数字调谐LC带通滤波器设计与实现

使用射频电子设计自动化(EDA)模拟软件先进设计系统(ADS)建立电感耦合谐振器电路仿真模型,设计出一种高性能的数字调谐LC带通滤波器。选择高品质因数(Q)值的射频元器件,在合理的驱动电路控制下,在30~110 MHz频率范围内该滤波器能实现10μs内的频率调谐,并具有良好滤波器宽带电性能。实验表明,该滤波器的电性能测试数据与仿真结果吻合。     

数字调谐LC带通滤波器设计

通过使用具有高效设计和优化功能的射频EDA仿真软件模拟多种方案电路的结果对比,优选设计出一种高性能的数字调谐LC带通滤波器。在数字部分的解码,驱动电路的控制下,滤波器能够在频带内实现10μs级的频率调谐,并保持良好性能的可靠性。实验证明,调谐滤波器工作在超短波频段,其测试结果与仿真曲线基本一致。     

基于ADS的平行耦合带通滤波器的设计

文中介绍了设计平行耦合带通滤波器的方法和流程,以相对带宽为9%的平行耦合滤波器为例阐述了具体设计过程,并对滤波器设计工程中原理图与版图仿真结果的差异进行分析对比,给出具体的调试解决方案.借助于射频微波EDA工具ADS2008进行优化仿真.高效地完成了带通滤波器的设计,达到了设计要求.     

阶梯阻抗谐振器在微波双通带滤波器设计中的应用

阶梯阻抗谐振器（Stepped Impedance Resonator）寄生响应的位置可以通过调整谐振器阻抗比来控制,该特性使SIR成为设计双通带滤波器的理想谐振器。设计耦合谐振器双通带滤波器需要对两组外部品质因数和耦合系数进行综合,为了减少谐振器的数量同时简化耦合系数的提取,本文采用特定耦合结构设计滤波器,并研究了影响SIR主响应和第一寄生响应处外部品质因数的因素,设计了中心频率是1.9GHz和3.2GHz,部分带宽是5%和7%的双通带滤波器。仿真结果验证了设计方法的可行性。     

一种新型开路环谐振带通滤波器

利用开路环终端的内部电容耦合效应,提出一种结构紧凑,具有小型化和良好的二阶和三阶谐波抑制能力的开路环谐振器窄带带通滤波器.分析了开路环终端电容内部耦合结构变化对带通滤波器谐波抑制特性的影响,并利用上述结构仿真和设计了一个中心频率为1.5 GHz的带通滤波器,模拟结果与实验结果吻合良好,验证了滤波器的设计思想.     

微带抽头线发夹型带通滤波器的设计及优化

介绍一种用ADS( Advanced Design System)软件进行设计和优化微带抽头线发夹型带通滤波器.详细地给出了设计步骤及其各个参数的确定.以一个中心频率为4.8 GHz,带宽为200 MHz的微带带通滤波器的设计及优化为例,给出了仿真结果,并进一步给出了Momentum仿真结果.     

基于ADS的Ka波段平行耦合带通滤波器的设计

文中先是介绍了平行耦合带通滤波器的设计方法和流程,然后以中心频率为33G的平行耦合带通滤波器为例,具体说明了设计及优化过程.并在此基础上生成版图,之后导入到HFSS中进行仿真验证.两次的结果均符合设计要求.本文主要是在电路原理图级进行的设计,仿真,和优化.     

基于ADS的平行耦合微带线带通滤波器的设计及优化

介绍一种借助ADS(Advanced Design System)软件进行设计和优化平行耦合微带线带通滤波器的方法,给出了清晰的设计步骤,最后结合设计方法利用ADS给出一个中心频率为2.6 GHz,带宽为200 MHz的微带带通滤波器的设计及优化实例和仿真结果,并进一步给出电路版图Momentum仿真结果.仿真结果表明:这种方法是可行的,满足设计的要求.     

一种全容性耦合直线型介质波导滤波器的设计

文中设计了一种新型的全容性耦合直线型介质波导滤波器,由两个深的容性盲孔和一个浅的调试盲 孔组成容性耦合结构,产生弱感性耦合,使得通带高端产生传输零点,从而解决了一般直线型耦合滤波器难以实现 交叉耦合传输零点的问题,并满足了工业应用对滤波器外形“直入直出”的需求。依照仿真对滤波器进行实物加工, 测试的滤波器中心频率3. 5 GHz,当频率在3. 42 ~3. 58 GHz 时,带内插入损耗小于1 dB,回波损耗小于15 dB,在带 外频率3. 8 GHz 处产生传输零点。测试结果与仿真结果高度吻合,验证了该滤波器结构简单、易于调谐、滤波性能良 好,能够满足基站通信的应用需求。     

LTCC宽边耦合交指型超宽带滤波器设计

提出用交指型结构实现超宽带（UWB）带通滤波器的小型化,并给出了设计方法。该结构通过宽边耦合实现超宽带滤波器需要的较大耦合系数,并通过加宽带状线谐振器的宽度减少不必要的交叉耦合,简化了滤波器的设计。最终设计了一个中心频率为f0,相对带宽为58%的六阶交指带通滤波器,滤波器尺寸仅为8 mm×11 mm。从仿真结果看,该滤波器保持了传统交指型滤波器阻带特性好,寄生通带远的优点。     

一种新颖微带双通带带通滤波器的设计方法

本文提出了一种新颖的微带双通带带通滤波器的设计方法。该微带双通带滤波器由两个中心频率不同的滤波器组成,并采用耦合线实现外部耦合。设计中引入源与负载之间的耦合,得到了额外的有限频率传输零点,改善了滤波器的衰减特性。通过调节源与负载之间耦合的强弱,可以适当地调节传输零点的位置。经设计并加工了一款4阶微带开环结构双通带滤波器,实测响应与仿真响应吻合较好,验证了该方法的有效性。     

X波段腔体带通滤波器的设计与实现

通过耦合系数法设计滤波器,并通过HFSS进行精确仿真,采用时域调试法完成调试,大大缩短了研制周期,实现了X波段内三个不同中心频率的腔体带通滤波器,具有相对较高的中心频率且腔数多达10。经测试表明,所有滤波器均具有较低的通带插入损耗和较高的带外抑制。     

基于HFSS设计同轴腔调谐滤波器

同轴腔调谐滤波器在军事通信设备中具有广泛应用.论述了该类滤波器的设计原理,详细分析了腔间耦合孔和输入、输出耦合环的位置和大小的设计,在此基础上应用高频结构仿真软件(HFSS),对L波段调谐滤波器的实例进行仿真设计.结果表明仿真拟合准确,说明应用HFSS仿真软件能够很好的描述调谐滤波器的关键设计内容.     

An Analytic Design Method for Microstrip Tunable Filters

This paper describes an analytic design procedure for microstrip tunable filters. Step-impedance resonators are employed and loaded with varactors for achieving agility in the filter response. Fixed lumped capacitors are utilized as admittance inverters in order to minimize the number of varactors in the filter. An analytic approach for filter design makes it possible to achieve a tunable filter showing the same frequency response when the center frequency is adjusted. A two-pole microstrip tunable filter whose center frequency can be adjusted from 1.1 to 1.5 GHz is designed to demonstrate the validity of design theory. A prototype tunable filter operating from 2.1 to 2.7 GHz is also designed and measured. A good agreement between the measured and simulated results is shown. Finally, three- and four-pole tunable filters are designed to show straightforward application of the presented design method to higher order tunable filter design.      

Pi型电感耦合LTCC滤波器的寄生感性耦合研究

对二阶Pi型电感耦合LTCC滤波器中各个元件的电容及电感寄生效应进行了分析,提出了一种新的寄生电感耦合分析方法,并根据分析结果设计了一个二阶Pi型电感耦合和一个二阶Pi型电容耦合LTCC带通滤波器,其中,电感耦合滤波器的设计指标为:中心频率2.45GHz,相对带宽32.65%,带内插入损耗2dB,回波损耗18 dB;电...     

Design of stable IIR digital filter based on least P-power error criterion

In this paper, the least p-power error criterion is presented to design digital infinite impulse response (IIR) filters to have an arbitrarily prescribed frequency response. First, an iterative quadratic programming (QP) method is used to design a stable unconstrained one-dimensional IIR filter whose optimal filter coefficients are obtained by solving the QP problem in each iteration. Then, the proposed method is extended to design constrained IIR filters and two-dimensional IIR filters with a separable denominator polynomial. Finally, design examples of the low-pass filter are demonstrated to illustrate the effectiveness of the proposed iterative QP method.     

Design of doubly complementary filters with approximate linearphase

A new procedure for the design of a real doubly complementary (DC) pair of digital filters obtained from an all-pass structure is presented. The filter design is based on a zero-phase FIR filter design with multi-band frequency specifications and approximate linear-phase characteristic. The resulting complex or real all-pass filter structure is guaranteed to be stable. Some examples illustrating the design method including comparisons with conventional approximately linear phase IIR filters are also shown     

双模方形带通滤波器的分析、建模及设计

本文报道一种利用谐振器中缺口位置设计双模带通滤波器的新方法.用这种方法既可以实现具有一对传输零点的双模带通滤波器,也可以实现无传输零点的双模带通滤波器.通过分析缺口位置对谐振器内电场模式分布的影响,建立了双模滤波器的拓扑结构图.利用全波仿真软件,基于不同的缺口位置设计了中心频率为2.05GHz,带宽为100MHz的两种...     

Digital filter design techniques in the frequency domain

Digital filtering is the process of spectrum shaping using digital components as the basic elements. Increasing speed and decreasing size and cost of digital components make it likely that digital filtering, already used extensively in the computer simulation of analog filters, will perform, in real-time devices, the functions which are now performed almost exclusively by analog components. In this paper, using the z-transform calculus, several digital filter design techniques are reviewed, and new ones are presented. One technique can be used to design a digital filter whose impulse response is like that of a given analog filter; other techniques are suitable for the design of a digital filter meeting frequency response criteria. Another technique yields digital filters with linear phase, specified frequency response, and controlled impulse response duration. The effect of digital arithmetic on the behavior of digital filters is also considered.     

Theory and design of two-parallelogram filter banks

It is well known that the analysis and synthesis filters of orthonormal DFT filter banks can not have good frequency selectivity. The reason for this is that each of the analysis and synthesis filters have only one passband. Such frequency stacking (or configuration) in general does not allow alias cancellation when the individual filters have good stopband attenuation. A frequency stacking of this nature is called nonpermissible and should be avoided if good filters are desired. In a usual M-channel filter bank with real-coefficient filters, the analysis and synthesis filters have two passbands. It can be shown that the configuration is permissible in this case. Many designs proposed in the past demonstrate that filter banks with such configurations can have perfect reconstruction and be good filters at the same time. We develop the two-parallelogram filter banks, which is the class of 2-D filter banks in which the supports of the analysis and synthesis filters consist of two parallelograms. The two-parallelogram filter banks are analyzed from a pictorial viewpoint by exploiting the concept of permissibility. Based on this analysis, we construct and design a special type of two-parallelogram filter banks, namely, cosine-modulated filter banks (CMFB). In two-parallelogram CMFB, the analysis and synthesis filters are cosine-modulated versions of a prototype that has a parallelogram support. Necessary and sufficient conditions for perfect reconstruction of two-parallelogram CMFB are derived