Strategies for Optimizing Feed Rate of Fed-Batch Yeast Fermentation by Fuzzy-Neural Network

In this paper,a novel fuzzy neural network model,in which an adjustable fuzzy sub-space was designed by uniform design,has been established and used in fed-batch yeast fermentationas an example.A brand-new optimization sub-network with special structure has been built andgenetic algorithm,guaranteeing the optimization in overall space,is introduced for the feed rateoptimization.On the basis of the model network,the optimal substrate concentration and theoptimal amount of fed-batch at different periods have been studied,aided with the optimizationnetwork and the genetic algorithm separately.The above results can be used as a basis for theestablishment of a fuzzy neural network controller.     

基于神经网络与遗传算法结合的硝化细菌发酵培养基优化(英文)

Two artificial intelligence techniques, artificial neural network and genetic algorithm, were applied to optimize the fermentation medium for improving the nitrite oxidization rate of nitrite oxidizing bacteria. Experiments were conducted with the composition of medium components obtained by genetic algorithm, and the experimental data were used to build a BP (back propagation) neural network model. The concentrations of six medium components were used as input vectors, and the nitrite oxidization rate was used as output vector of the model. The BP neural network model was used as the objective function of genetic algorithm to find the optimum medium composition for the maximum nitrite oxidization rate. The maximum nitrite oxidization rate was 0.952 g 2 NO-2-N·(g MLSS)-1·d-1 , obtained at the genetic algorithm optimized concentration of medium components (g·L-1 ): NaCl 0.58, MgSO 4 ·7H 2 O 0.14, FeSO 4 ·7H 2 O 0.141, KH 2 PO 4 0.8485, NaNO 2 2.52, and NaHCO 3 3.613. Validation experiments suggest that the experimental results are consistent with the best result predicted by the model. A scale-up experiment shows that the nitrite degraded completely after 34 h when cultured in the optimum medium, which is 10 h less than that cultured in the initial medium.     

基于神经网络的丙烯腈流化床反应器的离线模拟与优化

A mathematical model is developed for an industrial acrylonitrile fluidized-bed reactor based on artificial neural networks.A new algorithm,which combines the characteristics of both genetic algorithm(GA) and generalized delta-rule(GDR) is used to train artificial neural network (ANN) in order to avoid search terminated at a local optimal solution.For searching the global optimum,a new algorithm called SM-GA,incorporating advantages of both simplex method (SM) and GA, is proposed and applied to optimize the operating conditions of an acrylonitrile fluidized-bed reactor in industry.     

模糊自适应遗传算法及其在化工中的应用

Considering that the performance of a genetic algorithm (GA) is affected by many factors and their rela-tionships are complex and hard to be described,a novel fuzzy-based adaptive genetic algorithm (FAGA) combined a new artificial immune system with fuzzy system theory is proposed due to the fact fuzzy theory can describe high complex problems.In FAGA,immune theory is used to improve the performance of selection operation.And,crossover probability and mutation probability are adjusted dynamically by fuzzy inferences,which are developed according to the heuristic fuzzy relationship between algorithm performances and control parameters.The experi-ments show that FAGA can efficiently overcome shortcomings of GA,i.e.,premature and slow,and obtain better results than two typical fuzzy GAs.Finally,FAGA was used for the parameters estimation of reaction kinetics model and the satisfactory result was obtained.     

基于复合神经网络的离散非线性系统建模与控制

An adaptive inverse controller for nonliear discrete-time system is proposed in this paper. A compound neural network is constructed to identify the nonlinear system, which includes a linear part to approximate the nonlinear system and a recurrent neural network to minimize the difference between the linear model and the real nonlinear system. Because the current control input is not included in the input vector of recurrent neural network (RNN), the inverse control law can be calculated directly. This scheme can be used in real-time nonlinear single-input single-output (SISO) and multi-input multi-output (MIMO) system control with less computation work. Simulation studies have shown that this scheme is simple and affects good control accuracy and robustness.     

Neural network intelligent system for the on -line optimization in chemical plants

A strategy of developing on-line optimization intelligent systems based on combiningflowsheeting simulation and optimization package with artificial neural networks(ANN)is presented inthis paper.A number of optimization cases for a certain chemical plant are obtained off-line byusing PROCESS-Ⅱ or other flowsheeting programming with optimization.Then,taking these cases astraining examples,we establish a neural network systems which can be used on-line as an optimizer toobtain setpoints from input data sampled from distributed control system through gross error detectionand data reconciliation procedures.Such an on-line optimizer possesses two advantages over nonlinearprogramming package:first of all,there is no convergence problem for the trained ANN to be usedonline;secondly,the frequency for setpoints updating is not limited because only algebraic calculationrather than optimization is required to be carried out on-line.Here two key problems ofimplementing ANN approaches to the on-line optimization ar     

利用神经网络预测注塑成型过程熔融温度

Among the processing conditions of injection molding, temperature of the melt entering the mold plays a significant role in determining the quality of molded parts. In our previous research, a neural network was developed to predict the melt temperature in the barrel during the plastication phase. In this paper, a neural network is proposed to predict the melt temperature at the nozzle exit during the injection phase. A typical two-layer neural network with back propagation learning rules is used to model the relationship between input and output in the injection phase. The preliminary results show that the network works well and may be used for on-line optimization and control of injection molding processes.     

基于剪接系统的遗传算法RBF网络建模方法

A splicing system based genetic algorithm is proposed to optimize dynamical radial basis function （RBF） neural network, which is used to extract valuable process information from input output data. The novel RBF network training technique includes the network structure into the set of function centers by compromising between the conflicting requirements of reducing prediction error and simultaneously decreasing model complexity. The effectiveness of the proposed method is illustrated through the development of dynamic models as a benchmark discrete example and a continuous stirred tank reactor by comparing with several different RBF network training methods.     

催化重整过程的多目标优化

In this article, a multiobjective optimization strategy for an industrial naphtha continuous catalytic reforming process that aims to obtain aromatic products is proposed. The process model is based on a 20-lumped kinetics reaction network and has been proved to be quite effective in terms of industrial application. The primary objectives include maximization of yield of the aromatics and minimization of the yield of heavy aromatics. Four reactor inlet temperatures, reaction pressure, and hydrogen-to-oil molar ratio are selected as the decision variables. A genetic algorithm, which is proposed by the authors and named as the neighborhood and archived genetic algorithm （NAGA）, is applied to solve this multiobjective optimization problem. The relations between each decision variable and the two objectives are also proposed and used for choosing a suitable solution from the obtained Pareto set.     

基于Tent混沌优化的神经网络预测控制

With the unique erggdicity, i rregularity, and.special ability to avoid being trapped in local optima, chaos optimization has been a novel global optimization technique and has attracted considerable attention for application in various fields, such as nonlinear programming problems. In this article, a novel neural network nonlinear predic-tive control （NNPC） strategy baseed on the new Tent-map chaos optimization algorithm （TCOA） is presented. Thefeedforward neural network＇is used as the multi-step predictive model. In addition, the TCOA is applied to perform the nonlinear rolling optimization to enhance the convergence and accuracy in the NNPC. Simulation on a labora-tory-scale liquid-level system is given to illustrate the effectiveness of the proposed method.     

热偶精馏过程模拟优化方法的改进——人工神经网络-遗传算法

采用人工神经网络和遗传算法对热偶精馏分离过程提出了一种新的建模方法和优化算法,该方法不仅能够有效地求解热偶精馏过程的数学模型,迅速地得到优化变量和目标函数的解,而且具有获得全局最优解的能力.最后通过实例说明了本方法的有效性.     

基于混合遗传算法的人工神经网络模型及其对有机化合物熔点的预测

为了避免BP神经网络在训练过程中收敛于局部极小的缺陷,采用自适应交叉变异、最优保存的混合遗传算法对BP网络的权值和阈值进行优化,从而提出一种新的基于混合遗传算法的神经网络模型.该算法首先对一给定的网络结构,采用混合自适应交叉变异和最优保存策略,取各自的长处,用尽可能少的搜索代数找到问题的最优解,从而既防止算法陷入局部最优,又保证算法有较好的平均适应值和最佳的适应值个体.采用上述优化策略的人工神经网络可明显改善收敛的稳定性和收敛速度,并确保网络收敛于全局极小点.人工神经网络运用于物性数据的预测是一个具有潜力和有待开发的领域.运用该模型,根据有机化合物的分子量、临界密度、正常沸点和偶极矩,对其熔点进行预测.预测结果表明：提出的混合遗传算法神经网络优于其他算法神经网络,而且预测结果优于文献上已有的Joback方程和许氏方程的计算值.     

基于神经网络和遗传算法的薄壳件注塑成型工艺参数优化

建立了基于神经网络和遗传算法并结合正交试验的薄壳件注塑成型工艺参数优化系统。正交试验法用来设计神经网络的训练样本，人工神经网络有效的创建了翘曲预测模型；遗传算法完成了对影响薄壳塑件翘曲变形的工艺参数（模具温度、注射温度、注射压力、保压时间、保压压力和冷却时间等）的优化，并计算出了它们的优化值。按该参数进行试验，效果良好，可以有效地减小薄壳塑件翘曲变形，其试验数值与计算数值基本相符，说明所提出的方法是可行的。     

一种改进的混合遗传算法人工神经网络及其应用

采用自适应交叉变异、最优保存、局部寻优的遗传算法,避免了BP神经网络在训练过程中收敛于局部极小点的缺陷,并将其对神经网络的权值和阈值进行优化,从而提出了一种改进的混合遗传算法神经网络模型。该算法首先对一给定的神经网络结构,采用自适应交叉变异和最优保存策略对神经网络进行优化;然后采用局部寻优策略进一步克服神经网络学习算法的早熟问题。采用上述三种优化策略的神经网络模型对三元混合物溶液的物性和烟叶质量进行预测。试算结果表明,与实验值相比,预测结果良好。     

航空发动机磨损趋势预测模型研究

文章讨论了神经网络的BP算法和遗传算法,提出用遗传算法来优化BP神经网络,应用遗传算法训练神经网络权重,实现网络结构的优化,用优化后的BP人工神经网络建立了航空发动机磨损故障趋势预测模型,利用发动机的光谱监测数据作为预测磨损趋势的特征参数,进行了模型的训练和预测试验,并将该模型预测结果与BP算法和多元线性回归法的预测结果进行了比较,证明了基于遗传算法的人工神经网络是航空发动机磨损故障趋势预测的一种理想方法。     

基于神经网络和遗传算法的塑料热压成型多目标优化

论述了人工神经网络和遗传算法在塑料热压成型工艺优化中的应用,首先利用人工神经网络建立热压成型工艺参数与零件性能之间关系的数学模型,然后用遗传算法对工艺参数优化。根据多目标函数优化问题的单目标化思想,对优化后的单目标进行分解,得到最优工艺参数条件下的塑料热压产品性能,从而为建立和控制塑料热压成型工艺参数提供了一种行之有效的方法。     

分离系统与换热网络同步优化方法的改进：神经元网络—遗传算法

采用神经元网络法和遗传算法，在过程系统用能一致性的基础上对分离系统与换热网络同步优化问题提出了改进的优化模型及优化策略。该方法不仅能够自动、迅速地同步得到分离序列与换热网络联合系统的流程结构与操作参数，而且具有获得全局最优解的能力。最后通过实例说明本方法的有效性。     

Performance evaluation of an ANN–GA aided experimental modeling and optimization procedure for enhanced synthesis of marine biosurfactant in a stirred tank reactor

BACKGROUND: An improved resilient back‐propagation neural network modeling coupled with genetic algorithm aided optimization technique was employed for optimizing the process variables to maximize lipopeptide biosurfactant production by marine Bacillus circulans. RESULTS: An artificial neural network (ANN) was used to develop a non‐linear model based on a 2⁴ full factorial central composite design involving four independent parameters, agitation, aeration, temperature and pH with biosurfactant concentration as the process output. The polynomial model was optimized to maximize lipopeptide biosurfactants concentration using a genetic algorithm (GA). The ranges and levels of these critical process parameters were determined through single‐factor‐at‐a‐time experimental strategy. Improved ANN‐GA modeling and optimization were performed using MATLAB v.7.6 and the experimental design was obtained using Design Expert v.7.0. The ANN model was developed using the advanced neural network architecture called resilient back‐propagation algorithm. CONCLUSION: Process optimization for maximum production of marine microbial surfactant involving ANN‐GA aided experimental modeling and optimization was successfully carried out as the predicted optimal conditions were well validated by performing actual fermentation experiments. Approximately 52% enhancement in biosurfactant concentration was achieved using the above‐mentioned optimization strategy. © 2012 Society of Chemical Industry     

基于神经网络和遗传算法的注射成型工艺优化

论述人工神经网络和遗传算法在塑料注射成型工艺优化中的应用,首先利用人工神经网络建立注射成型工艺参数与塑件翘曲量之间关系的数学模型,然后用遗传算法对工艺参数优化.其中由正交法设计得到实验样本,由数值模拟软件计算得到塑件翘曲量,将其作为优化目标.按优化后的工艺参数进行实验,获得较高质量的塑料制品,从而为建立和控制注射模工艺参数提供一种行之有效的途径.