Compositional range and electrical properties of the morphotropic phase boundary in the Na0.5Bi0.5TiO3–K0.5Bi0.5TiO3 system

We have investigated the Na_0.5Bi_0.5TiO₃–K_0.5Bi_0.5TiO₃ (NBT–KBT) system, with its complex perovskite structure, as a promising material for piezoelectric applications. The NBT–KBT samples were synthesized using a solid-state reaction method and characterized with XRD and SEM. Room-temperature XRD showed a gradual change in the crystal structure from tetragonal in the KBT to rhombohedral in the NBT, with the presence of an intermediate morphotropic region in the samples with a compositional fraction x between 0.17 and 0.25. The fitted perovskite lattice parameters confirmed an increase in the size of the crystal lattice from NBT towards KBT, which coincides with an increase in the ionic radii. Electrical measurements on the samples showed that the maximum values of the dielectric constant, the remanent polarization and the piezoelectric coefficient are reached at the morphotropic phase boundary (MPB) (? = 1140 at 1 MHz; P_r = 40 μC/cm²; d₃₃ = 134 pC/N).     

Growth and electrical properties of Na0.5Bi0.5TiO3–K0.5Bi0.5TiO3 lead-free single crystals by the TSSG method

A series of NBT-KBT lead-free crystals with dimensions of Φ 35×10 mm were successfully grown by the TSSG method. The as-grown crystals possess rhombohedral perovskite structure at room temperature. The curves ε(T) for all crystals show two abnormal dielectric peaks. The depolarization temperatures T_d derived from the first peak of curves tan δ(T) vary with the KBT content, which are 130, 150, 140, and 115 °C respectively, for (100−x)NBT−xKBT (x=5, 8, 12, 15) crystals, being well consistent with the T_d obtained from the temperature dependence of k_t. A notable thermal hysteresis, ΔT≈35 °C, for ferroelectric-antiferroelectric phase transition was also disclosed for 92NBT-8KBT crystal. The investigation of orientation dependence for electrical properties disclosed the dielectric parameters show weak anisotropy. The piezoelectric constants (d₃₃) are 147, 175, 205, 238 pC/N and the values of k_t are 38%, 52%, 52%, 54%, respectively for (100−x)NBT−xKBT (x=5, 8, 12, 15) crystals.     

Microstructural,magnetic and electric properties of sol-gel synthesized Na0.5Bi0.5TiO3–CoFe2O4 composites

In this work, we presented investigations on the microstructural, magnetic, dielectric and conductive properties of (1-x)Na_0.5Bi_0.5TiO₃-xCoFe₂O₄ (NBT-CFO) composite ceramics (x = 0.1, 0.2, 0.3 and 0.5). The composites were synthesized using the in-situ sol-gel method, and the resulting CFO/NBT embedded structure was observed in the 0.9NBT–0.1CFO sample. Rietveld refinement confirmed that the embedded structure had remarkable effects on the c/a ratios of NBT-CFO composites. Increasing normalization saturation magnetizations were observed with increasing of CFO contents, thus revealing the influence of phase interfaces on magnetism. Dielectric relaxation anomalies were observed on both temperature dependent permittivity and loss spectra. Two sets of anomalies in these spectra were caused by space charges on the phase interfaces of embedded CFO grains and the NBT matrix. The conduction behavior of ceramics with and without the embedded structure obeyed the double power law and Jonscher's fraction power law, respectively, which inferred a transformation from the AC to the DC conduction mechanism with the disappearance of the embedded structure.     

Phase stability and equilibria in the La2O3–TiO2 system

XRD, electron probe wavelength and energy dispersive X-ray analyses were used to reexamine the phase relations in the La₂O₃–TiO₂ system. The diagram was redrawn to include the compound La₄Ti₃O₁₂ in addition to La₄Ti₉O₂₄, La₂Ti₂O₇ and La₂TiO₅. Above 1455°C a cation deficient perovskite La_2/3TiO₃ is stabilized by a small number of Ti³⁺ ions and remains stable on cooling in air. The proposed diagram represents a section through the system at the normal oxygen pressure in air at 1 atm, compositions being expressed in terms of the oxide components stable at room temperature.     

Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3系无铅压电陶瓷的制备工艺研究

利用XRD、SEM等分析技术 ,研究了Na0 .5Bi0 .5TiO3 -K0 .5Bi0 .5TiO3 系无铅压电陶瓷的合成温度 ,烧成工艺条件对陶瓷晶体结构、压电性能的影响。结果表明 ,合成温度提高有利于主晶相的形成 ,适当延长保温时间有利于材料的压电性能。该体系随着KBT含量的增加 ,烧结温度提高 ,烧结温度范围变窄。同时研究了极化工艺条件对材料压电性能的影响表明 ,提高极化电场和适当提高极化温度有利于压电性能的提高 ,但过高的温度由于受到材料高温下退极化的影响而导致材料压电性能变差     

Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3系无铅压电陶瓷的极化工艺研究

主要研究了极化电场,极化时间和极化温度等工艺参数对Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3系无铅压电陶瓷介电和压电性能的影响。结果表明:极化电场和极化温度对压电陶瓷的介电、压电性能影响较大,而极化时间则影响较小。适宜的极化电场是3～3.5kV/mm,极化温度70～80℃,极化时间为10～15min。     

Na0.5Bi0.5TiO3-Ba0.5Sr0.5Nb2O6无铅压电陶瓷的研究

采用固相法制备了(1-x)(Na0.5Bi0.5)TiO3-xBa0.5Sr0.5Nb2O6(0≤x≤1.0％)(简称(1-x)NBT-xBSN)无铅压电陶瓷,研究了不同BSN含量(x=0,0.1％,0.3％,0.5％,0.7％,1.0％,摩尔分数)样品的物相组成、显微结构及电性能.结果表明:所有样品均为纯钙钛矿结构,随掺杂量x的增加,陶瓷的相对密度pr、压电常数d33和机电耦合系数kp均先增大后降低,机械品质因子Qm和退极化温度Td则逐渐下降.该体系陶瓷具有弥散相变特征,弥散指数介于1.6～1.7.当x=0.5％时,陶瓷获得最佳性能:d33=92pC/N,kp=0.164,Qm=89,εr=650,tanδ=5.47％,pr=96.5％.     

Large strains accompanying field-induced ergodic phase-polar ordered phase transformations in Bi(Mg0.5Ti0.5)O3–PbTiO3–(Bi0.5Na0.5)TiO3 ternary system

A composition-induced pseudocubic–tetragonal structural transition was found to be accompanied by a relaxor phase transformation in xBi(Mg_0.5Ti_0.5)O₃–(0.75 − x)PbTiO₃–0.25(Bi_0.5Na_0.5)TiO₃ ternary solid solutions. Dielectric and ferroelectric measurements suggest the coexistence of ergodic and nonergodic relaxor phases within a single pseudocubic phase zone for samples with 0.50 < x < 0.51 where large electromechanical strains of up to 0.43% (S_max/E_max = 621 pm/V) can be generated. The mechanism was mainly ascribed to the accumulated effects of field-modulated continuous and reversible transformations from a pseudocubic ergodic phase to a rhombohedral short-range ordered phase (but not nonergodic polar phase), and finally to a long-range ordered ferroelectric tetragonal phase. These procedures were found to be strongly dependent on the applied field magnitudes. These findings were reasonably approved by a couple of measurements such as dielectric–temperature–frequency spectrum, ferroelectric polarization/strain hysteresis loops, polarization current density curves and particularly ex situ Raman spectrum and in situ high-resolution synchrotron X-ray diffraction.     

Structure,dielectric and ferroelectric properties of 0.92Na0.5Bi0.5TiO3–0.06BaTiO3–0.02K0.5Na0.5NbO3 lead-free ceramics: Effect of Co2O3 additive

0.92Na_0.5Bi_0.5TiO₃–0.06BaTiO₃–0.02K_0.5Na_0.5NbO₃+x wt% Co₂O₃ (NBKT–xCo, x=0, 0.2, 0.4, 0.6, 0.8) lead-free ferroelectric ceramics were prepared via a conventional solid state reaction method. Effects of Co₂O₃ additive on crystallite structure, microstructure, dielectric and ferroelectric properties of the NBKT–xCo ceramics were studied. X-ray diffraction results showed that the rhombohedral–tetragonal morphotropic phase boundary existed in all the ceramics, with relative amount of tetragonal phase varying with the content of Co₂O₃. Average grain size, maximum value of dielectric constant, Curie temperature and ferroelectric properties of the ceramics were close related to the content of Co₂O₃. The dielectric anomaly caused by the phase transition between the ferroelectric phase and the so-called “intermediate phase” was observed in the ceramics with x≤0.2, while it disappeared with further increasing x. All the ceramics showed a diffuse phase transition between the “intermediate phase” and the paraelectric phase. The change in the ferroelectric properties with changing the content of Co₂O₃ was discussed by considering the competitive effects among grain size, relative amount of the tetragonal phase and oxygen vacancies.     

Experimental determination of the liquidus line in the high Bi2O3 region in the TiO2–Bi2O3 system

Liquidus line in the high-Bi₂O₃-containing region of the TiO₂–Bi₂O₃ system was determined experimentally. The equilibrating and quenching technique with subsequent electron probe microanalyser (SEM-EDS) microanalysis were employed. Based on the data, liquidus line was constructed between 60 and 92 mol% Bi₂O₃. The current results showed a higher solubility of Bi₂O₃ in the liquid phase in equilibrium with the Bi₄Ti₃O₁₂ compound compared with the existing phase diagram. In addition, differential scanning calorimetry (DSC) was used to estimate the transformations covering the composition range from 60 to 95 mol% Bi₂O₃. Further, the phase diagram of the TiO₂–Bi₂O₃ system was calculated using a quasichemical model for the liquid phase. The thermodynamic properties of the intermediate compounds were estimated from the data of TiO₂ and Bi₂O₃ pure solids.     

High-temperature solid-state reactions in the (1-x)Na0.5Bi0.5TiO3–xSrTiO3 system

High-temperature reactions during the solid-state synthesis of samples from the (1-x)Na_0.5Bi_0.5TiO₃–xSrTiO₃ system were investigated. Due to the number of chemically different elements, the processing of these ceramics is delicate and requires several firing steps under specific conditions to obtain phase-pure samples. Sintering in an air atmosphere resulted in a macroscopically inhomogeneous microstructure, which is a consequence of incomplete reaction between different secondary phases. However, prolongation of the sintering time aggregated the pores in the sample, while at a higher firing temperature the sample’s secondary phase melted. As a result, the nominal composition was altered, leading to the formation of the Na₂Ti₆O₁₃ secondary phase. Sintering under an increased oxygen pressure of 1 MPa limited the evaporation of the secondary phase. This allowed the completion of the reaction, forming a homogeneous and dense sample. The study provides a set of experimental conditions for the successful preparation of ceramics from the investigated system.     

Relationship of structural phase transformations and properties of sol-gel films in the Bi2O3 — TiO2 — Fe2O3 system

It is shown that the structure and properties of gel-sol oxide films depend on the total mass content of film-forming oxides in the solution and are determined by the different degrees of nonequilibrium of the physicochemical processes. The existence of quite clear relationships between the solution viscosity, the specifics of the microstructure, and certain properties of the film is established. Translated from Steklo i Keramika, No. 4, pp. 11 – 14, April, 2000.     

Enhanced energy storage properties of BiAlO3 modified Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3 lead-free antiferroelectric ceramics

Lead-free (1−x)(0.75Bi_0.5Na_0.5TiO₃–0.25Bi_0.5K_0.5TiO₃)–xBiAlO₃ (BNT–BKT–100xBA, x=0–0.10) ceramics were prepared by two-step sintering method and their phase structure, micro morphology and electrical properties were systematically investigated. X-ray diffraction analysis indicates a pure perovskite phase for x≤0.06 as well as a structural evolution from a tetragonal toward a pseudocubic phase. Transmission electron microscopy study of the x=0.04 composition reveals the existence of antiferroelectric phase with a⁰a⁰c⁺ oxygen octahedron tilting which is in the form of nano-domains. Polarization-electric field and current-electric field hysteresis loops demonstrate that the increase of BA concentration destroys the ferroelectric order and strengthens antiferroelectric order. A much enhanced energy storage density of 1.15 J/cm³ and efficiency of 73.2% is achieved under 105 kV/cm at x=0.06. In addition, its energy storage property is found to depend weakly on temperature within the measurement range of 25–150 °C.     

Structural,dielectric and piezoelectric properties of (Bi0.5Na0.5)TiO3–(Bi0.5K0.5)TiO3–Bi(Zn0.5Ti0.5)O3 thin films prepared by sol–gel method

Lead free (1−x)(0.8Bi_0.5Na_0.5Ti_0.5O₃–0.2Bi_0.5K_0.5TiO₃)–xBiZn_0.5Ti_0.5O₃ (x=0–0.06) (BNT–BKT–BZT) thin films were deposited on Pt(111)/Ti/SiO₂/Si(100) substrates by a sol–gel processing technique. The effects of BZT content on the structural, dielectric, ferroelectric and piezoelectric properties of the BNT–BKT–BZT thin films were investigated systematically. The BNT–BKT–BZT thin films undergo a transition from ferroelectric to relaxor phase with increasing temperature. The phase transition temperature decreases with the increase of BZT content. The BNT–BKT–BZT thin film with x=0.04 exhibits the best ferroelectric properties (P_max=40 µC/cm² and P_r=10 µC/cm²), largest dielectric constant (ε=560) and piezoelectric constant (d₃₃=40 pm/V). This finding demonstrates that the BNT–BKT–BZT thin film has an excellent potential for demanding high piezoelectric properties in lead free films.     

Bi0.5Na0.5TiO3基无铅压电陶瓷的研究进展

随着经济的发展和人们环保意识的增强,无铅压电陶瓷的研究和开发越来越引起人们的重视.由于钛酸铋钠(Bi0.5Na0.5TiO3,简称为BNT)基无铅压电陶瓷具有良好的铁电性和高的剩余极化引起了广大学者的关注.本文分析了BNT基无铅压电陶瓷的研究进展,其中晶粒取向生长技术是提高其压电性能的一个重要途径.本文还介绍了一种溶剂热法制备织构化BNT基无铅压电陶瓷的方法.     

Enhancing the dielectric and energy storage properties of lead-free Na0.5Bi0.5TiO3–BaTiO3 ceramics by adding K0.5Na0.5NbO3 ferroelectric

A novel strategy of enhancing the dielectric and energy storage properties of Na_0.5Bi_0.5TiO₃–BaTiO₃ (NBT–BT) ceramics by introducing a K_0.5Na_0.5NbO₃ (KNN) ferroelectric phase is proposed herein, and its underlying mechanism is elucidated. The lead-free KNN ceramic decreases the residual polarisation and increases the electric breakdown strength of the NBT–BT matrix through the simultaneous modification of its A-sites and B-sites. The obtained NBT?BT?x?KNN ceramics have a perovskite structure with unifying grains. A bulk 0.9NBT–BT–0.1KNN ceramic sample with a thickness of 0.2 mm possesses a high energy storage density of 2.81 J/cm³ at an applied electric field of 180 kV/cm. Moreover, it exhibits good insulation properties and undergoes rapid charge and discharge processes. Therefore, the obtained 0.9NBT–BT–0.1KNN ceramic can be potentially used in high-power applications because of its high energy density, good insulation properties, and large discharge rate.     

Phase transition and energy storage properties of Bi0.5Na0.5TiO3–Bi(Mg2/3Nb1/3)O3 lead-free ceramics

Bi_0.5Na_0.5TiO₃ (BNT) lead-free ceramics have been extensively studied due to their excellent dielectric, piezoelectric and ferroelectric properties. The phase structure and functionalities of BNT can be feasibly adjusted by doping/forming solid solutions with other elements/components. In this work, Bi(Mg_2/3Nb_1/3)O₃ (BMN) was introduced into BNT by a conventional solid-state reaction to form a homogeneous solid solution of (1-x)(Bi_0.5Na_0.5)TiO₃-xBi(Mg_2/3Nb_1/3)O₃ (BNT-xBMN) with a perovskite structure. With the increase of BMN content, a phase transition from rhombohedral R3c to tetragonal P4bm has been confirmed by XRD, along with shifting the ferroelectric-paraelectric phase transition temperature to lower temperatures with broadening dielectric peaks. Furthermore, an optimized recoverable energy density of 1.405 J/cm³ was achieved for BNT-0.10BMN ceramics under a low applied electric field of 140 kV/cm, which is mainly attributed to the transformation from ferroelectric to ergodic relaxor phase.