Assembly of foam and honeycomb films of a diblock copolymer doped with Au or Ag nanoparticles at the liquid/liquid interface and their catalytic properties

Composite thin films of poly(t-butyl methacrylate)-block-poly(2-vinyl pyridine) (PtBMA-b-P2VP) doped with silver or gold nanoclusters or nanoparticles were fabricated at the liquid/liquid interface between the polymer chloroform solution and AgNO₃ or HAuCl₄ aqueous solution. The formation of the thin films results from the adsorption of the polymer molecules at the interface, combination with the inorganic species in the water phases, and self-assembly of the composite molecules. Different from homo-P2VP and polystyrene-block-poly(2-vinyl pyridine) (PS-b-P2VP) that self-assemble into foam film and honeycomb structure, respectively, two kinds of morphologies (foam and honeycomb structures) are formed simultaneously for PtBMA-b-P2VP, reflecting different assembling behaviors of these polymers at the interface. Silver or gold nanoclusters or nanoparticles were generated in the polymer films during the assembly process and further reduction of the combined precursors, which show high catalytic activity and durability for the reduction of 4-nitrophenol and other nitro-compounds.     

Conformal polymeric thin films by low-temperature rapid initiated chemical vapor deposition (iCVD) using tert-butyl peroxybenzoate as an initiator

Conformal poly(cyclohexyl methacrylate) (pCHMA) thin films were synthesized via initiated chemical vapor deposition (iCVD), with tert-butyl peroxybenzoate (TBPOB) as the initiator, representing the first time that TBPOB has been used as an initiator for iCVD synthesis. Using TBPOB instead of tert-butyl peroxide (TBPO), the rate of iCVD film growth increased by a factor of up to seven at comparable conformality and lower the filament temperature from 257 to 170 °C at a comparable deposition rate of 3 nm/min. The conformal deposition of functional thin films is desired for applications including microfluidics, medical devices and membranes. Lower filament temperatures reduce the heat load to the deposition surface and thus are advantageous for polymeric substrates that are temperature sensitive or monomers that decompose at high temperatures. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) results demonstrate the similarity of the TBPOB- to the TBPO-initiated pCHMA main chains. However, the aromatic group in TBPOB provided a unique spectral signature of the polymer chain end group in the FTIR and the peak intensity increased with increase of filament temperature. Scanning electron micrographs (SEMs) revealed that the pCHMA coatings are conformal over non-planar structures; however, at identical process conditions, TBPO-initiated films showed a slightly better conformality due to the lower sticking coefficient of TBPO. At a monomer partial pressure of 0.45, TBPOB has a sticking coefficient value of 0.1188 ± 0.0092, which is ～3 times as high as that of TBPO (0.0413 ± 0.0058). The step coverage is insensitive to filament temperature if the surface concentration of the monomer is fixed.     

Facile synthesis of thick films of poly(methyl methacrylate), poly(styrene), and poly(vinyl pyridine) from Au surfaces

Atom transfer radical polymerization (ATRP) is commonly used to grow polymer brushes from Au surfaces, but the resulting film thicknesses are usually significantly less than with ATRP from SiO(2) substrates. On Au, growth of poly(methyl methacrylate) (PMMA) blocks from poly(tert-butyl acrylate) brushes occurs more rapidly than growth of PMMA from initiator monolayers, suggesting that the disparity between growth rates from Au and SiO(2) stems from the Au surface. Radical quenching by electron transfer from Au is probably not the termination mechanism because polymerization from thin, cross-linked initiators gives film thicknesses that are essentially the same as the thicknesses of films grown from SiO(2) under the same polymerization conditions. However, this result is consistent with termination through desorption of thiols from noncross-linked films, and reaction of these thiols with growing polymer chains. The enhanced stability of cross-linked initiators allows ATRP at temperatures up to ～100 °C and enables the growth of thick films of PMMA (350 nm), polystyrene (120 nm) and poly(vinyl pyridine) (200 nm) from Au surfaces in 1 h. At temperatures >100 °C, the polymer brush layers delaminate as large area films.     

Defining the nanostructured morphology of triblock copolymers using resonant soft X-ray scattering

The morphologies of a poly(1,4-isoprene)-block-polystyrene-block-poly(2-vinyl pyridine) (IS2VP) copolymer were investigated using resonant soft X-ray scattering (RSoXS) together with scanning force microscopy, small-angle X-ray scattering, and electron microscopy. Differences in the nanoscopic morphologies in the bulk and thin film samples were observed arising from the competition between segmental interactions between the blocks and the substrate and the surface energies of each block. Using soft X-rays at selected photon energies to isolate the scattering contribution from different polymer blocks, RSoXS unambiguously defined the complex morphology of the triblock copolymer. In the bulk sample, two nested, hexagonal arrays of P2VP and PI cylindrical microdomains residing in the PS matrix were observed. The cylindrical microdomains of one component were found to be located at the interstitial sites of the hexagonal array of the other component that has the larger d spacing. In solvent-annealed thin films with 40 nm in thickness, a hexagonal array of core-shell microdomains of P2VP cores with PS shells that reside in a PI matrix were observed.     

Model polymer nanocomposites provide an understanding of confinement effects in real nanocomposites

Owing to the improvement of properties including conductivity, toughness and permeability, polymer nanocomposites are slated for applications ranging from membranes to fuel cells. The enhancement of polymer properties by the addition of inorganic nanoparticles is a complex function of interfacial interactions, interfacial area and the distribution of inter-nanofiller distances. The latter two factors depend on nanofiller dispersion, making it difficult to develop a fundamental understanding of their effects on nanocomposite properties. Here, we design model poly(methyl methacrylate)-silica and poly(2-vinyl pyridine)-silica nanocomposites consisting of polymer films confined between silica slides. We compare the dependence of the glass-transition temperature (Tg) and physical ageing on the interlayer distance in model nanocomposites with the dependence of silica nanoparticle content in real nanocomposites. We show that model nanocomposites provide a simple way to gain insight into the effect of interparticle spacing on Tg and to predict the approximate ageing response of real nanocomposites.     

Structural properties of silver particulate films deposited on softened polymer blends of polystyrene/poly (2-vinyl pyridine)

Results of the structural studies of silver particulate films deposited at a rate of 0.4 nm/s on polymeric blends of polystyrene/poly (2-vinyl pyridine), PS/P2VP held at a temperature 457 K by evaporation in a vacuum of 8 × 10⁻⁶ Torr are reported here. The morphology of silver particulate films, characterized by their size, size distribution, shape and inter-particle separation, was observed to modify due to blending of PS with P2VP and amount of silver deposited. The red shift in the plasmon resonance indicates the effect of blending P2VP with PS. Scanning electron microscopy was used to study the change in morphology of the silver nanoparticles in correlation with the optical properties of silver particulate films on PS/P2VP blends. The silver nanoparticles on the thin layers of polymer blends exhibited much smaller, narrower dispersion and wide size distribution due to blending of PS with P2VP.     

Controlling pore morphology and properties of nanoporous silica films using the different architecture PS-b-P2VP as a template

Nanoporous silica films were prepared through the templating of amphiphilic block copolymer, poly(styrene-2-vinyl pyridine) (PS-b-P2VP), and monodispersed colloidal silica nanoparticles. The experimental and theoretical studies suggested that the intermolecular hydrogen bonding existes between the colloidal silica nanoparticles and PS-b-P2VP. The effects of the loading ratio and P2VP chain length on the morphology and properties of the prepared nanoporous silica films were investigated. TEM and AFM studies showed that the uniform pore size could be achieved and the pore size increased with increasing porogen loading. The refractive index and dielectric constant of the prepared nanoporous films decreased with an increase in PS-b-P2VP loading. On the other hand, the porosity increased with an increasing PS-b-P2VP loading. This study demonstrated a methodology to control pore morphology and properties of the nanoporous silica films through the templating of PS-b-P2VP.     

Directed assembly of cylinder-forming block copolymer films and thermochemically induced cylinder to sphere transition: a hierarchical route to linear arrays of nanodots

A morphological transition from cylinders to spheres was induced in an asymmetric diblock copolymer, poly(styrene)-block-poly(tert-butyl acrylate) (PS-b-PtBA). The periodic arrays of the poly(tert-butyl acrylate) (PtBA) domains were transformed to the ordered poly(acrylic anhydride) (PAA) spheres via the thermal deprotection of tert-butyl acrylate linkages and the subsequent volume change of the minority block. Coupled with techniques to direct the assembly of cylinder-forming block copolymers, this finding provides new routes to fabricate ordered geometries of nanodot arrays.     

RAFT聚合合成聚丙烯酸-b-聚(N-异丙基丙烯酰胺)嵌段共聚物的自组装行为

采用可逆加成-断裂链转移自由基聚合方法制备了聚丙烯酸叔丁酯-b-聚(N-异丙基丙烯酰胺)(PtBA-b-PNIAAm)嵌段共聚物,用核磁共振谱和凝胶渗透色谱对其结构和组成进行了表征。通过水解反应脱去嵌段PtBA的叔丁基得到聚丙烯酸-b-聚(N-异丙基丙烯酰胺)(PAA-b-PNIAAm)嵌段共聚物,使用核磁共振谱确定了其水解率约为85.5%。使用动态光散射和原子力显微镜技术对其在水溶液中的温度和pH敏感性自组装行为做了初步研究。结果表明,PAA-b-PNIAAm胶束的临界聚集pH值约为5.3,最低临界溶解温度(LCST)约为34.0℃。     

Ellipsometric determination of optical properties of carbazole-containing poly(l-glutamate) thin films prepared from different solvents

In this study, the refractive indices (n) and thicknesses of carbazole-containing hole-transport materials such as poly(γ-carbazolylethyl l-glutamate) (PCELG) and poly(N-vinyl carbazole) (PVCz) films were determined by carrying out ellipsometric measurements. The thicknesses of PCELG and PVCz films determined by ellipsometric analysis were in good agreement with those determined by surface profilometry. The dependence of the refractive indices of the PCELG films on film thickness was classified into two types on the basis of the solvent from which the films were prepared: the refractive indices either increased with increasing film thickness, as in the case of PCELG films prepared from 1,2-dichloroethane (DCE) and monochlorobenzene (?-Cl), or were independent of the film thickness, as in the case of films prepared from 1,1,2,2-tetrachloroethane (TCE). A comparison of these results with the structures of the polymers, as determined by ¹H NMR, reveals that the two types of dependences of the refractive indices of the PCELG thin film on the film thickness can be attributed to the two types of aggregation structures and/or orientational characteristics corresponding to the helical conformation of the polymer. In contrast, the refractive indices of PVCz films are governed mainly by the film thickness. Finally, we would like to emphasize that the combination of ellipsometry and other techniques such as NMR and surface profilometry provide information not only on the film thickness and refractive index but also on the aggregation structure in thin films with thicknesses on the order of 50 nm.     

The color tuning of PS-b-P2VP lamellar films with changing the alkyl chain length of 1-iodoalkanes

Photonic crystals with tunability in the visible or near-infrared region have drawn increasing attention for controlling and processing light for the active components of future display. We prepared polystyrene-b-poly(2-vinyl pyridine) (PS-b-P2VP) lamellar films which is hydrophobic block-hydrophilic polyelectrolyte block polymer of 57 kg/mol-b-57 kg/mol. The lamellar stacks, which is alternating layer of hydrophilic and hydrophobic moiety of PS-b-P2VP, are obtained by exposing the spin coated film under chloroform vapor. The band gaps of the lamellar films interestingly varied after immersion into the quaternizing solvents containing 5 wt% of iodomethane, iodoethane, 1-iodobutane, 1-iodopentane, 1-iodohexane and 1-iodooctane solubilized in n-hexane. The iodoalkanes reacted with pyridine groups in PS-b-P2VP and generated the alkyl pyridinium salts readily. The degree of quaternization, alkyl chain length of iodoalkane and the salt water concentration affects the spacing of layer structure of PS-b-P2VP. The iodomethane and iodohexane produced similar band gaps and salt concentration dependence. These results are very much dependent on the hydrophobic-hydrophilic characters of PS-b-P2VP lamellar surface.     

Patterned polymer carpets

For the development of polymer carpets as active devices for micro- and nanotechnology, a control of the polymer carpet morphology and especially control of the stimulus responsive polymer brush is needed. Here, we report on the first example for the fabrication of patterned polymer carpets. On a two-dimensional framework of fully crosslinked and chemically patterned nanosheets, polymer brushes of styrene and 4-vinyl pyridine were grafted by self-initiated surface photopolymerization and photografting (SIPGP). It was found that polymer grafting by SIPGP occurred over the entire nanosheets but with a preferred grafting on the amino functionalized nanosheet areas. This results in continuous polymer carpets with an intact nanosheet framework but with amplification of the chemical patterning into a three dimensional topography of the grafted polymer brush. In the case of negative patterned nanosheets, the patterned carpet could be prepared as freestanding ultrathin membranes. Furthermore, swelling experiments with poly(4-vinyl pyridine) carpets showed that the patterns induces a directional buckling of the flexible polymer carpet. This may open the possibility of the development of micro- or nanoactuator devices with anisotropic responds upon environmental changes.     

Atomic Layer Deposition for Membranes,Metamaterials, and Mechanisms

Bending and folding techniques such as origami and kirigami enable the scale‐invariant design of 3D structures, metamaterials, and robots from 2D starting materials. These design principles are especially valuable for small systems because most micro‐ and nanofabrication involves lithographic patterning of planar materials. Ultrathin films of inorganic materials serve as an ideal substrate for the fabrication of flexible microsystems because they possess high intrinsic strength, are not susceptible to plasticity, and are easily integrated into microfabrication processes. Here, atomic layer deposition (ALD) is employed to synthesize films down to 2 nm thickness to create membranes, metamaterials, and machines with micrometer‐scale dimensions. Two materials are studied as model systems: ultrathin SiO₂ and Pt. In this thickness limit, ALD films of these materials behave elastically and can be fabricated with fJ‐scale bending stiffnesses. Further, ALD membranes are utilized to design micrometer‐scale mechanical metamaterials and magnetically actuated 3D devices. These results establish thin ALD films as a scalable basis for micrometer‐scale actuators and robotics.     

A facile preparative method for Au-core, block copolymer-shell nanoparticles by UV irradiation of polystyrene-block-poly (2-vinyl pyridine)/HAuCl4 solutions

The synthesis of gold nanoparticles (AuNPs) by UV irradiation of the solution of polystyrene-block-poly(2-vinyl pyridine)/HAuCl4 (PS-b-PVP/HAuCl4) complexes was investigated. AuNPs with block copolymer shell structures can be easily generated by simply control of the block copolymer concentration and the loading ratio of the HAuCl4 precursor. The cross-linked block copolymer shell structures were determined by transmission electron microscopy (TEM), contact angle measurement and thermogravimetic analysis (TGA). The obtained AuNPs with copolymer shells are stable in organic solvents and biochemical buffers.     

Structural characterization and porosity analysis in self-supported porous alumina-silica thin films

In this study, alumina, silica and alumina-silica binary (36% mol silica) thin films are synthesized using the sol-gel technique. These form the basis for future gas separation membranes. The characterization of the synthesized oxides was performed using nitrogen physisorption, X-ray diffraction (XRD), Doppler-broadening measurements on the 511 keV annihilation photon peak, together with 3γ/2γ analysis, and Fourier transform infrared spectroscopy (FTIR) of adsorbed CO. It is found that silica is microporous, γ-alumina is mesoporous, and the binary material shows fingerprints of both the meso- and microporous nature of its constituents as well as of the respective crystal structures. These results open the possibility to also investigate thin supported porous films (a few microns thick), and especially the setting and drying aspects on porous supports for membrane production, using the positron annihilation technique.     

Guest effect on nanopatterned spin-crossover thin films

Nanopatterned thin films of the metal-organic framework {Fe(bpac)[Pt(CN)4]} (bpac=bis(4-pyridyl)acetylene) are elaborated by the combination of a sequential assembly process and a lithographic method. Raman microspectroscopy is used to probe the temperature dependence of the spin state of the iron(II) ions in the films (40-90 nm in thickness), and reveals an incomplete but cooperative spin transition comparable to that of the bulk material. Adsorption/desorption of pyridine guest molecules is found to have a substantial influence on the spin-crossover properties of the thin layers. This interplay between host-guest and spin-crossover properties in thin films and nanopatterns demonstrates the potential ability of using this kind of material as a microsensor.     

Preparation of poly(acrylic)/SiO2/EuL3 x 2H2O, hybrid thin films from monodispersed colloidal silica

In this study, poly(acrylic)/SiO2/EuL3 x 2H2O hybrid thin films were prepared from various acrylic monomers (MMA and EDMA/TMPTA), lanthanide metal complexes (EuL3 x 2H2O, L = pyridine carboxylic acid), and monodispersed colloidal silica with a coupling agent, 3-(trimethoxysilyl)propyl methacrylate (MSMA). It is a combination of the sol-gel reaction, thermal polymerization, and spin coating. The silica content in the hybrid thin films is fixed at 20 wt%, and the EuL3 x 2H2O content is varied from 0.01 g to 0.07 g. FTIR and EA analysis confirms the chemical structure of the prepared EuL3 x 2H2O and poly(acrylic)/SiO2/EuL3 x 2H2O hybrid thin films. UV-Vis spectra and n&k analysis shows that the hybrid thin film has good transparency in visible light. The refractive index of hybrid thin films can be effectively controlled through the EuL3 x 2H2O content. The PL spectra shows that the strongest emission peak occurs at 615 nm and the emission intensity increases to the peak maximum at an EuL3 x 2H2O content of 0.05 g. Both TGA and PL analysis show that the prepared hybrid thin films from the crosslinked acrylic polymer moiety have much better film uniformity, thermal stability, and fluorescence properties. The TEM diagram shows that the MSMA/SiO2/EuL3 x 2H2O particles with a size 15-20 nm are well dispersed in the reaction solution. The SEM diagram shows that the particle distribution in the prepared hybrid thin films is uniform and no phase separation is observed. Finally, AFM analysis indicates that the prepared hybrid thin films have an excellent surface planarity.     

Automatic feedback control of relative blood volume changes during hemodialysis improves blood pressure stability during and after dialysis

Automatic feedback systems have been designed to control relative blood volume changes during hemodialysis (HD) as hypovolemia plays a major role in the development of dialysis hypotension. Of these systems, one is based on the concept of blood volume tracking (BVT). BVT has been shown to improve intra-HD hemodynamic stability. We first questioned whether BVT also improves post-HD blood pressure stability in hypotension-prone patients and second, whether BVT is effective in reducing the post-HD weight as many hypotension-prone patients are overhydrated because of an inability to reach dry weight. After a 3-week period on standard HD, 12 hypotension-prone patients were treated with two consecutive BVT treatment protocols. During the first BVT period of 3 weeks, the post-HD target weight was kept identical compared with the standard HD period (BVT-constant weight; BVT-cw). During the second BVT period of 6 weeks, we gradually tried to lower the post-HD target weight (BVT-reduced weight; BVT-rw). In the last week of each period, we studied intra-HD and 24 hr post-HD blood pressure behavior by ambulatory blood pressure measurement (ABPM). Pre- and post-HD weight did not differ between standard HD and either BVT-cw or BVT-rw. Heart size on a standing pre-dialysis chest X-ray did not change significantly throughout the study. There were less episodes of dialysis hypotension during BVT compared with standard HD (both BVT periods: p<0.01). ABPM data were complete in 10 patients. During the first 16 hr post-HD, systolic blood pressure was significantly higher with BVT in comparison with standard HD (both BVT periods: p<0.05). The use of BVT in hypotension-prone patients is associated with higher systolic blood pressures for as long as 16 hr post-HD. BVT was not effective in reducing the post-HD target weight in this patient group.     

Thin films of tin sulphide for use in thin film solar cell devices

SnS is of interest for use as an absorber layer and the wider energy bandgap phases e.g. SnS₂, Sn₂S₃ and Sn/S/O alloys of interest as Cd-free buffer layers for use in thin film solar cells. In this work thin films of tin sulphide have been thermally evaporated onto soda-lime glass substrates with the aim of optimising the properties of the material for use in superstrate configuration device structures. The thin films were characterised using energy dispersive X-ray analysis (EDS) to determine the film composition, X-ray diffraction (XRD) to determine the phases present and structure of each phase, transmittance versus wavelength measurements to determine the energy bandgap and scanning electron microscopy (SEM) to observe the surface topology and topography. These properties were then correlated to the deposition parameters. Using the optimised conditions it is possible to produce thin films of tin sulphide that are pinhole free and conformal to the substrate that are suitable for use in thin film solar cell structures.     

Étude spectroscopique des films minces deposés à l'interface par excitation optique des plasmons de surface

Surface plasmons (SPs) are collective charge density waves which are confined to the interfacial region between an active medium (e.g. silver) and a dielectric (electrolyte). They can be excited by light under the attenuated total reflection condition. We used the focused attenuated total reflection method in which SP excitation is recognized as a dark line in the p-polarized reflected light cone. The presence of an adsorbent or a film leads to modifications in the dispersion curve from which the optical properties of the film can be derived.In this paper we present both theoretical and experimental investigations of thin dielectric films with an optical absorption band. The results show clearly the correlation between the structures which appear in the dispersion curve and the optical properties of the film.In a previous investigation we have studied the pyridine-Ag system and we found that the activation cycle for silver (usually used in surface-enhanced Raman spectroscopy) in a chloride-containing electrolyte and in the presence of pyridine leads to the formation of a surface complex which exhibits an absorption band in the near-IR, a region in which pyridine itself does not absorb. We present here some preliminary results for rhodamine B adsoption on silver in order to correlate quantitatively the optical properties of this well-known dye and the anomalous structures which induces on the SP dispersion curve for silver.