铝电解用NiFe2O4-Cu金属陶瓷惰性阳极的制备

以高温固相合成法合成的NiFe2O4陶瓷粉体和金属Cu粉为原料, 采用冷压-烧结法制备了Cu含量在5%～20%之间的NiFe2O4-Cu金属陶瓷惰性阳极, 研究了烧结气氛和烧结温度对其物相组成、微观形貌和基本物理性能的影响. 结果表明 通过控制烧结气氛中氧分压在NiO和Cu2O的离解反应平衡氧分压之间, 可以制备出具有目标物相组成的NiFe2O4-Cu金属陶瓷; 烧结温度和保温时间对所得NiFe2O4-Cu金属陶瓷的相对密度有较大影响; NiFe2O4和Cu之间的不润湿性限制了NiFe2O4-Cu金属陶瓷烧结温度的提高和保温时间的延长, 在保证金属相分布均匀且不溢出的前提下, 所制备的NiFe2O4-Cu金属陶瓷的相对密度较小; 金属相Cu含量越高, NiFe2O4-Cu金属陶瓷最高烧结温度越低、最长保温时间越短, 从而相对密度越低、孔隙率越高; 除了尽量降低金属相含量外, 还可向NiFe2O4-Cu金属陶瓷中添加其他金属如Ni和Co等, 以改善陶瓷相与金属相之间的润湿性, 以提高烧结温度, 进而提高其相对密度和耐腐蚀性能.     

Yb_2O_3掺杂对15(20Ni-Cu)/(NiFe_2O_4-10NiO)金属陶瓷性能的影响

采用冷压-烧结技术制备NiFe2O4-10NiO基金属陶瓷材料;通过对烧结体的显微结构和物相组成、电导率、电解试样的表层形貌、电解质和阴极铝的杂质增量等的分析检测,研究Yb2O3掺杂对15(20Ni-Cu)/NiFe2O4-10NiO金属陶瓷致密度、导电率和耐腐蚀性能的影响。结果表明:1 300℃烧结的0.5%Yb2O3-15(20Ni-Cu)/(NiFe2O4-10NiO)金属陶瓷具有较好的性能,相对密度为98.53%,960℃时的电导率为53.06 S/cm,电解腐蚀后金属腐蚀层厚度为20~30μm,总杂质增量为0.079 g。     

17（Cu-10Ni）-（NiFe2O4-10NiO）基金属陶瓷在铝电解过程中的相演变（英文）

采用冷压气氛烧结制备17(Cu-10Ni)-(NiFe2O4-10NiO)金属陶瓷,并作为阳极在960°C下分别进行10和40h的铝电解试验。对电解前后金属陶瓷的显微结构、物相成分进行分析检测。对电解质及阴极金属中的杂质含量进行分析,研究阳极组成中Fe、Ni和Cu元素的腐蚀行为。研究发现:在电解过程中,在材料表面形成NiFe2O4相致密层,该致密层随电解时间的延长而增厚。在NiFe2O4相致密层形成与增厚过程中,出现NiFe2O4相吞噬NiO相和金属相氧化的现象,金属陶瓷中Cu元素优先腐蚀溶解。并着重讨论NiFe2O4相致密层形成与增厚过程中金属相的腐蚀形式及NiO相向NiFe2O4相的转变机制。     

烧结气氛对5Ni/(10Ni-NiFe_2O_4)金属陶瓷物相组成及力学性能的影响(英文)

在不同烧结气氛下采用冷压烧结法制备5Ni/(10NiO-NiFe2O4)金属陶瓷,通过XRD研究其物相组成,SEM研究其显微结构,并用三点抗弯测试和抗热震实验检测其力学性能。结果表明:在真空气氛及氧含量分别为2×10-5、2×10-4和2×10-3的气氛中均可获得Ni/(10NiO-NiFe2O4)金属陶瓷,但气氛中氧含量对物相含量影响较大。在真空气氛中NiO含量相对较高。材料中NiFe2O4和Ni的含量分别随着气氛中氧含量的上升而增加和减小;在真空烧结气氛中,可获得晶粒尺寸为3.90μm的5Ni/(10NiO-NiFe2O4)金属陶瓷,其抗弯强度可达138.59MPa,且在960°C实验条件下平均抗热震循环次数可达6.67次,具有相对较好的力学性能。     

铁酸镍基金属陶瓷的强化烧结与熔盐腐蚀行为

采用气氛烧结方法制备NiFe2O4基金属陶瓷材料,并进行960℃的铝电解腐蚀实验.通过分析烧结体的显微结构和物相组成、电解试样的表层形貌与成分以及电解质和阴极铝的杂质含量等,研究BaO、Yb2O3和CoO的添加以及金属相的组成对NiFe2O4基金属陶瓷烧结性能的影响;表征J该金属陶瓷强化烧结体作为铝电解惰性阳极的电解腐蚀性能;并对材料强化烧结机制和熔盐腐蚀行为进行探讨.结果表明烧结过程中,BaO和Yb2O3与该金属陶瓷中的陶瓷相反应生成新的物相,CoO与陶瓷相形成固溶体,并加快烧结致密化进程;以Cu-Ni取代纯Cu和纯Ni作为金属陶瓷的金属相,可提高材料的相对密度;NiFe2O4基金属陶瓷的高致密度可抑制电解过程中金属相的流失和陶瓷相的腐蚀,阳极表层也转变为致密的NiFe2O4相.     

气氛对NiFe2O4陶瓷烧结致密化的影响

采用不同的烧结工艺制备了NiFe2O4陶瓷材料,研究了真空、大气、N2 3种气氛对NiFe2O4陶瓷材料烧结致密度的影响,解决了烧结过程中NiFe2O4陶瓷的离解问题.结果表明:在制备NiFe2O4陶瓷过程中,烧结气氛严重影响着陶瓷的离解和致密化;真空烧结将导致NiFe2O4陶瓷的离解,N2气氛保护烧结所制备出的NiFe2O4陶瓷样品的密度较大气气氛烧结所制备出的样品的密度高出14.6%～32.6%.分析结果表明:因NiFe2O4陶瓷高温失氧所带来的表面能和晶体缺陷的差异是影响其致密化的关键;无论在何种气氛下烧结,提高烧结温度都有利于提高NiFe2O4样品的烧结密度.     

胞状结构NiFe2O4/Ni金属陶瓷的制备及性能

采用结构功能化设计理念,使用共挤压成形工艺制备具有胞状结构的NiFe2O4/Ni金属陶瓷坯体。试样在1 350℃的氮气气氛下进行烧结。结果表明,在构造胞状结构过程中,有机添加剂起到了粉末流动载体及对坯件的保形作用。对所得试样导电性能及力学性能的分析结果表明,与同等Ni含量NiFe2O4/Ni均匀体试样相比,胞状结构试样的电导率有显著提高且与富Ni层中的金属含量有关;虽然胞状结构材料的抗弯强度高于同等金属含量NiFe2O4/Ni均匀体,但随着富Ni层金属含量的提高材料的抗弯强度呈下降趋势。     

电流密度对铝电解NiFe_2O_4基金属陶瓷惰性阳极腐蚀的影响

在Na3AlF6-K3AlF6-AlF3-Al2O 3熔体中,研究电流密度对22(Ni+Cu)/(NiFe2O4-10NiO)金属陶瓷惰性阳极腐蚀速率的影响,并分析腐蚀后阳极的微观结构。结果表明,随着电流密度的升高,NiFe2O4基金属陶瓷惰性阳极腐蚀从以化学溶解腐蚀为主逐渐转变为以电化学腐蚀为主,腐蚀率先降低而后增大。当电流密度从1.0 A/cm2增大至1.6 A/cm2时,阳极年腐蚀率从1.22 cm/a降低至0.137 cm/a;进一步提高电流密度至4.0 A/cm2时,阳极年腐蚀率增大到4.96 cm/a。     

铝电解用NiFe2O4-10NiO基金属陶瓷惰性阳极的耐腐蚀性能

制备铝电解用NiFe2O4-10NiO基金属陶瓷惰性阳极,并在实验室电解槽中考察其电解腐蚀性能。结果表明,电解过程中虽然惰性阳极在960°C熔盐电解质中表现出优异的耐腐蚀性能,但采用XRD、SEM/EDX和金相分析其物相组成和微观结构后发现,电解后阳极中的金属相发生了优先腐蚀,在阳极表面产生大量孔洞。NiFe2O4相中的 Fe 元素的优先溶解可能导致 NiFe2O4晶粒的不均匀腐蚀。溶解在电解液中的 Al2O3与阳极中的 NiO 或FeO 发生反应生成的 NiFe2O4-NiAl2O4-FeAl2O4相对 NiO 相的吞并以及体积膨胀,阳极表面形成致密的NiFe2O4-NiAl2O4-FeAl2O4保护层。因此,致密的NiFe2O4-NiAl2O4-FeAl2O4保护层可以阻挡阳极表面金属相的损失和陶瓷相的腐蚀。     

高能球磨法制备NiFe2O4基惰性阳极

本文以NiO和Fe2O4为主要原料,采用机械化合两步烧结法制备NiFe2O4基金属陶瓷试样。研究了球磨时间、助磨剂含量、球磨转速对制备前驱体粒度的影响,并利用X射线衍射和扫描电子显微镜等进行表征。结果表明,球磨参数越好,粉体颗粒越细,提高冷等静压压坯的致密度、降低试样烧结温度,最终提高惰性阳极试样密度,改善试样的导电性和抗腐蚀性等性能并达到保护环境、节约能源的效果。本实验制备惰性阳极球磨阶段最佳球磨条件为：助磨剂含量150ml、球磨时间6h、球磨转速300r／min,此条件下制得了体积密度为5．68g／ml的阳极试样。     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

Thermodynamics Study on the Decomposition of Chromite with KOH

Institute of Process Engineering, Chinese Academy of Sciences, China, has proposed a method for oxidative leaching of chromite with potassium hydroxide. Understanding the mechanism of chromite decomposition, especially in the potassium hydroxide fusion, is important for the optimization of the operating parameters of the oxidative leaching process. A traditional thermodynamic method is proposed and the thermal decomposition and the reaction decomposition during the oxidative leaching of chromite with KOH and oxygen is discussed, which suggests that chromite is mainly destroyed by reactions with KOH and oxygen. Meanwhile, equilibrium of the main reactions of the above process was calculated at different temperatures and oxygen partial pressures. The stable zones of productions, namely, K2CrO4 and Fe2O3, increase with the decrease of temperature, which indicates that higher temperature is not beneficial to thermodynamic reactions. In addition, a comparison of the general alkali methods is carried out, and it is concluded that the KOH leaching process is thermodynamically superior to the conventional chromate production process.     

Influence of Heat Treatment on Damping Behaviour of the Magnesium Wrought Alloy AZ61

The effect of isochronal heat treatments for 1h on variation of damping, hardness and microstructural change of the magnesium wrought alloy AZ61 was investigated. Damping and hardness behaviour could be attributed to the evolution of precipitation process. The influence of precipitation on damping behaviour was explained in the framework of the dislocation string model of Granato and Lücke.     

Effect of Rare Earth Doping on Impedance,Modulus and Conductivity Properties of Multiferroic Composites:0.5(BiLa_xFe_(1-x)O_3)–0.5(PbTiO_3)

The Lanthanum-doped bismuth ferrite–lead titanate compositions of 0.5(Bi LaxFe1-xO3)–0.5(Pb Ti O3)(x = 0.05,0.10,0.15,0.20)(BLxF1-x-PT) were prepared by mixed oxide method.Structural characterization was performed by X-ray diffraction and shows a tetragonal structure at room temperature.The lattice parameter c/a ratio decreases with increasing of La(x = 0.05–0.20) concentration of the composites.The effect of charge carrier/ion hopping mechanism,conductivity,relaxation process and impedance parameters was studied using an impedance analyzer in a wide frequency range(102–106Hz) at different temperatures.The nature of Nyquist plot confirms the presence of bulk effects only,and non-Debye type of relaxation processes occurs in the composites.The electrical modulus exhibits an important role of the hopping mechanism in the electrical transport process of the materials.The ac conductivity and dc conductivity of the materials were studied,and the activation energy found to be 0.81,0.77,0.76 and 0.74 e V for all compositions of x = 0.05–0.20 at different temperatures(200–300 °C).     

Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Austenite in Quenching–Partitioning–Tempering Steels

The orientation relationships(ORs)between the martensite and the retained austenite in low-and medium-carbon steels after quenching–partitioning–tempering process were studied in this work.The ORs in the studied steels are identified by selected-area electron diffraction(SAED)as either K–S or N–W ORs.Meanwhile,the ORs were also studied based on numerical fitting of electron backscatter diffraction data method suggested by Miyamoto.The simulated K–S and N–W ORs in the low-index directions generally do not well coincide with the experimental pole figure,which may be attributed to both the orientation spread from the ideal variant orientations and high symmetry of the low-index directions.However,the simulated results coincide well with experimental pole figures in the high-index directions{123}_(bcc).A modified method with simplicity based on Miyamoto’s work was proposed.The results indicate that the ORs determined by modified method are similar to those determined by Miyamoto’method,that is,the OR is near K–S OR for the low-carbon Q–P–T steel,and with the increase of carbon content,the OR is closer to N–W OR in medium-carbon Q–P–T steel.     

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

This work was to reveal the residual stress profile in electron beam welded Ti-6Al-4V alloy plates(50 mm thick) by using finite element and contour measurement methods.A three-dimensional finite element model of 50-mmthick titanium component was proposed,in which a column–cone combined heat source model was used to simulate the temperature field and a thermo-elastic–plastic model to analyze residual stress in a weld joint based on ABAQUS software.Considering the uncertainty of welding simulation,the computation was calibrated by experimental data of contour measurement method.Both test and simulated results show that residual stresses on the surface and inside the weld zone are significantly different and present a narrow and large gradient feature in the weld joint.The peak tensile stress exceeds the yield strength of base materials inside weld,which are distinctly different from residual stress of the thin Ti-6Al-4V alloy plates presented in references before.     

Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiC_(NP) Composites Prepared by a Powder Metallurgy Route

Silicon carbide nanoparticle-reinforced nickel-based composites(Ni–Si CNP),with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy(TEM) was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening(Orowan effects) and particle strengthening(Hall–Petch effects).For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.     

Directional Growth of Tin Crystals Controlled by Combined Solute Concentration Gradient Field and Static Magnetic Field

A new method was introduced to achieve directional growth of Sn crystals. Microstructures in liquid(Pb)/liquid(Sn) diffusion couples were investigated under various static magnetic fields. Results show that the β-Sn crystals mainly reveal an irregular dendritic morphology without or with a relatively low static magnetic field(B0.3 T). When the magnetic field is increased to 0.5 T, the β-Sn dendrites close to the final stage of growth begin to show some directional character. With a further increase in the magnetic field to a higher level(0.8–5 T), the β-Sn dendrites have an enhanced directional growth character, but the dendrites show a certain deflection. As the magnetic field is increased to 12 T, the directional growth of the β-Sn dendrites in the center of the couple is severely destroyed. The mechanism of the directional growth of the β-Sn crystals and the deflection of the β-Sn crystals with the application of static magnetic field was tentatively discussed.     

电化学噪声数据处理方法概述

综述了常见的电化学噪声数据处理方法,介绍了直流趋势剔除、统计分析、快速傅立叶变换(FFT)法计算功率谱密度(PSD)以及小波变换处理电化学噪声信号的基本过程,并阐释了各种数学处理及所得参数的物理意义。