Access数据库在采购管理中的应用

介绍了Access数据库的特点和优点,在采购管理中应用的意义.使用Access编写了<供应仓储管理系统>,论述了该系统的设计思想、程序结构及应用效果.该系统的应用,减轻了工作人员劳动强度、提高了工作效率、确保了物资及时供应、减少了资金的占压.     

抓斗吊车常见故障与解决措施

分析了20 t桥式抓斗起重吊车常见故障及原因,采取了相应的解决措施,从根本上杜绝了吊车的常见故障、节约了备件、降低了生产成本、减轻了维修人员劳动强度及提高了企业的经济效益.     

废水处理站自动控制系统的应用

介绍了邯钢冷轧废水站的配套项目废水处理站的自动控制系统,主要从自控设备组成、网络控制系统等方面论述了控制功能的实现,该系统的应用为ERP的数据采集提供了很好的保证,提高了电气控制的集成度和可靠性,简化了控制环节,提高了生产效率.     

“智能巡点检仪开发与应用”项目通过首钢科技成果验收评估

2012年1月9日,＂智能巡点检仪开发与应用＂项目通过了由首钢总公司组织的验收评估。该项目研发的设备智能巡点检仪使用可靠、运行稳定,各项功能和技术指标均达到设计要求,实现了与四级信息化系统的紧密集成和数据共享,提高了数据准确性和人力资源效率;优化了业务流程、加快了信息传递、深化了资源共享,有效减少了设备故障停机时间,提高了设备技术管理水平。     

TRT顶压控制系统及其安全性的研究与优化

介绍了天钢1~#TRT顶压控制系统,对现有的顶压控制系统进行了分析,在原有差压调节模式的基础上增加了顶压调节模式,将实际操作改为差压调节与顶压调节两种互选模式,提高了系统的发电效率;对旁通阀组的控制进行了优化,优化后极大地提高了系统的安全性,保证了炉顶压力的稳定,延长了设备的使用寿命,产生了较高的经济效益。     

ACS6000SD变频器在粗轧机主传动系统中的应用

济钢中厚板厂3500线粗轧机改造主传动系统采用ACS6000SD变频驱动系统,系统的整流侧和逆变侧采用了对称结构,降低了维护难度;采用了IGCT技术,保证了系统的性能响应;使用了DTC技术,提高了系统的鲁棒性。这种交直交系统做到了对电网的最少谐波运行,既减少了对电网的污染,又省去了无功补偿系统的投资。     

新型烧结增效剂的试用研究

介绍了该烧结增效剂的试用背景,简要分析了其基本机理。阐述了该增效剂在马钢的试用情况,并进行了效益评价,同时给出了改进意见。     

工业机器人在鞍钢型钢生产线的设计与应用

根据鞍钢股份有限公司型钢生产线工艺实际,制定了机器人硬件设计方案和机器人软件实现方案,实现了工业机器人自动贴标喷码技术在型钢生产线的应用.该系统的应用满足了产线工艺要求,提升了产线生产效率,提高了产品标识的准确性和可追溯性,贴标准确率和喷码准确率均达到了99％,实现了危险岗位无人作业,作业周期缩短了25％;同时,实现了产品标识的统一规范性,提升了企业产品形象.     

焦炉小烟道"下火"的原因分析及处理方法

分析了天铁1#、2#焦炉小烟道“下火”现象产生的原因,采取了措施加以解决,减少了事故的发生,延长了炉体使用寿命,降低了炼焦热能耗。     

图拉法粒化渣工艺的应用与改进

炼铁厂3^#高炉采用了图拉法粒化渣处理工艺，在设计、安装、试车过程中对其进行了改进。使之满足了生产要求，在15天内实现了稳定生产，取得了预期效果。     

EAF电极消耗对标指标分析

通过对电极消耗的原因及计算公式进行分析,发现将电极侧面、前端消耗速度指标作为描述电极消耗的对标指标,可使得不同装备下的电极消耗水平具有更好的可比性,可以使电极消耗工艺差距分析更为直接。     

降低转炉出钢温度的实践

钢水过程热损失主要为钢水的辐射散热,对流传热和钢包、中间包耐火材料的吸热。为了减少钢水的过程温降,相应采取了一系列措施：优化钢包保温层,降低包衬的导热系数,减轻包衬的热损失;对脱氧合金化用合金进行烘烤,提高合金加入钢水前的温度;大包加保温盖,实施全程保护浇注等。改进后,平均出钢温度降低20℃以上。     

Application of Rare Earth Phosphate Fertilizer in Western Area of China

Rare earth phosphate fertilizer (REPF) as base fertilizer (750 kg per hm2) was applied in the western area of China during the "Tenth Five-Year Plan", and the results show as follows: compared with calcium superphosphate (CK), REPF increases crops yields for maize by 17.0%, for rice by 10.5%, for wheat by 24.2%, for potato by 18.5%, for cabbage by 16.3%, for Chinese cabbage by 16.4%, for beet by 6.5%; decreases the diseased plant rate for common smut of maize by 1.0%, for maize stalk rot by 1.2%, for wheat take-all disease by 7.8%, for wheat root rot by 3.2%, for potato blackleg disease by 1.4%, for potato late blight by 6.6%; increases the sugar content of beet by 0.9°S.     

γ射线测厚仪补正机能的探讨

γ射线测厚仪的补正机能是厚度精确测量的关键，一般对热态钢板进行测量的测厚仪补正机能包括吸收补偿曲线、材质密度补正、温度补偿曲线、相互干涉补正。     

Investigation of Flow Upstream of Orifices

A physical model study is conducted to investigate the flow field upstream of orifices. In particular, new experimental data for the upstream flow pattern resulting from multiple orifices, an orifice near a free surface, and a large orifice (where the pressure gradient across the orifice cannot be ignored) are collected and presented. A new potential flow solution for flow behind orifices is developed to include pressure gradient effects as well as to accurately superpose the solution due to multiple orifices and determine a solution close to orifices. The proposed solution compares well with the measured data for multiple orifices and for an orifice near a free surface. For a large orifice, the skew in the velocity profile in the vertical direction due to the pressure gradient is accurately predicted.     

转炉余热锅炉辐射室受热面结构设计优化

针对转炉余热锅炉辐射室受热面爆管频繁问题,分析水冷壁结构设计中存在的不足,提出改造方案,对人孔门及手孔门等部位进行优化设计,改造效果良好。     

Self-discrepancy: Comparisons of the psychometric properties of three instruments.

In 2 studies, the psychometric properties of 3 methods for measuring real–ideal and real–ought self-discrepancies were compared: the idiographic Self-Concept Questionnaire–Personal Constructs, the nonidiographic Self-Concept Questionnaire–Conventional Constructs, and the content-free Abstract Measures. In the 1st study, 125 students at a university clinic completed the 3 instruments and measures of anxiety and depression before individual therapy. In the 2nd study, 278 undergraduates completed the 3 instruments at 2 time points 4 weeks apart and completed multiple measures of anxiety and depression at the 2nd time point. Internal consistency alphas were consistently strong for the personal construct measures (.90 to .92) and moderate to strong for the conventional construct measures (.82 to .90). Test–retest reliability coefficients were above .70 for the personal construct and conventional construct measures, but the coefficients for the latter were inflated by the stability of their error terms. The 2 discrepancies were found to be factorially distinct even though they were highly correlated. Convergent and discriminant evidence of validity was found in both studies for all measures except the abstract real–ought discrepancy. Convergence was as strong or stronger for the personal construct measures in comparison to the other measures. Test-criterion evidence of validity, with multiple measures of anxiety and depression as criteria, was found in both studies for all measures except for the abstract real–ought discrepancy in relation to anxiety. Overall, the findings support the idiographic personal construct instrument most strongly for clinical assessment and for clinical, translational, and personality research. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Assessment of Time of Concentration Formulas for Overland Flow

Despite the importance of overland time of concentration on the design discharge, engineers are often bewildered by the array of formulas available in the literature without knowing the accuracy of each formula. This assessment covers nine formulas published between 1946 and 1993, which are intended for overland flow only that is subjected to uniform rain. The assessment compares the estimates from the formulas with experimental values that are derived under the same conditions for two surfaces: concrete and grass. The assessment shows that formulas that do not account for the rainfall intensity are only valid for a limited range of rainfall intensities. The formulas that account for the rainfall intensity generally show better agreement with the experimental data. Finally, the assessment gives two rankings of the formulas for the two surfaces in accordance to their accuracy as compared to the experimental data. The formula that has the best accuracy for both surfaces is the Chen and Wong formula.     

钢管外表面磨光机组主要技术参数的技术

钢管外表面磨光机组可清除钢管外表面的缺陷,还可对钢管进行整体磨光加工,并能清除钢管表面的氧化铁皮。为此设计了一套钢管外表面磨光机组,经合理选用技术参数,实现了钢管外表面的整体修磨,提高了钢管外表面质量。