Performance of mesoporous carbons derived from poly(vinyl alcohol) in electrochemical capacitors

The present work shows that mesoporous materials obtained by the carbonization of mixtures of poly(vinyl alcohol) with magnesium citrate are very promising candidates for electrodes in supercapacitors. Their high performance arises essentially from a double-layer mechanism through the extent of the total surface area and one obtains at low current density (1 mA cm⁻²) values as high as 180 F g⁻¹ in aqueous 2 M H₂SO₄ electrolyte and around 100 F g⁻¹ in 1 M (C₂H₅)₄NBF₄ in acetonitrile. Moreover, in most cases the specific capacitance is reduced only by 15% at 100 mA cm⁻², as opposed to many other types of carbons which display much higher reductions.     

Pseudocapacitive properties of electrochemically prepared nickel oxides on 3-dimensional carbon nanotube film substrates

Nickel oxides on carbon nanotube electrodes (NiO_x/CNT electrodes) are prepared by depositing Ni(OH)₂ electrochemically onto carbon nanotube (CNT) film substrates with subsequent heating to 300 °C. Compared with the as deposited Ni(OH)₂ on CNT film substrates (Ni(OH)₂/CNT electrodes), the 300 °C heat treated electrode shows much high rate capability, which makes it suitable as an electrode in supercapacitor applications. X-ray photoelectron spectroscopy shows that the pseudocapacitance of the NiO_x/CNT electrodes in a 1 M KOH solution originates from redox reactions of NiO_x/NiO_xOH and Ni(OH)₂/NiOOH. The 8.9 wt.% NiO_x in the NiO_x/CNT electrode shows a NiO_x-normalized specific capacitance of 1701 F g⁻¹ with excellent high rate capability due to the 3-dimensional nanoporous network structure with an extremely thin NiO_x layer on the CNT film substrate. On the other hand, the 36.6 wt.% NiO_x/CNT electrode has a maximum geometric and volumetric capacitance of 127 mF cm⁻² and 254 F cc⁻¹, respectively, with a specific capacitance of 671 F g⁻¹, which is much lower than that of the 8.9% NiO_x electrode. This decrease in specific capacitance of the high wt.% NiO_x/CNT electrodes can be attributed to the dead volume of the oxides, high equivalent series resistance for a heavier deposit, and the ineffective ionic transportation caused by the destruction of the 3-dimensional network structure. Deconvolution analysis of the cyclic voltammograms reveals that the rate capability of the NiO_x/CNT electrodes is adversely affected by the redox reaction of Ni(OH)₂, while the adverse effects from the reaction of NiO_x is insignificant.     

Effects of the cationic structures of fluorohydrogenate ionic liquid electrolytes on the electric double layer capacitance

Electric double layer capacitance of an activated carbon electrode has been measured for fluorohydrogenate ionic liquids (FHILs) based on five different cations (1,3-dimethylimidazolium (DMIm⁺), 1-ethyl-3-methylimidazolium (EMIm⁺), 1-butyl-3-methylimidazolium (BMIm⁺), 1-ethyl-1-methylpyrrolidinium (EMPyr⁺), and 1-methoxymethyl-1-methylpyrrolidinium (MOMMPyr⁺)) at 25 °C. For all the FHILs, the capacitance increases with increase in charging voltage, and exhibits the maximum value around 2.7 V. The capacitances for FHILs are higher than those for EMImBF₄ or 1 M tetraethylammonium tetrafluoroborate in propylene carbonate (TEABF₄/PC) in the measured range (1.0 < V < 3.2). For the three imidazolium-based FHILs, the maximum capacitance decreases with increase in the size of the cation in the order, DMIm(FH)_2.3F (178 F g⁻¹) > EMIm(FH)_2.3F (162 F g⁻¹) > BMIm(FH)_2.3F (135 F g⁻¹). On the other hand, the maximum capacitance observed for MOMMPyr(FH)_2.3F (152 F g⁻¹) is larger than that for EMPyr(FH)_2.3F (134 F g⁻¹) in spite of the larger size of MOMMPyr⁺ than EMPyr⁺, which is derived from introduction of the methoxy group. Some FHILs with low melting points exhibit a sufficient capacitance even at −40 °C (64 F g⁻¹ for EMIm(FH)_2.3F).     

Capacitance studies of cobalt compound nanowires prepared via electrodeposition

The capacitor properties of cobalt compound nanowire (CCNW) electrodes, prepared by the one-step electroreduction of [Co(NH₃)₆]³⁺ in water, have been investigated. The CCNW electrode changes its various properties during its growth. During the initial growth stage, the CCNW electrodes consist of nanowires with smooth surfaces and have a specific capacitance (C_m) of 310 F g⁻¹. During the middle stage, prickles grow on the CCNW surface, leading to a reduction in its real surface area and its C_m value to 230 F g⁻¹. During the final stage, further growth of the prickles is accompanied by the fusion of the CCNWs, and hence, a drastic decrease in the real surface area. However, a maximum capacitance of C_m = 420 F g⁻¹ was obtained during this stage. This unexpected capacitance change was discussed in terms of the effects of rapid ion transfer and the electroactive material/electrolyte interface area. In addition, the aging effect and the cycle life of the CCNW electrode were also investigated.     

Preparation and characterization of carbonaceous materials containing nitrogen as electrochemical capacitor

Carbonaceous materials containing nitrogen (C/N materials) were prepared by a pyrolysis of 2,3,6,7-tetracyano-1,4,5,8-tetraazanaphthalene (CAN). A C/N material prepared by the pyrolysis of CAN at 1070 K (CAN-1070 K) had a C/N atomic ratio of 3.0 and a non-crystalline carbonaceous structure with a BET surface area of 880 m² g⁻¹. The material CAN-1070 K showed large capacitances of 160–180 F g⁻¹ and 110–120 F cm⁻³ in case of current density of 10 mA cm⁻² (2 A g⁻¹) by using three-electrode cell in 1 M H₂SO₄ aqueous solution, in comparison with that of activated carbon (160 F g⁻¹ and 55 F cm⁻³) having BET surface area of 2300 m² g⁻¹. ESCA study indicated that pyridinic and quarternary nitrogen atoms existed in the C/N materials, which could result in producing a pseudo-capacitance in addition to the electric double layer capacitance. Also introduction of nitrogen into the carbonaceous material could enhance the wettability of material, which might also improve the capacitance.     

Potentiostatically deposited nanostructured CoxNi1−x layered double hydroxides as electrode materials for redox-supercapacitors

Cobalt–nickel layered double hydroxides (Co_xNi_1−x LDHs) were deposited onto stainless steel electrodes by the potentiostatic deposition method at −1.0 V vs. Ag/AgCl using various molar ratios of Co(NO₃)₂ and Ni(NO₃)₂ in distilled water. Their structure and surface morphology were studied by using X-ray diffraction analysis, energy dispersive X-ray spectroscopy and scanning electron microscopy. A network of Co_xNi_1−x LDH nanosheets was obtained. The nature of the cyclic voltammetry and charge–discharge curves suggested that the Co_xNi_1−x LDHs exist in the form of solid solutions. The capacitive characteristics of the Co_xNi_1−x LDHs in 1 M KOH electrolyte showed that Co_0.72Ni_0.28 LDHs had the highest specific capacitance value, 2104 F g⁻¹, which is also the highest yet reported value for oxide materials in general.     

Ru oxide supercapacitors with high loadings and high power and energy densities

Supercapacitors with very high energy and power densities have been constructed with hydrous ruthenium oxide powder prepared by a sol–gel method and annealed at 110 °C. Novel features of the capacitors, which improve their performances, are the use of a carbon fibre paper support, a Nafion separator, and Nafion as a binder. 1 M sulfuric acid was employed as the electrolyte. The performances of the supercapacitors were characterized by cyclic voltammetry, impedance spectroscopy and constant current discharging. The interfacial capacitance increased linearly with increasing ruthenium oxide loading to at least 50 mg cm⁻² on each electrode. The gravimetric capacitance of the Ru oxide measure by impedance reached 742 F g⁻¹ (9.66 F cm⁻²) at a loading of 13.0 mg cm⁻², and an interfacial capacitance of 34.9 F cm⁻² (682 F g⁻¹) was obtained at 51.2 mg cm⁻². The average effective series resistance was 0.55 Ω, the electronic resistance of the electrodes was negligible, and their ionic resistances were <0.42 Ω. The average power density for full discharge at 1 A cm⁻² for supercapacitors with 10 mg cm⁻² Ru oxide increased by 39% when 5% Nafion binder was added. The maximum average power density for full discharge was 31.5 W g⁻¹ while the maximum energy density was 31.2 Wh kg⁻¹. At a 1 mA discharge rate a specific capacitance of 977 F g⁻¹ of Ru oxide was obtained.     

Poly(3-methylthiophene)/MnO2 composite electrodes as electrochemical capacitors

Composite electrodes prepared by electrodeposition of manganese oxide on titanium substrates modified with poly(3-methylthiophene) (PMeT) were investigated and compared with Ti/MnO₂ electrodes. The polymer films were prepared by galvanostatic deposition at 2 mA cm⁻² with different deposition charges (250 and 1500 mC cm⁻²). The electrodes were characterized by cyclic voltammetry in 1 mol L⁻¹ Na₂SO₄ and by scanning electron microscopy. The results show a very significant improvement in the specific capacitance of the oxide due the presence of the polymer coating. For Ti/MnO₂ the specific capacitance was of 122 F g⁻¹, while Ti/PMeT₂₅₀/MnO₂ and Ti/PMeT₁₅₀₀/MnO₂ displayed values of 218 and 66 F g⁻¹, respectively. If only oxide mass is considered, the capacitances of the composite electrode increases to 381 and 153 F g⁻¹, respectively. The micrographs of samples show that the polymer coating leads to very significant changes in the morphology of the oxide deposit, which in consequence, generate the improvement observed in the charge storage property.     

Carbon nanofibre/hydrous RuO2 nanocomposite electrodes for supercapacitors

Amorphous RuO₂·xH₂O and a VGCF/RuO₂·xH₂O nanocomposite (VGCF = vapour-grown carbon fibre) are prepared by thermal decomposition. The morphology of the materials is investigated by means of scanning electron microscopy. The electrochemical characteristics of the materials, such as specific capacitance and rate capability, are investigated by cyclic voltammetry over a voltage range of 0–1.0 V at various scan rates and with an electrolyte solution of 1.0 M H₂SO₄. The specific capacitance of RuO₂·xH₂O and VGCF/RuO₂·xH₂O nanocomposite electrodes at a scan rate of 10 mV s⁻¹ is 410 and 1017 F g⁻¹, respectively, and at 1000 mV s⁻¹ are 258 and 824 F g⁻¹, respectively. Measurements of ac impedance spectra are made on both the electrodes at various bias potentials to obtain a more detailed understanding of their electrochemical behaviour. Long-term cycle-life tests for 10⁴ cycles shows that the RuO₂·xH₂O and VGCF/RuO₂·xH₂O electrodes retain 90 and 97% capacity, respectively. These encouraging results warrant further development of these electrode materials towards practical application.     

Enhancement of the energy storage properties of supercapacitors using graphene nanosheets dispersed with metal oxide-loaded carbon nanotubes

Graphene nanosheets (GNs) dispersed with SnO₂ nanoparticles loaded multiwalled carbon nanotubes (SnO₂-MWCNTs) were investigated as electrode materials for supercapacitors. SnO₂-MWCNTs were obtained by a chemical method followed by calcination. GNs/SnO₂-MWCNTs nanocomposites were prepared by ultrasonication of the GNs and SnO₂-MWCNTs. Electrochemical double layer capacitors were fabricated using the composite as the electrode material and aqueous KOH as the electrolyte. Electrochemical performance of the composite electrodes were compared to that of pure GNs electrodes and the results are discussed. Electrochemical measurements show that the maximum specific capacitance, power density and energy density obtained for supercapacitor using GNs/SnO₂-MWCNTs nanocomposite electrodes were respectively 224 F g⁻¹, 17.6 kW kg⁻¹ and 31 Wh kg⁻¹. The fabricated supercapacitor device exhibited excellent cycle life with ∼81% of the initial specific capacitance retained after 6000 cycles. The results suggest that the hybrid composite is a promising supercapacitor electrode material.     

Mesoporous activated carbon fiber as electrode material for high-performance electrochemical double layer capacitors with ionic liquid electrolyte

Activated carbon fibers (ACFs) with super high surface area and well-developed small mesopores have been prepared by pyrolyzing polyacrylonitrile fibers and NaOH activation. Their capacitive performances at room and elevated temperatures are evaluated in electrochemical double layer capacitors (EDLCs) using ionic liquid (IL) electrolyte composed of lithium bis(trifluoromethane sulfone)imide (LiN(SO₂CF₃)₂) and 2-oxazolidinone (C₃H₅NO₂). The surface area of the ACF is as high as 3291 m² g⁻¹. The pore volume of the carbon reaches 2.162 cm³ g⁻¹, of which 66.7% is the contribution of the small mesopores of 2-5 nm. The unique microstructures enable the ACFs to have good compatibility with the IL electrolyte. The specific capacitance reaches 187 F g⁻¹ at room temperature with good cycling and self-discharge performances. As the temperature increases to 60 °C, the capacitance increases to 196 F g⁻¹, and the rate capability is dramatically improved. Therefore, the ACF can be a promising electrode material for high-performance EDLCs.     

Supercapacitive properties of hybrid films of manganese dioxide and polyaniline based on active carbon in organic electrolyte

This is the first report about supercapacitive performance of hybrid film of manganese dioxide (MnO₂) and polyaniline (PANI) in an organic electrolyte (1.0 M LiClO₄ in acetonitrile). In this work, a high surface area and conductivity of active carbon (AC) electrode is used as a substrate for PANI/MnO₂ film electro-codeposition. The redox properties of the coated PANI/MnO₂ thin film exhibit ideal capacitive behaviour in 1 M LiClO₄/AN. The specific capacitance (SC) of PANI/MnO₂ hybrid film is as high as 1292 F g⁻¹ and maintains about 82% of the initial capacitance after 1500 cycles at a current density of 4.0 mA cm⁻², and the coulombic efficiency (η) is higher than 95%. An asymmetric capacitor has been developed with the PANI/MnO₂/AC positive and pure AC negative electrodes, which is able to deliver a specific energy as high as 61 Wh kg⁻¹ at a specific power of 172 W kg⁻¹ in the range of 0-2.0 V. These results indicate that the organic electrolyte is a promising candidate for PANI/MnO₂ material application in supercapacitors.     

Construction of composite electrodes comprising manganese dioxide nanoparticles distributed in polyaniline-poly(4-styrene sulfonic acid-co-maleic acid) for electrochemical supercapacitor

This work demonstrated a novel and simple route for preparing a composite comprising of manganese oxide (MnO₂) nanoparticles and polyaniline (PANI) doped poly(4-styrene sulfonic acid-co-maleic acid) (PSSMA) by “electrochemical doping-deposition”. The PANI-PSSMA-MnO₂ composite was characterized by scanning electron microscopy (SEM)), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). SEM images revealed a uniform dispersion of MnO₂ nanoparticles in the porous structure of PANI-PSSMA structure. XRD measurements showed the distortion of the crystal structure of β-MnO₂ after deposition of MnO₂ in PANI-PSSMA structure. Thus, the XRD pattern of PANI was predominating. Cyclic voltammetry and chronopotentiometry were employed in 0.5 M Na₂SO₄ to evaluate the capacitor properties. The results showed a significant improvement in the specific capacitance of the composite electrode. The specific capacitance of PANI-PSSMA-MnO₂ (50.4 F g⁻¹) had improvement values of 172% compared to that of PANI (18.5 F g⁻¹). When only the MnO₂ mass was considered, the composite had a specific capacitance of 556 F g⁻¹.     

Solid state synthesis of hydrous ruthenium oxide for supercapacitors

A novel solid state route has been successfully developed for the synthesis of nano-scale hydrous ruthenium oxide (denoted as RuO₂·xH₂O). The procedure involves directly mixing RuCl₂·xH₂O with alkali to form RuO₂·xH₂O in a mortar at room temperature. Transmission electron microscopy (TEM) and N₂ adsorption–desorption measurement indicate that the RuO₂·xH₂O particle is approximately 30–40 nm with mesoporous structure. The crystalline structure and the electrochemical properties of RuO₂·xH₂O have been systematically explored as a function of annealing temperature. At lower temperatures, the RuO₂·xH₂O powder was found in an amorphous phase and the maximum capacitance of 655 F g⁻¹ was obtained by annealing at 150 °C. Higher temperatures (exceeding 175 °C) presumably converted amorphous phase into crystalline one and the corresponding specific capacitance dropped rapidly from 547 F g⁻¹ at 175 °C to 87 F g⁻¹ at 400 °C. Also, the dependence of electrochemical performance on annealing conditions of RuO₂·xH₂O was investigated by electrical impedance spectroscopy (EIS) study.     

MgO-templated nitrogen-containing carbons derived from different organic compounds for capacitor electrodes

Carbons containing nitrogen (C-N composites) were derived from three commercial organic compounds, poly(vinylpyrrolidone) (PVP), polyacrylamide (PAA), and trimethylolmelamine (TMM) using the MgO template method. The C-N composites formed in nitrogen at 700-1000 °C had nitrogen content, W_N, of 3-23 mass% and the specific surface area by N₂ adsorption, S_BET, of 60-2000 m² g⁻¹ without activation. Generally high nitrogen content of the starting compound led to larger W_N, but W_N was not proportional to the N/C mole ratio in the compounds. The value of S_BET strongly depended on the compound: S_BET (PVP) > S_BET (PAA) ? S_BET (TMM). There was a tendency for W_N to decrease with increasing S_BET. The capacitance measured in 1 mol dm⁻³ H₂SO₄ by cyclic voltammetry, C_M in F g⁻¹, suggested that both W_N and S_BET are influential in gaining large C_M. For the composites with W_N > 5 mass%, the capacitance normalized by S_BET, C_A = C_M/S_BET, was 0.17-0.65 F m⁻², which was larger than the electric double layer capacitance (0.05-0.15 F m⁻²), indicating that the pseudo-capacitance contributes significantly to C_M. The value of C_A increased with increasing W_N, but a correlation between C_A and particular nitrogen species on the surface measured by XPS was obscure. It was suggested that the large C_A is not simply explained by redox reactions of the surface functional groups. The composite derived from PAA at 900 °C showed 234 F g⁻¹ at 2 mV s⁻¹ and 181 F g⁻¹ at 100 mV s⁻¹ with acceptable yield of the composite.     

Supercapacitors incorporating hollow cobalt sulfide hexagonal nanosheets

We have prepared hollow cobalt sulfide (CoS) hexagonal nanosheets (HNSs) from Co(NO₃)₂ and thioacetamide in the presence of poly(vinylpyrrolidone) (PVP) at 100 °C under alkaline condition. The as-prepared hollow CoS HNSs have an average edge length ca. 110 ± 27 nm and an outer shell of 16 ± 4 nm in thickness from 500 counts. The CoS HNSs are deposited onto transparent fluorine-doped tin oxide (FTO) substrates through a drop-dry process to prepare two types of supercapacitors (SCs); high rate and large per-area capacitance. The electrolyte used in this study is KOH_(aq). The CoS HNSs (8 μg cm⁻²) electrodes exhibit excellent capacity properties, including high energy density (13.2 h kg⁻¹), power density (17.5 kW kg⁻¹), energy deliverable efficiency (81.3-85.3%), and stable cycle life (over 10,000 cycles) at a high discharge current density of 64.6 A g⁻¹. With their fast charging and discharging rates (<3 s), the CoS HNSs show characteristics of high-rate SCs. The CoS HNS SCs having high mass loading (9.7 mg cm⁻²) provide high per-area capacitance of 1.35 F cm⁻² and per-mass capacitance of 138 F g⁻¹, respectively, showing characteristics of SCs with large per-area capacitance. Our results have demonstrated the potential of the CoS HNS electrodes hold great practical potential in many fields such as automobile and computer industries.     

Layered lithium cobalt nitrides: A new class of lithium intercalation compounds

Lithium cobalt nitrides Li_3−2xCo_xN (0.1 ≤ x ≤ 0.44) have been prepared and investigated as negative electrode in the 1/0.02 V potential window. The evolution of the unit cell parameters and unit cell volume with the Co content show a solid solution behaviour. Whatever the Co content, all these nitrides are electroactive with a single step around 0.6 V/0.7 V for the discharge and charge processes, respectively. The electrochemical behaviour observed is typical of a Li intercalation compound and involves the Co²⁺/Co⁺ redox couple in the interlayer plane combined with the reversible accommodation of Li⁺ ions in the cation vacancies located in Li₂N⁻ layers. XRD experiments performed after discharge, charge and cycling tests clearly indicate the hexagonal layered structure of the host lattice is maintained. This intercalation process explains the excellent capacity retention found after 50 cycles. A specific capacity of 180 mAh g⁻¹ at C/20 and 130 mAh g⁻¹ at C/5 rate (100 mA cm⁻²) is achieved for Li_2.23Co_0.39N. ac impedance measurements have allowed to characterize the kinetics of the reaction.     

Effect of electrodeposition conditions on the electrochemical capacitive behavior of synthesized manganese oxide electrodes

Galvanostatic electrodeposition techniques were applied for the preparation of novel electroactive manganese oxide electrodes. The effects of supersaturation ratio on the morphology and crystal structure of electrodeposited manganese oxide were studied. Manganese oxide electrodes were synthesized by anodic deposition from acetate-containing aqueous solutions on Au coated Si substrates through the control of nucleation and growth processes. By changing deposition parameters, a series of nanocrystalline manganese oxide electrodes with various morphologies (continuous coatings, rod-like structures, aggregated rods and thin sheets) and an antifluorite-type crystal structure was obtained. Detailed chemical and microstructural characterization of as-deposited electrodes was conducted using SEM, TEM and AAS. Manganese oxide thin sheets show instantaneous nucleation and single crystalline growth, rods have a mix of instantaneous/progressive nucleation and polycrystalline growth and continuous coatings form by progressive nucleation and polycrystalline growth.In addition, the electrochemical behavior was investigated by cyclic voltammetry. The experimental results show that manganese oxide electrodes, with rod-like and thin sheet morphology, exhibited enhanced electrochemical performance. The highest specific capacitance (∼230 F g⁻¹) and capacitance retention rates (∼88%) were obtained for manganese oxide thin sheets after 250 cycles in 0.5 M Na₂SO₄ at 20 mV s⁻¹.     

Comparative study of EC/DMC LiTFSI and LiPF6 electrolytes for electrochemical storage

Lithium bis(trifluoromethane sulfonyl) imide (LiTFSI) salt are potentially a good alternative to LiPF₆ since it could both improve the chemical and thermal stability as salt for electrolyte. This work presents a systematic comparative study between LiPF₆ and LiTFSI in a mixture of EC/DMC on the basis of some of their physicochemical properties. Transport properties (viscosity and conductivity) are compared at various temperatures from −20 to 80 °C. Using Walden rule, we have demonstrated that LiTFSI 1 M in EC/DMC is more ionic than LiPF₆ 1 M in the same binary solvent. Moreover, the electrochemical storage properties of an activated carbon electrode were investigated in EC/DMC mixture containing LiTFSI or LiPF₆. The specific capacitance C_s of activated carbon was determined from the Galvanostatic charge-discharge curve between 2 and 3.7 V, at low current densities. The capacitance values were found to be 100 and 90 F g⁻¹ respectively for LiTFSI and LiPF₆ electrolytes at 2 mA g⁻¹. On the basis of the physicochemical and electrochemical measurements, we have correlated the improvement of the specific capacitance with activated carbon to the increase of the ionicity of the LiTFSI salt in EC/DMC binary system. The drawback concerning the corrosion of aluminium collectors was resolved by adding a few percentage of LiPF₆ (1%) in the binary electrolyte. Finally, we have studied the electrochemical behavior of intercalation-deintercalation of lithium in the graphite electrode with EC/DMC + LiTFSI as electrolyte. Results of this study indicate that the realization of asymmetric graphite/activated carbon supercapacitors with LiFTSI based electrolyte is possible.