Immobilization of Escherichia coli cells using porous support particles coated with cationic polymers

The technique of cell immobilization using porous biomass support particles (BSPs), which is attractive from the point of view of simplicity and convenience, relies on the inherent ability of adhesive cells, as a consequence of their growth, to form films around the support material or the ability of flocculent cells to create flocs within the porous structure. In the present study, the immobilization of Escherichia coli cells using BSPs was investigated in shake-flask culture. The density of the cells immobilized within the BSPs was evaluated by measuring their intracellular lactate dehydrogenase (LDH) activity. Since E. coli K12 cells were not successfully retained within reticulated polyvinyl formal (PVF) resin BSPs with matrices of relatively small pores (pore diameter 60 microm), coating the surface of the BSPs with various polymers was examined as a way of promoting cell attachment. When positively charged polyamino acids such as poly-L-lysine, poly-L-arginine, poly-L-histidine, and poly-L-ornithine were adsorbed onto the particle surface, they were found to increase the immobilized cell density, while neutral and negatively charged polyamino acids including poly-L-asparagine and poly-L-glutamic acid were not effective. These results indicate that E. coli cells can be efficiently immobilized in PVF resin BSPs by electrostatic interaction between the negatively charged ions of the cell surface and the positively charged polymers adsorbed onto the BSP surface. A significantly high immobilized cell density was also achieved by coating the surface of the BSPs with the synthetic polymeric amine polyethyleneimine.     

CHARACTERISATION OF BEER PARTICLE CHARGES AND THE ROLE OF PARTICLE CHARGE IN BEER PROCESSING

Streaming current measurement has been shown to be an effective tool in measuring the net charge of beer particles. Using this method, it was demonstrated that non-microbiological particles of a number of beers could be either positively or negatively charged. Copper fining has been shown to significantly affect the net charge of the NMP in the resultant beer. Increasing the copper fining rate enhances the negative net charge of the NMP to a limiting value at which the addition of further copper finings has no effect. This is believed to correspond to the complete removal of all of the positively charged NMP by copper fining. The reduction in pH during fermentation results in the production of further positively charged NMP. The presence of positively charged NMP has been shown to have an adverse effect on isinglass fining performance. These results suggest that choice of raw materials and process conditions play as much of a role in defining fining performance as does careful consideration of fining rates .     

Oxidation of the antiviral drug acyclovir and its biodegradation product carboxy-acyclovir with ozone: kinetics and identification of oxidation products

The oxidation of the antiviral drug acyclovir (ACV) and its main biotransformation product carboxy-acyclovir (carboxy-ACV) by ozone was investigated. Both compounds have recently been detected in surface water, and carboxy-ACV has also been detected in drinking water. The experiments revealed a strong pH dependence of the oxidation of ACV and carboxy-ACV with reaction rate constants increasing by 4 orders of magnitude between the protonated, positively charged form (k(ox,PH(+)), ～2.5 × 10(2) M(-1) s(-1)) and the deprotonated, negatively charged form (k(ox,P(-)), 3.4 × 10(6) M(-1) s(-1)). At pH 8 a single oxidation product was formed which was identified via LC-LTQ-Orbitrap MS and NMR as N-(4-carbamoyl-2-imino-5-oxoimidazolidin)formamido-N-methoxyacetic acid (COFA). Using Vibrio fischeri , an acute bacterial toxicity was found for COFA while carboxy-ACV revealed no toxic effects. Ozonation experiments with guanine and guanosine at pH 8 led to the formation of the respective 2-imino-5-oxoimidazolidines, confirming that guanine derivatives such as carboxy-ACV are undergoing the same reactions during ozonation. Furthermore, COFA was detected in finished drinking water of a German waterworks after ozonation and subsequent activated carbon treatment.     

Biogenic Fe(III) minerals lower the efficiency of iron-mineral-based commercial filter systems for arsenic removal

Millions of people worldwide are affected by As (arsenic) contaminated groundwater. Fe(III) (oxy)hydroxides sorb As efficiently and are therefore used in water purification filters. Commercial filters containing abiogenic Fe(III) (oxy)hydroxides (GEH) showed varying As removal, and it was unclear whether Fe(II)-oxidizing bacteria influenced filter efficiency. We found up to 10(7) Fe(II)-oxidizing bacteria/g dry-weight in GEH-filters and determined the performance of filter material in the presence and absence of Fe(II)-oxidizing bacteria. GEH-material sorbed 1.7 mmol As(V)/g Fe and was ~8 times more efficient than biogenic Fe(III) minerals that sorbed only 208.3 μmol As(V)/g Fe. This was also ~5 times more efficient than a 10:1-mixture of GEH-material and biogenic Fe(III) minerals that bound 322.6 μmol As(V)/g Fe. Coprecipitation of As(V) with biogenic Fe(III) minerals removed 343.0 μmol As(V)/g Fe, while As removal by coprecipitation with biogenic minerals in the presence of GEH-material was slightly less efficient as GEH-material only and yielded 1.5 mmol As(V)/g Fe. The present study thus suggests that the formation of biogenic Fe(III) minerals lowers rather than increases As removal efficiency of the filters probably due to the repulsion of the negatively charged arsenate by the negatively charged biogenic minerals. For this reason we recommend excluding microorganisms from filters (e.g., by activated carbon filters) to maintain their high As removal capacity.     

Evaluation of microspheres as surrogates for Cryptosporidium parvum oocysts in filtration experiments

The size and surface characteristics of a surrogate particle and Cryptosporidium parvum oocysts are important in determining the ability of the particle to mimic the behavior of C. parvum oocysts in filtration and particle transport experiments. The zeta potential, hydrophobicity, and filterability of a surrogate particle, 5 microm carboxylated latex microspheres, and oocysts were compared for a variety of solution conditions. C. pervum oocysts had a slightly negative zeta potential (-1.5 to -12.5 mV) at pH 6.7 over a wide range of calcium concentration (10(-6)-10(-1) M), while the fluorescent microspheres were more negatively charged under the same conditions (-7.4 to -50.2 mV). After exposure to 5 mg of C/L of Suwanee River natural organic matter (NOM), the ; potentials of both particles became significantly more negative, with the microspheres consistently maintaining a more negative zeta potential than the oocysts. Alum was able to neutralize the negative zeta potentials of both particles when in the presence of NOM, but nearly twice the dosage was required for the microspheres. NOM also affected the hydrophobicity of the particles by increasing the hydrophobicity of the relatively hydrophilic oocysts and decreasing the hydrophobicity of the relatively hydrophobic microspheres. A bench-scale filtration system removed less microspheres (40.3 +/- 1.5%) than oocysts (49.7 +/- 2.9%) when 0.01 M CaCl2 was supplied as coagulant. After preexposure to 5 mg of C/L of NOM, the removals of both particles declined significantly, and the removals of microspheres (13.7 +/- 1.5%) and oocysts (16.3 +/- 1.5%) were similar. Finally, the removal efficiencies of microspheres and oocysts in the presence of NOM increased to 69.3 +/- 3.5% and 67.7 +/- 6.4%, respectively, when alum was supplied as coagulant at the optimum dosage needed to destabilize the oocysts. These experimental results suggest that microspheres can be used to provide a conservative estimate of oocyst removal in filters containing hydrophilic negatively charged filter media.     

Influence of surface charge distributions and particle size distributions on particle attachment in granular media filtration

Filtration experiments were performed with a laboratory-scale filter using spherical glass beads with 0.55 mm diameter as collectors. Suspensions were made with Min-U-Sil 5 particles, and two different methods (pH control and polymer dosing) were used for destabilization. In the pH control experiments, all particles had negative surface charge, and those with lower (absolute value) charge were selectively attached to the collectors, especially during the early stage of filtration. This selective attachment of the lower charged particles caused the zeta potential distribution (ZPD) of the effluent to move to a more negative range. However, the ZPD of the effluent did not continue moving to more negative values during the later stages of filtration, and this result was attributed to two reasons: ripening effects and detachment of flocs. In the polymer experiments, substantial differences were found between experiments performed with negatively charged particles (underdosing) and those with positively charged particles (overdosing). With under-dosing, the results were similar to the pH control experiments (which also had negatively charged particles), but with overdosing, the effluent's ZPDs in the early stages did not overlap with those of the influent and more highly charged particles were removed more efficiently than lesser-charged particles. It is hypothesized that, despite a substantial period of pre-equilibration of media and coagulant, this equilibrium shifted when particles were also added. It was assumed that coagulant molecules previously adsorbed to the particles desorbed and subsequently attached to the filter media because of surface area differences in the particle and filter media.     

Bacterial attachment to RO membranes surface-modified by concentration-polarization-enhanced graft polymerization

Concentration polarization-enhanced radical graft polymerization, a facile surface modification technique, was examined as an approach to reduce bacterial deposition onto RO membranes and thus contribute to mitigation of biofouling. For this purpose an RO membrane ESPA-1 was surface-grafted with a zwitterionic and negatively and positively charged monomers. The low monomer concentrations and low degrees of grafting employed in modifications moderately reduced flux (by 20-40%) and did not affect salt rejection, yet produced substantial changes in surface chemistry, charge and hydrophilicity. The propensity to bacterial attachment of original and modified membranes was assessed using bacterial deposition tests carried out in a parallel plate flow setup using a fluorescent strain of Pseudomonas fluorescens. Compared to unmodified ESPA-1 the deposition (mass transfer) coefficient was significantly increased for modification with the positively charged monomer. On the other hand, a substantial reduction in bacterial deposition rates was observed for membranes modified with zwitterionic monomer and, still more, with very hydrophilic negatively charged monomers. This trend is well explained by the effects of surface charge (as measured by ζ-potential) and hydrophilicity (contact angle). It also well correlated with force distance measurements by AFM using surrogate spherical probes with a negative surface charge mimicking the bacterial surface. The positively charged surface showed a strong hysteresis with a large adhesion force, which was weaker for unmodified ESPA-1 and still weaker for zwitterionic surface, while negatively charged surface showed a long-range repulsion and negligible hysteresis. These results demonstrate the potential of using the proposed surface- modification approach for varying surface characteristics, charge and hydrophilicity, and thus minimizing bacterial deposition and potentially reducing propensity biofouling.     

Arsenic removal using polymer-supported hydrated iron(III) oxide nanoparticles: role of donnan membrane effect

The conditions leading to the Donnan membrane equilibrium arise from the inability of ions to diffuse out from one phase in a heterogeneous system. In a polymeric cation exchanger, negatively charged sulfonic acid groups are covalently attached to the polymer chains, and thus, they cannot permeate out of the polymer phase. Conversely, a polymeric anion exchanger contains a high concentration of non-diffusible positively charged quaternary ammonium functional groups. It is well-established that submicron or nanoscale hydrated iron(III) oxide (HFO) particles exhibit high sorption affinity toward both arsenates and arsenites. In this study, commercially available cation and anion exchangers were used as host materials for dispersing HFO nanoparticles within the polymer phase using a technique previously developed. The resulting polymeric/inorganic hybrid sorbent particles were subsequently used for arsenic removal in the laboratory. The most significant finding of the study is that the anion exchanger as a substrate containing dispersed HFO offered substantially higher arsenate removal capacity as compared to the cation exchanger, all other conditions remaining identical. In fact, HFO nanoparticles dispersed within the gel-type cation exchanger were unable to remove arsenic. The Donnan membrane effect resulting from the nondiffusible negatively charged sulfonic acid groups in the cation exchanger did not allow permeation of arsenate into the polymer phase (i.e., arsenate was excluded from the spherical beads dispersed with HFO nanoparticles). On the contrary, anion-exchanger-supported HFO particles or HAIX offered very high arsenic removal capacity; less than 10% of influent arsenic broke through after 10 000 bed vol. HAIX was also amenable to efficient regeneration with 2% NaOH and 3% NaCl and capable of simultaneously removing both perchlorate and arsenic selectively. According to the information in the open literature, HAIX is the first hybrid sorbent that utilizes the Donnan membrane effect of the host material for sorption enhancement. From a generic viewpoint, other metal oxide/metal nanoparticles may also be judiciously embedded in appropriate support materials that would reject or enhance permeation of targeted ionic solutes.     

Sensory Evaluation of Taste of Alkali-ion Water and Bottled Mineral Waters

ABSTRACT: The sensory evaluation of alkali‐ion water and bottled mineral water was performed by panelists and their preferences for the taste of alkali‐ion water was surveyed. Consequently, alkali‐ion water made from tap water was found to taste better than any bottled mineral water; however, the activated carbon filtration water, which was also made from tap water, was found to taste better than alkali‐ion water. Furthermore, smell, taste, feeling in the throat, aftertaste, and general impression of the mineral water, alkali‐ion waters, and activated carbon filtration water were evaluated using the 1‐pair comparison method. Consequently, alkali‐ion water and activated carbon filtration water were more highly rated than commercial bottled mineral water.     

The effects of the surface charge and hydrophobicity of Escherichia coli on its adhesion to beef muscle

The surface characteristics of Escherichia coli strains were studied to evaluate the effect upon bacterial adhesion to beef muscle. The influence of suspension conditions upon the surface charge of a pathogenic strain, E. coli O157:H7 (EC01), and a saprophytic laboratory strain, E. coli JM109 (EC22) were investigated and compared. The cellular surface charge of most E. coli O157:H7 strains were much less affected by changes in the pH, ionic strength or concentration of surfactants in the suspending medium than was the surface charge of E. coli JM109 cells. Strong adhesion to beef muscle was found in suspending conditions of pH 4 or 10, and with a lowered ionic strength. All E. coli strains tested were negatively charged in 150 mM PBS buffer (pH 7.4) as measured by zeta potentials, ranging from -4.9 to -33.9 mV. Based on the results of adhesion to hexadecane, nine out of 22 strains tested were moderately hydrophobic with about 50% of the cells bound to the solvent. Cellular adhesion of 16 E. coli strains to beef muscle was examined in 150 mM PBS buffer. Generally, O157:H7 strains had lower adhesive properties (Sr value less than 0.10) to beef muscle than other serotypes (up to 0.39). No correlation was found between E. coli cell surface charge, hydrophobicity and adhesion to beef muscle.     

Removal of E. coli from water using surface-modified activated carbon filter media and its performance over an extended use

Modification of activated carbon (AC) by aluminum hydroxychloride (AHC), and diatomaceous earth by zinc hydroxide changed the zeta potentials of these filter media from negative to positive. The modification method is amenable to room temperature, and eliminates the essential requirement of strong base treatment for making metal hydroxide coated filter media. Solid-state MAS 27Al NMR spectra suggested the presence of Al13-mer in the AHC-treated AC. AHC-modified AC samples were further treated with silver halide, and two antibacterial compounds to prevent microbial growth on filter media. In situ precipitation of silver bromide on AC resulted in formation of nanosized AgBr crystals. Bacteria removal performances of the modified media were tested in columns. For the first time, we demonstrated that only 30 g of either AHC-treated AC (60 x 200 mesh) or nano AgBr supported AC could provide >6 log E. coli removal over approximately 1000 L when the input water had a bacterial load of 10(7) CFU/mL. The filter media were robust enough to perform even when water was passed at superficial velocities 3-10 times the typical velocity (6 cm/min) of water treatment processes. Metal leaching from the modified media was found to be less than the USEPA specified Maximum Contaminant Level.     

The use of Fourier transform infrared spectroscopy to differentiate Escherichia coli O157:H7 from other bacteria inoculated into apple juice

Fourier transform infrared spectroscopy (FT-IR) can discriminate Escherichia coli O157:H7 ATCC 35150 from other bacteria: E. coli ATCC 25522, Bacillus cereus ATCC 10876, and Listeria innocua ATCC 51742 inoculated in to apple juice. Spectra of bacterial suspensions (ca. 10(9) cfu/ml in 0.9% NaCl) on Anodisc (aluminum oxide) filters were tested. Unique FT-IR vibrational combination bands from mid-IR active components of bacterial cells are present in the "fingerprint region" at wavenumbers between 1500 and 800 cm(-1). Principal component analysis (PCA) revealed clear segregations between different bacterial strains. Also, soft independent modeling of class analogy (SIMCA) correctly classified E. coli O157:H7 ATCC 35150 from E. coli ATCC 25522 at an 82% confidence level; whereas a 77% confidence level was obtained when using SIMCA to classify E. coli O157:H7 from three other bacterial strains.     

凹凸棒石粘土对水溶性染料的吸附脱色研究

研究凹凸棒石粘土对几种水溶性染料的吸附脱色作用,并对其中脱色效果较明显的亚甲基蓝和弱酸艳蓝RAW进行深入探讨.结果表明,凹凸棒石粘土对两种染料的吸附均可在短时间内达到平衡;振荡有利于吸附,而温度、pH值对两种染料的吸附均无显著影响;适当增加染液浓度可以提高凹凸棒石粘土的吸附量,相同条件下凹凸棒石粘土对亚甲基蓝的吸附能力高于弱酸艳蓝RAW.除活性染料外,凹凸棒石粘土对其它染料的脱色性能均优于活性炭.     

Enhanced microbial adaptation to p-nitrophenol using activated sludge retained in porous carrier particles and simultaneous removal of nitrite released from degradation of p-nitrophenol

In order to examine the microbial degradation of p-nitrophenol (PNP) by a mixed culture system and simultaneous removal of nitrite released via the degradation, an activated sludge retained in porous carrier particles and a suspension culture as a control were acclimated to artificial sewage containing PNP as the sole carbon source. The adaptation of microbes retained in porous carrier particles to PNP was faster than that of suspended microbes by more than 20 d. After microbial adaptation to PNP, it was degraded completely without significant accumulation of intermediate metabolites. The PNP degradation activity of the retained microbes was more than 2 times higher than that of the suspended microbes. By increasing the retained microbial concentration, nitrite released from the degraded PNP was removed by denitrification. This research demonstrates that using microbes retained in porous carrier particles is not only effective for reduction of acclimation time but also enables simultaneous removal of the nitrogen compounds resulting from the degradation of nitroaromatics.     

Modulation of cell surface hydrophobicity and attachment of bacteria to abiotic surfaces and shrimp by malaysian herb extracts

The use of simple crude water extracts of common herbs to reduce bacterial attachment may be a cost-effective way to control bacterial foodborne pathogens, particularly in developing countries. The ability of water extracts of three common Malaysian herbs (Andrographis paniculata, Eurycoma longifolia, and Garcinia atroviridis) to modulate hydrophobicity and attachment to surfaces of five food-related bacterial strains (Bacillus cereus ATCC 14576, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 10145, Salmonella Enteritidis ATCC 13076, Staphylococcus aureus ATCC 25923) were determined. The bacterial attachment to hydrocarbon assay was used to determine bacterial hydrophobicity. Staining and direct microscopic counts were used to determine attachment of bacteria to glass and stainless steel. Plating on selective media was used to determine attachment of bacteria to shrimp. All extracts were capable of either significantly ( P < 0.05) increasing or decreasing bacterial surface hydrophobicity, depending on the herb extract and bacteria combination. Bacterial attachment to all surfaces was either significantly (P < 0.05) increased or decreased, depending on the herb extract and bacteria combination. Overall, hydrophobicity did not show a significant correlation (P > 0.05) to bacterial attachment. For specific combinations of bacteria, surface material, and plant extract, significant correlations (R > 0.80) between hydrophobicity and attachment were observed. The highest of these was observed for S. aureus attachment to stainless steel and glass after treatment with the E. longifolia extract (R = 0.99, P < 0.01). The crude water herb extracts in this study were shown to have the potential to modulate specific bacterial and surface interactions and may, with further work, be useful for the simple and practical control of foodborne pathogens.     

Stoichiometry of coagulation revisited

The roles of particles and natural organic matter (NOM) in determining coagulant (alum) doses in potable water treatment were investigated at two pH conditions (6 and 7). The concentrations of NOM and colloidal silica particles in raw water were systematically varied separately and in combination, and the impacts of these two classes of contaminants on the minimum effective alum doses were investigated using observations of turbidity and dissolved organic carbon (DOC) in laboratory jar tests. At both pHs, coagulant requirements for the removal of these contaminants by sedimentation and filtration were dominated by the DOC concentration in the raw water. The presence of low NOM concentrations (0.75-1.5 mg of C/L) decreased the minimum effective alum dose dramatically for waters low in silica particles, possibly by promoting the precipitation of aluminum hydroxide and/or Al-NOM solids, whose removal would otherwise be limited by low collision opportunities. Strong stoichiometric relationships were observed between DOC and coagulant demand at both pHs regardless of silica particle concentration. Silica contributed to coagulant demand only at very high particle concentrations.     

Effects of particulate carbonaceous matter on the bioavailability of benzo[a]pyrene and 2,2',5,5'-tetrachlorobiphenyl to the clam, Macoma balthica

We investigated the bioavailability via diet of spiked benzo[a]pyrene (BaP) and 2,2',5,5'-tetrachlorobiphenyl (PCB-52) from different carbonaceous (non-carbonate, carbon containing) particle types to clams (Macoma balthica) collected from San Francisco Bay. Our results reveal significant differences in absorption efficiency between compounds and among carbonaceous particle types. Absorption efficiency for PCB-52 was always greater than that for BaP bound to a given particle type. Among particles, absorption efficiency was highest from wood and diatoms and lowest from activated carbon. Large differences in absorption efficiency could not be simply explained by comparatively small differences in the particles' total organic carbon content. BaP and PCB-52 bound to activated carbon exhibited less than 2% absorption efficiency and were up to 60 times less available to clams than the same contaminants associated with other types of carbonaceous matter. These results suggest that variations in the amount and type of sediment particulate carbonaceous matter, whether naturally occurring or added as an amendment, will have a strong influence on the bioavailability of hydrophobic organic contaminants. This has important implications for environmental risk assessment, sediment management, and development of novel remediation techniques.     

Activated carbon cloth as anode for sulfate removal in a microbial fuel cell

By employing the sulfate-reducing bacterium Desulfovibrio desulfuricans we demonstrate the possibility of electricity generation in a microbialfuel cell (MFC) with concomitant sulfate removal. This approach is based on an in situ anodic oxidative depletion of sulfide produced by D. desulfuricans. Three different electrode materials, graphite foil (GF), carbon fiber veil (CFV), and high surface area activated carbon cloth (ACC), were evaluated for sulfide electrochemical oxidation. In comparison to CFV and GF electrodes, ACC was a superior materialfor sulfide adsorption and oxidation and showed significant potential for harvesting energy from sulfate-rich solutions in the form of electricity. Sulfate (3.03 g dm(-3)) was removed from a bacterial suspension, which represented 99% removal. A maximum power density of 0.51 mW cm(-2) (normalized to geometric electrode area) was obtained with a one-chamber, air-breathing cathode and continuous flow MFC operated in batch mode at 22 degrees C.     

脱色工艺中不同粒度活性炭对核桃油中苯并芘脱除效果的影响

研究了在优化的脱色条件下,脱色剂对核桃油中苯并芘的脱除作用。结果表明：不同粒度的活性炭对核桃油中苯并芘脱除效果明显不同。加入油质量的3％的活性白土和0．3％的粒度120-200目的酒类专用粉末炭JT-205的混合物,可以将核桃油中超标的苯并芘（苯并芘含量为34μg／kg）脱除至10μg／kg以下,达到国家规定的安全标准,苯并芘的脱除率可以达到94％以上。而粒度（30-60目）的普通活性炭在相同条件下苯并芘的脱除率只能达到20％,核桃油中苯并芘含量从34μg／kg脱除到25μg／kg,达不到国家规定的安全标准．     

Pb particles from tap water: bioaccessibility and contribution to child exposure

High particulate lead (Pb) levels can be measured in tap water, but the hazard linked to particulate Pb ingestion is unknown. An in vitro test was developed to determine the bioaccessibility of Pb particles from tap water, based on the Relative Bioaccessibility Leaching Procedure validated for soils, and applied to lab-generated particles and field particles collected behind the aerator tap. Field particles were found in 43% of the 342 taps investigated equipped with an aerator, and contained significant amounts of Pb (0.003-71%, median 4.7%). The bioaccessibility of lab-generated particles ranged from 2 to 96% depending on the particle type (Pb(II) > Brass > Pb(IV) > solder), while that of field particles was distributed between 1.5 and 100% (median 41%). The hazard of particulate Pb ingestion depends on the amount and concentration ingested, and the bioaccessibility of the particulate Pb forms involved. Using the Integrated Exposure Uptake Biokinetic model, the impact of particulate Pb on the exposure of children aged 0.5-7 for the distribution system studied was the most significant when considering a fraction of the exposure from large buildings.