共查询到20条相似文献,搜索用时 46 毫秒
1.
一、太阳与太阳能 众所周知,在浩翰的宇宙中有一颗离我们最近的恒星--太阳.现代科学表明太阳距离我们相当遥远,达到1.5亿km,虽然太阳光的传播速度为30万km/s,但我们在地球上所见到的光线已经是8min之前从太阳发出的光线了.太阳的直径为139万km,而地球直径仅为1.27万km,太阳的直径约为地球直径的109倍,其体积则比地球大130多万倍.尽管如此,由于距离遥远,太阳张角仅仅为32′. 相似文献
2.
太阳能干燥系列讲座(1)太阳能干燥——太阳能热利用中不可忽视的领域 总被引:1,自引:0,他引:1
一物料干燥的能耗与环境污染 干燥作业涉及国民经济的广泛领域,是许多行业不可缺少的工序.在粮食、食品、果品、药材、木材、皮革、橡胶和陶瓷等许多产品的加工处理过程中,干燥作业对产品的质量和成本影响很大. 相似文献
3.
燃料电池技术的发展现状 总被引:4,自引:0,他引:4
燃料电池是不经燃烧过程直接把燃料的化学能转化为电能的装置,具有能量转换效率高、污染物排放量少的独特优点.简述燃料电池工作原理,比较各类燃料电池的特性,并介绍目前燃料电池在国内外的应用现状,同时指出目前影响燃料电池商品化的主要因素. 相似文献
4.
水资源对我国工业发展的影响及对策建议 总被引:2,自引:0,他引:2
党的十六大提出了全面建设小康社会的奋斗目标,十六届三中全会又强调指出,要树立全面、协调、可持续的发展观,促进经济社会和人的全面发展.树立和贯彻科学的发展观,很重要的一个方面,就是要坚持人与自然的和谐,正确处理发展与资源、环境的关系.水是人类的生命线,因此,水不仅是重要的自然资源,而且是战略资源. 相似文献
5.
基于CFD技术的迷宫式油气分离器优化设计 总被引:1,自引:0,他引:1
应用计算流体动力学软件FLUENT对汽车发动机气门室罩内的迷宫式油气分离器进行三维两相流场和油滴颗粒分离效率的数值模拟.通过计算四种分离器结构参数(出口位置、出口直径、V型槽间距和V型槽宽度)下的分离器的分离效率和压降损失,分析了各参数对分离效率的影响,得到分离器性能的规律性结论和分离器的最佳结构参数,用于指导迷宫式油气分离器的设计. 相似文献
6.
7.
8.
一、生物质能概述 生物质能是人类使用的最古老的能源.随着世界经济持续快速地发展和人口数量迅速地增长,人类对能源的需求必然不断地增加,然而目前人类赖以生存的化石能源却正在迅速地减少.据预测,地球上蕴藏的可以开发利用的煤和石油化石能源将分别在200年、40年内耗竭,而天然气也只能用60年左右. 相似文献
9.
光合光量子传感器校准的一些问题 总被引:1,自引:0,他引:1
介绍了光合光量子传感器的校准方法,只要有符合国家标准的辐照度标准灯,并用标准灯对适当级别的光谱辐射计进行校准后,就可在日光下供此类仪器定期校准之用.并证明了所介绍方法的实际可行性.由于LI-COR公司随LI-190型仪器发放的使用说明书中有关量子传感器的光谱响应曲线图前后不相一致,且未加说明,文中对此进行了重点论证和讨论.当前并不存在真正意义上的光量子传感器,实际所用的也只有能量传感器,以光量子单位表示的测量结果是经公式计算得出的.此外,还证明了量子单位测量结果与能量单位测量结果关系的一致性,如有需要,在校准时就可同时得出量子的和能量的两种灵敏度,从而免除了由于单位互换带来的误差. 相似文献
10.
在分析传统实体化视图连接算法的基础上,对EVM算法进行了改进,提出了分布连接算法,加入了选择性批处理思想并在限定时间内实现当DB中源数据发生变化时实体化视图得到相应的更新,确保DW能及时反映DB的现状及OLAP查询的一致性,达到对DW联机维护的目的. 相似文献
11.
Woody biomass in Finland and Sweden comprises mainly four wood species: spruce, pine, birch and aspen. To study the ash, which may cause problems for the combustion device, one tree of each species were cut down and prepared for comparisons with fuel samples. Well-defined samples of wood, bark and foliage were analyzed on 11 ash-forming elements: Si, Al, Fe, Ca, Mg, Mn, Na, K, P, S and Cl. The ash content in the wood tissues (0.2–0.7%) was low compared to the ash content in the bark tissues (1.9–6.4%) and the foliage (2.4–7.7%). The woods’ content of ash-forming elements was consequently low; the highest contents were of Ca (410–1340 ppm) and K (200–1310), followed by Mg (70–290), Mn (15–240) and P (0–350). Present in the wood was also Si (50–190), S (50–200) and Cl (30–110). The bark tissues showed much higher element contents; Ca (4800–19,100 ppm) and K (1600–6400) were the dominating elements, followed by Mg (210–2400), P (210–1200), Mn (110–1100) and S (310–750), but the Cl contents (40–330) were only moderately higher in the bark than in the wood. The young foliage (shoots and deciduous leaves) had the highest K (7100–25,000 ppm), P (1600–5300) and S (1100–2600) contents of all tissues, while the shoots of spruce had the highest Cl contents (820–1360) and its needles the highest Si content (5000–11,300). This paper presented a new approach in fuel characterization: the method excludes the presence of impurities, and focus on different categories of plant tissues. This made it possible to discuss the contents of ash element in a wide spectrum of fuel-types, which are of large importance for the energy production in Finland and Sweden. 相似文献
12.
《热能动力工程》2014,(5)
正1 ABSTRACT To reduce the effect of global warming on our climate,the levels of CO2emissions should be reduced.One way to do this is to increase the efficiency of electricity production from fossil fuels.This will in turn reduce the amount of CO2emissions for a given power output.Using US practice for efficiency calculations,then a move from a typical US plant running at 37%efficiency to a 760℃/38.5 MPa(1 400/5 580 psi)plant running at 48%efficiency would reduce CO2emissions by 170kg/MW.hr or 25%. 相似文献
13.
The purpose of this paper is to illustrate the advantages of the direct surface-curvature distribution blade-design method, originally proposed by Korakianitis, for the leading-edge design of turbine blades, and by extension for other types of airfoil shapes. The leading edge shape is critical in the blade design process, and it is quite difficult to completely control with inverse, semi-inverse or other direct-design methods. The blade-design method is briefly reviewed, and then the effort is concentrated on smoothly blending the leading edge shape (circle or ellipse, etc.) with the main part of the blade surface, in a manner that avoids leading-edge flow-disturbance and flow-separation regions. Specifically in the leading edge region we return to the second-order (parabolic) construction line coupled with a revised smoothing equation between the leading-edge shape and the main part of the blade. The Hodson–Dominy blade has been used as an example to show the ability of this blade-design method to remove leading-edge separation bubbles in gas turbine blades and other airfoil shapes that have very sharp changes in curvature near the leading edge. An additional gas turbine blade example has been used to illustrate the ability of this method to design leading edge shapes that avoid leading-edge separation bubbles at off-design conditions. This gas turbine blade example has inlet flow angle 0°, outlet flow angle −64.3°, and tangential lift coefficient 1.045, in a region of parameters where the leading edge shape is critical for the overall blade performance. Computed results at incidences of −10°, −5°, +5°, +10° are used to illustrate the complete removal of leading edge flow-disturbance regions, thus minimizing the possibility of leading-edge separation bubbles, while concurrently minimizing the stagnation pressure drop from inlet to outlet. These results using two difficult example cases of leading edge geometries illustrate the superiority and utility of this blade-design method when compared with other direct or inverse blade-design methods. 相似文献
14.
A chemical reactor for the steam-gasification of carbonaceous particles (e.g. coal, coke) is considered for using concentrated solar radiation as the energy source of high-temperature process heat. A two-phase reactor model that couples radiative, convective, and conductive heat transfer to the chemical kinetics is applied to optimize the reactor geometrical configuration and operational parameters (feedstock's initial particle size, feeding rates, and solar power input) for maximum reaction extent and solar-to-chemical energy conversion efficiency of a 5 kW prototype reactor and its scale-up to 300 kW. For the 300 kW reactor, complete reaction extent is predicted for an initial feedstock particle size up to 35 μm at residence times of less than 10 s and peak temperatures of 1818 K, yielding high-quality syngas with a calorific content that has been solar-upgraded by 19% over that of the petcoke gasified. 相似文献
15.
16.
17.
18.
The physical aspects of the activation energy, in higher and high temperatures, of the metal creep process were examined. The research results of creep-rupture in a uniaxial stress state and the criterion of creep-rupture in biaxial stress states, at two temperatures, are then presented. For these studies creep-rupture, taking case iron as an example the energy and pseudoenergy activation was determined. For complex stress states the criterion of creep-rupture was taken to be Sdobyrev's, i.e. σred = σ1 β + (1 − β)σi, where: σ1-maximal principal stress, σi-stress intensity, β-material constant (at variable temperature β = β(T)). The methods of assessment of the material ageing grade are given in percentages of ageing of new material in the following mechanical properties: 1) creep strength in uniaxial stress state, 2) activation energy in uniaxial stress state, 3) criterion creep strength in complex stress states, 4) activation pseudoenergy in complex stress states. The methods 1) and 3) are the relatively simplest because they result from experimental investigations only at nominal temperature of the structure work, however, for methods 2) and 4) it is necessary to perform the experimental investigations at least at two temperatures. 相似文献
19.
Jaime Massanet-Nicolau Alan Guwy Richard Dinsdale Giuliano Premier Sandra Esteves 《International Journal of Hydrogen Energy》2010
Hydrogen was produced from primary sewage biosolids via mesophilic anaerobic fermentation in a continuously fed bioreactor. Prior to fermentation the sewage biosolids were heated to 70 °C for 1 h to inactivate methanogens and during fermentation a cellulose degrading enzyme was added to improve substrate availability. Hydraulic retention times (HRT) of 18, 24, 36 and 48 h were evaluated for the duration of hydrogen production. Without sparging a hydraulic retention time of 24 h resulted in the longest period of hydrogen production (3 days), during which a hydrogen yield of 21.9 L H2 kg−1 VS added to the bioreactor was achieved. Methods of preventing the decline of hydrogen production during continuous fermentation were evaluated. Of the techniques evaluated using nitrogen gas to sparge the bioreactor contents proved to be more effective than flushing just the headspace of the bioreactor. Sparging at 0.06 L L min−1 successfully prevented a decline in hydrogen production and resulted in a yield of 27.0 L H2 kg−1 VS added, over a period of greater than 12 days or 12 HRT. The use of sparging also delayed the build up of acetic acid in the bioreactor, suggesting that it serves to inhibit homoacetogenesis and thus maintain hydrogen production. 相似文献
20.
As part of a pilot study investigating the role of microorganisms in the immobilisation of As, Sb, B, Tl and Hg, the inorganic geochemistry of seven different active sinter deposits and their contact fluids were characterised. A comprehensive series of sequential extractions for a suite of trace elements was carried out on siliceous sinter and a mixed silica-carbonate sinter. The extractions showed whether metals were loosely exchangeable or bound to carbonate, oxide, organic or crystalline fractions. Hyperthermophilic microbial communities associated with sinters deposited from high temperature (92–94°C) fluids at a variety of geothermal sources were investigated using SEM. The rapidity and style of silicification of the hyperthermophiles can be correlated with the dissolved silica content of the fluid. Although high concentrations of Hg and Tl were found associated with the organic fraction of the sinters, there was no evidence to suggest that any of the heavy metals were associated preferentially with the hyperthermophiles at the high temperature (92–94°C) ends of the terrestrial thermal spring ecosystems studied. 相似文献