Luminescent properties of long lasting phosphor Ca2MgSi2O7:Eu

Long afterglow phosphors (Ca_1−xEu_x)₂MgSi₂O₇ (0.002 ≤ x ≤ 0.02) were prepared by solid-state reactions under a weak reductive atmosphere. X-ray diffraction pattern, photoluminescence spectra, decay curve, afterglow spectra and thermoluminescence curves were investigated. The phosphors showed two emission peaks when they were excited by 343 nm, due to two types of Eu²⁺ centers existing in the Ca₂MgSi₂O₇ lattice. However, only one emission peak can be found in their afterglow spectra. Energy transfer between Eu²⁺ ions in inequivalent sites was found. A possible mechanism was presented and discussed. The afterglow decay time of Ca_1.998MgSi₂O₇:Eu_0.002 was nearly 12.5 h which means it was a good long lasting phosphor.     

Luminescence properties of Eu-activated Ca12Al10.6Si3.4O32Cl5.4: A promising phosphor for solid state lighting

In this article, we synthesized and characterized a novel bluish green phosphor for white light-emitting diodes, Eu²⁺-activated Ca₁₂Al_10.6Si_3.4O₃₂Cl_5.4. The phosphor shows broad and strong absorption in the region (320-450 nm), which is essential for improving the efficiency and quality of white light-emitting diodes. When excited at 380 nm, the phosphor shows two emission bands at around 425 and 500 nm. The main emission peak of Eu²⁺-activated Ca₁₂Al_10.6Si_3.4O₃₂Cl_5.4 exhibits red shift in comparison with that of Eu²⁺-activated Ca₁₂Al₁₄O₃₃, which is due to the introduction of Si and Cl ions. The results show Ca₁₂Al_10.6Si_3.4O₃₂Cl_5.4 is a promising host candidate for the phosphors.     

A yellow-emitting Ca3Si2O7: Eu phosphor for white LEDs

A series of yellow-emitting phosphors based on a silicate host matrix, Ca_3 − xSi₂O₇: xEu²⁺, was prepared by solid-state reaction method. The structure and photoluminescent properties of the phosphors were investigated. The XRD results show that the Eu²⁺ substitution of Ca²⁺ does not change the structure of Ca₃Si₂O₇ host and there is no impurity phase for x < 0.12. The SEM images display that phosphors aggregate obviously and the shape of the phosphor particle is irregular. The EDX results reveal that the phosphors consist of Ca, Si, O, Eu and the concentration of these elements is close to the stoichiometric composition. The Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be excited at a wavelength of 300-490 nm, which is suitable for the emission band of near ultraviolet or blue light-emitting-diode (LED) chips. The phosphors exhibit a broad emission region from 520 to 650 nm and the emission peak centered at 568 nm. In addition, the shape and the position of the emission peak are not influenced by the Eu²⁺ concentration and excitation wavelength. The phosphor for x = 0.045 has the strongest excitation and emission intensity, and the Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be used as candidates for the white LEDs.     

Influence of calcination temperature on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol–gel-combustion processing

The detailed preparation process of Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ phosphor powders with red long afterglow by sol–gel-combustion method in the reducing atmosphere is reported. X-ray diffraction, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the effects of synthesis temperature on the crystal characteristics, morphology and luminescent properties of the as-synthesized Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors. The results reveal that Sr₃Al₂O₆ crystallizes completely when the combustion ash is sintered at 1200 °C. The excitation and the emission spectra indicate that the excitation broad-band lies chiefly in visible range and the phosphor powders emit strong light at 618 nm under the excitation of 472 nm. The light intensity and the light-lasting time of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors are increased when increasing the calcination temperatures from 1050 to 1200 °C. The afterglow of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors sintered at 1200 °C lasts for over 600 s when the excited source is cut off. The red emission mechanism is discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions.     

Luminescence and energy transfer of Mn co-doped SrSi2O2N2:Eu green-emitting phosphors

Eu²⁺ and Mn²⁺ co-doped SrSi₂O₂N₂ green-phosphors, with promising luminescent properties (examined by their powder diffuse reflection, photoluminescence excitation and emission spectra) suitable for UV converted white LEDs, were produced by high temperature solid-state reaction method. The produced materials exhibited intense broad absorption bands at 220–500 nm and a broad emission band centered at ca. 530 nm, attributed to 4f–5d transitions of Eu²⁺. The emission intensity of Eu²⁺ ions was greatly enhanced by introducing Mn²⁺ ions into SrSi₂O₂N₂:Eu²⁺ due to the energy transfer from Mn²⁺ to Eu²⁺. The energy transfer probability from Mn²⁺ to Eu²⁺ depends strongly on the Mn²⁺ concentration, which is maximized at a Mn²⁺ concentration of 3 mol%. It drastically decreases for higher concentrations. The results indicated that SrSi₂O₂N₂:Eu²⁺, Mn²⁺ is a promising green-emitting phosphor for white-light emitting diodes with near-UV LED chips.     

Photoluminescence of Tb and Mn activated Ca8MgGd(PO4)7 under vacuum ultraviolet excitation

Novel Tb³⁺ and Mn²⁺ activated Ca₈MgGd(PO₄)₇ phosphors were synthesized by solid-state reaction and their photoluminescence properties in vacuum ultraviolet region were investigated for the first time. It can be observed from the excitation spectra that the host-related absorption band is located around 170 nm, and it overlaps the O²⁻ → Tb³⁺ charge transfer band of Ca₈MgGd(PO₄)₇:Tb³⁺ around 161 nm and the 3d⁵ → 3d⁴4s transition band of Ca₈MgGd(PO₄)₇:Mn²⁺ near 200 nm. The 4f-4f 5d spin-allowed and spin-forbidden transitions of Tb³⁺ are verified to be located at 170-250 and 257-271 nm, respectively. Upon 147 nm excitation, the dominant emission peak intensity of the Ca₈MgGd_0.1(PO₄)₇:0.9Tb³⁺ phosphor is about 2.7 times stronger than that of the commercial Zn₂SiO₄:Mn²⁺ green phosphor, and the brightness of the former with a short decay time of 2.5 ms is about 98% of the latter’s. The Ca₈MgGd(PO₄):Mn²⁺ phosphor excited at 147 nm exhibits a deep red emission around 650 nm, which could be attributed to the ⁴T₁ → ⁶A₁ transition of Mn²⁺, with the CIE index (0.679, 0.321). In a word, the results above indicate that both Tb³⁺ and Mn²⁺ activated Ca₈MgGd(PO₄)₇ phosphors could be promising for PDP or Hg-free lamp applications.     

Sr3.5Mg0.5Si3O8Cl4: Eu bluish-green-emitting phosphor for NUV-based LED

Sr₄Si₃O₈Cl₄:Eu²⁺ and Sr_3.5Mg_0.5Si₃O₈Cl₄:Eu²⁺ phosphors were prepared by a conventional solid state reaction (SS). Excited by 370 nm near-ultraviolet light, the phosphors show an efficient bluish-green wide-band emission centering at 484 nm, which originates from the 4f5d¹ → 4f⁷ transition of Eu²⁺ ion. The excitation spectra of the phosphors are a broad band extending from 250 nm to 400 nm. Mg²⁺-codoping greatly enhances the bluish-green emission of the phosphors. An LED was fabricated by coating the Sr_3.5Mg_0.5Si₃O₈Cl₄:0.08Eu²⁺ phosphor onto an ~ 370 nm-emitting InGaN chip. The LED exhibits bright bluish-green emission under a forward bias of 20 mA. The results indicate that Sr_3.5Mg_0.5Si₃O₈Cl₄:0.08Eu²⁺ is a candidate as a bluish-green component for fabrication of NUV-based white LEDs.     

Influence of excitation wavelengths on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol-gel-combustion processing

Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ red-emitting long afterglow phosphor was synthesized by sol-gel-combustion methods using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, Eu₂O₃, Dy₂O₃, H₃BO₃ and C₆H₈O₇·H₂O as raw materials. The crystalline structure of the phosphors were characterized by X-ray diffraction, luminescent properties of phosphors were analyzed by fluorescence spectrophotometer. The effect of excitation wavelengths on the luminescent properties of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors was discussed. The emission peak of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor lays at 516 nm under the excitation of 360 nm, and at 612 nm under the excitation of 468 nm. The results reveal that the Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor will emit a yellow-green light upon UV illumination, and a bright red light upon visible light illumination. The emission mechanism was discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions in Sr₃Al₂O₆. The afterglow time of (Sr_0.94Eu_0.03Dy_0.03)₃ Al₂O₆ phosphors lasts for over 600s after the excited source was cut off.     

Synthesis and luminescence properties of Ca8NaGd(PO4)6F2: Eu2+, Mn2+ for white LEDs

A series of luminescent emission-tunable phosphors Ca₈NaGd(PO₄)₆F₂: Eu²⁺, Mn²⁺ have been prepared by a combustion-assisted synthesis method. The X-ray diffraction measurement results indicate that the crystal structure of the phosphor is a single phase of Ca₈NaGd(PO₄)₆F₂. The photoluminescence (PL) properties of Eu²⁺ and Mn²⁺-codoped Ca₈NaGd(PO₄)₆F₂ phosphors were also investigated. The phosphors can be efficiently excited by ultraviolet (UV) light and show a blue emission band at about 450 nm and a yellow emission band at about 574 nm, which originated from the Eu²⁺ ions and the Mn²⁺ ions, respectively. The efficient energy transfer from the Eu²⁺ ions to the Mn²⁺ ions was observed and its mechanism should be a resonant type via a nonradiative dipole–quadrupole interaction. A color-tunable emission in Ca₈NaGd(PO₄)₆F₂ phosphors can be realized by Eu²⁺ → Mn²⁺ energy transfer. Our results indicate that the developed phosphor may be used as a potential white emitting phosphor for UV based white LEDs.     

Enhancement of red emission intensity of Ca9Y(VO4)7:Eu phosphor via Bi co-doping for the application to white LEDs

The present investigation aims at the luminescence properties of Ca₉Y(VO₄)₇:Eu³⁺, Bi³⁺ red phosphor materials. The red emission at 613 nm originating from ⁵D₀–⁷F₂ transition of Eu³⁺ in Ca₉Y(VO₄)₇ is enhanced strongly with Bi³⁺–V⁵⁺ couple as the sensitizer, under excitation either into the ⁵L₆ state or the ⁵D₂ state. The energy transfer from Bi³⁺–V⁵⁺ to Eu³⁺ is discussed. For a fixed Eu³⁺ concentration, there is an optimal Bi³⁺ concentration with 15 mol%, at which the maximum luminescence intensity of Eu³⁺ is achieved. The red emission of Ca₉Y(VO₄)₇:0.8Eu³⁺, 0.15Bi³⁺ (under 395 nm and 465 nm excitations) is stronger than that of commercial Y₂O₃:Eu³⁺ phosphor (under 395 nm and 467 nm excitations). Based on the ratios of the red emission at 613 nm to orange one at 592 nm, it is considered that the symmetry of Eu³⁺ site decreases with doping of Bi³⁺, leading to more opposite parity components. Lifetime and diffuse reflection spectra measurements indicate that the red emission enhancement is due to the enhanced transition probabilities from the ground state to ⁵L₆ and ⁵D₂ states of Eu³⁺ in the distorted crystal field. Therefore the present material is a promising red-emitting phosphor for white-light diodes with near-ultraviolet/blue GaN-based chips.     

Crystal growth and photoluminescence characteristics of Ca2MgSi2O7:Eu3+ thin films grown by pulsed laser deposition

Ca₂MgSi₂O₇:Eu³⁺ films were deposited on Al₂O₃ (0 0 0 1) substrates by pulsed laser deposition. The films were grown at various oxygen pressures ranging from 100 to 400 mTorr. The crystallinity and surface morphology of the films were examined by X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. XRD and AFM respectively showed that the Ca₂MgSi₂O₇:Eu³⁺ films had a zircon structure and consisted of homogeneous grains ranging from 100 to 400 nm depending on the deposition conditions. The radiation emitted was dominated by a red emission peak at 620 nm. The maximum PL intensity of the Ca₂MgSi₂O₇:Eu³⁺ films grown at 300 mTorr was increased by a factor of 1.3 compared to that of Ca₂MgSi₂O₇:Eu³⁺ films grown at 100 mTorr. The crystallinity, surface roughness and photoluminescence of the thin-film phosphors were strongly dependent on the deposition conditions, in particular, the oxygen partial pressure.     

Sol-gel composition of multicomponent hybrid precursors to long afterglow of CaxSr1 − xAl2O4: Eu phosphors

Ca_xSr_1 − xAl₂O₄: Eu²⁺ photoluminescent materials with high brightness and long afterglow were in situ synthesized by hybrid precursor assembly sol-gel technology in a reductive atmosphere. The particle size of luminescent materials is in the range of 30-60 nm by the estimation of XRD. And SEM shows that there exists uniform morphology and microstructure owing to the hybrid precursors. The influence of co-doping Ca²⁺ and Sr²⁺ on the luminescence of the phosphor was studied. Their excitation and emission spectra were very similar to that of SrAl₂O₄: Eu²⁺ phosphors and all of them have long afterglow phenomenon. Changing the co-doping concentrations of Ca²⁺ and Sr²⁺ in Ca_xSr_1 − xAl₂O₄: Eu²⁺ phosphors, the luminescent intensities are different. When the proportion of Ca and Sr is 6 to 4, the phosphor reaches the strongest emitting intensity.     

Synthesis and photoluminescence properties of a new red emitting phosphor: Ca3(VO4)2:Eu; Mn

A new red emitting phosphor, Ca₃(VO₄)₂:Eu³⁺; Mn²⁺, was synthesized by a citric acid sol-gel combustion method and characterized by XRD, TEM and photoluminescence (PL) spectra. The red emission located at about 613 nm was ascribed to ⁵D₀-⁷F₂ transition of Eu³⁺. And the red luminescence intensity changed with annealing temperature and concentration of Eu³⁺. The effect of the co-doped Mn²⁺ was also investigated systematically.     

The photoluminescence properties of Y2O3:Eu prepared by surfactant assisted co-precipitation-molten salt synthesis

Y₂O₃:Eu³⁺ red phosphors were prepared by surfactant assisted co-precipitation-molten salt synthesis method. The effects of surfactant content and annealing temperature on the structure and luminescence were investigated by X-ray diffraction and fluorescence spectrophotometer. The use of surfactant reduces the impurities on the surface of particles and promotes the reaction. The color purity of as-prepared Y₂O₃:Eu³⁺ red phosphors is improved with the presence of surfactant. In the excitation spectra, two strong bands at 394 and 466 nm are attributed to ⁷F_0,1-⁵L₆, ⁷F_0,1-⁵D₂ transitions of Eu³⁺ ions respectively. With the excitation of 394 or 466 nm, the as-fabricated samples reveal excellent red emission as high as that of samples monitored by 254 nm. Thus, the Y₂O₃:Eu³⁺ is a promising red phosphor for ultraviolet-visible light-emitting diodes.     

Luminescence properties and energy transfer of Ba2Mg(PO4)2:Eu2+, Mn2+ phosphor synthesized by co-precipitation method

The Ba₂Mg(PO₄)₂:Eu²⁺, Mn²⁺ phosphor is synthesized by a co-precipitation method. Crystal phase, morphology, excitation and emission spectra of sample phosphors are analyzed by XRD, SEM and FL, respectively. The results indicate particles synthesized by a co-precipitation method have a smaller size in diameter than that synthesized by conventional solid-state reaction method. Emission spectra of BMP:Eu²⁺, Mn²⁺ phosphor show a broad blue and a broad yellow emission bands with two peaks at about 456 nm and 575 nm under 380 nm excitation. An overlap between Eu²⁺ emission band and Mn²⁺ excitation band proves the existence of energy transfer from Eu²⁺ to Mn²⁺. Emitting color of the BMP:Eu²⁺, Mn²⁺ phosphor could be tuned by adjusting relative contents of Eu²⁺ and Mn²⁺ owing to energy transfer formula. Therefore, BMP:Eu²⁺, Mn²⁺ may be considered as a potential candidate for phosphor for near-UV white LED.     

A potential Eu-activated Ca10K(PO4)7 red phosphor for white light-emitting diodes

New red Ca₁₀K(PO₄)₇:Eu³⁺, K⁺ phosphors were synthesized by solid state reaction and their photoluminescence properties as well as those by co-doping Mo⁶⁺ under near ultraviolet excitation were investigated. From the excitation spectra monitored at 611 nm, it can be seen that the strongest excitation peak is situated at 393 nm, well matching with the emission wavelength of near-ultraviolet chips for white LEDs. Upon 393 nm excitation, the brightness of Ca₉K(PO₄)₇:0.5Eu³⁺, 0.5 K⁺ with the optimal Eu³⁺-doping concentration is about 2.3 times stronger than that of the commercial red Y₂O₃:Eu³⁺ phosphor. The introducing of Mo⁶⁺, which results in a possible variety for the excited energy level of the host, can enhance the brightness of Eu³⁺ to be maximized by about 15%. The CIE chromaticity coordinates of Ca₉K(PO₄)₇:0.5Eu³⁺, 0.5 K⁺ are calculated to (0.654, 0.345), which are close to the (0.67, 0.33) standard of the National Television System Committee. All the above results indicate Eu³⁺-activated Ca₁₀K(PO₄)₇ is a potential candidate for white LEDs.     

Luminescence characterization of (Ca1−xSrx)(S1−ySey):Eu,M (M = Sc and Y) for high color rendering white LED

The highly efficient red phosphors (Ca_1−xSr_x)(S_1−ySe_y):Eu²⁺,M³⁺ (M = Sc and Y) were prepared, starting from CaCO₃, SrCO₃, Eu₂O₃, Sc₂O₃, Y₂O₃, S, and SeO₂ with a flux, by a conventional solid-state reaction. The optimized red phosphors converted 11.8% (Sc³⁺) and 11.7% (Y³⁺) of the absorbed blue light into luminescence. These quantum values are much higher than Q = 3.0% of CaS:Eu²⁺. For the fabrication of light-emitting diodes (LEDs), the prepared phosphors were coated with MgO from non-aqueous solution to overcome their weakness against moisture. White LEDs were fabricated by pasting the prepared red phosphors and the yellow YAG:Ce³⁺ phosphor on an InGaN blue chip (λ_ems = 446.5 nm). The incorporation of the red phosphor to the YAG:Ce³⁺ phosphor resulted in an improved color rendering index (Ra) from 70 to 80.     

The persistent energy transfer of Eu and Mn and the thermoluminescence properties of long-lasting phosphor Sr3MgSi2O8:Eu, Mn, Dy

Eu²⁺, Mn²⁺ and Dy³⁺ co-doped long-lasting phosphors Sr₃MgSi₂O₈ were prepared by a solid-state reaction under a reductive atmosphere. Fluorescence spectra demonstrated that the weak red emission resulting from the forbidden transition of Mn²⁺ could be enhanced by the energy transfer from Eu²⁺ to Mn²⁺. The energy transfer between Eu²⁺ and Mn²⁺ was systematically investigated. The phosphorescence spectra revealed that Eu²⁺ could persistently transfer its energy to Mn²⁺ after removing the excitation source. The duration of Mn²⁺ can prolong to more than 2 h. The thermoluminescence spectra were used to characterize the ability of the trap to trapping the carriers. By the analysis of the ionization potentials, the roles of Mn²⁺ and Dy³⁺ in the afterglow process were discussed. A possible afterglow mechanism was presented and discussed.     

Luminescent properties of Ca2MgSi2O7 phosphor activated by Eu2+, Dy3+ and Nd3+

Long lasting alkaline earth silicates, Ca₂MgSi₂O₇:Eu,Dy,Nd was prepared under a reduction atmosphere through solid state reaction. The obtained phosphor was characterized by means of X-ray diffraction (XRD) and photoluminescence spectrum (PLS). The crystal structure of Ca₂MgSi₂O₇:Eu,Dy,Nd phosphor was refined by Rietveld analysis. The obtained Ca₂MgSi₂O₇:Eu,Dy,Nd phosphor showed a yellow–green emission peaking at 518 nm, which is ascribed to the luminescent emission of the Eu²⁺ that occupied the octa-coordinated Ca²⁺ sites in the Ca₂MgSi₂O₇ host. The electron affinity (ea) value for Eu²⁺ in [EuO₈] was calculated to 1.9 eV. The decay profile and the emission spectrum indicated that when the value of Dy/Eu is increasing, there is a concentration quenching of Eu²⁺.     

Luminescent properties of Sr2P2O7:Eu,Mn phosphor under near UV excitation

The phosphors in the system Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ were synthesized by solid-state reactions and their photoluminescence properties were investigated. These phosphors have strong absorption in the near UV region, which is suitable for excitation of ultraviolet light emitting diodes (UVLEDs). The orange-reddish emission of Mn²⁺ in these phosphors can be used as a red component in the tri-color system and may be enhanced by adjusting the Mn²⁺/Eu²⁺ ratio. The energy transfer from Eu²⁺ to Mn²⁺ is observed with a transfer efficiency of ∼0.45 and a critical distance of ∼10 Å. The results reveal that Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ phosphors could be used in white light UVLEDs.