The use of osteotomes for sinus augmentation at the time of implant placement

The placement of endosseous dental implants is often hampered by the loss of alveolar bone. In the posterior maxilla, the presence of the maxillary sinus and less-dense bone present additional obstacles to successful implant placement. Existing methods of subantral augmentation require extensive surgical manipulation, often including a second surgical site for harvesting autogenous bone. The development of surgical osteotomes has facilitated the placement of implants in areas of minimal alveolar bone height in the posterior maxilla. This article describes the osteotome technique for sinus augmentation at the time of implant placement and presents a short-term evaluation of 34 implants placed in 18 patients.     

Use of X-ray diffraction for studying the temperature dependence of the Young modulus of protein crystals

Conventionally, for dental reconstruction after bone grafting of the congenital residual alveolar cleft, a fixed prosthesis or removable partial denture is used. In this paper, residual alveolar cleft reconstruction with an osseointegrated implant following secondary bone grafting is described. The patient underwent secondary bone grafting of the residual alveolar cleft at the age of 18 years. One osseointegrated implant was placed in the bone bridge 8 months after bone grafting. No problems up to 1 year after the fabrication and placement of the fixed prosthesis have been observed.     

Local delivery of an amino bisphosphonate prevents the resorptive phase of alveolar bone following mucoperiosteal flap surgery in rats

Mucoperiosteal flaps are used to access the bone and root surface in a wide range of periodontal procedures and in implant surgery. We have demonstrated that the mucoperiosteal surgical flap of the rat mandible produces a transient burst of alveolar bone resorption similar to the clinical observations in humans. This resorptive activity, when coupled with local irritation factors, may cause confined alveolar bone loss. Recently, we have demonstrated that an amino bisphosphonate, which is used in preventing systemic bone resorption in osteoporosis and other bone diseases, reduces alveolar bone resorption in the rat model when administered systemically. In this study we evaluated the effect of local delivery of the amino bisphosphonate on bone resorption associated with mucoperiosteal flaps. Following mucoperiosteal flap elevation in the premolar and molar region of the rat mandible, a surgical pellet soaked with amino bisphosphonate was locally applied on the exposed bone surface and covered by flap. The results show that local delivery of amino bisphosphonate reduces significantly alveolar bone resorption activated by mucoperiosteal flap surgery. This study suggests that local application of amino bisphosphonate can be used as an adjunct in therapy for reducing bone resorption following surgery.     

Cloning, characterization, and chromosomal localization of human superillin (SVIL)

The specific aim of this study was to determine the response of alveolar bone after it was augmented vertically using distraction osteogenesis and subsequently loaded with implant restorations. Four dogs each had four implants placed horizontally into an edentulous mandibular quadrant and, after integration, a distraction osteogenesis device was fabricated in the laboratory. An osteotomy was made to allow the crest of the alveolar ridge to be distracted vertically. After 10 mm of vertical distraction, the device was stabilized with light cured resin. Following bone fill confirmation of the distraction gap at 10 weeks, two implants were placed into the ridges, one in distracted bone and one in nondistracted bone. After 4 months for implant integration, freestanding prostheses were fabricated. Crestal bone levels were evaluated throughout the period of function. Animals were sacrificed after 1 year of loading, for histologic evaluation of the bone. The vertical ridge augmentation averaged 8.85 +/- 1.05 mm after 10 weeks of healing following distraction, without change over 1 year of implant loading. Histologic examination showed that bone had formed between the distracted segments, creating an augmented ridge. The average thickness of the labial cortex in the distraction gap was significantly thinner than the lingual cortex in distracted bone and the lingual and labial nondistracted cortical bone. The presence of the dental implant did not significantly affect cortical bone thickness. Serial sections showed that implants remained integrated and functional without soft tissue inflammation. Dental implants placed into alveolar ridges augmented with the technique of distraction osteogenesis maintained bone and were functional for the length of this study.     

Hard-tissue augmentation for the placement of anterior dental implants

Dental implants have become a popular alternative for replacing missing teeth in every region of the oral cavity. In the anterior zone, special esthetic concerns require not only a stably anchored implant for long-term success, but also the presence of adequate hard and soft peri-implant tissues. Anterior tooth loss is often accompanied by considerable loss of alveolar bone, so augmenting hard tissue before or in combination with implant placement becomes a critical part of therapy. One of the most successful augmentation techniques is guided bone regeneration (GBR). Thus far, augmentation procedures using expanded polytetrafluoroethylene membranes (ePTFEa) have proved to be the most efficient and predictable surgical technique to enhance deficient bone sites. This article discusses some critical biological and clinical/technical aspects of GBR and describes techniques for anterior hard-tissue augmentation with the photographic documentations of three clinical cases.     

Reconstruction of residual alveolar cleft defects with one-stage mandibular bone grafts and osseointegrated implants

PURPOSE: This study evaluates a treatment regimen for reconstruction of residual maxillary alveolar cleft defects consisting of mandibular bone grafting and immediate implant installation. PATIENTS AND METHODS: Sixteen cleft patients (five female and 11 male) had residual cleft defects of the alveolar ridge reconstructed with bone grafts from the mandibular symphyseal region. The bone graft was pretapped at the donor site before fixation in the residual ridge with Br?nemark implants. Twenty implants were installed according to this concept. The period of observation ranged from 36 to 69 months, with a mean of 48 months after implant installation. RESULTS: Five patients developed wound dehiscenses that resulted in total or partial bone graft sequestration. Two implants were lost, one due to sequestration and the other due to mobility at the abutment procedure; 18 implants were still well functioning at the end of the observation period. However, all patients showed significant periimplant bone resorption after this one-stage treatment. CONCLUSION: Because of the observed complication rate, the one-stage procedure may not be optimal for reconstructing residual cleft defects.     

Tripodal mandibular subperiosteal implant: basic sciences, operational procedures, and clinical data

A tripodal mandibular subperiosteal dental implant is a three piece cast metal framework that fits on the residual ridge beneath the periosteum and provides support for a dental prosthesis by means of posts or other mechanisms protruding through the oral mucosa. This implant is indicated in patients with advanced atrophy of the mandible where the unstable alveolar bone has completely disappeared, leaving in place the more stable basal bone with specific anatomical contours. The authors present their experience of 317 cases carried out in three different centers related to this implant modality and underline the importance of the basic anatomic, physiologic, and medical knowledge required to optimize the results.     

Clinical and histologic evaluation of an active "implant periapical lesion": a case report

A new entity called "implant periapical lesion" has recently been described. This lesion could be the result of, for example, bone overheating, implant overloading, presence of a preexisting infection or residual root fragments and foreign bodies in the bone, contamination of the implant, or implant placement in an infected maxillary sinus. This case report describes a titanium implant that was placed in the maxillary premolar region. A fenestration involving the middle portion of the implant was present. After 7 months, the apical portion of the implant showed radiolucency. This lesion rapidly increased in size and a vestibular fistula appeared. A systemic course of antibiotics was not successful, and the implant was then removed. The histologic examination showed the presence of necrotic bone inside the antirotational hole of the implant. The etiology of the implant failure in this instance could possibly be related to bone overheating associated with an excessive tightening of the implant and compression of the bone chips inside the apical hole, producing subsequent necrosis.     

An evaluation of measures of synonymous codon usage bias

OBJECTIVE: The aim of this study was to determine whether bone quality, as assessed by osteometry and histologic parameters, can be used to predict implant integration in conjunction with maxillary sinus reconstruction. STUDY DESIGN: Twelve patients with severely atrophied maxillary alveolar processes were treated through use of a two-stage surgical reconstructive strategy with implant placement 4 months after bone grafting. Bone biopsy specimens taken from the iliac crest peroperatively and from the sinus inlay sites 1, 2, 4, 6, or 12 months postoperatively were analyzed by light microscopy and osteomorphometry. Bone mineral content was measured by osteometry. RESULTS: Osteometric and osteomorphometric data (trabecular bone volume [%], assessment of chromatin staining, and an osteocyte index) registered for the biopsy specimens were not statistically correlated with implant failure. CONCLUSIONS: Prognostic evaluation of implant survival is difficult. The tested methods did not contribute to the improvement of guidelines for the clinical handling of these patients.     

Guided tissue regeneration without a stage 2 surgical procedure

In the two cases described, the problems of insufficient bone and insufficient soft tissue in the edentulous ridge were addressed concurrently. Freeze-dried demineralized bone was used to fill the osseous defect. Freeze-dried fascia lata was used to prevent epithelial migration into the defect, act as a barrier, and eliminate a second surgery for membrane removal. This regeneration procedure can provide increased alveolar bone for better implant placement and esthetics.     

Psychotherapy with a boy with depression following the death of his 2 brothers

The purpose of this study was to evaluate the relationship of alveolar bone morphology to tooth shape and form. 111 dry skulls were evaluated at Baylor College of Dentistry (Dallas, Texas). The skulls were arbitrarily divided into flat, scalloped and pronounced scalloped anatomic profiles according to alveolar bone anatomy. The number of buccal dehiscences and fenestrations was determined for each skull according to their anatomic morphotype. 10 skulls from each group were selected for bone height measurements. The measurements were made with a periodontal probe and ruler from the height of the interproximal bone to the buccal alveolar crest. Kodachrome slides were used to measure mesial-distal tooth width and length from ten skulls from each anatomic category. The average number of fenestrations for each group was 3.5. The mean number of dehiscences for flat and scalloped skulls was 0.5. The average number of dehiscences for pronounced scalloped was 1.2. There were no significant differences when the groups were compared. The mean distance from the height of the interdental bone to the alveolar crest was statistically significant when the groups were compared (flat 2.1 mm, scalloped 2.8 mm, pronounced 4.1 mm) (Tukey, p = 0.05). There were no significant differences when tooth shapes were compared with bone anatomy. Pronounced scalloped anatomic profiles were slightly narrower when compared with the other groups. The observations reported have treatment ramifications when patients with scalloped or pronounced scalloped morphotypes are being considered for dental implant placement.     

Nasal lavage as tool for health effect assessment of photochemical air pollution

In order to achieve esthetically more satisfying results, it has been proposed to place ITI implants with their border between the rough and smooth surfaces below the level of the alveolar crest, thereby obtaining a submucosally located implant shoulder following healing. The aim of the present experimental study was to clinically and radiographically evaluate the tissue response to the placement of one-stage transmucosal implants with the border between the rough and the smooth surfaces sunk by 1 mm into a subcrestal location. 11 patients underwent comprehensive dental care including the placement of 2 implants of the ITI Dental Implant System in the same quadrant (test and control). Randomly assigned control implants were placed according to the manufacturer's instructions, i.e. the border between the rough titanium plasma-sprayed and the smooth polished surfaces precisely at the alveolar crest. At the test implant the apical border of the polished surface was placed approximately 1 mm below the alveolar crest. Probing bone levels were assessed at implant placement (baseline), 4 and 12 months later. Modified plaque and modified gingival indices were recorded at 1, 2, 3, 4 and 12 months. Clinical probing depth and "attachment" levels were measured at 4 and 12 months. All parameters were assessed at 6 sites around each implant. The mean for each implant was calculated and used for analysis. The Wilcoxon matched pairs signed rank test and the Student t-test were applied to detect differences over time and between the test and control implants. At baseline, a mean difference in probing bone level of -0.86 mm (SD 0.43 mm, p < 0.05) was found between test and control implants with the test implants being placed more deeply. Both test and control implants lost a significant amount of clinical bone height during the first 4 months (test 1.16 mm, p < 0.05; control 0.58 mm, p < 0.05). However, only the test implants significantly lost clinical bone height from 4-12 months (test 1.04 mm, p < 0.05; control 0.45 mm, p = 0.08). Overall, the test implants lost 2.26 mm and the control implants 1.02 mm of bone height during the first year of service. On the average, the test implants demonstrated a bone level of 0.38 mm lower than the controls at 12 months. Except for the modified gingival index at 4 months (mean difference 0.21, SD 0.19, p < 0.05), no clinical parameters yielded significant differences between test and control implants at any time. It is concluded that in addition to the crestal bone resorption occurring at implants placed under standard conditions, the bone adjacent to the polished surface of more deeply placed ITI implants is also lost over time. From a biological point of view, the placement of the border between the rough and the smooth surfaces into a subcrestal location should not be recommended.     

Molecular basis for cardiac functions

The cause of mechanical failure of the fixture component of an osseointegrated dental implant was investigated. The surfaces of five clinical specimens that had fractured were compared to those of new specimens fractured in the laboratory under monotonic and cyclic loads. Scanning electron microscopy revealed striations on the fractured surfaces of the clinical specimens, similar to striations on the laboratory-fatigued specimens and in contrast to the dimpled surfaces on the overloaded specimens. The investigation demonstrated that fractures of the fixture component of this dental implant occurred by fatigue under physiologic loads, with marginal alveolar bone loss around the fixture.     

Quantitative histologic evaluation of LTI carbon, carbon-coated aluminum oxide and uncoated aluminum oxide dental implants

The response of mandibular bone to identical geometry LTI carbon, carbon-coated aluminum oxide, and uncoated aluminum oxide blade-type dental implants in baboons for 2 years was evaluated using histologic, microradiographic, and scanning electron microscopic methods. In addition, a quantitative histologic analysis was performed identifying the type, amount, and distribution of tissue surrounding the dental implant systems. This is the final phase of a study investigating the effect of implant elastic modulus and implant surface chemical composition on the performance of dental implants. Previous studies have utilized clinical and radiographic evaluations, postretrieval mechanical testing, and finite element stress analysis to evaluate the dental implant performance. The results of the histologic study revealed a direct implant-bone interface with no intervening soft tissue in 16 of the 21 implants (76%). A fibrous tissue interface was observed in 5 of 21 implants (24%). Quantitative histologic results for the implants with a direct implant-bone interface showed statistically larger crestal cortical plates (p less than 0.05) and greater area fraction crestal cancellous bone (p less than 0.05) in the LTI carbon implant compared to the carbon-coated and uncoated aluminum oxide implants. The carbon-coated and uncoated aluminum oxide implants demonstrated statistically greater area fraction cancellous bone at the inferior region of the implant (p less than 0.05) and thinned and reduced crestal cortical plates when compared to the LTI carbon implants. The results indicate that significant stress shielding of the crestal bone had occurred with the rigid carbon-coated and uncoated aluminum oxide implants when compared to the LTI carbon implants which had a material elastic modulus similar to cortical bone. Based upon the histologic results, it appears that the LTI carbon implants with the direct implant-bone interface exhibited a greater potential for long-term successful performance compared to the aluminum oxide substrate implants.     

Bone grafting at the stage of mixed and permanent dentition in patients with clefts of the lip and primary palate

Secondary bone grafting of a residual alveolar cleft has become a well established procedure. However, little attention has been paid to the benefits of these bone grafts in patients with clefts of the lip and alveolus only. This retrospective and comparative study includes 21 patients who had received a secondary or a late secondary bone grafting procedure from tibia and whose mean clinical and radiographic follow-up after the bone graft was 5.5 years. Eighteen patients treated without bone grafting served as controls. Length and width of cleft, presence or absence of permanent lateral incisor, size of nasal floor bony defect, and interdental alveolar bony height in the cleft area were investigated. The results showed that bone grafting was indicated particularly in wide clefts with missing lateral incisors. Eruption of a tooth close to the cleft was facilitated and the bony support for teeth neighboring the cleft was improved. In some cases, additional support of the alar base of the nose was achieved and closure of an oronasal fistula facilitated. A further advantage of bone grafting of clefts of the primary palate was that it might make it possible to insert a titanium implant carrying an artificial tooth in the cleft area.     

Infectious complications after OKT3 induction in liver transplantation

TEN PATIENTS WHO REQUIRED two or more anterior teeth extractions were utilized in this study. Extraction procedures were carried out with a full thickness surgical flap approach. After flap reflection, teeth were removed with a minimum of trauma to the surrounding bone. Following extraction silicone-based impression techniques were used to produce a model of the alveolar process and small metal pins were placed in the alveolus to be used as fixed points to make measurements of ridge dimensions. One socket was covered with an expanded polytetrafluoroethylene (ePTFE) barrier membrane (experimental site); the other socket was a conventional control. The soft tissue flaps were then mobilized using periosteal releasing incision and the wound closed with ePTFE mattress sutures. Six months following extraction, patients were treated with flap surgery to expose both extractions sites to remove the ePTFE membranes and to measure ridge dimensions using the pins as fixed points. Clinical and model measurements have shown statistically significant better ridge dimensions at experimental sites than at control (P < or = 0.05). Three patients with exposed membranes had similar dimensional changes as controls. Results from this study suggested that this improved technique offers a predictable alveolar ridge maintenance enhancing the bone quality for dental implant procedures and esthetic restorative dentistry.     

Sharpey fiber bone development in surgically implanted dog mandible. A scanning electron-microscopic study

Ticonium metal implant placed surgically in the previously edentulatized adult dog mandible induced the formation of an extensive Sharpey fiber system. Sharpey's fibers extended from the peri-implant area, deep into alveolar bone. The frequency of Sharpey's fibers and the degree of their mineralization varied from scattered location and unmineralized state to heavy clustering and full mineralization. This study suggests that the formation of Sharpey's fibers and the degree of their mineralization are determined by biophysical forces of pressure received at a given site.     

Calculus deposits and bone loss on the teeth of Romano-British and eighteenth-century Londoners

The relation between dental calculus and periodontal disease is not clear but it is generally recognized that calculus is a significant pathogenetic factor. Skeletal material has previously been used to study some aspects of chronic adult periodontitis but few studies have quantified the extent of calculus in ancient populations and its relation to changes in alveolar bone height. This study records the presence and extent of calculus and its relation to alveolar bone loss in a Romano-British and eighteenth-century London population. There were significant differences in calculus deposition in the two populations but this appeared to have little effect on changes in alveolar bone contour. It is suggested that the amount of calculus may be related to diet but that changes in alveolar bone height seem to be independently controlled.     

Preimplant guided bone regeneration in the anterior maxilla

Guided bone regeneration is a clinical procedure aimed at promoting bone formation at sites where there is severe bone loss. The purpose of this article was to demonstrate reconstruction of deformations of the alveolar process resulting from traumatic injuries to maxillary incisor teeth by guided bone regeneration procedures followed by insertion of dental implants. In both cases, submembranous space-making was stabilized by human demineralized freeze-dried bone. Implant insertion at the sites of bone augmentation resulted in successful restorations. Histologic examination of biopsy samples from the submembranous hard tissue revealed particles of demineralized freeze-dried bone allografts partially surrounded by uninflamed connective tissue and by vital bone adjacent and adhered to the demineralized freeze-dried bone allograft particles.     

Long-term evaluation of the use of coralline hydroxyapatite in orthognathic surgery

PURPOSE: This prospective study was designed to evaluate the long-term clinical and radiographic results of porous block hydroxyapatite (PBHA) used as a synthetic bone graft in orthognathic surgery and craniofacial augmentation. PATIENTS AND MATERIALS: A total of 245 consecutive patients were treated initially. Inclusion criteria for this study included a minimum clinical and radiographic follow-up of 5 years. In addition, all patients with known implant failures were included regardless of whether they met the study criteria. There were 111 patients that met the criteria for inclusion in this study. All patients had undergone orthognathic surgery with rigid fixation and had had inlay or onlay PBHA implants placed. Ninety-six percent of the implants were placed through an intraoral approach. Long-term postoperative radiographs were visually compared with immediate postoperative radiographs for implant position, stability, resorption, and other significant radiographic changes. The clinical examination evaluated for signs and symptoms of infection, wound dehiscence, implant exposure, implant displacement, changes in the overlying mucosa, and development of oronasal or oroantral fistulae. RESULTS: Four hundred seventy-one implants were placed: 403 in the maxilla, 44 in the mandible, and 24 in the periorbital region. There were 289 implants placed in direct communication with the maxillary sinus. The average follow-up time was 7.2 years (range, 5.0 to 10.3 years). Twenty-three implants (4.9%) were removed during the evaluation period. Lateral maxillary wall grafting had 95.7% success, with nine implants being lost in three patients. One chin implant was removed because of dissatisfaction with the aesthetics. Seven (14%) midpalatal implants used for maxillary expansion were lost, primarily because of exposure of the implant to the oral or nasal cavity at the time of surgery. When PBHA was used for alveolar cleft grafting, there was a 100% failure rate. CONCLUSION: The use of PBHA as a bone graft substitute in orthognathic surgery and for facial augmentation showed a high percentage of success and efficacy. However, adequate soft tissue coverage in the nasal floor and on the palate are paramount for success of midpalatal implants. PBHA should not be used for alveolar cleft grafting. Rigid fixation for inlay implants in the maxilla is important to provide stress shielding of the material and minimize micromovement during the initial healing phase.