共查询到20条相似文献,搜索用时 140 毫秒
1.
以煤为原料合成醋酸乙烯具有成本低的优点,二醋酸亚乙酯(EDA)是合成醋酸乙烯的中间产物.在机械搅拌反应釜中,采用三碘化铑为主催化剂,碘化锂和碘甲烷为助催化剂,以二甲醚、CO和H2为原料合成二醋酸亚乙酯,考察了反应温度、二甲醚量、CO分压和H2分压对反应的影响,在反应温度180℃、CO分压2.2 MPa、H2分压2.2 MPa和二甲醚量0.05 mol的条件下反应8h,二甲醚转化率为60.00%,醋酸甲酯选择性为31.43%,二醋酸亚乙酯选择性为68.56%.研究结果表明,反应温度和原料配比对二甲醚转化率和EDA选择性影响较大,根据实验现象,研究了二甲醚与合成气制取二醋酸亚乙酯的反应机理. 相似文献
2.
羰基合成醋酸是醋酸生产的主要方法,而羰基合成过程中CO的成本直接影响着醋酸生产成本。对以煤和焦炭为原料生产CO的工艺、能耗、物耗进行了分析,分别建立了原料与成本之间的数学模型,计算出不同煤价和焦炭价格下的CO成本。通过对比CO成本,得出了在目前价格形势下,以煤为原料生产CO成本低于以焦炭为原料生产CO。 相似文献
3.
介绍了大型甲醇和醋酸联合装置的关键生产技术,研究证明,采用大型壳牌煤气化装置以高浓度CO的粗煤气为原料制备甲醇和醋酸,通过选择合适的CO变换率、用CO2替代N2作为煤粉输送气和反吹气、低温甲醇洗配套冷箱技术、提纯CO作为醋酸的原料气等技术,达到联合装置节能、减排、增产、减少设备投资等目的。 相似文献
4.
在以煤为原料制取甲醇联产醋酸,在用甲醇和一氧化碳低压羰基法合醋酸中,一氧化碳提纯是该工艺的关键工序,采用CO膜分离技术替代传统的CO深冷分离技术在醋酸工业中的应用。文章主要从CO膜分离技术特点、工艺流程、相关工序的介绍,以及CO膜分离和深冷分离关键工艺指标的对比得出结论,CO膜分离技术完全可以满足合成醋酸的要求,取得了良好的济效益和社会效益。 相似文献
6.
7.
李好管 《化学工业与工程技术》2001,22(2):10-13
分析了醋酸的生产概况 ;综述了醋酸工艺的进展 ;介绍了具有工业化前景或学术价值的醋酸合成新工艺的研究开发情况 ;对我国醋酸工业的发展提出了建议。 相似文献
8.
9.
10.
前言
醋酸尾气中含有60v%~85v%的CO,以一套年产200kt/a的羰基合成醋酸装置计,每小时产生1500~2000Nm3高压尾气,其中CO量占合成醋酸原料气CO量的15v%多。采用一种有效、合理的方法回收醋酸尾气中CO既可降低醋酸的生产成本,又可减少污染气体的排放量。 相似文献
11.
12.
13.
在分析总结了甲烷的临氧活化以及近年来国内外CH4-CO2直接转化合成乙酸研究成果的基础上,提出了在CH4-CO2体系中引入O2直接合成乙酸的新方法,并从反应热力学及反应机理方面进行了可行性分析。 相似文献
14.
Coproduction of acetic acid and hydrogen/power from natural gas with zero carbon dioxide emissions 下载免费PDF全文
Ibubeleye Somiari Vasilios Manousiouthakis 《American Institute of Chemical Engineers》2018,64(3):860-876
A process plant flow sheet that coproduces acetic acid and hydrogen/power from natural gas with zero carbon dioxide emissions is developed. Two cases are explored: the production of acetic acid and hydrogen (Case 1) and the production of acetic acid and power (Case 2). This is realized by the selection of an appropriate reaction cluster whose sum results in the overall reaction that coproduces acetic acid and hydrogen/power. The concept of energetic self‐sufficiency is introduced and it imposes constraints on the system defined in terms of the ratio of oxygen feed to acetic acid produced. Heat and power integration of the converged flow sheet reveals an operating range for each case that guarantees energetic self‐sufficiency. Operating points are chosen to conduct a preliminary economic analysis and a carbon dioxide cost and performance metric calculation to quantify profitability and carbon capture potential of the overall process. © 2017 American Institute of Chemical Engineers AIChE J, 64: 860–876, 2018 相似文献
15.
16.
17.
Walt Partenheimer 《Advanced Synthesis \u0026amp; Catalysis》2004,346(12):1495-1500
DMtoluene (3,4‐dimethoxytoluene; DM=3,4‐dimethoxy), a model compound for lignin oxidation, can be autoxidized in acetic acid using a Co/Mn/Br catalyst to its benzaldehyde in 51 mol % yield, and to its acid in 85–92 mol % yield. This synthesis is unusual because a number of unprecedented phenomena occur. 1) The rate of molecular oxygen reacting with the substrate is bi‐phasic, i.e., two maximum in the rate of reaction are observed. 2) In the first phase, all of the 3,4‐dimethoxytoluene is converted to intermediates, but very little to the carboxylic acid. 3) During the second maximum of activity, virtually all the intermediates are converted to the carboxylic acid with 95–100% mass accountability. 4) The rate of carbon monoxide and carbon dioxide formation is considerably higher during the second phase during which 5) 9–12% of methyl 3,4‐dimethoxybenzoate (the methyl ester of the benzoic acid) is formed. Mechanisms are suggested for these unusual phenomena. 相似文献
18.
19.
20.
醋酸甲酯羰基合成醋酐是当今世界上生产醋酐的最先进技术。我国自2003年起先后建设了八套羰基合成醋酐装置,但是系统产生焦油量较大。反应系统焦油是原料中杂质和配比不当,副反应多所致;分离系统焦油是温度高,缺少必要保护措施,醋酸、醋酐分解,引起副反应所致。 相似文献