Characteristics of Modified β‐Cyclodextrin Bound to Cellulose Powder

Monochlorotriazinyl‐β‐cyclodextrin (MCT‐β‐CD) was covalently bonded to cellulose powder. The amount of MCT‐β‐CD bonded to cellulose could be determined by infrared spectroscopy. The coupling reaction was characterized as a physical adsorption of the MCT‐β‐CD on the cellulose powder followed by an apparently zero order chemical reaction. The reaction rate constant was found to be k = 6.43 · 10^‐4 ± 0.11 · 10^‐4 g g^‐1 s^‐1. The immobilized cyclodextrin was able to include and release d‐limonene as a model flavor compound. The maximum molar inclusion ratio was 0.85, which is the same inclusion ratio as for d‐limonene in native β‐cyclodextrin. The release rates of dlimonene included in the fixed MCT‐β‐CD were monitored at various relative humidities and 50 °C. The release kinetics could be modeled using the Avrami equation. These results demonstrate that flavors as well as other hydrophobic compounds can be included and released from MCT‐β‐CD immobilized on cellulose.     

Structural characterisation of β‐cyclodextrin crosslinked by adipic acid

This study was conducted to investigate the structural characterisation of β‐cyclodextrin (β‐CD) crosslinked by adipic acid. β‐CD was treated with different concentrations (0%, 5%, 10% and 15%, w/v) of adipic acid. Different instruments, such as scanning electron microsope (SEM), Fourier‐transform infrared (FT‐IR) spectroscopy and ¹H and ¹³C nuclear magnetic resonance (NMR) spectra were used to find out chemical structure in the crosslinked β‐CD. SEM analysis suggested that crosslinking β‐CD with 15% adipic acid changed the original morphology and considerably increased the particle size of the raw material. FT‐IR spectroscopy data showed that an intensive absorption band at 1706 cm^?1 was present in the β‐CD samples treated with 10% and 15% adipic acid, indicating a crosslinking between hydroxyl groups of β‐CD and carboxyl groups of adipic acid. NMR spectra revealed that the ester linkages between hydroxyl groups of β‐CD and carboxyl groups of adipic acid were formed after crosslinking of β‐CD with adipic acid.     

Influence of high-intensity pulsed electric field processing on lipoxygenase and β-glucosidase activities in strawberry juice

The influence of high-intensity pulsed electric field (HIPEF) parameters, pulse frequency, pulse width and pulse polarity in strawberry juice lipoxygenase (LOX) and β-glucosidase (β-GLUC) was studied using a response surface methodology. The studied parameters affected on both residual enzymatic activities at unchanging electric field strength of 35 kV/cm and treatment time for 1000 μs. The contour plots showed a minimum defined space where residual activity of LOX remained at 65% and 70% in monopolar and bipolar mode, respectively. Low pulse frequencies (up to 61.6 Hz) in monopolar treatments as well as pulse frequencies and widths higher than 218 Hz and 5.4 μs in bipolar treatments did not have any effect on LOX inactivation. On the other hand, the higher the pulse frequency and pulse width, the higher the β-GLUC inactivation obtained. Moreover, when the HIPEF treatment was applied in monopolar mode, an enhancement in β-GLUC activity was observed in most of the experimental range. HIPEF treatments have demonstrated adequately that can reduce activity of enzymes that are involved in the formation of desirable flavor compounds, helping processors to obtain juices that keep their fresh flavor.

Industrial relevance

High-intensity pulsed electric fields (HIPEF) have proved to be effective in the interaction of microorganisms and enzymes in juices, maintaining their quality and freshness.HIPEF juice processing has demonstrated to have some advantages with regard to conventional thermal treatment. HIPEF treatments can reduce adequately enzymes that are involved in the formation of desirable flavor or color compounds. Thus, HIPEF technology can help processors to obtain juices that keep their fresh flavor by achieving optimal inactivation of related enzymes. This would prevent the product from undesirable off-flavor formation, which in turn would result in greater acceptability by consumers.     

Extraction of Epigallocatechin Gallate and Epicatechin Gallate from Tea Leaves Using β‐Cyclodextrin

Use of organic solvents to extract phenolic compounds from plants may result in environmental pollution and cause health problems in persons. Replacing organic extraction solvents by green extracting agents without affecting the extraction yield is one of the most pressing problems to be solved. The aim of this study is to evaluate the capacity of β‐cyclodextrin (β‐CD) to recover phenolic compounds from tea leaves. The extract obtained using the ethanol/water mixture presented the highest total phenolic content, followed by those obtained using β‐CD solution and water. HPLC analysis of the extracts showed that the addition of β‐CD to the extracting agent had a selective effect on the extraction of epigallocatechin gallate (EGCG) and epicatechin gallate (ECG). The extraction yield of EGCG and ECG using 15 g/L β‐CD were higher than that obtained using water and 50% ethanol. Molecular docking results indicated that the molecules of EGCG and ECG were more inclined to interact with β‐CD than epigallocatechin, epicatechin, and gallocatechin. The impact of β‐CD concentration, temperature, and time on EGCG and ECG extraction from tea leaves was investigated and the maximum amount of EGCG (118.7 mg/g) and ECG (54.6 mg/g) were achieved when extracted with 25 g/L aqueous β‐CD solution at 60 °C for 60 min. The present study indicates that aqueous β‐CD can be used as an alternative to organic solvents to recover EGCG and ECG from tea leaves.     

Characterization of the Supermolecular Structure of Polydatin/6‐O‐α‐Maltosyl‐β‐cyclodextrin Inclusion Complex

Polydatin is the main bioactive ingredient in many medicinal plants, such as Hu‐zhang (Polygonum cuspidatum), with many bioactivities. However, its poor aqueous solubility restricts its application in functional food. In this work, 6‐O‐α‐Maltosyl‐β‐cyclodextrin (Malt‐β‐CD), a new kind of β‐CD derivative was used to enhance the aqueous solubility and stability of polydatin by forming the inclusion complex. The phase solubility study showed that polydatin and Malt‐β‐CD could form the complex with the stoichiometric ratio of 1:1. The supermolecular structure of the polydatin/Malt‐β‐CD complex was characterized by ultraviolet–visible spectroscopy (UV), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffractometry (XRD), thermogravimetric/differential scanning calorimetry (TG/DSC), and proton nuclear magnetic resonance (¹H‐NMR) spectroscopy. The changes of the characteristic spectral and thermal properties of polydatin suggested that polydatin could entrap inside the cavity of Malt‐β‐CD. Furthermore, to reasonably understand the complexation mode, the supermolecular structure of polydatin/Malt‐β‐CD inclusion complex was postulated by a molecular docking method based on Autodock 4.2.3. It was clearly observed that the ring B of polydatin oriented toward the narrow rim of Malt‐β‐CD with ring A and glucosyl group practically exposed to the wide rim by hydrogen bonding, which was in a good agreement with the spectral data.     

Effects of pulsed electric field on selected properties of L‐tryptophan

The effects of pulsed electric fields (PEF) treatment on the solubility, surface tension and fluorescence spectra of L‐tryptophan were systematically investigated using a range of PEF intensities (0–50 kV cm^?1) and a number of pulses (0–216). PEF frequency and pulse width used in this experiment were 1000 Hz and 40 μs, respectively. Under these conditions, the solubility, pH value and maximum relative fluorescence value (RFV) of L‐tryptophan were generally increased and then decreased with both increasing the PEF intensity and pulse number. Conductivity of the solution was insensitive to changes but still increased slightly with increasing the PEF intensity. In addition, surface tension was decreased at higher PEF intensity and pulse number. Results from the mass spectrum analysis confirmed that after the PEF treatment, the basic structure of L‐tryptophan remained unchanged. These results suggested that PEF treatment induced some function alteration to the isolated L‐tryptophan without changing the basic structure.     

Screening of β‐Glucosidase and β‐Xylosidase Activities in Four Non‐Saccharomyces Yeast Isolates

The finding of new isolates of non‐Saccharomyces yeasts, showing beneficial enzymes (such as β‐glucosidase and β‐xylosidase), can contribute to the production of quality wines. In a selection and characterization program, we have studied 114 isolates of non‐Saccharomyces yeasts. Four isolates were selected because of their both high β‐glucosidase and β‐xylosidase activities. The ribosomal D1/D2 regions were sequenced to identify them as Pichia membranifaciens Pm7, Hanseniaspora vineae Hv3, H. uvarum Hu8, and Wickerhamomyces anomalus Wa1. The induction process was optimized to be carried on YNB‐medium supplemented with 4% xylan, inoculated with 106 cfu/mL and incubated 48 h at 28 °C without agitation. Most of the strains had a pH optimum of 5.0 to 6.0 for both the β‐glucosidase and β‐xylosidase activities. The effect of sugars was different for each isolate and activity. Each isolate showed a characteristic set of inhibition, enhancement or null effect for β‐glucosidase and β‐xylosidase. The volatile compounds liberated from wine incubated with each of the 4 yeasts were also studied, showing an overall terpene increase (1.1 to 1.3‐folds) when wines were treated with non‐Saccharomyces isolates. In detail, terpineol, 4‐vinyl‐phenol and 2‐methoxy‐4‐vinylphenol increased after the addition of Hanseniaspora isolates. Wines treated with Hanseniaspora, Wickerhamomyces, or Pichia produced more 2‐phenyl ethanol than those inoculated with other yeasts.     

Production,Characterization, and Stability of Orange or Eucalyptus Essential Oil/β‐Cyclodextrin Inclusion Complex

The aim of this study was to produce and characterize inclusion complexes (IC) between β‐cyclodextrin (β‐CD) and orange essential oil (OEO) or eucalyptus essential oil (EEO), and to compare these with their pure compounds and physical mixtures. The samples were evaluated by chemical composition, morphology, thermal stability, and volatile compounds by static headspace‐gas chromatography (SH‐GC). Comparing the free essential oil and physical mixture with the inclusion complex, of both essential oils (OEO and EEO), it was observed differences occurred in the chemical composition, thermal stability, and morphology. These differences show that there was the formation of the inclusion complex and demonstrate the necessity of the precipitation method used to guarantee the interaction between β‐CD and essential oils. The slow loss of the volatile compounds from both essential oils, when complexed with β‐CD, showed a higher stability when compared with their physical mixtures and free essential oils. Therefore, the results showed that the chemical composition, molecular size, and structure of the essential oils influence the characteristics of the inclusion complexes. The application of the β‐CD in the formation of inclusion complexes with essential oils can expand the potential applications in foods.     

Purification and physicochemical characterization of ovine β‐lactoglobulin and α‐lactalbumin

Ovine whey proteins were fractionated and studied by using different analytical techniques. Anion‐exchange chromatography and reversed‐phase high‐performance liquid chromatography (HPLC) showed the presence of two fractions of β‐lactoglobulin but only one of α‐lactalbumin. Gel permeation and sodium dodecyl sulfate (SDS)‐polyacrylamide gel electrophoresis allowed the calculation of the apparent molecular mass of each component, while HPLC coupled to electrospray ionisation‐mass spectrometry (ESI‐MS) technique, giving the exact molecular masses, demonstrated the presence of two variants A and B of ovine β‐lactoglobulin. Amino acid compositions of the two variants of β‐lactoglobulin differed only in their His and Tyr contents. Circular dichroism spectroscopy profiles showed pH conformation changes of each component. The thermograms of the different whey protein components showed a higher heat resistance of β‐lactoglobulin A compared to β‐lactoglobulin B at pH 2, and indicated high instability of ovine α‐lactalbumin at this pH.     

Protein stability function relations: native β‐lactoglobulin sulphhydryl–disulphide exchange with PDS

Intermolecular sulphhydryl–disulphide exchange with β‐lactoglobulin dimer occurs when this dissociates to form monomers exposing two SH groups. This notion is re‐evaluated in the light of recent structural data suggesting that the degree of SH group exposure in β‐lactoglobulin is unaffected by dissociation. β‐Lactoglobulin was treated with 2,2′‐dipyridyl disulphide (PDS). The rate of sulphhydryl–disulphide exchange was measured at sub‐denaturation temperatures of 25–60 ° C. Parallel studies were conducted by reacting PDS with reduced glutathione (GSH). The SH group of GSH was up to 31 000 times more reactive than β‐lactoglobulin. At pH 7 the reaction activation enthalpy (ΔH^#) and entropy (ΔS^#) was 26 kJ mol⁻¹ and −100 J mol⁻¹ K⁻¹ respectively for GSH. For β‐lactoglobulin, ΔH^# was 157.2 kJ mol⁻¹ and ΔS^# was 254 J mol⁻¹ K⁻¹. At pH 2.6, ΔH^# was 14.4 kJ mol⁻¹ and ΔS^# was −213 J mol⁻¹ K⁻¹ for GSH. The corresponding results for β‐lactoglobulin were 20.3 kJ mol⁻¹ and −147 J mol⁻¹ K⁻¹. These and other thermodynamic results are discussed in terms of the effects of β‐lactoglobulin conformational structure and stability on SH group reactivity. For native β‐lactoglobulin at neutral pH, intermolecular sulphhydryl–disulphide exchange appears to involve the dissociated monomer. SH group activation probably arises from the lower structural stability of the monomer relative to the dimer. At pH 2.6 the mechanism of SH–disulphide exchange does not require protein dissociation and probably involves breathing motions or localised changes in protein structure. © 2000 Society of Chemical Industry     

Optimisation of cross‐linking β‐cyclodextrin and its recycling efficiency for cholesterol removal in milk and cream

This study was carried out to investigate the optimum conditions of cross‐linking β‐cyclodextrin (β‐CD) and recycling for cholesterol removal in milk and cream. The cross‐linked β‐CD was prepared with a 15% adipic acid solution, and the water solubility of the β‐CD was measured for the optimum conditions based on mixing temperature, mixing time, cross‐linking temperature, cross‐linking reaction time and cooling time. In the results of this study, optimum conditions were 80 °C mixing temperature, 2 h mixing time, 60 °C cross‐linking temperature, 24 h cross‐linking reaction time and 48 h cooling time. After determining the optimum conditions, the recyclable yields of the cross‐linked β‐CD ranged from 90.01% to 55.17% in six recyclings and the percentage of cholesterol removal by 15% cross‐linked β‐CD was over 90% until eighth recycling. On the basis of the results, this study suggests that 15% adipic acid‐added cross‐linked β‐CD maximised recyclable yield and that cholesterol removal was improved during recycling.