Microwave digestion polarography for determining seven trace elements in Salvia Miltiorrhiza Root and compound Salvia Miltiorrhiza Root injection simultaneously

The sensitive second derivative waves of Cu(Ⅱ),Pb(Ⅱ),Cd(Ⅱ),Ni(Ⅱ),Zn(Ⅱ),Fe(Ⅱ)and Mn(Ⅱ),forming in the substrate solution(pH=9.26)consisting of ammonia,ammonium chlorid,gelatin and ascorbic acid were researched.The peak potentials of the polarographic waves of the seven ions are at about 0.48,0.63,0.79,1.04,1.28,1.44 and 1.60 V respectively.Combining with microwave technique,a new method for the simultaneous determination of the seven trace elements in Chinese traditional medicine was developed.The method is easy to operate,rapid,simple and convenient.When the signal-to-noise rate equals 3,the detection limits of Cu,Pb,Cd,Ni,Zn,Fe and Mn are 4.2×10 3,5.3×10 3,2.1×10 3,5.8×10 4,3.0×10 3,7.7×10 4 and 1.1×10 3 μg/mL respectively.Well linear relationships exist between the concentrations and the peak currents when Cu,Pb,Cd,Ni,Zn,Fe and Mn concentrations are within 8.5×10 3 10,9.7×10 3 10,4.5×10 3 10,1.2×10 3 10,6.4×10 3 10,1.5×10 3 10 and 2.8×10 3 10 μg/mL,respectively.The method has been used to the simultaneous determination of the seven trace elements in Salvia Miltiorrhiza Root and compound Salvia Miltiorrhiza Root injection,the relative standard deviations(RSDs)of the Cu,Pb,Cd,Ni,Zn,Fe and Mn in the two medicines are 3.9% and 5.8%,4.0% and 4.1%,4.3% and 5.7%,4.9% and 5.3%,4.4% and 4.7%,3.5% and 4.0%,0.51% and 2.8%,respectively;the comparisons of the determination results with the values obtained by the standard method indicate that the presented method has very well veracity.     

Experiments and reaction characteristics of liquid phase simultaneous removal of SO<Subscript>2</Subscript> and NO

Experiments of simultaneous removal of SO₂ and NO from simulated flue gas, using NaClO₂ solution as the absorbent, were carried out in a self-designed bubble reactor, and high simultaneous removal efficiencies of SO₂ and NO were obtained under the optimal experimental conditions. The mechanism of simultaneous removal based on NaClO₂ acid solutions was proposed by analyzing the removal products. Possibility and limitation of the desulfurization and denitrification using NaClO₂ acid solutions were calculated by thermodynamic methods. Experimental results of reaction kinetics for simultaneous desulfurization and denitrification indicated that the oxidation-absorption processes of SO₂ and NO were divided into two zones, namely the fast and slow reaction zones. In the slow reaction zones both were zero order reactions, and in the fast reaction zones, the reaction order, rate constant and activation energy of SO₂ reaction with absorbent were 1.4, 1.22 (mol·L⁻¹)^−0.4·s⁻¹ and 66.25 kJ·mol⁻¹, respectively, and 2, 3.15×10³ (mol·L⁻¹) ⁻¹·s⁻¹, and 42.50 kJ·mol⁻¹ for NO reaction, respectively. Supported by the National High-Tech Research and Development Program of China (“863” Project) (Grant No. 2007AA061803)     

Optimization of efficient stable reagent of alkaline thiourea solution for gold leaching

1　INTRODUCTIONThiourea ,asanontoxic goldleachingreagentsubstitutingcyanide ,hasattractedtheinterestofmanyresearchersallovertheworldsincethedissolu tionofgoldinthioureasolutionwasfirstreportedin194 1,andaseriesofstudiesonthetheoryandtech nologyforleachinggoldbythioureahavebeencon ducted[1 3] .Mostreportson golddissolutioninthioureasolutionwereconcernedwithacidicmedia .Itwasdifficultforgoldtodissolveinalkalinesolutionbecauseofthepassivationofelementsulfurproducedbytheirreversibledecompositi…     

基于GAM的北京PM_(2.5)浓度变化的影响因素研究

为辨识与测度不同影响因子对PM_(2.5)浓度变化的作用机理,以2015年北京PM_(2.5)浓度时间演变模式为基础,建立PM_(2.5)与各大气污染物(PM_(10)、SO_2、NO_2、CO、O_3)及气象因素(日均温度、风力、风向)的GAM模型,探索不同因素对PM_(2.5)浓度变化的影响作用。结果显示:(1)北京PM_(2.5)浓度具有夏秋季低、春冬季高的时间分布特点;(2)2015年北京PM_(2.5)浓度变化与PM_(10)、SO_2、NO_2、CO大体呈线性正相关,且正相关程度由强到弱为:COPM_(10)SO_2NO_2,而与O_3、温度和风因子的关系更为复杂;(3)GAM模型的拟合优度R~2为0.725,线性回归模型的拟合优度R~2为0.519,相比较,GAM模型对PM_(2.5)浓度变化的解释度提高了20.6%。研究表明,GAM模型对于建立PM_(2.5)浓度变化与影响因素间综合性复杂关系更灵活、更可靠,优于线性回归模型。     

Influence of dioxin reduction on chemical composition of sintering exhaust gas with adding urea

With the addition of urea as an inhibitor, four groups of reducing dioxin emission experiments in sintering pot were conducted. The results show that, adding 0.05%, 0.1% and 0.5% (mass fraction) urea, the emission concentrations of dioxin are 0.287, 0.258 and 0.217 ng-TEQ/m³, respectively. The dioxin emission rates drop substantially compared to 0.777 ng-TEQ/m³ free of urea. With an increase of the urea content, the concentration of SO₂ emission reduces sharply. (NH₄)₂SO₄, formed by the reaction of SO₂ and NH₃, goes into the dust and part of NH3 is released before reaction with the emission of exhaust gas. The NO _x emission presents an increasing trend because the reaction of NH₃ and O₂ at high temperature produces NO _x . Based on the consideration of factors such as the effect of reducing dioxin emission, and the chemical composition of exhaust gas, 0.05% is the optimum adding content of urea.     

Isotope systematics and metallogenetic age of Zhuanghe gold deposit, Liaoning province, China

Based on the metallogenetic geology conditions, the H, O, C and S isotopic compositions were measured by MAT-251 mass spectrometer, and Pb isotope and Rb-Sr dating were carried with MAT-261 multi-acceptor mass spectrometer. The results show that the δ18O values of gold-bearing vein quartz from different levels are 1.19%-1.42%. The calculated δ18O values of ore fluids are 0.55%-0.78%, and δD values are from –8.64% to –6.66%. The calculated values of δ 34 SH2Sby the δ34Spy values in quartz veins display sulfur isotope compositions from -0.053% to 0.413%. Carbon isotope compositions of carbonates are from -0.612% to 0.140%. The mole ratios of 206Pb to 204Pb, 207Pb to 204Pb and 208Pb to 204Pb in auriferous quartz vein are 16.987-17.545, 15.342-15.623, and 38.254-38.744, respectively. The age of the Zhuanghe gold deposit determined by Rb-Sr isochron of the fluid inclusions in quartzes is (143.0±5.8) Ma. These isotopic data suggest that the metallogenetic fluids are generated from magmatic hydrotherm and the origin of ore-forming matters is related to the deep-derived magmatic activities. Meanwhile, the metallogenetic epoch of the Zhuanghe gold deposit is in Yanshanian period.     

Forming regularity and relation between composition and property of B2O3-BaO-ZnO glass

B2O3-BaO-ZnO glass was prepared by using conventional melt quenching technology. The forming regularity and the relationship between the composition and the property of B2O3-BaO-ZnO glass were investigated. The results show that the composition range for forming B2O3-BaO-ZnO glass is very wide, but the content of B2O3 has a limit within mole fraction of 25%-75%. When the content of B2O3 is over the limit, the melt will be divided into two phases with different compositions and structures, whereas too low content of B2O3 will result in the crystallization of the melt during the cooling process. The thermal expansion coefficient, the transition temperature and the resistivity of the glass at room temperature are (5-10)×10-6 ℃-1, 480-620 ℃ and (1.5-3.0)×1010 Ω·m, respectively.     

磁西煤系下岩溶热水水文地球化学特征及成因

根据水质分析结果,并结合岩溶地下水水质资料,分析了磁西煤田一号采区的深层岩溶热水水文地球化学特征、热储特征及其成因。结果表明,磁西煤田煤系下具有高TDS、高硬度、S04Cl-CaNa型水质特征的深层岩溶温热水是地下水沿断裂构造参与深部循环、长期演化的结果;地热异常属于热水型地热,热储温度可达60℃以上,循环深度在1500m以上,热源来自于燕山期岩浆侵入岩体产生的热异常与区域地温的叠加。本研究同时也为地热资源研究、煤田开发、矿井热害和矿井水防治提供有意义的参考。     

Study on the isothermal oxidation behavior in air of Ti3AlC2 sintered by hot pressing

The isothermal oxidation behavior at 900–1300°C for 20 h in air of bulk Ti₃AlC₂ with 2.8 wt% TiC sintered by means of hot pressing was investigated in the work. The isothermal oxidation behavior generally followed a parabolic rate law. The parabolic rate constants increased from 1.39×10⁻¹⁰ kg²·m⁻⁴·s⁻¹ at 900°C to 5.56×10⁻⁹ kg²·m⁻⁴·s⁻¹ at 1300°C. The calculated activation energy was 136.45 kJ/mol. It was demonstrated that Ti₃AlC₂ had excellent oxidation resistance due to the continuous, dense and adhesive protect scales consisted of a mass of α-Al₂O₃ and a little of TiO₂ and/or Al₂TiO₅. In principle, the oxide scale was grown by the inward diffusion of O²⁻ and the outward diffusion of Ti⁴⁺ and Al³⁺. The rapid outward diffusion of cations usually resulted in the formation of cracks, gaps, and holes.     

Electrical conductivity of （Na3AlF6-40%K3AlF6）-AlF3-Al2O3 melts

The effects of contents of AlF3 and Al2O3, and temperature on electrical conductivity of （Na3AlF6-40%K3AlF6）- AlF3-Al2O3 were studied by continuously varying cell censtant （CVCC） technique. The results show that the conductivities of melts increase with the increase of temperature, but by different extents. Every increasing 10 ℃ results in an increase of 1.85 × 10^-2, 1.86× 10^-2, 1.89 × 10^-2 and 2.20 × 10^-2 S/cm in conductivity for the （Na3AlF6-40%K3AlF6）-AlF3 melts containing 0%, 20%, 24%, and 30% AlF3, respectively. An increase of every 10 ℃ in temperature results an increase about 1.89× 10^-2, 1.94 × 10^-2, 1.95 × 10^-2, 1.99× 10^-2 and 2.10× 10^-2 S/cm for （Na3AlF6-40%K3AlF6）-AlF3-Al2O3 melts containing 0%, 1%, 2%, 3% and 4% Al2O3, respectively. The activation energy of conductance was calculated based on Arrhenius equation. Every increasing 1% of AlF3 results in a decrease of 0.019 and 0.020 S/cm in conductivity for （Na3AlF6-40%K3AlF6）-AlF3 melts at 900 and 1 000 ℃, respectively. Every increase of 1% Al2O3 results in a decrease of 0.07 S/cm in conductivity for （Na3AlF6-40%K3AlF6）-AlF3-Al2O3 melts. The activation energy of conductance increases with the increase in content of AlF3 and Al2O3.     

Synthesis and characterization of arsenate antimonic acid AAAc(1 : 1)

The AAAc(1 : 1) was synthesized in water by As₂O₃ and Sb₂O₃ with molar ratio of 1 : 1. AAAc(1 : 1) was characterized by Raman, IR, TG/DTG, DSC, XPS and XRD. The results show that there are four peaks to v _s of As-OH, As-O-Sb, Sb-OH and Sb-O-Sb in Raman spectra of AAAc(1 : 1) at 100 – 1 000 cm⁻¹. The solution of AAAc(1 : 1) was also titrated with KOH solution. The titration results show that AAAc(1 : 1) is a hexabasic acid with dissociation constants of k ₁=3.62 × 10⁻², k ₂=3.05 × 10⁻³, k ₃=6.43 × 10⁻⁶, k ₄ =9.78 × 10⁻⁸, k ₅=1.32 × 10⁻¹¹, k ₆=3.87 × 10⁻¹². AAAc(1 : 1) has a good solubility and stability in water, its solid obtained by free volatilizing water from its solution under air at ambient temperature is amorphous. Chemical and thermal analysis show that the composition of AAAc(1 : 1) is As₂O₅ · Sb₂O₅ · 8H₂O in air at 25 °C. AAAc(1 : 1) has the structure of AsO(OH)₂-OH-Sb(OH)₄-O-Sb(OH)₄-OH-AsO(OH)₂ or As(OH)₃-O-Sb(OH)₄-O-Sb(OH)₄-O-As(OH)₃ (isomerism) through experimental determination and geometry optimization. Foundation item: Project(50274075) supported by the National Natural Science Foundation of China     

Technology of black coloring for stainless steel by electrochemical method

The technology of black coloring for stainless steel by electrochemical method was studied. The optimum bath compositions and operating conditions were obtained as follows. 40 - 50 g/L K2Cr2O7, 15 - 20 g/L MnSO4, 15 -20 g/L （NH4）2SO4, 20 -40 g/L H3BO3, 20 -30 g/L additive A, 2 g/L （NH4）6Mo7O24 ; time 9 -20 min; temperature 15 - 30 ℃ ; potential 3 V and current density 1 - 2 mA/cm^2. The effects of the compositions of the bath on the quality of black colored film were discussed. The influences of passivation process on the black coloring velocity and performances of black colored film layer were investigated. The results show that the passivation process can improve the corrosion resistance and the stability to bear color-change; （NH4）2 SO4 can control the black coloring velocity and prolong black coloring bath life remarkably; and additive A can improve the evenness and compactness of black colored film layer. The results of scanning electron microscopy and energy dispersive spectra show that the microstructure is of cylindrical lump, the filling process can decrease the crackles, and the main elements of black colored film are Fe, Cr, Mn and Ni.     

华南沿海城市PM2.5污染特征及来源解析

基于2017年12月25日至2018年1月16日1 h时间分辨率的在线监测数据,对华南沿海城市——阳江市的大气PM_2.5质量浓度、化学组分和来源进行了分析．结果表明,采样时段阳江市PM_2.5中主要化学组分为OM、NO₃^-、SO₄^2-、NH₄⁺和EC,质量浓度占比分别为32.75%、25.59%、16.41%、12.37%和4.82%．相比清洁过程,两次污染过程期间NO₃^-质量浓度均为清洁过程时段的6倍以上,增量明显高于其他组分,占比则均为清洁过程时段的2倍以上,分别占29.38%和30.81%.PMF解析结果表明,二次转化源是最主要的源,其分担率高达51.41%,其中NO_x二次转化源分担27.18%,是阳江市PM_2.5分担率最大的二次转化源．首要的一次排放源是机动车源(15.11%)．污染过程期间NOx二次转化源的分担率显著提...     

Spectra and DNA-binding properties of two novel mixed-ligand complexes containing organosulfonate

Two novel mixed-ligand complexes, [M(phen)₂(ans)₂]·H₂O (M = Cd(II) 1, Zn(II) 2; phen is 1, 10-phenanthroline, and ans is 4-aminonaphthalene-1-sulfonate), were obtained from the reaction of 1, 10-phenanthroline, sodium 4-aminonaphthalene-1-sulfonate tetrahydrate and acetate in mixed solvents. Interaction of the complexes with calf thymus DNA (ctDNA) were investigated using UV-vis absorption spectra, luminescence titrations, steady-state emission quenching by [Fe(CN)₆]⁴⁻, DNA competitive binding with ethidium bromide (EB) and viscosity measurements. The experimental results indicate that there exist two interaction modes between the complexes and DNA, namely the electrostatic interaction and intercalation, with the binding constants of 1.82 × 10⁵ M⁻¹ for 1 and 4.78 × 10⁴ M⁻¹ for 2 in buffer of 50 mM NaCl and 5 mM Tris-HCl (pH 7.0). Funded by Key Project of the National Natural Science Foundation of China (No. 60537050)     

Preparation and characteristics of Cu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/MgF<Subscript>2</Subscript>/Au tunnel junction

The fabrication process of Cu/Al₂O₃/MgF₂/Au double-barrier metal/insulator/metal junction (DMIMJ) was introduced, and more stable light emission from this junction was successfully observed. The light emission physical mechanism of the junction was discussed. Results show that light emission spectrum of this structure locates at wavelength of 250–700 nm with two peaks at around 460 nm and 640 nm, which moves towards shorter wavelength region in comparison with that of the Al/Al₂O₃/Au junction. The light emission efficiency of this junction ranges from 0.7×10⁻⁵–2.0×10⁻⁵, which is 1 to 2 orders higher than that of the single-barrier Al/Al₂O₃/Au junction. The improved properties of this structure should be due to the electrons resonant tunneling effect in the double-barrier.     

Temperature dependence on reaction of CaCO3 and SO2 in O2/CO2 coal combustion

The temperature dependence on the reaction of desulfurization reagent CaCO₃ and SO₂ in O₂/CO₂ coal combustion was investigated by thermogravimetric analysis, X-ray diffraction measurement and pore structure analysis. The results show that the conversion of the reaction of CaCO₃ and SO₂ in air is higher at 500–1 100 °C and lower at 1 200 °C compared with that in O₂/CO₂ atmosphere. The conversion can be increased by increasing the concentration of SO₂, which causes the inhibition of CaSO₄ decomposition and shifting of the reaction equilibrium toward the products. XRD analysis of the product shows that the reaction mechanism of CaCO₃ and SO₂ differs with temperature in O₂/CO₂ atmosphere, i.e. CaCO₃ directly reacts with SO₂ at 500 °C and CaO from CaCO₃ decomposition reacts with SO₂ at 1 000 °C. The pore analysis of the products indicates that the maximum specific surface area of the products accounts for the highest conversion at 1 100 °C in O₂/CO₂ atmosphere. The results reveal that the effect of the atmosphere on the conversion is temperature dependence.     

Structural and Dielectric Properties of Ba5RNiNb9O30 （R = La, Nd and Sm） ceramics

1 IntroductionSince the discovery of ferroelectricity and relatedproperties in BaTiO3,a large amount of research work onoxidesin search of novel materials for industrial applica-tions ,has been done .High performance dielectric ceram-ics are applied as key materials for resonators , discreteand multiplayer (MLC) capacitors ,andtemperature com-pensating capacitors . Some ferroelectric oxides are alsovery important due to the rapid progress in microwavetelecommunications ,satellite broadcastin…     

Superplastic Deformation Behavior of Hot-rolled AZ31 Magnesium Alloy Sheet at Elevated Temperatures

1IntroductionAs a typical wrought magnesiumalloy,AZ31alloyhas a wide prospect for applications inthe fields of auto-mobiles,electronic appliances and aeronautic facili-ties[1,2].However,due to the hexagonal close-packed(HCP)structure of magnesium,the ductility of AZ31al-loy at roomtemperature is rather poor,which greatly re-stricts its applications in structural fields[3-5].Owing tothe activation of non-basal slip system[6],the ductility ofMg alloycan be significantlyimproved at elevatedtem…     

Sintering and Electronic Conducting Properties of Lao.7Ca0.3CrO3 Perovskite Synthesized by a Glycine-nitrate Process

La0.7 Ca0.3 CrO3 powder consisting of superfine and uniform particles （ 100-200 nm ） were synthesized using a glycine-nitrate process （ GNP ）. The sintering and electronic conducting properties of La0.7 Ca0.3 CrO3 were invetigated in the sintering temperature range of 1 200-1 450 ℃. The desired morphology of the powder significantly improved its sinterability. La0.7 Ca0.3 CrO3 ceramics sintered at 1 250-1 450 ℃ show high relative densities above 95 % . The ceramics sintered at 1 250-1 400 ℃ have very similar electronic conduct- ing properties, providing electronic conductivities around 55 Ω^-1 cm^-1 at a measuring temperature of 800 ℃ . Further increasing the sintering temperature to 1450 ℃ led to an apparent degradation of electronic conducting properties. This research demonstrates the advantage of the GNP in producing La0.7 Ca0.3 CrO3 with respect to the enhanced sintering properties and superior electronic conducting properties.     

Microstructure and microwave dielectric properties of CaO-B2O3-SiO2 glass ceramics with various B2O3 contents

The effects of B2O3 addition on both the sintering behavior and microwave dielectric properties of CaO-B2O3-SiO2 (CBS) glass ceramics were investigated by Fourier transform infrared spectroscopy (FTIR),X-ray diffractometry (XRD) and scanning electron microscopy (SEM).The results show that the increasing amount of B2O3 causes the increase of the contents of [BO3],[BO4] and [SiO4],which deduces the increase of CaB2O4 and α-SiO2 and the decrease of CaSiO3 correspondingly.No new phase is observed throughout the...