Note of the estimation of the Θ temperature and Ψ parameter from the critical temperature data

Summary Critical values of the polymer volume fraction _2,c and the interaction parameter _c have been computed for the case that the equation for the chemical potential of solvent contains terms _{c 2} ³ and _{c 2} ⁴ in addition to ₂ ² . For 0 _c 1/3, the limits for infinite chain length are _2,c = 0 and _c = 0.5. Quite different results are obtained for _c > 1/3, _2,c being finite and _c lower than 1/2. Conclusions for the estimation of the temperature and the entropy-of-dilution parameter are discussed.     

Molybdenum nitride for the direct decomposition of NO

The physico-chemical properties of passivated -Mo₂N have been investigated. The material showed high activities for NO direct decomposition: nearly 100% NO conversion and 95% N₂ selectivity were achieved at 450C. The amount of O₂ taken up by -Mo₂N increased with temperature rise and reached 3133.9 molg^–1 at 450C; we conclude that there formation of Mo₂O_xN_y occurred. This oxygen-saturated -Mo₂N material was catalytically active: NO conversion and N₂ selectivity were 89 and 92% at 450C. We found that by means of H₂ reduction at 450C, Mo₂O_xN_y could be reduced back to -Mo₂N and the oxidation/reduction cycle is repeatable; such a behaviour and the high oxygen capacity (3133.9 molg^–1) of -Mo₂N suggest that -Mo₂N is a promising catalytic material for automobile exhaust purification.     

Heterogeneous asymmetric reactions. 23. Enantioselective hydrogenation of ethyl pyruvate over cinchonine- and α-isocinchonine-modified platinum catalysts

The enantioselective hydrogenation of ethyl pyruvate to (S)-ethyl lactate over cinchonine- and -isocinchonine-modified Pt/Al₂O₃ catalysts was studied as a function of modifier concentration and reaction temperature. The maximum enantioselectivities obtained under the applied mild conditions were 89% ee using cinchonine (0.014 mmoldm^–3, 1 bar H₂, 23°C, 6% AcOH in toluene), and 76% ee in the case of -isocinchonine (0.14 mmoldm^–3, 1 bar H₂, –10°C, 6% AcOH in toluene). Since -isocinchonine of rigid structure exists only in anti-open conformation these data provide additional experimental evidence to support the former suggestion concerning the dominating role of anti-open conformation in these cinchona-modified enantioselective hydrogenations.     

Localization of Deformation in Copper Single Crystals During Explosive Collapse

It is established that highrate axisymmetric loading of single crystals by the method of explosive collapse of a hollow thickwalled cylinder causes deformation that involves all active closepacked slip systems. The spatial distribution of macroscopic sites of strain localization is determined by the crystallography of the active systems in singlecrystalline samples. The established correlation between the observed shear bands in the microstructure of copper single crystals and {111} active slip <110> systems of facecentered cubic (FCC) crystals and their symmetric arrangement show that deformation at a rate of 5 · 10⁴ sec^-1 occurs according to the crystalline structure of the materials.     

Ammonia synthesis over multi‐promoted iron catalysts obtained by high‐energy ball‐milling

The feasibility of producing ammonia synthesis catalysts from highenergy ballmilling of a simple mixture of the constituent oxides has been investigated. The effect of ballmilling the fused oxidic precursor of the industrial KM1 ammonia synthesis catalyst has also been studied. The results show that highenergy ballmilling offers some interesting possibilities for preparing novel catalytic materials. It is observed that ballmilling of the powder oxides mixture leads to formation of solid solutions and the catalytic activity is significantly higher than that of the starting material. Furthermore, ballmilling of fused oxidic KM1 precursor is seen to give rise to more homogeneous promoter distribution and slightly higher activity. The quite small activity increase observed in this case probably reflects the fact that the fusion process has already resulted in a close to optimal promoter distribution. The choice of atmosphere during ballmilling is also seen to offer possibilities for regulating the phase composition.     

Mechanisms of Iron Activation on Fe-Containing Zeolites and the Charge of α-Oxygen

According to previous Mössbauer data [1] -sites formation at the activation of Fe-containing zeolites is accompanied by irreversible self-reduction of the iron, proceeding without participation of an external reducing agent. Reduced Fe²⁺ ions are inert to O₂ but are reversibly oxidized to Fe³⁺ by N₂O, generating the -oxygen species, O, which provide selective oxidation of hydrocarbons.In this work, the mechanism of -sites formation was studied via quantitative measurement of the dioxygen amount desorbed into the gas phase at the step of self-reduction. A prominent role of the zeolite matrix chemical composition has been revealed. For example, with zeolites of Al–Si composition (FeZSM-5 and Fe-), heating to 900 °C in a closed vacuum space leads to irreversible evolution of O₂, which is accompanied by the immediate formation of -sites. Similar heating of B–Si and Ti–Si zeolites also leads to dioxygen evolution; however, this evolution is reversible and is not accompanied by formation of -sites. Activation of these zeolites occurs only in the presence of water vapor. Stoichiometric measurements showed that in terms of charge one regular O^2- ion, removed at the activation, is equivalent to two -oxygen atoms. So, -oxygen is identified as an ion-radical species O ^-., whose unique oxidation properties still distinguish it from the generally observed O^-. radicals.The mechanism of -sites formation is proposed, in which the process of strong chemical stabilization of reduced Fe²⁺ atoms in the zeolite structure is a key step, making impossible the reoxidation of the iron with O₂.     

Hydrosilylation catalysts derived from cyclodextrin organometallic platinum inclusion compounds and their use in command-cure applications

Beta-cyclodextrin (-CD) complexes of CODPtX ₂ (COD=1.5-cyclooctadiene.X=Cl, Br, and I) have been prepared and employed as hydrosilylation catalysts. When used in cross-linkable, silicone-containing systems, these catalysts provide a long shelf stability at ambient temperature but cure rapidly at elevated temperature. These systems thus have the property of command-cure. Extensive analytical investigations were undertaken to develop reproducible synthetic methodology for the preparation of inclusion compounds free of surface contamination of the guest platinum compound. Water plays a key role in the synthesis of such platinum inclusion compounds. Dried -CD CODPtX ₂ compounds can be washed with organic solvent to remove residual uncomplexed CODPtX ₂, while organic solvent washing of wet inclusion compounds results in removal of the guest from the -CD cavity. Examination of these catalysts in curable silicone systems is described.     

Factors governing the electrochemical synthesis of α-nickel (ii) hydroxide

The electrodeposition of -nickel hydroxide is promoted by the simultaneous chemical corrosion of the electrode by an acidic nitrate bath. Chemical corrosion results in the formation of a poorly ordered layered phase which is structurally similar to -nickel hydroxide and provides nucleation sites for the deposition of the latter. Therefore under conditions which enhance corrosion rates such as low current density (<1.3 mA cm–2), high temperature (60 C), high nickel nitrate concentration ( 1M) and the resultant low pH (1.7), -nickel hydroxide electrodeposition is observed, while -nickel hydroxide forms under other conditions. Further, -nickel hydroxide deposition is more facile on an iron electrode compared to nickel or platinum.     

Acetone conversion to isobutene in high selectivity using zeolite β catalyst

The catalytic activity of the proton forms of zeolite and ZSM-5 are compared for the conversion of acetone. Zeolite demonstrates markedly enhanced selectivity to isobutene and selectivities of >80% can be achieved for conversions up to 65%. In contrast high selectivities to isobutene with ZSM-5 can be attained only at very low conversions (5%).     

Surface of a Titanium Target After Interaction with Shaped‐Charge Jet Particles

Coatings containing WC_1-x and W₂C_1-x tungsten carbides were produced on titanium targets by a shapedcharge explosion. The experiment used conical liners with a cone angle of 30° manufactured from a mixture of fine powders of tungsten, graphite, and ammonium nitrate. A comparative quantitative xray analysis of the top and bottom layers of the coating was performed. For the phase WC_1-x in the bottom layer, the value of the cubic unit cell parameter falls outside the range known in the literature. Microhardness in different segments of the target was studied.     

Partial oxidation of methane to synthesis gas

Partial oxidation of methane to synthesis gas has been carried out over a number of transition metal catalysts under a range of conditions. It is found that the metals Ni, Ru, Rh, Pd, Ir and Pt, either supported on alumina or present in mixed metal oxide precursors, will bring the system to equilibrium. The yield of CO and H2 improves with increasing temperature in the range 650–1050 K, and decreases with increasing pressure between 1 and 20 atm. An excellent yield (92%) is obtained with a 421 N₂CH₄O₂ ratio at 1050 K and atmospheric pressure, with a space velocity of 4×10⁴ hour^–1.     

Impact of Structural Factors on Unsteady Combustion Modes of Gasless Systems

Based on the twotemperature, twovelocity timedependent model of gasless combustion, taking into account structural transformations related to the force action of the gas filtering in the pores and vitrification and volume variation of the condensed phase during the chemical transformation, selfoscillatory combustion modes are studied. Structural transformations are shown to have a pronounced effect on the propagation pattern of combustion waves and can either stabilize or destabilize combustion. The major structural parameters appreciably affecting combustionwave stability are the initial porosity, particle size, and pressure.     

A miscibility study of ternary blends of polystyrene,tetramethylbisphenol-A polycarbonate,and poly(2,6-dimethyl-1,4-phenylene oxide)

Phase behaviorof ternary blends of polystyrene (PS), tetramethylbisphenol-A polycarbonate (TMPC), and poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) at two different temperatures (i.e., 210 and 300 °C, respectively) was studied by means of differential scanning calorimetry. Miscibility of the ternary blends at either temperature was found restricted to limited compositions, in agreement with simulated spinodal curves based on published values of interaction parameters. The limited ability of PS, which is separately miscible with TMPC and PPO at 210 °C, to act as a common solvent for the immiscible TMPC/PPO pair at this temperature was explained in terms of the disparity in PS/TMPC and PS/PPO pair interactions (i.e., the 'X effect).     

Lean NOx catalysis over alumina‐supported catalysts

aluminasupported catalysts show promise as lean NO_x catalysts. The role of alumina in influencing the structural and chemical properties of the active phase supported on it is discussed using some effective aluminabased lean NO_x catalysts. These include Ag/Al₂O₃, CoO_x/Al₂O₃ and SnO₂/Al₂O₃. Alumina plays an important role in stabilizing Ag in the oxidic phase and cobalt in the 2+ oxidation state. For SnO₂/Al₂O₃, alumina increases the SnO₂ surface area. On both Ag/Al₂O₃ and SnO₂/Al₂O₃, alumina also participates actively in the NO_x reduction reaction. An active organic intermediate is formed on Ag or Sn oxide which reacts with NO_x subsequently on alumina to form N₂.     

Phase transitions and dimensional and morphological changes in an “Aluminum Hydroxide-Alumina” system under a shock-wave action

A method is proposed to study the sequence of phase transitions in powdered materials under a shock-wave action. It is shown that the aluminum hydroxide-alumina system has the following sequence of phase transformations under a shock-wave action: bayerite boehmite -Al₂O₃ -Al₂O₃. It is found that there are no transitional high-temperature modifications of alumina. A method is developed for obtaining a submicron alumina powder, which allows obtaining materials with a controlled phase composition, including a thermodynamically stable -modification of Al₂O₃. The specific features of the morphological structure and the phase and structural characteristics of powders after a shock-wave action are considered.Translated from Fizika Goreniya i Vzryva, Vol. 41, No. 1, pp. 110–119, January–February, 2005.     

Experimental Study of Ignition of a Gasoline–Air Mixture in a Constant‐Volume Combustion Chamber

The characteristics of flamekernel development in a premixed gasoline–air mixture in a cylindrical constantvolume combustion chamber are measured. The experiments are performed with an initial temperature of 393 K, pressure of 6 bar, and equivalence ratio = 0.8 with the use of various ignition systems and spark plugs. The schlieren pictures of the process are presented, and the measured results for flame velocity, heatrelease rate, and mass fraction of the burnt fuel are analyzed.     

Crystal Orientation Dependence of Macropore Formation in n-Si With Backside-Illumination in HF-Electrolyte

The formation of macropores on anodically biased n-type silicon with backside-illumination was investigated as a function of crystal orientation and bias voltage. Specimens were cut from bulk crystals with various orientations from {100} to {111}, polished and subjected to anodic etching in HF. The resulting pores were investigated on cleaved samples by SEM. All pores were found to grow in either a 100 direction or a 113 direction, depending on the misorientation angle. This finding applies also to the branching of a single pore. The results can be understood if the valence for the dissolution reaction is approximately 2.6 in 100 and approximately 4 in the 113 direction, and if all other directions are not allowed for the growth of pores in Si.     

Synthesis, Characterization and Optimum Reaction Conditions of Oligo-N, N′-bis (2-hydroxy-1-naphthalidene) Thiosemicarbazone

The oxidative polycondenzation reaction conditions of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (HNTSC) using air oxygen, H₂O₂ and NaOCl were studied in an aqueous alkaline medium between 50–90°C. Oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was characterized by ¹H-NMR, FT-IR, UV-Vis, size exclusion chromatography (SEC) and elemental analysis techniques. Solubility testing of oligomer was investigated using organic solvents such as DMF, THF, DMSO, methanol, ethanol, CHCl₃, CCl₄, toluene acetonitrile, ethyl acetate, concentrated H₂SO₄ and an aqueous alkaline solution. Using NaOCl, H₂O₂ and air O₂ oxidants, conversion to oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (OHNTSC) of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was found to be 85, 80 and 76%, respectively, in an aqueous alkaline medium. According to the SEC analyses, the number-average molecular weight, weight-average molecular weight and polydispersity index values of OHNTSC synthesized were found to be 1050 gmol^–1 1715 gmol^–1 and 1.63, using NaOCl, and 2137, 2957 gmol^–1 and 1.38, using air O₂ and 2155 gmol^–1 4164 gmol^–1 and 1.93, using air H₂O₂, respectively. Also, TG analysis was shown to be unstable of oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone against thermo-oxidative decomposition. The weight loss of OHNTSC was found to be 97.29% at 900°C.     

Electrosynthesis of 4,4′-dinitroazobenzene on PbO2 electrodes

Parameters which affect the electrosynthesis of 4,4-dinitroazobenzene from p-nitroaniline on platinum and PbO₂ electrodes were investigated and optimum conditions were determined. Maximum conversion efficiency for electrosynthesis was 95% with a pure -PbO₂ electrode. It was found that the electrocatalytic activity of a PbO₂ electrode depends upon its / ratio and its degree of crystallinity. The effects of the added base and water on the conversion efficiency were also elucidated.     

Determination of state-of-discharge of zinc-silver oxide button cells. II. Impedance measurements

The prediction of the state-of-discharge of numerous types of Zn-Ag₂O button cells from six international manufacturers has been investigated using the impedance technique over an extended frequency range. The frequency responses at various states-of-discharge are presented and it is shown that the changes in impedance which result from discharging provide several potential parameters for the state-ofdischarge prediction. The complex impedance plot of the undischarged cells usually shows a fairly welldefined semicircle at high frequencies and a straight line with a slope between 40 and 50° at low frequencies. As discharge proceeds, the diameter of the semicircle increases and the overlap between the semicircle and the low-frequency straight line increases. The most attractive method would be to determine a parameter such as a characteristic relaxation frequency in the complex impedance plot. Unfortunately, no unambiguous characteristic parameter can be extracted due to the non-ideal shape of the impedance response at high frequencies. The determination of the diameter of the high-frequency semicircle has been faced with the same difficulties. The most reliable test was found to be the determination of either the phase of the impedance, or a corrected phase ^– taken from the high-frequency intercept. The proposed prediction is a go/no go indication on the basis of one- or two-frequency measurements for or, ^– respectively. The selection is made at 20–40% state-of-discharge. The charge withdrawn is negligibly small and the time of the test is between 1 and 100 s depending on the type of cell. A calibration is necessary for each cell dimension and each manufacturer. Some 10–16% of the types of cells investigated could not be selected successfully, mainly because of too large a dispersion of the electrical characteristics of the cells, especially for small newly developed types, and of the similarity of the ( and values in the low and high state-of-discharge in the appropriate frequency range. The latter difficulty arises from the difference of the frequency response between the undischarged and the partly discharged cells occurring at high frequencies.This is the second of a series of papers dedicated to Professor Ernest Yeager on the ocasion of his 60th birthday.