–Shell Composite Nanoparticles with High Electrical Conductivity

The presented method provides an easy processing route to synthesize Fe₃O₄/Ag core–shell composite nanoparticles. Their structures were characterized by x-ray diffraction and transmission electron microscopy. The average size of the Fe₃O₄ core and Ag shell was about 32.0 nm and 5.0 nm (or 28.0 nm), respectively. Furthermore, magnetic measurements showed that the composite nanoparticles exhibited typical superparamagnetic behavior, specific saturation magnetization of ca. 24.0 emu/g, and intrinsic coercivity of 106.0 Oe. At the same time, high conductivity (64.7 S/cm) of the composite nanoparticles was also observed. This method provides an opportunity to synthesize other core–shell (Fe₃O₄) nanoparticles in a single step.     

The modification of BaCe<Subscript>0.5</Subscript>Zr<Subscript>0.3</Subscript>Y<Subscript>0.2</Subscript>O<Subscript>3–δ</Subscript> with copper oxide: Effect on the structural and transport properties

The effect of the content of CuO additive on the sinterability, phase composition, microstructure, and electrical properties of BaCe_0.5Zr_0.3Y_0.2O_3–δ proton-conducting material is studied. Ceramic samples were produced by the citrate–nitrate synthesis method with the addition of 0, 0.25, 0.5, and 1% CuO. It is shown that the relative density of the samples containing 0.5 and 1% CuO is higher than 94% at a sintering temperature of 1450°C, whereas the relative density of the material is no higher than 85% at a lower content of the sintering additive. From the data of X-ray diffraction analysis and scanning electron microscopy, it is established that the introduction of a small CuO content (0.25%) is inadequate for single-phase and high-dense ceramics to be formed. The conductivity and scanning electron microscopy data show that the sample with BaCe_0.5Zr_0.3Y_0.2O_3–δ + 0.5% CuO composition possesses high total and ionic conductivities as well as a high degree of microstructural stability after hydrogen reduction of the ceramics. The citrate–nitrate method modified by the introduction of a small CuO content can be recommended for the production of single-phase, gas-tight, and high-conductivity electrolytes based on both BaCeO₃ and BaZrO₃.     

Free-Standing β-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> Thin Diaphragms

Free-standing, very thin, single-crystal β-gallium oxide (β-Ga₂O₃) diaphragms have been constructed and their dynamical mechanical properties characterized by noncontact, noninvasive optical measurements harnessing the multimode nanomechanical resonances of these suspended nanostructures. We synthesized single-crystal β-Ga₂O₃ using low-pressure chemical vapor deposition (LPCVD) on a 3C-SiC epilayer grown on Si substrate at temperature of 950°C for 1.5 h. The synthesized single-crystal nanoflakes had widths of ～ 2 μm to 30 μm and thicknesses of ～ 20 nm to 140 nm, from which we fabricated free-standing circular drumhead β-Ga₂O₃ diaphragms with thicknesses of ～ 23 nm to 73 nm and diameters of ～ 3.2 μm and ～ 5.2 μm using a dry stamp-transfer technique. Based on measurements of multiple flexural-mode mechanical resonances using ultrasensitive laser interferometric detection and performing thermal annealing at 250°C for 1.5 h, we quantified the effects of annealing and adsorption of atmospheric gas molecules on the resonant characteristics of the diaphragms. Furthermore, we studied the effects of structural nonidealities on these free-standing β-Ga₂O₃ nanoscale diaphragms. We present extensive characterization of the mechanical and optical properties of free-standing β-Ga₂O₃ diaphragms, paving the way for realization of resonant transducers using such nanomechanical structures for use in applications including gas sensing and ultraviolet radiation detection.     

Preparation and Ferroelectric Properties of Ho<Superscript>3+</Superscript>/Mo<Superscript>6+</Superscript> Cosubstituted Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> Thin Films by Sol–Gel Method

We have prepared Ho³⁺/Mo⁶⁺ cosubstituted bismuth titanate [(Bi_3.6Ho_0.4)_3.99- Ti_2.985Mo_0.015O₁₂, BHTM] thin films on Pt/Ti/SiO₂/Si substrates using the sol–gel method. The crystal structure and morphology of the BHTM films were characterized. The BHTM samples show a single phase of Bi-layered Aurivillius structure and a dense microstructure. The dielectric constant and dielectric loss of the BHTM films were about 359 and 0.043, respectively, at a frequency of 1 MHz. The films exhibit 2P _r of 57.7 μC/cm² and 2E _c of 290.0 kV/cm at an applied field of 470 kV/cm, and have fatigue-free characteristics. They also showed good insulating behavior according to leakage current testing.     

Composites Based on Core–Shell Structured HBCuPc@CNTs-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> and Polyarylene Ether Nitriles with Excellent Dielectric and Mechanical Properties

Core–shell structured magnetic carbon nanotubes (CNTs-Fe₃O₄) coated with hyperbranched copper phthalocyanine (HBCuPc) (HBCuPc@CNTs-Fe₃O₄) hybrids were prepared by the solvent-thermal method. The results indicated that the HBCuPc molecules were decorated on the surface of CNTs-Fe₃O₄ through coordination behavior of phthalocyanines, and the CNTs-Fe₃O₄ core was completely coaxial wrapped by a functional intermediate HBCuPc shell. Then, polymer-based composites with a relatively high dielectric constant and low dielectric loss were fabricated by using core–shell structured HBCuPc@CNTs-Fe₃O₄ hybrids as fillers and polyarylene ether nitriles (PEN) as the polymer matrix. The cross-sectional scanning electron microscopy (SEM) images of composites showed that there is almost no agglomeration and internal delamination. In addition, the rheological analysis reveals that the core–shell structured HBCuPc@CNTs-Fe₃O₄ hybrids present better dispersion and stronger interface adhesion with the PEN matrix than CNTs-Fe₃O₄, thus resulting in significant improvement of the mechanical, thermal and dielectric properties of polymer-based composites.     

Good Thermal Stability,High Permittivity,Low Dielectric Loss and Chemical Compatibility with Silver Electrodes of Low-Fired BaTiO<Subscript>3</Subscript>–Bi(Cu<Subscript>0.75</Subscript>W<Subscript>0.25</Subscript>)O<Subscript>3</Subscript> Ceramics

(1 ? x)BaTiO₃–xBi(Cu_0.75W_0.25)O₃ [(1 ? x)BT–xBCW, 0 ≤ x ≤ 0.04] perovskite solid solutions ceramics of an X8R-type multilayer ceramic capacitor with a low sintering temperature (900°C) were synthesized by a conventional solid state reaction technique. Raman spectra and x-ray diffraction analysis demonstrated that a systematically structural evolution from a tetragonal phase to a pseudo-cubic phase appeared near 0.03 < x < 0.04. X-ray photoelectron analysis confirmed the existence of Cu⁺/Cu²⁺ mixed-valent structure in 0.96BT–0.04BCW ceramics. 0.96BT–0.04BCW ceramics sintered at 900°C showed excellent temperature stability of permittivity (Δε/ε _25°C ≤ ±15%) and retained good dielectric properties (relative permittivity ～1450 and dielectric loss ≤2%) over a wide temperature range from 25°C to 150°C at 1 MHz. Especially, 0.96BT–0.04BCW dielectrics have good compatibility with silver powders. Dielectric properties and electrode compatibility suggest that the developed materials can be used in low temperature co-fired multilayer capacitor applications.     

Catalyst-Free Direct Vapor-Phase Growth of Hexagonal ZnO Nanowires on <Emphasis>α</Emphasis>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

The evolution of ZnO nanowires has been studied under supersaturation of Zn metal species with and without a ZnO thin-film buffer layer on α-Al₂O₃ deposited by the pulsed laser ablation technique. The nanowires had diameters in the range of 30 nm to 50 nm and lengths in the range of 5 μm to 10 μm with clear hexagonal shape and [000[`1]] [000\bar{1}] , [10[`1]1] [10\bar{1}1] , and [10[`1]0] [10\bar{1}0] facets. X-ray diffraction (XRD) measurements indicated crystalline properties for the ZnO nanostructures grown on pulsed laser deposition (PLD) ZnO nucleation layers. The optical properties were analyzed by photoluminescence (PL) and cathodoluminescence (CL) measurements. The ZnO nanowires were found to emit strong ultraviolet (UV) light at 386 nm and weak green emission as observed by PL measurements. The stoichiometry of Zn and O was found to be close to 1 by x-ray photoelectron spectroscopy (XPS) measurements. The process-dependent growth properties of ZnO nanostructures can be harnessed for future development of nanoelectronic components including optically pumped lasers, optical modulators, detectors, electron emitters, and gas sensors.     

Magnetic Properties of Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>In<Subscript>2</Subscript>S<Subscript>4</Subscript> Alloy Single Crystals

This study concerns the magnetic properties of single crystals of Fe _x Mn_{1 − x} In₂S₄ alloys. The basically antiferromagnetic character of indirect exchange interactions between Fe²⁺ and Mn²⁺ cations is established. As the concentration of Fe²⁺ cations is increased, the magnetic ordering temperature increases from ∼12 K (x = 0) to ∼22 K (x = 1). Short-range-order ferromagnetic correlations are observed. The basic magnetic phase state of the alloys is the spin glass state, with the freezing temperature increasing from ∼5 K (x = 0) to ∼12 K (x = 1). As the external magnetic field is increased, the magnetic ordering temperature slightly decreases. The most probable causes and mechanisms of formation of the magnetic state of the alloys are discussed.     

Synthesis and Transport Properties of In<Subscript>4</Subscript>(Se<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Te<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)<Subscript>3</Subscript>

Polycrystalline samples of In₄(Se_1−x Te _x )₃ were synthesized by using a melting–quenching–annealing process. The thermoelectric performance of the samples was evaluated by measuring the transport properties from 290 K to 650 K after sintering using the spark plasma sintering (SPS) technique. The results indicate that Te substitution can effectively reduce the thermal conductivity while maintaining good electrical transport properties. In₄Te₃ shows the lowest thermal conductivity of all compositions tested.     

Synthesis and Electrical Properties of γ-Na<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Co<Subscript>2</Subscript>O<Subscript>4</Subscript> via a Citrate Sol–Gel Method with Polyethylene Glycol 400

In this work, a citrate sol–gel method (Sol–Gel) with polyethylene glycol 400 (Sol-Gel-PEG400) was developed to prepare γ-Na _x Co₂O₄ by using sodium and cobalt nitrates as the raw materials, citric acid as a complexing agent, and PEG400 as a dispersant. At 800°C, single-phase γ-Na _x Co₂O₄ crystals were obtained using Sol-Gel-PEG400. With the addition of 1 vol.% PEG400, smaller, flaky particles exhibited a well-tiled structure along the plane direction of the flaky particles. Moreover, polycrystalline sintered bulk γ-Na _x Co₂O₄ with more highly oriented crystals and greater compact density was fabricated using the Sol-Gel-PEG400 synthesized powders compared with the powders synthesized by citrate Sol–Gel. The electrical conductivity (σ) values of Sol-Gel-PEG400 samples were higher than those of Sol–Gel samples between 400 K and 900 K. The σ value of Sol-Gel-PEG400 increased to 3.13 × 10⁴ Sm⁻¹ at 400 K and to 1.84 × 10⁴ Sm⁻¹ at 900 K. Between 400 K and 850 K, the Seebeck coefficient (α) values of Sol-Gel-PEG400 samples were slightly lower than those of Sol–Gel samples. Near 900 K, the α values of these two methods were nearly equal, at 164 μV K⁻¹. Between 400 K and 900 K, the power factor (P) of Sol-Gel-PEG400 was evidently larger than that of Sol–Gel.     

Deposition of heteroepitaxial layers of topological insulator Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> in the trimethylbismuth–isopropylselenide–hydrogen system on the (0001) Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and (100) GaAs substrates

Thin solid layers that are formed upon heating of the gaseous trimethylbismuth–isopropylselenide–hydrogen system on the (0001) Al₂O₃ and singular and vicinal (100) GaAs surfaces are studied. The conditions for deposition of metal Bi and phases of Bi₄Se₃, BiSe, and topological insulator Bi₂Se₃ using the MOCVD method are determined. Pure metastable phase BiSe is obtained for the first time. Bi₂Se₃ films with a thickness of no less than 200 nm, a relatively low volume concentration of 3 ×10¹⁸ cm^–3, and a high mobility of carriers at 300 K (1000 cm² V^–1 s^–1) are fabricated.     

Thermoelectric Properties and Electronic Structure of Bi- and Ag-Doped Mg<Subscript>2</Subscript>Si<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Compounds

Mg₂Si_1−x Ge _x compounds were prepared from pure elements by melting in tantalum crucibles. The reaction was conducted under an inert gas in a special laboratory setup. Samples for thermoelectric measurements were formed by hot pressing. Structure and phase composition of the obtained materials were investigated by x-ray diffraction (XRD). Morphology and chemical composition were examined by scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS), respectively. Thermoelectric properties, i.e., the Seebeck coefficient, the electrical conductivity, and the thermal conductivity, were measured in the temperature range of 500 K to 900 K. The effect of Bi and Ag doping on the thermoelectric performance of Mg-Si-Ge ternary compounds was investigated. The electronic structures of binary compounds were calculated using the Korringa–Kohn–Rostoker (KKR) method. The effects of disorder, including Ge substitution and Bi or Ag doping, were accounted for in the KKR method with coherent potential approximation calculations. The thermoelectric properties of doped Mg₂Si_1−x Ge _x are discussed with reference to computed density of states as well as the complex energy band structure.     

Thermoelectric Properties of (Na<Subscript>1−<Emphasis Type="Italic">y</Emphasis></Subscript>M<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>)<Subscript>1.4</Subscript>Co<Subscript>2</Subscript>O<Subscript>4</Subscript> (M = Sr,Li)

Oxide thermoelectric materials (Na_1−y M _y )_1.4Co₂O₄ (M = Sr, Li; y = 0 to 0.4) were prepared by a sol–gel method. The influence of doping on the thermoelectric properties was investigated, and the phase composition was characterized by x-ray diffraction. Experimental results showed that the main crystalline phase of the undoped and Sr/Li-doped samples was γ-Na_1.4Co₂O₄. The thermoelectric properties of Na_1.4Co₂O₄ can be improved slightly by doping with Sr. Doping with Li improves the thermoelectric properties of Na_1.4Co₂O₄. For a doping fraction of y = 0.1, the electrical conductivity of (Na_1−y Li _y )_1.4Co₂O₄ at 288 K achieves its maximum value of 301.19 (Ω mm)⁻¹. The Seebeck coefficient and power factor of (Na_1−y Li _y )_1.4Co₂O₄ at 288 K achieve their maximum values of 172.28 μV K⁻¹ and 7.44 mW m⁻¹ K⁻² at a doping fraction of y = 0.4.