Effects of Y2O3 on Thermal Shock of Al2O3／TiCN Composites

Advancedstructuralceramics ,suchasoxides ,nitridesandcarbides ,havebecomepreferredrefracto rymaterialsforaviation ,spaceflight ,energyandmet allurgybecauseoftheirchemicalstability ,creepresis tanceandhightemperaturestrength .Buttheyareaf fectedgreatlybyte…     

Effects of Cerium Oxide on Ni／Al2O3 Catalysts for Decomposition of CH4 and C2H4

Characteristics of carbon deposition of CH4 and C2H4 decomposition over supported Ni and Ni-Ce catalysts were studied by using a pulse reaction as well as BET, TPR, XPS and hydrogen chemisorption techniques. It is found that there is a metal-semiconductor interaction (MScI) in the Ni-Ce catalyst, and the effect of MScI on the carbon deposition of CH4 decomposition is opposite to that of C2H4. A novel model of carbon deposition of CH4 or C2H4 decomposition was proposed.     

Influence of Composition of Sm2O3-Containing Rare Earth Glass on Its Absorption Spectrum

Lanthanidemetalsarethe 5 7thto 71thelementsintheperiodictable ,thetrivalentionsforlanthanideareofvalenceelectronshell 4f0～ 14 6s2 ,whicharefairlystablewhenthe 4felectronsub layerisemptyoral mostempty ,halffullorfull .Becauseofbigenergydifferencebetweenba…     

Role of Cr2O3 on formation of reaction sintered dense ZrO2–Al2O3–SiO2 based refractory materials

Abstract

Extremely dense zirconia–mullite composites were developed by reaction sintering of microcalcined fine alumina powder and zircon flour taken in different ratios with Cr₂O₃ as an additive. The powder mixes were isostatically pressed and sintered at 1550°C. The sintered compacts were characterised by different physicomechanical properties, microstructure developed and phase compositions. Cr₂O₃ exhibited positive influence up to certain level of addition on the thermomechanical properties of reaction sintered zirconia–mullite composites including corrosion resistance and microstructure.

On a développé des composites extrêmement denses de zircone et mullite par frittage réactif de poudre fine d’alumine micro calcinée et de farine de zircone en différentes proportions, avec du Cr₂O₃ comme adjuvant. On a pressé les mélanges de poudres au moyen d’une presse isostatique et on les a frittés à 1550°C. On a caractérisé les différentes propriétés physico mécaniques, la microstructure développée et la composition de phases des compacts frittés. Le Cr₂O₃ exhibait une influence positive jusqu’à un certain niveau d’addition sur les propriétés thermomécaniques des composites de zircone et mullite à frittage réactif, incluant la résistance à la corrosion et la microstructure.     

Influence of B2O3 on Spectroscopic Properties of Er^3＋/Yb^3＋ Co-Doped Tungsten-Tellurite Glasses

A series of novel Er^3＋/Yb^3＋ co-doped （85- x ） TeO2-15WO3-xB2O3 （TWB;x=2%,5%,8%（mole fraction） ） glasses were prepared. Influence of B203 on the spectroscopic properties of Er^3＋/Yb^3＋ co-doped tungsten-tellurite glasses were investigated. It is found that the intensity of 1.5μm fluorescence, lifetime of the ^4I13/2 level and upconversion fluorescence all decrease with the increase of B2O3 content. The product of full width at half maximum （FWHM） and stimulated emission cross-section （σe^peak） of Er^3＋ ：^4I13/2→^4I15/2 transition has an optimum when B203 is 5% （mole fraction）. The emission spectra of Er^3＋ ： ^4I13/2→^4I15/2 transition was analyzed using peak-fit routine, and an equivalent four-level system was proposed to estimate the stark splitting for the 411512 and ^4I13/2 levels of Er^3＋ ions in TWB glasses at room temperature.     

Effect of La2O3 on Microstructure and Transmittance of Transparent Alumina Ceramics

Optically transparent alumina ceramics were fabricated by conventional process and sintered without pressure in H2 atmosphere. The results indicate that relative densities of alumina specimens increase to theoretical densities （T. D. ） with increasing content of La2O3. With increasing holding time during sintering, much less pores and larger grains were found in the sintered alumina samples. Higher transmittance was achieved in alumina codoped with MgO and La2O3 as compared with that doped with MgO only. The total-transmittance of alumina sample is up to 86% at twavelength range of 300 - 800 nm.     

Al2O3/B4C复合材料性能的研究

采用凝胶注模成形工艺制备Al2O3/B4C芯块,研究其真空烧结性能.通过热分析仪、扫描电镜(SEM)、X射线衍射(XRD),考察了Al2O3/B4C复合材料DTA、结构、形貌和相态.结果表明:在1 600℃以上Al2O3与B4C反应,生成Al8B2O15等低熔点化合物,有利于提高Al2O3/B4C芯块致密性,但同时会产...     

Study on Preparation and Properties of La2O3/MC Nylon Nanocomposites

MC nylon,monomer casting nylon,is a newtypeof engineering plastics,whichis synthesized by anion-ic polymerization with caprolactam as the major rawmaterial,under normal pressure,pouring directlyto amould preheatedto a certaintemperature.It has manyadvantages,such as low polymerized temperature,si mple technology,high crystallinity,low-cost,highequipment efficiency as well as good mechanical prop-erties,shock decrease but wear proof,corrosion-resis-ting,self-ubricant,chemicals-resisting,wide us…     

Study on Sulfation of CeO2/γ-Al2O3 Sorbent in Simulated Flue Gas

It is well known that sulfur dioxide(SO2) , morethan50%of which arise fromcombustion of fossil fu-els ,are precursors of acidrain andtheir emission pos-es a global threat tothe atmosphere .Environmental a-gencies have ,therefore ,regulated emissions of SO…     

Theoretical Analysis on Tensile Strength of ZA22/Al2O3 Short Fiber Composite Added with Ce

ＴｈｅｏｒｅｔｉｃａｌＡｎａｌｙｓｉｓｏｎＴｅｎｓｉｌｅＳｔｒｅｎｇｔｈｏｆＺＡ２２／Ａｌ２Ｏ３ＳｈｏｒｔＦｉｂｅｒＣｏｍｐｏｓｉｔｅＡｄｄｅｄｗｉｔｈＣｅＹｕＳｉｒｏｎｇ（于思荣）１，ＨｅＺｈｅｎｍｉｎｇ（何镇明）２，ＲｅｎＬｕｑｕａｎ（任露泉）１...     

Surface Oxidation of Al2O3/SiC Nanocomposite： Phase Transformation and Microstructure

The surface oxidation behavior of pressureless sintered Al2O3/SiC nanocomposite was studied from 1000 to 1400 ℃ for more than 10 h in air. Weight gain during the process of heat treatment was measured by TG analysis. Phase transformation and microstructure changes of these specimens due to oxidation were investigated with X-ray diffraction (XRD), SEM and EDX technology. Thermogravimetric analysis show that the weight gain as a result of oxidation of SiC become significant above 1200 ℃. In the range of 1000～1300 ℃, the SiC grits are usually coated with a layer of amorphous silica after oxidation. Above 1300 ℃, the amorphous silica reacted with alumina matrix and formed mullite or crystallized into cristobalite. The rate of oxidation depends on the formation of dense cristobalite film. Large amount of needle-like mullite and alumina crystals are formed on the surface after oxidation at 1400 ℃.     

添加ZrO2-SiC复合粉体对Al2 O3 -C质耐火材料抗热震性能的影响

以电熔刚玉、天然石墨以及利用碳热还原法合成的ZrO2-SiC复合粉体为原料制备了Al2O3-C质耐火材料,研究了ZrO2-SiC复合粉体加入量对Al2O3-C质耐火材料抗热震性能的影响.结果表明:添加质量分数为4%的ZrO2-SiC复合粉体试样的显气孔率最低为18.8%;添加6%ZrO2-SiC复合粉体的试样,在1 200 ℃的温度下热震次数达到10次后,其表面并未出现明显裂纹,且其残余耐压强度为16.71 MPa,耐压强度保持率为40.9%,具有良好的抗热震性能.     

Study on UV Excitation Properties of Eu^3＋ at S6 Site in Bulk and Nanocrystalline Cubic Y2O3

Increases of emission intensities for Eu^3 at the S6 site relative to that at the C2 site were observed as UV excitation wavelength decreases from 300 nm to 200 nm in both bulk and nanocrystalline cubic Y2O3:Eu^3 . Decomposition of excitation spectra shows that the charge transfer band of Eu^3 at the S6 site lies in the high-energy side of that at the C2 site, resulting in that the energy transfer from the host prefers to the S6 site. Detailed emission and excitation spectral characteristics were analyzed and discussed. In addition, spectral red-shift were found in both charge transfer bands in nanocrystalline Y2O3: Eu^3 compared to the bulk material. The number ratio of S6 sites to C2 sites is also smaller in nanocrystalline Y2O3:Eu^3 than that in the bulk one.     

Investigation on pumping oxygen characteristics of （Bi2O3）0.73（Y2O3）0.27 solid electrolyte

（Bi2O3）0.73（Y2O3）0.27 fine powders prepared by wet chemical precipitation method were cold isostatically pressed to form solid electrolyte tubes, and sintered at 900 ℃ for 10 h in the air. Their pumping oxygen characteristics in non-dehydrated Ar gas were investigated, where a ZrO2 （Y2O3 stabilized） oxygen sensor was used to measure the oxygen partial pressure Po2. The results showed that the Po2 value reached magnitudes of 1×10^-2-1×10^-10 Pa at the applied pumping oxygen voltage of 0.5 V, 1×10^-37-1×10^-27 Pa at 1.0 V and 1×10^-53-1×10^47 Pa at 2.0 V within the temperature range from 550 to 650 ℃. Moreover, no cracks were found in the tested solid electrolyte tubes. Thus, the Bi2O3-Y2O3 system might be used in solid electrolyte oxygen pump for purifying gases.     

Effects of Doping Trace Sm^3＋ and Gd^3＋ on Luminescent Character of Y2O2S：Eu^3＋

After trace Sm^3＋ ions and Gd^3＋ ions doping, the emission intensity of red phosphors Y2O2S： Eu^3 ＋ was enhanced and the voltage character （relation between emission intensity and excitation voltage） was improved while the other properties of physics and chemistry were not changed. The origins of enhancement and improvement are discussed. Probably the distortion and the defect of crystals are decreased by the substitution of Gd^3＋ for Y^3＋ instead of Eu^3＋ for Y^3＋ , and thus the Eu^3＋ crystal field is improved, and radiationless process and energy loss resulted from crystal defect are weakened, which leads to increased luminescence intensity and voltage character improvement. The overlapping fluorescent spectra of Y2O2S： Sm^3＋ emission and Y2O2S：Eu^3＋ excitation as well as Eu^3 ＋ excitation spectra transitions spectra lead to energy transfer from Sm^3 ＋ sensitization of Sm^3＋ ions fectively. containing Sm^3＋ excitation the possibility of resonance ions to Eu^3＋ ions, and the to Eu^3＋ ions is achieved effectively.     

Investigation of Chemical Bond Properties and Moessbauer Spectroscopy in YBa2 Cu3O7

Chemical bond properties of YBa2Cu3O7 were studied by using the average band-gap model. The calculated resuits show that the covalency of Cu(1)-O bond is 0. 406, and one of Cu(2) -O is 0.276. Moessbauer isomer shifts of ^57Fe in Y-123 were calculated by the chemical surrounding factor h,defined by covalency and electronic polarizability.The charge-state and site of Fe were determined. The relation between the coupling constant of electron-phonon interaction and covalency is employed to explain that the Cu(2)-O plane is more important than the Cu(1)-O chain on the super-conductivity in the Y-123 compounds.     

Methane Combustion and TPR/TPO Properties of Pd/CexZr1-xO2/Al2O3 Catalysts

Methane Combustion and TPR/TPO Properties of Pd/Ce_xZr_ 1-xO_2/Al_2O_3 Catalysts     

Kinetics of Reduction of Iron Oxide in CaO-SiO_2-Al_2O_3-Fe_tO Slags with Graphite Powder

ＫｉｎｅｔｉｃｓｏｆＲｅｄｕｃｔｉｏｎｏｆＩｒｏｎＯｘｉｄｅｉｎＣａＯ┐ＳｉＯ２┐Ａｌ２Ｏ３┐ＦｅｔＯＳｌａｇｓｗｉｔｈＧｒａｐｈｉｔｅＰｏｗｄｅｒＹａｎｇＸｕｅｍｉｎ①，ＨｕａｎｇＤｉａｎｂｉｎｇ②，ＫｏｎｇＬｉｎｇｔａｎ②，ＹａｎｇＴｉａｎｊｕｎ...