共查询到20条相似文献,搜索用时 78 毫秒
1.
Transverse Cracking of Concrete Bridge Decks: State-of-the-Art 总被引:2,自引:0,他引:2
This state-of-the-art paper presents the results of a comprehensive literature review of the cause of transverse deck cracking. It includes compilation of experimental and analytical research results as well as survey studies on the effects of different factors on concrete deck cracking. Consistent with the past work on the subject, causes of transverse deck cracking are classified under three categories, namely: (1) material and mix design, (2) construction practices and ambient condition factors, and (3) structural design factors. The literature review revealed that the first two items have been studied extensively over the past several decades, while literature is limited on the effect of structural design factors on deck cracking. This paper evaluates the existing work in depth and presents recommendations on mix design and construction procedures to reduce the potential for transverse deck cracking. Furthermore, areas for additional research are identified. 相似文献
2.
The AASHTO LRFD load distribution factor equation was developed based on elastic finite element analysis considering only primary members, i.e., the effects of secondary elements such as lateral bracing and parapets were not considered. Meanwhile, many bridges have been identified as having significant cracking in the concrete deck. Even though deck cracking is a well-known phenomenon, the significance of pre-existing cracks on the live load distribution has not yet been assessed. The purpose of this research is to investigate the effect of secondary elements and deck cracking on the lateral load distribution of girder bridges. First, secondary elements such as diaphragms and parapets were modeled using the finite element method, and the calculated load distribution factors were compared with the code-specified values. Second, the effects of typical deck cracking and crack types that have a major effect on load distribution were identified through a number of nonlinear finite element analyses. It was established that the presence of secondary elements may produce load distribution factors up to 40% lower than the AASHTO LRFD values. Longitudinal cracking was found to increase the load distribution factor by up to 17% when compared to the LRFD value while the transverse cracking was found to not significantly influence the transverse distribution of moment. 相似文献
3.
Jonathan P. Moses Kent A. Harries Christopher J. Earls Wahyu Yulismana 《Canadian Metallurgical Quarterly》2006,11(4):401-409
Glass fiber-reinforced polymer (GFRP) bridge deck systems offer an attractive alternative to concrete decks, particularly for bridge rehabilitation projects. Current design practice treats GFRP deck systems in a manner similar to concrete decks, but the results of this study indicate that this approach may lead to nonconservative bridge girder designs. Results from a number of in situ load tests of three steel girder bridges having the same GFRP deck system are used to determine the degree of composite action that may be developed and the transverse distribution of wheel loads that may be assumed for such structures. Results from this work indicate that appropriately conservative design values may be found by assuming no composite action between a GFRP deck and steel girder and using the lever rule to determine transverse load distribution. Additionally, when used to replace an existing concrete deck, the lighter GFRP deck will likely result in lower total stresses in the supporting girders, although, due to the decreased effective width and increased distribution factors, the live-load-induced stress range is likely to be increased. Thus, existing fatigue-prone details may become a concern and require additional attention in design. 相似文献
4.
This paper focuses on the behavior of skewed concrete bridge decks on steel superstructure subjected to truck wheel loads. It was initiated to meet the need for investigating the role of truck loads in observed skewed deck cracking, which may interest bridge owners and engineers. Finite-element analysis was performed for typical skewed concrete decks, verified using in?situ deck strain measurement during load testing of a bridge skewed at 49.1°. The analysis results show that service truck loads induce low strains/stresses in the decks, unlikely to initiate concrete cracking alone. Nevertheless, repeated truck wheel load application may cause cracks to become wider, longer, and more visible. The local effect of wheel load significantly contributes to the total strain/stress response, and the global effect may be negligible or significant, depending on the location. The current design approach estimates the local effect but ignores the global effect. It therefore does not model the situation satisfactorily. In addition, total strain/stress effects due to truck load increase slightly because of skew angle. 相似文献
5.
The presence of cracks in bridge decks that are reinforced with epoxy-coated reinforcing (ECR) bars has raised some concerns among bridge and maintenance engineers in the state of Iowa. To study the effects of deck cracking on the performance of ECR bars, several concrete cores that contained reinforcing bars were collected from 80 bridges that are located in different counties throughout the state of Iowa. These samples were collected from cracked and uncracked areas of the bridge decks. Concrete powder samples were collected from these cores and were analyzed in the laboratory to determine the diffusion of the chloride in the bridge decks. This study revealed that no sign of corrosion was detected for the ECR rebars that were taken at the uncracked bridge deck locations. In addition, no delamination or spalling was observed for the bridge decks where bars in the core samples, which were taken at the cracked bridge deck locations, exhibited signs of corrosion. The collected ECR rebars samples were rated according to the degree of the corrosion that was observed on each bar. These ratings were used to develop condition/age relationships that were utilized to estimate the functional service life of bridge decks that are reinforced with ECR bars. 相似文献
6.
Thomas J. Mander John B. Mander Monique Hite Head 《Canadian Metallurgical Quarterly》2011,16(1):12-20
Full-depth precast deck slab cantilevers also referred to as full-depth precast concrete bridge deck overhang panels are becoming increasingly popular in concrete bridge deck construction. To date, no simple theory is able to estimate the overhang capacity of full-depth concrete bridge deck slabs accurately. Observations suggest that interaction between flexure and shear is likely to occur as neither alone provides an accurate estimate of the load-carrying capacity. Therefore, modified yield line theory is presented in this paper, which accounts for the development length of the mild steel reinforcing to reach yield strength. Failure of the full-depth panels is influenced by the presence of the partial-depth transverse panel-to-panel seam. When applying a load on the edge of the seam, the loaded panel fails under flexure while the seam fails in shear. Through the use of the modified yield line theory coupled with a panel-to-panel shear interaction, analytical predictions are accurate within 1–6% of experimental results for critical cases. 相似文献
7.
Devin K. Harris Tommy Cousins Elisa D. Sotelino Thomas M. Murray 《Canadian Metallurgical Quarterly》2010,15(6):684-694
The sandwich plate system (SPS) is a relatively new bridge deck system that consists of steel face plates bonded to a rigid polyurethane core. The decks are thin, lightweight, and modular in design and can be tailored to numerous applications. This system provides an excellent alternative for the rapid construction and rehabilitation of bridge decks. With any new system, there exists some uncertainty in the design procedures as a result of the limited population for comparison. This paper presents the results of a finite-element parametric investigation of the lateral load distribution characteristics of SPS bridges. The parametric study primarily focuses on the influence of deck thickness on distribution behavior as compared to conventional reinforced concrete decks. Results from the study demonstrate that the inherent flexibility of a thin SPS deck yields larger distribution factors (up to 20%) than a typical reinforced concrete deck, but these distribution factors can still be conservatively estimated with current AASHTO LRFD methods. Additional comparisons indicate that the distribution behavior of SPS bridges can also be estimated with the equations proposed by the NCHRP 12-62 project. 相似文献
8.
The design, technology, and construction of a small road bridge made of very high performance fiber-reinforced concrete is described in this paper. The bridge consists of precast prestressed concrete beams with a cast-in-place ordinary concrete deck. A preliminary experimental investigation was conducted to define the mix design, to establish the properties of the material and its durability, and to study the flexural behavior of the prestressed concrete beams with and without the concrete deck. The effect of steel fibers at the structural level, where there is an influence of constitutive behavior and size effects, was analyzed by testing a prestressed beam using very high performance fiber-reinforced concrete without fibers. The establishment of the structural properties of the material then allowed the design of the final section of the bridge beams and the definition of a model to justify the design rules adopted. This project represents an attempt to demonstrate the industrial feasibility of very high performance concrete structural elements manufactured with conventional raw materials and usual production techniques and to evaluate the production technology when utilizing steel fibers. 相似文献
9.
Benjamin Z. Dymond Susan E. Bowers Carin L. Roberts-Wollmann Thomas E. Cousins Andrea J. Schokker 《Canadian Metallurgical Quarterly》2009,23(6):382-390
This paper presents the results of a detailed inspection of the deck panels of the Woodrow Wilson Bridge installed in 1982. The original cast-in-place concrete deck, constructed in 1962, was replaced with full-depth lightweight precast concrete deck panels that enabled rapid construction with minimal traffic disruption. The inspection of the Woodrow Wilson deck provides valuable information about the performance of the precast concrete panels, joints, and connections after 20 years of very harsh traffic loads and environmental stressors. The deck panels performed well overall, with the only serious problems at expansion and contraction joints. All of these joints exhibited cracking and rusting. The most prevalent type of cracking appeared to be due to restrained shrinkage between the new polymer concrete, the older precast panels, and the rigid steel joints. This location is more vulnerable to cracking and leaking because there is no prestress across the joint. The multilayered corrosion protection methods used for the transverse and longitudinal post-tensioning tendons were very successful. 相似文献
10.
A common practice for the fabrication of steel orthotropic bridge decks in the United States is to use 80% partial joint penetration (PJP) groove welds between the closed ribs and deck plate. However, it is difficult to eliminate weld melt-through with the thin rib plates. Heat straightening after welding, sometimes combined with precambering, is used to meet the deck plate flatness requirement. To study the effects of both weld melt-through and distortion control measures on the fatigue resistance of the rib-to-deck plate welded joint, six full-scale two-span orthotropic deck specimens were subjected to laboratory testing. Specimens, 10 m long and 3 m wide with four closed ribs, were fabricated with and without weld melt-through and were heat straightened; three specimens were also precambered. To simulate the effect of repetitive truck traffic, each specimen was tested up to 8 million cycles. Test results showed that six cracks initiated from the weld toe outside the rib. Only one crack developed at the weld root inside the rib; this crack initiated from a location transitioning from the 80% PJP to 100% penetration weld. None of the cracks propagated through the deck plate thickness. Precambering was beneficial in fatigue resistance as two effectively precambered specimens did not experience cracking in the PJP welds. 相似文献
11.
Rasmus Walter John F. Olesen Henrik Stang Tina Vejrum 《Canadian Metallurgical Quarterly》2007,12(3):350-363
Over the past years, with increasing traffic volumes and higher wheel loads, fatigue damage in steel parts of typical orthotropic steel bridge decks has been experienced on heavily trafficked routes. A demand exists to find a durable system to increase the fatigue safety of orthotropic steel bridge decks. A solution might be to enhance the stiffness of the traditional orthotropic bridge deck by using a cement-based overlay. In this paper, an orthotropic steel bridge deck stiffened with a cement-based overlay is analyzed. The analysis is based on nonlinear fracture mechanics, and utilizes the finite-element method. The stiffness of the steel deck reinforced with an overlay depends highly on the composite action. The composite action is closely related to cracking of the overlay and interfacial cracking between the overlay and underlying steel plate (debonding). As an example, a real size structure, the Far? bridges located in Denmark, are analyzed. The steel box girders of the Far? bridges spans 80?m, and have a depth of 3.5?m, and a width of 19.5?m. The focus of the present study is the top part of the steel box girders, which is constructed as an orthotropic deck plate. Numerous factors can influence the cracking behavior of the cement-based overlay system. Both mechanical and environmental loading have to be considered, and effects such as shrinkage, temperature gradients, and traffic loading are taken into account. The performance of four overlay materials are investigated in terms of crack widths. Furthermore, the analysis shows that debonding is initiated for a certain crack width in the overlay. The load level where cracking and debonding is initiated depends on the stress-crack opening relationship of the material. 相似文献
12.
Influence of Reinforcement on the Behavior of Concrete Bridge Deck Slabs Reinforced with FRP Bars 总被引:1,自引:0,他引:1
Sherif El-Gamal Ehab El-Salakawy Brahim Benmokrane 《Canadian Metallurgical Quarterly》2007,11(5):449-458
This paper presents the results of an experimental study to investigate the role of each layer of reinforcement on the behavior of concrete bridge deck slabs reinforced with fiber-reinforced polymer (FRP) bars. Four full-scale concrete deck slabs of 3,000?mm length by 2,500?mm width and 200?mm depth were constructed and tested in the laboratory. One deck slab was reinforced with top and bottom mats of glass FRP bars. Two deck slabs had only a bottom reinforcement mat with different reinforcement ratios in the longitudinal direction, while the remaining deck slab was constructed with plain concrete without any reinforcement. The deck slabs were supported on two steel girders spaced at 2,000?mm center to center and were tested to failure under a central concentrated load. The three reinforced concrete slabs had very similar behavior and failed in punching shear mode at relatively high load levels, whereas the unreinforced slab behaved differently and failed at a very low load level. The experimental punching capacities of the reinforced slabs were compared to the theoretical predictions provided by ACI 318-05, ACI 440.1R-06, and a model proposed by the writers. The tests on the four deck slabs showed that the bottom transverse reinforcement layer has the major influence on the behavior and capacity of the tested slabs. In addition, the ACI 318-05 design method slightly overestimated the punching shear strength of the tested slabs. The ACI 440.1R-06 design method yielded very conservative predictions whereas the proposed method provided reasonable yet conservative predictions. 相似文献
13.
Thomas J. Mander Matthew D. Henley Reece M. Scott Monique Hite Head John B. Mander David Trejo 《Canadian Metallurgical Quarterly》2010,15(5):503-510
The performance of a new full-depth precast overhang panel system for concrete bridge decks is investigated experimentally. In contrast to conventional cast-in-place deck overhangs, the proposed full-depth precast overhang system has the potential to speed up construction, reduce costs, and improve safety. Load-deformation behavior up to factored design load limits is first investigated. The panel is then loaded near its edge to examine the collapse capacity and the associated failure modes—particularly the influence of panel-to-panel connections that exist, transverse to the bridge deck axis. Comparative tests are also conducted with a conventional cast-in-place overhang system. When compared to the conventional cast-in-place overhang behavior, the experimental results show that the precast full-depth overhang introduces different behavior modes, largely due to the influence of the partial depth panel-to-panel connection, which reduces the capacity by some 13%. 相似文献
14.
Pontesei Dam is a major concrete dam built after World War II across the canyon of Maè Creek (Valle di Zoldo) in the Italian Eastern Alps. Just upstream from the dam, a gully discharges water from steep mountains. The only road serving the dam and the entire valley upstream of the dam runs along the mountainside and crosses the gully. In 1959, an exceptionally rainy season caused a flood, which destroyed the bridge. A temporary Bailey bridge was subsequently built by the army, but in 1990 it was decided to design a new bridge. The main challenges posed to the designer included building the new deck and the abutments underneath the Bailey bridge without disrupting traffic, hoisting the deck just to the bottom of the Bailey bridge, and finally substituting the new deck for the Bailey bridge in one day. Other problems included the instability of the rock mass at the abutments and the gravitative convergence of the two sides of the gully. This paper describes the design, construction, and testing of the bridge replacement and the bridge abutments. 相似文献
15.
Amr El-Ragaby Ehab El-Salakawy Brahim Benmokrane 《Canadian Metallurgical Quarterly》2007,11(3):258-268
Since bridge deck slabs directly sustain repeated moving wheel loads, they are one of the most bridge elements susceptible to fatigue failure. Recently, glass fiber-reinforced polymer (FRP) composites have been widely used as internal reinforcement for concrete bridge deck slabs as they are less expensive compared to the other kinds of FRPs (carbon and aramid). However, there is still a lack of information on the performance of FRP–reinforced concrete elements subjected to cyclic fatigue loading. This research is designed to investigate the fatigue behavior and fatigue life of concrete bridge deck slabs reinforced with glass FRP bars. A total of five full-scale deck slabs were constructed and tested under concentrated cyclic loading until failure. Different reinforcement types (steel and glass FRP), ratios, and configurations were used. Different schemes of cyclic loading (accelerated variable amplitude fatigue loading) were applied. Results are presented in terms of deflections, strains in concrete and FRP bars, and crack widths at different levels of cyclic loading. The results showed the superior fatigue performance and longer fatigue life of concrete bridge deck slabs reinforced with glass FRP composite bars. 相似文献
16.
Lungui Li Zhongguo Ma Mary E. Griffey Ralph G. Oesterle 《Canadian Metallurgical Quarterly》2010,15(3):327-336
This paper focuses on an investigation of improved continuous longitudinal joint details for decked precast prestressed concrete girder bridge systems. Precast concrete girders with an integral deck that is cast and prestressed with the girder provide benefits of rapid construction along with improved structural performance and durability. Despite these advantages, use of this type of construction has been limited to isolated regions of the United States. One of the issues limiting more widespread use is a perceived problem with durability of longitudinal joints used to connect adjacent girders. This paper presents the results of a study to assess potential alternate joint details based on constructability, followed by testing of selected details. Seven reinforced concrete beam specimens connected with either lapped headed reinforcement or lapped welded wire reinforcement were tested along with a specimen reinforced by continuous bars for comparison. Test results were evaluated based on flexural capacity, curvature at failure, cracking, deflection, and steel strain. Based on the survey and the experimental program, a headed bar detail with a 152 mm (6 in.) lap length was recommended for replacing the current welded steel connector detail. 相似文献
17.
Currently, estimations of the crack width in the deck slab of bridges given by codes of practice are based on either theoretical or empirical approaches considering mainly the monotonic loading behavior. However, cracking in reinforced tensile members is highly influenced by the loading history (including both the loading and unloading processes) because of the irreversible nonlinear behavior of bond and of tensile response of concrete, resulting into residual cracks of non-negligible width. This paper investigates the influence of this phenomenon and presents a physical model describing it. An analytical model is developed and its results are compared to various tests with good agreement. Finally, a simple design formula is derived and recommendations for its application to practical cases are proposed. 相似文献
18.
Scott D. Porter J. Logan Julander Marvin W. Halling Paul J. Barr Hugh Boyle Shutao Xing 《Canadian Metallurgical Quarterly》2011,16(3):422-430
Precast deck panels are increasingly being utilized to reduce construction times and traffic delays as many departments of transportation (DOTs) emphasize accelerated bridge construction. Despite the short-term benefits, the connections between panels have a history of service failure. This research focused on the evaluation of the service and ultimate capacities of five precast deck panel connections. Full-scale tests were developed to determine the cracking and ultimate flexural strengths of two welded connections, a conventionally posttensioned connection, and two newly proposed, posttensioned, curved bolt connections. The conventionally posttensioned specimens were shown to perform well with the highest cracking loads and 0.42 times the theoretical capacity of a continuously reinforced concrete deck panel. The proposed curved bolt connections were shown to be a promising connection detail with approximately 0.5 times the theoretical capacity of a continuously reinforced panel. Data from the welded specimens showed that some welded connection types perform significantly better than others. The experimental results also compared closely with values calculated on the basis of finite-element modeling, which can be used for future analytical studies. 相似文献
19.
The design and construction of bridge systems with long-term durability and low maintenance requirements is a significant challenge for bridge engineers. One possible solution to this challenge could be through the use of new materials, e.g., fiber-reinforced polymer (FRP) composites, with traditional materials that are arranged as an innovative hybrid structural system where the FRP serves as a load-carrying constituent and a protective cover for the concrete. This paper presents the results of an experimental investigation designed to evaluate the performance of a 3/4 scale hybrid FRP-concrete (HFRPC) bridge deck and composite connection under sustained and repeated (fatigue) loading. In addition, following the sustained-load and fatigue portions of the experimental study, destructive testing was performed to determine the first strength-based limit state of the hybrid deck. Results from the sustained-load and fatigue testing suggest that the HFRPC deck system might be a viable alternative to traditional cast-in-place reinforced concrete decks showing no global creep behavior and no degradation in stiffness or composite action between the deck and steel girders after 2 million cycles of dynamic loading with a peak load of 1.26 times the scaled tandem load (TL). Furthermore, the ultimate strength test showed that the deck failed prior to the global superstructure at a load approximately six times the scaled TL. 相似文献
20.
This paper presents findings of field tests and analysis of two conventionally reinforced concrete (CRC) deck girder bridges designed in the 1950s. The bridges are in-service and exhibit diagonal cracks. Stirrup strains in the bridge girders at high shear regions were used to estimate distribution factors for shear. Impact factors based on the field tests are reported. Comparison of field measured responses with AASHTO factors was performed. Three-dimensional elastic finite-element analysis was employed to model the tested bridges and determine distribution factors specifically for shear. Eight-node shell elements were used to model the decks, diaphragms, bent caps, and girders. Beam elements were used to model columns under the bent caps. The analytically predicted distribution factors were compared with the field test data. Finally, the bridge finite-element models were employed to compare load distribution factors for shear computed using procedures in the AASHTO LRFD and Standard Specifications. 相似文献