Preparation and growth mechanism of nickel nanowires under applied magnetic field

Nano-Micro Letters - Nickel nanowires with large aspect ratio of up to 300 have been prepared by a hydrazine hydrate reduction method under applied magnetic field. The diameter of nickel nanowires...     

Synthesis and magnetic properties of shuriken-like nickel nanoparticles

Shuriken-like nickel nanoparticles were successfully synthesized by a thermal decomposition method at 200 °C with Nickel(II) acetylacetonate (Ni(acac)₂) as the precursor and oleylamine (OAm) as the solvent and reductant, respectively. The phase structures, morphologies and sizes, and magnetic properties of the as-synthesized nickel products were characterized in detail by using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission-scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and vibrating sample magnetometer (VSM). Some key reaction parameters, such as the reaction time, reaction temperature and surfactants, have important influence on the morphology of the final products. XRD pattern indicated that the products are well-crystallized face-centered cubic (fcc) nickel phase. SEM images demonstrated that the nickel nanoparticles are shuriken-like morphology with average size around 150 nm. The mechanism of shuriken-like Ni nanoparticles (NPs) is proposed. The magnetic hysteresis loops of shuriken-like and spherical nickel products illustrated the ferromagnetic nature at 300 K, indicating its potential applications in magnetic storage.     

镍源对自蔓延高温合成Ni0.35Zn0.65Fe2O4的影响

在空气中（无磁场）和1.3T外磁场下, 采用Fe、Fe₂O₃、ZnO、NaClO₄分别与Ni粉、NiO和NiCO₃进行了自蔓延高温合成Ni_0.35Zn_0.65Fe₂O₄的实验研究, 用红外测温仪测试坯料的燃烧温度, 应用XRD、SEM和VSM分别观察镍源变化对燃烧产物和烧结后样品性能的影响. 结果表明：采用氧化亚镍和镍粉得到的镍锌铁氧体样品无杂相存在, 磁性能较好, 有较低的矫顽力和较大的比饱和磁化强度; 采用碳酸镍自蔓延高温合成的镍锌铁氧体含有杂相, 磁性能也相应较差. 在外磁场下自蔓延高温合成镍锌铁氧体的比饱和磁化强度得到了一定的提高. 镍粉可以取代氧化亚镍作为自蔓延高温合成镍锌铁氧体的镍源.     

The effect of magnetic layer thickness on magnetic properties of Fe/Cu multilayer nanowires

Fe/Cu multilayer nanowires were ac-pulse electrodeposited into the anodic aluminum oxide templates prepared by a two-step mild anodization technique. Transmission electron microscopy images showed the distinct layers with a relatively high contrast. A highly pure layer (∼99%) was achieved by tuning the proper ions ratio and optimizing the off-time between pulses of each layer in the single electrodeposition bath. Fe/Cu multilayer nanowires with 38 nm diameter were obtained. The effect of reducing the Fe layer thickness on the magnetic properties of Fe/Cu multilayer nanowires was investigated. It was seen that reducing the Fe layer thickness, thereby variation of rode- to disc-like multilayer nanowires, caused to rotate the magnetic easy axis from parallel to perpendicular to the wires axis.     

Study on the structures and magnetic properties of Ni, Co-Al2O3 electrodeposited nanowire arrays

We report on the direct electrodeposition of nickel and cobalt nanowire arrays within the nanopores of ordered porous alumina films prepared by a two-step anodization. SEM and TEM images reveal that the pore arrays are regularly arranged throughout the alumina film. X-ray diffraction and TEM analysis show that the nickel and cobalt nanowires are single crystalline with highly preferential orientation. The aspect ratio of nanowires is over 300. M-H hysteresis loops determined by VSM indicate that the nanowire arrays obtained possess obvious magnetic anisotropy. Because of proper square ratio and coercivity the nanowire arrays of nickel seem to be more suitable candidates for perpendicular magnetic recording medium than those of cobalt.     

Synthesis and characterization of cobalt–nickel alloy nanowires

We report on the synthesis and magnetic characterization of ordered arrays of cobalt–nickel alloy nanowires. These alloy nanowires were electrodeposited into the pores of anodic alumina templates. The physical properties of the samples were investigated using scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, and vibrating sample magnetometer. We found that for the alloy nanowires the field at which the magnetization saturates increases with increasing Co fraction and the saturation field in the normal direction is smaller than the parallel direction, indicating easy magnetization direction normal to wire axis. Nanowires with different compositional ratio of cobalt and nickel showed a nonlinear dependence of coercivity as a function of cobalt concentration. These findings will help tailor magnetic nanoalloys with controlled properties for various applications, such as high density magnetic storage or nanoelectrode arrays.     

Magnetic behavior of cobalt ferrite nanowires prepared by template-assisted technique

Spinel cobalt ferrite nanowires were successfully prepared in mesoporous silica SBA-15 as a host matrix followed by slow thermal decomposition of the precursors inside the silica-based template. The formation and phase control of as-synthesized nanostructured cobalt ferrites were confirmed by X-ray diffraction (XRD) measurements at different annealing temperatures ranging from 500 to 1000 °C. The one-dimensional spinel nanostructures were identified by recording the transmission electron microscopy (TEM) images after a selective removal of the silica template in aqueous solution of NaOH. The final product was also characterized using infrared spectroscopy (FT-IR) and vibration sample magnetometer (VSM). The presence of SBA-15 lowers the formation temperature of cobalt ferrite nanowires compared to the corresponding bulk material. The nanowires annealed up to 700 °C exhibited magnetic behavior characteristic for soft magnetic materials, whereas samples annealed at temperature higher than 700 °C revealed magnetic behavior characteristic for hard magnetic materials with rectangular form and large coercive field.     

Effect of a Magnetic Field on the Preparation of Silver Nanowires Using Solid Electrolyte Thin Films

The effect of an external magnetic field on the preparation of silver nanowires was studied. The silver nanowires were synthesized using solid electrolyte RbAg4I5 thin films by applying both a direct current （DC） electric field and a magnetic field. The RbAg4I5 thin films, which were prepared by deposition at room temperature and atmospheric pressure on a NaCI substrate, were used for the transfer of Ag^＋ ions between two Ag electrodes during the preparation process. When only the DC electric field is applied, the silver ions migrate toward the cathode. On the edge of the silver film at the cathode the Ag^＋ ions congregate to form aligned nanowires. If the magnetic field is also applied perpendicular to the DC electric field, the morphology of the nanowires can be controlled by rotating the sample in the magnetic field. Experimental results show that the growth of the silver nanowires is determined by the Ag^＋ ionic flux.     

超声场制备纳米镍粉的电化学性能研究

研究了乙二醇体系中,在超声场条件下,制备得到的纳米镍粉的性能.采用XRD进行了成分分析,SEM、TEM进行了微观形貌表征,对镍粉压制而成的电极进行了循环伏安测试.结果表明:与不加超声场条件相比,有超声场时制备得到的镍粉颗粒直径更小,颗粒分散度更好.超声场条件下制备的镍粉压制而成的电极在含有乙醇的1mol/L KOH溶液中进行循环伏安测试,与没有乙醇时相比,镍粉电极的氧化峰值电流密度增大,还原峰值电流密度相应地减小,表明对于乙醇的氧化还原反应来说超声场条件下制备的镍粉是一种有效的催化剂.同时与高纯镍块电极相比,在对乙醇的氧化方面纳米镍粉电极表现更高的电化学活性.     

Magnetically assembled 30 nm diameter nickel nanowire with ferromagnetic electrodes

Facile, cost-effective, and manufacturable techniques to create single-nanowire based devices with good electrical interconnects is demonstrated by combining template directed electrodeposition, magnetic assembly, and a post-annealing in a reducing environment. Nickel nanowires with a diameter of approximately 30?nm were electrodeposited from low-stress nickel sulfamate baths at room temperature using in-house made anodized alumina as a nanotemplate. After electrodeposition, nanowires were released from the template, efficiently positioned, trapped, and assembled on ferromagnetic electrodes using the magnetic interaction between the nanowires and the electrodes. By annealing the interconnect in a reducing environment of 5%H(2)+95%N(2) at 300?°C for 30?min, the interconnect's resistance was dramatically reduced from >10?M Ω to 835?Ω. Magnetotransport studies at 300?K on a single nickel interconnect with diameters ranging from 30 to 200?nm show a strong diameter dependent magnetoresistance, which might be attributed to different domain structure within the interconnect.     

Controlling the growth and field emission properties of silicide nanowire arrays by direct silicification of Ni foil

Nickel silicide nanowire arrays have been achieved by the decomposition of SiH(4) on Ni foil at 650?°C. It is indicated that the nickel silicide nanowires consist of roots with diameter of about 100-200?nm and tips with diameter of about 10-50?nm. A Ni diffusion controlled mechanism is proposed to explain the formation of the nickel silicide nanowires. Field emission measurement shows that the turn-on field of the nickel silicide nanowire arrays is low, at about 3.7?V?μm(-1), and the field enhancement factor is as high as 4280, so the arrays have promising applications as?emitters.     

Studies of the magnetic field intensity on the synthesis of chitosan-coated magnetite nanocomposites by co-precipitation method

Chitosan-coated magnetite nanocomposites (Fe₃O₄/CS) were prepared under different external magnetic field by co-precipitation method. The effects of the magnetic field intensity on phase composition, morphology and magnetic properties of the Fe₃O₄/CS nanocomposites were investigated by X-ray diffractometer (XRD), Fourier transform infrared analysis (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). The results showed that the intensity of the magnetic field in the co-precipitation reaction process did not result in the phase composition change of the magnetic chitosan but improved the crystallinity of magnetite. The morphology of Fe₃O₄/CS nanocomposites was greatly changed by the magnetic field. It was varied from random spherical particles to chain-like cluster structure and rod-like cluster structure with the magnetic field intensity increased in the synthetic process. The VSM results indicated that all the products had excellent superparamagnetic properties regardless of the presence or the absence of the magnetic field, and the saturation magnetization values of the Fe₃O₄/CS nanocomposites were significantly improved by the magnetic field.     

Electrodeposition and magnetic properties of three-dimensional bulk and shell nickel mesostructures

In this paper we demonstrate the electrodeposition of nickel, a common ferromagnetic material, in various magnetically desirable shapes including nanowires, nanoparticles and highly faceted shells. In order to obtain three dimensional mesostructures, the electrochemical deposition of nickel was performed on highly oriented pyrolytic graphite (HOPG) under different electrolyte composition and deposition potential conditions. Under potentiostatic deposition at one distinct potential negative with respect to the reversible potential of nickel, three stages of nucleation and growth take place leading to a complex morphology of deposits. However, dual-pulse potential deposition and electrodeposition in low pH solutions causing hydrogen evolution, lead to nickel deposits in the form of nanowires and nanoparticles with the complete absence of a faceted morphology. Highly faceted nickel shells were electrodeposited via a dual-bath method on prefabricated silver mesocrystals as 'template' electrodeposited on HOPG. Magnetic properties of faceted three dimensional nickel shells reveal clear signatures of facets of mesocrystals in the form of sharp steps in measured hysteresis loops and a strong magnetic anisotropy with respect to applied field direction.     

Étude par microscopie et diffraction électroniques de particules pentagonales de nickel obtenu par réduction d'un sel en phase liquide

Nickel particles prepared by reduction of a nickel salt in organic liquid media were investigated by electron diffraction and electron microscopy. Various shapes were observed for these particles, the mean size of which is about 300 Å. In this paper we report on the structure and morphology of particles with a hexagonal elongated shape and a pentagonal section. From dark field and bright field images and from diffraction patterns it is shown that the particles have a decahedral shape with anisotropic growth in the Λ₅ direction.     

Thermal Growth and Nanomagnetism of the Quasi-one Dimensional Iron Oxide

Quasi-one dimensional iron oxide nanowires with flat needle shape were synthesized on the iron powders by a rather simple catalyst-free thermal oxidation process in ambient atmosphere. The characterization by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman and high-resolution transmission electron microscopy (HRTEM) revealed that these nanostructures are single crystalline α-Fe2O3. The various dimensions with 40-170 nm in width and 1-8 μm in length were obtained by tuning the growth temperature from 280 to 480℃. A surface diffusion mechanism was proposed to account for the growth of quasi-one dimensional nanostructure. The typical α-Fe2O3 nanowires synthesized at 430℃ had a reduced Morin temperature TM of 131 K in comparison with their bulk counterpart. The coercivitis Hc of these nanowires are 321 and 65 Oe at 5 and 300 K, respectively. The temperature of synthesis also has important effects on the magnetic properties of these nanowires.     

Preparation of anisotropic transition metal phosphide nanocrystals: the case of nickel phosphide nanoplatelets, nanorods, and nanowires

We have synthesized anisotropic nickel phosphide nanocrystals, including triangular/hexagonal nanoplatelets, nanorods and nanowires, via a solution-phase synthetic method that uses nickel(II) acetylacetonate as a metal precursor and trioctylphosphine as a phosphorus source. Nickel phosphide nanoplatelets have been prepared from a one-pot reaction, and their dimensions in the length mostly vary from 20 to 50 nm, while their thicknesses are in a narrow range of 7-9 nm. Nickel phosphide nanorods with a width of approximately 6 nm and a typical length of 25-32 nm can be synthesized from either the one-pot reaction or the multi-injection approach, although the latter can generate nanorods with a much higher uniformity. A continuous injection approach has been used to synthesize nanowires that have a typical width of approximately 6 nm and a length ranging from tens of nanometers up to several hundred nanometers. Major factors that influence the growth of nickel phosphide nanocrystals have been investigated, and a multi-surfactant system is found to be essential for the formation of anisotropic nanostructure. Magnetic studies have revealed paramagnetic characteristics for all the synthesized samples.     

Preparation and characterization of nickel/zinc sulphide: Bifunctional magnetic-optical nanocomposites

Nickel nanoparticles coated with zinc sulphide can form complex spherical with a core–shell structure. This coating process was based on mercaptoacetic acid (HSCH₂COOH) as a primer to render the nickel surface vitreophilic, thus it renders nickel surface compatible with ZnS. The morphology, structure, chemical composition, optical properties and magnetic properties of the product were investigated by using various techniques, including transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), photoluminescence (PL) spectroscope and vibrating sample magnetometer (VSM). It was found that the Ni/ZnS nanocomposites exhibited both magnetic and photoluminescent properties.     

Facile fabrication of magnetic nanocomposites of ordered mesoporous carbon decorated with nNickel nanoparticles

A magnetic nanocomposite of ordered mesoporous carbon (CMK-3) decorated with nickel nanoparticles was synthesized successfully by a simple chemistry method. Nickel nanoparticles were prepared and uniformly supported on ordered mesoporous carbon CMK-3 by reduction route with CMK-3 as a reducing agent at 673 K. The Ni/CMK-3 composite materials were characterized by powder X-ray diffraction, nitrogen sorption, and transmission electron microscopy. As-prepared nickel nanoparticles supported on CMK-3 were crystalline with a face-center-cubic phase and a size distribution ranging from 10 to 60 nm. The BET special surface area and pore volume of Ni/CMK-3 were as high as 797 m2 g(-1) and 0.72 cm3 g(-1), respectively. The formation mechanism of the nickel nanoparticles outside the surface of CMK-3 was preliminarily discussed. The hysteresis loops of the CMK-3 decorated with nickel nanoparticles were measured by vibrating sample magnetometer (VSM), and the results showed that the composite was ferromagnetism with the saturated magnetization of 15 emu/g, and the coercivity value of 214 Oe. Furthermore, the application of Ni/CMK-3 as magnetically separable adsorbent for vitamin B2 was primarily examined in this study.     

Synthesis and characterisation of γ-Fe2O3 nanowire arrays via a versatile,simple and low-cost method

γ-Fe₂O₃ nanowire arrays embedded in anodic alumina template were fabricated by an improved sol–gel method. The morphologies, structures and magnetic behaviour of the as-prepared products were investigated by X-ray powder diffraction, transmission electron microscopy, selected area electron diffraction, field emission scanning electron microscopy and magnetic hysteresis analysis. The results show that arrayed γ-Fe₂O₃ polycrystalline nanowires with an average diameter about 40?nm and an average length about 0.5?µm were prepared. A number of superparamagnetic nanoneedles grew along the nanowires. The ordered one-dimensional arrays weaken the superparamagnetic effect. In addition, a possible formation mechanism about nanowires is proposed. The charge factor, gravity effect and molecular heat movement impelled the Fe sols filling into the pores of the template. γ-Fe₂O₃ nanowire arrays look forward to the applications of magnetic recording in the future.     

Simple method to synthesize nickel–gold composition nanostructure and their applications

Nickel nanochains assembled with submicrometer-sized flowers were synthesized through a mild hydrothermal method without any template and surfactant. Subsequently, nickel–gold metal composition nanostructures were also prepared by reduction reaction taking advantage of reducing property of nickel metal. The resulting chain superstructures were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy and the thermogravimetric analysis (TGA) measurement. This synthesis of such hierarchical structures implies a simple and inexpensive way to prepare bimetallic composite superstructures in a large-scale. Furthermore, these bimetallic composites could improve their antioxygenation properties.