三氯氢硅歧化反应精馏生产硅烷的模拟简

The reactive distillation process for producing high purity monosilane via trichlorosilane redistribution reaction was simulated. Rigorous RadFrac block was employed in Aspen Plus simulation package. Accurate results could be given when the chemical kinetics was taken into account in the equilibrium stage model. A single column process was used for the verification of previous studies. The results showed that 99.9% purity monosilane could be achieved in the reactive distillation. A pumparound block was employed to reduce the condenser duty with inexpen- sive coolant. The effects of operating pressure, feed stage location, liquid holdup per stage and pumparound loca- tion were also investigated. The energy consumption was limited, but the refrigerant temperature was too low, which is the fatal disadvantage. Therefore, a double columns process was developed to increase the condenser tem- perature. The simulation results demonstrated that a reasonable temperature could be achieved by varying the recy- cle stream location.     

反应精馏合成乙酸丁酯的实验和模拟(英文)

In this paper, a reactive distillation (RD) column was applied for synthesis n-butyl acetate from n-butanol and acetic acid. The Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetic model and an equilibrium stage model for separation were employed to study the RD process. The results obtained from the equilibrium stage model agreed well with the experiments. The effects of operating variables on the n-butanol conversion and n-butyl acetate purity were further investigated. The optimal column configuration for the production of n-butyl acetate was designed with 5 rectifying stages, 8 reaction stages and 13 stripping stages by the simulation study. According to the simulation results, n-butanol conversion and n-butyl acetate purity all reached greater than 96%.     

用于生产TAEE的反应精馏和全蒸发的混合过程

In this study, a reactive distillation column in which chemical reaction and separation occur simultaneously is applied for the synthesis of tert-amyl ethyl ether （TAEE） from ethanol （EtOH） and tert-amyl alcohol （TAA）. Pervaporation, an efficient membrane separation technique, is integrated with the reactive distillation for enhancing the efficiency of TAEE production. A user-defined Fortran subroutine of a pervaporation unit is developed, allowing the design and simulation of the hybrid process of reactive distillation and pervaporation in Aspen Plus simulator. The performance of such a hybrid process is analyzed and the results indicate that the integration of the reactive distillation with the pervaporation increases the conversion of TAA and the purity of TAEE product, compared with the conventional reactive distillation.     

反应精馏过程中的多稳态分析

Reactive distillation processes for synthesis of ethylene glycol （EG） and ethyl tert-butyl ether （ETBE） were modeled with the simulation package ASPEN PLUS. The input multiplicity and output multiplicity were discussed with the method of sensitivity analysis for both cases. In EG production process, steady state multiplicities were studied in terms of effective liquid holdup volume and boil-up ratio. In ETBE synthesis process, the user kinetic subroutine was supplied into ASPEN PLUS firstly, and then the composition, temperature and reaction-rate profiles within the reactive distillation column were presented in detail. A set of stable solution branches based on distinct initial guesses for a range of boil-up ratio were found in EG synthesis. Input multiplicities were observed for a range of reboiler duty at several values of reflux ratio for ETBE synthesis process. These results can be used to avoid excessive energy consumption and achieve optimum design of reactive distillation column.     

基于自适应神经模糊推理系统的间歇反应精馏组分估算(英文)

Composition estimation plays very important role in plant operation and control. Extended Kalman filter (EKF) is one of the most common estimators, which has been used in composition estimation of reactive batch distillation, but its performance is heavily dependent on the thermodynamic modeling of vapor-liquid equilibrium, which is difficult to initialize and tune. In this paper an inferential state estimation scheme based on adaptive neuro-fuzzy inference system (ANFIS), which is a model base estimator, is employed for composition estimation by using temperature measurements in multicomponent reactive batch distillation. The state estimator is supported by data from a complete dynamic model that includes component and energy balance equations accompanied with thermodynamic relations and reaction kinetics. The mathematical model is verified by pilot plant data. The simulation results show that the ANFIS estimator provides reliable and accurate estimation for component concentrations in reactive batch distillation. The estimated states form a basis for improving the performance of reactive batch distillation either through decision making of an operator or through an automatic closed-loop control scheme.     

Optimization of coproduction of ethyl acetate and n-butyl acetate by reactive distillation☆

Based on a previous investigation, a simulation model was used for optimization of coproduction of ethyl acetate and n-butyl acetate by reactive distil ation. An experimental setup was established to verify the simulated results. The effects of various operating variables, such as ethanol feed location, acetic acid feed location, feed stage of reaction mixture of acetic acid and n-butanol, reflux ratio of ethyl acetate reactive distillation column, and distil-late to feed ratio of n-butyl acetate column, on the ethanol/n-butanol conversions, ethyl acetate/n-butyl acetate purity, and energy consumption were investigated. The optimal results in the simulation study are as follows:ethanol feed location, 15th stage;acetic acid feed location, eighth stage;feed location of reaction mixture of acetic acid and n-butanol, eighth stage;reflux ratio of ethyl acetate reactive distillation column, 2.0;and distillate to feed ratio of n-butyl acetate, 0.6.     

催化精馏塔中乙酸甲酯水解的研究

A nonequilibrium stage model was used to simulate countercurrent multicomponent catalytic distillation processes for methyl acetate hydrolysis. Computations of stage eiliciencies or height equivalent to a theoretical plate (HETP) were entirely avoided by this model. The consistency of simulated results and experimental data in conversions and concentration of each component along a column indicates that the model predicts the actual process well. The influences of operating parameters on hydrolytic conversions, such as feed molar ratios, feed locations, feed and reflux rates, heights of reactive and stripping sections, were analyzed adequately by simulating calcuiations. A good operating mode was then obtained, which is helpful to the development of a new process.     

Study on Hydrolysis of Methyl Acetate in a Catalytic Distillation Column

A nonequilibrium stage model was used to simulate countercurrent multicomponent catalytic distillation processes for methyl acetate hydrolysis. Computations of stage efficiencies or height equivalent to a theoretical plate (HETP) were entirely avoided by this model. The consistency of simulated results and experimental data in conversions and concentration of each component along a column indicates that the model predicts the actual process well. The influences of operating parameters on hydrolytic conversions, such as feed molar ratios, feed locations, feed and reflux rates, heights of reactive and stripping sections, were analyzed adequately by simulating calculations. A good operating mode was then obtained, which is helpful to the development of a new process.     

SIMULATION OF DISTILLATION PROCESSES WITH REACTIONS IN SERIES

This paper introduces a mathematical model and advances an algorithm,that can be used for simu-lation of reactive distillation processes.This model takes into account the reactions in series,that occurwithin a distillation column and this algorithm is based upon the block tridiagonal matrix technique.In order to accomplish a computation of design and inspect whether or not different configuration of flowsbetween stages can increase the yields of intermediate products,a procedure for solving block tridiagonalmatrix equation with some off-tridiagonal submatrixes and/or submatrixes on the borders is modified.The saponification of propylene chlorophydrin is illustrated to verify the algorithm.It can be seen thatthe results are satisfactory.     

乳酸提纯反应精馏新工艺非平衡级稳态模拟

Purification of lactic acid by reactive distillation (RD) is a novel technology which has many excellent characteristics compared with traditional technologies. This paper presented a non-equilibrium model for lactic acid purification RD pilot column. An Improved Separation Efficiency Function (ISEF) was proposed based on de-coupling and pseudo-homogenous assumptions, which greatly improved the solving efficiency and made this model suitable for practical application. Simulation results were consistent with the experiments in different conditions, and the simulation results outperformed the simulator ASPEN PLUS in which the equilibrium stage assumptions were adopted. The static characteristics of the pilot setup were also investigated. The analysis result could help to accelerate the commercialization of the lactic acid purification RD technology.     

乳酸提纯新工艺动态建模仿真和控制系统设计

基于非平衡级和拟均相假设,建立了乳酸提纯反应精馏新工艺实验装置的动态机理模型.通过改进的数值计算方法提高了模型的求解效率,设计并实现了包含物性估算系统的模型仿真平台,以促进新工艺的工业化应用.利用仿真平台对新工艺装置进行了动态特性分析,在此基础上设计了两种单端质量控制方案:直接物料平衡和间接物料平衡方案.在不同类型和幅度的过程扰动下,分析比较了两种控制方案的调节性能.结果表明直接物料平衡方案控制品质优于间接物料平衡方案,可在不同扰动情况下满足过程的产品质量和转化率的联合控制要求.非平衡级动态机理模型能够反映反应精馏过程的动态特性,分析发现反应精馏过程有着独特的过程特性,基于机理模型的仿真平台是分析反应精馏特性的有效工具.     

Transesterification of methyl myristate in a continuous reactive distillation column: simulation and experiment

The transesterification of methyl myristate with isopropanol to methanol and isopropyl myristate is presented. This reactive system is suitable for reactive distillation and is used for the investigation carried out in this paper. A simulation model for the steady state and dynamic simulation of the reactive distillation processes was developed. For the validation of this model experiments were carried out. Based on dimensioning calculations, a 6 meter high reactive distillation column (0.1 m i.d.) with 22 bubble cap trays and a total liquid holdup of about 10 litres was constructed and built up. The stationary results obtained from the column show a good comparison between the simulated and the experimental concentration and temperature profiles. The experimentally determined dynamic time constants and sensitivities of the temperature profile of the column could be reproduced very well by the simulation tool developed.     

2,3-丁二醇分离纯化中反应精馏的实验和模拟

对反应萃取-水解精馏法分离发酵液中2,3-丁二醇工艺中的水解精馏进行了实验和模拟研究。实验验证了4,5-二甲基-2-丙基-1,3-二氧戊环(DPD)水解精馏得到2,3-丁二醇的可行性。采用Aspen Plus建立反应精馏模型,以UNIFAC为热力学方程,RadFrac为反应精馏模块,对常压下DPD的水解精馏进行模拟,模拟结果与实验结果吻合较好。以2,3-丁二醇的收率为主要优化目标,考察最佳塔板数、进料位置、进料比、回流比和塔顶馏出比。模拟结果表明,在最佳操作条件下,塔釜2,3-丁二醇的收率为0.981,摩尔分率为0.150。     

伴有平衡反应的分离过程的数学模拟(Ⅰ)板式反应精馏塔的模拟计算

本文提出了相平衡和化学平衡同时存在的多相复杂可逆反应的反应精馏计算方法。模型方程由物料衡算方程,化学平衡方程,相平衡方程,归一方程,焓衡算方程组成。模型分三层迭代求解。该算法可适用于非理想系统、反应动力学未知的快速可逆反应过程。并且对不同操作条件下的计算均能稳定收敛,可以进行操作条件的调优。应用该算法模拟计算未达到平衡的反应过程,可以预测各板上的最大转化率和各板组成。     

Hybrid reactive distillation systems for n-butyl acetate production from dilute acetic acid

The recovery of dilute acetic acid, regarding as a waste stream in many chemical and petrochemical processes, becomes an important issue due to economic and environmental awareness. In this work, a simulation study on the direct utilization of dilute acetic acid to produce n-butyl acetate via esterification with butanol in a reactive distillation is presented by using Aspen Plus. The performance of a hybrid reactive distillation with a pretreatment unit, i.e., a conventional distillation or a pervaporation, is investigated. For a single reactive distillation system, it is found that higher overall energy of the system is required when the concentration of acetic acid is lowered. By considering the enrichment of acetic acid in the reactive distillation column feed from 35 to 65 wt.%, a hybrid pervaporation–reactive distillation requires lower energy than both the conventional distillation–reactive distillation system and the single reactive distillation.     

新松弛法用于流化催化反应精馏过程的计算

作者利用新松弛法求解平衡级模型基本方程组,对流化催化反应精馏合成乙酸乙酯过程进行了模拟,并将模拟结果与实验结果进行对比。通过2个实例表明,该模型易收敛,计算速度较快,计算准确,适用于流化催化反应精馏过程的模拟计算。     

苯氯化反应与精馏过程的模拟与实时监控系统

以反应与精馏集成生产氯化苯过程为研究对象,依据化工机制模型和动态特性,采用化工流程模拟HYSYS软件建立苯氯化反应与精馏集成过程流程模拟系统。采用Visual Basic语言编写通讯模块,实现WINCC集成监控系统和模拟系统数据之间的实时通信。构建了苯氯化反应与精馏集成过程的实时监控平台。实现了模拟过程动态显示、PID控制器参数整定、历史数据查询、报表显示与打印、实时报警等多项集成功能。     

Simulation of continuous packed bed reactive distillation column for the esterification process using activity based kinetic model

A mathematical model for the continuous packed bed reactive distillation process of esterification of acetic acid with methanol is developed. The kinetic rate equation, which plays a major role for the performance of reactive distillation and it is the part of model, is required for the liquid phase reversible esterification reaction. The mineral sulphuric acid is used as the catalyst. The kinetic experiments are carried out under different temperatures in the range of 305.15 to 333.15 K and catalyst concentrations in the range of 0.1267 mole H⁺/lit to 0.6537 mole H⁺/lit. From that experimental data the kinetic model is developed and the same is used for the simulation of reactive distillation process. Equilibrium stage model, in which the vapour and the liquid leaving a stage are assumed to be in equilibrium with each other, has been used for the simulation of reactive distillation process by incorporating our kinetic model. Conversion of acetic acid as function of reflux ratio and reboiler ratio has been predicted. The liquid composition and temperature profiles versus stage number have been also predicted. Finally, the optimum operating conditions obtained from the simulation results for high pure methyl acetate by reactive distillation process.     

Solvent selection for extractive distillation using molecular simulation

This study examines a search for a new solvent for extractive distillation using molecular simulation, and the performance of the proposed extractive distillation processes using the solvents is compared to conventional processes. Unlike other solvent search procedures, the proposed solvent finding technique relies on a chemical structure similarity between the solvent and the extracted material without depending on a solvent database. Two new processes of benzene, toluene, and xylenes separation from naphtha reformate and propene/propane separation are compiled with the newly developed solvents for the performance examination. The simulation of the proposed extractive distillation processes demonstrates a significant performance improvement in energy saving and investment cost over conventional processes.