Influence of CaF<Subscript>2</Subscript> and Li<Subscript>2</Subscript>O on the Viscous Behavior of Calcium Silicate Melts Containing 12 wt pct Na<Subscript>2</Subscript>O

Understanding the viscous behavior of silica-based molten fluxes is essential in maintaining the reliability of steel casting operations and in preventing breakouts. In particular, high concentrations of aluminum in recently developed transformation induced plasticity (TRIP) and twinning induced plasticity (TWIP) steels tend to promote reduction of silica in the mold fluxes that result in the formation of alumina, which in turn increases the viscosity. To counteract this effect, significant amounts of fluidizers such as CaF₂ and Li₂O are required to ensure that mold fluxes have acceptable lubrication and heat transfer characteristics. The viscous behavior of the slag system based on CaO-SiO₂-12 wt pct Na₂O with various concentrations of CaF₂ and Li₂O has been studied using the rotating spindle method to understand the effects on the viscosity with these additives. CaF₂ additions up to 8 wt pct were effective in decreasing the viscosity by breaking the network structure of molten fluxes, but CaF₂ concentrations above this level had a negligible effect on viscosity. Li₂O additions up to 2 wt pct were also effective in decreasing the viscosity, but the effect was comparatively negligible above 2 wt pct. Using Fourier transform infrared (FTIR) analysis of as-quenched slag samples, it was concluded that the viscosity was controlled more effectively by changing the larger complex silicate structures of rings and chains than by changing the amounts of simpler dimers and monomers.     

Coarsening of Al<Subscript>3</Subscript>Sc precipitates in an Al-0.28 wt pct Sc alloy

The Ostwald ripening of Al₃Sc precipitates in an Al-0.28 wt pct Sc alloy during aging at 673, 698, and 723 K has been examined by measuring the average size of precipitates by transmission electron microscopy (TEM) and the reduction in Sc concentration in the Al matrix with aging time, t, by electrical resistivity. The coarsening kinetics of Al₃Sc precipitates obey the t ^1/3 time law, as predicted by the Lifshitz-Slyozov-Wagner (LSW) theory. The kinetics of the reduction of Sc concentration with t are consistent with the predicted t ^−1/3 time law. Application of the LSW theory has enabled independent calculation of the Al/Al₃Sc interface energy, γ, and volume diffusion coefficient, D, of Sc in Al during coarsening of precipitates. The Gibbs-Thompson equation has been used to give a value of γ using coarsening data obtained from TEM and electrical resistivity measurements. The value of γ estimated from the LSW theory is 218 mJ m⁻², which is nearly identical to 230 mJ m⁻² from the Gibbs-Thompson equation. The pre-exponential factor and activation energy for diffusion of Sc in Al are determined to be (7.2±6.0)×10⁻⁴ m² s⁻¹ and 176±9 kJ mol⁻¹, respectively. The values are in agreement with those for diffusion of Sc in Al obtained from tracer diffusion measurements.     

Phase-equilibrium data and liquidus for the system “MnO”-CaO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> at Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/SiO<Subscript>2</Subscript> of 0.55 and 0.65

Phase-equilibrium data and liquidus isotherms for the system “MnO”-CaO-(Al₂O₃+SiO₂) at silicomanganese alloy saturation have been determined in the temperature range of 1373 to 1723 K. The results are presented in the form of the pseudoternary sections “MnO”-CaO-(Al₂O₃+SiO₂) with Al₂O₃/SiO₂ weight ratios of 0.55 and 0.65. The primary-phase fields have been identified in this range of conditions.     

Effects of FeO and CaO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Ratio in Slag on the Cleanliness of Al-Killed Steel

The slag composition plays a critical role in the formation of inclusions and the cleanliness of steel. In this study, the effects of FeO content and the C/A (CaO/Al₂O₃) ratio in the slag on the formation of inclusions were investigated based on a 10-minute slag–steel reaction in a MgO crucible. The FeO content in the top slag was shown to have a significant effect on the formation of MgO·Al₂O₃ spinel inclusions, and critical content exists; when the initial FeO content in the slag was less than 2 pct, MgO·Al₂O₃ spinel inclusions formed, and the T.O (total oxygen) was 20 ppm; when the initial FeO content in the slag was more than 4 pct, only Al₂O₃ inclusions were observed and the T.O was 50 ppm. It was clarified that the main source of Mg for the MgO·Al₂O₃ spinel inclusion formation was the top slag rather than the MgO crucible. In addition, the cleanliness of the steel increased as the initial FeO content in the top slag decreased. As regards the effects of the C/A ratio, the MgO amount in the observed inclusions gradually increased, whereas the T.O content decreased gradually with the increasing C/A ratio. Slag with a composition close to the CaO-saturated region had the best effect on the inclusion absorption.     

Distribution Ratios of Phosphorus Between CaO-FeO-SiO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Na<Subscript>2</Subscript>O/TiO<Subscript>2</Subscript> Slags and Carbon-Saturated Iron

In order to effectively enhance the efficiency of dephosphorization, the distribution ratios of phosphorus between CaO-FeO-SiO₂-Al₂O₃/Na₂O/TiO₂ slags and carbon-saturated iron (\( L_{\text{P}}^{\text{Fe-C}} \)) were examined through laboratory experiments in this study, along with the effects of different influencing factors such as the temperature and concentrations of the various slag components. Thermodynamic simulations showed that, with the addition of Na₂O and Al₂O₃, the liquid areas of the CaO-FeO-SiO₂ slag are enlarged significantly, with Al₂O₃ and Na₂O acting as fluxes when added to the slag in the appropriate concentrations. The experimental data suggested that \( L_{\text{P}}^{\text{Fe-C}} \) increases with an increase in the binary basicity of the slag, with the basicity having a greater effect than the temperature and FeO content; \( L_{\text{P}}^{\text{Fe-C}} \) increases with an increase in the Na₂O content and decrease in the Al₂O₃ content. In contrast to the case for the dephosphorization of molten steel, for the hot-metal dephosphorization process investigated in this study, the FeO content of the slag had a smaller effect on \( L_{\text{P}}^{\text{Fe-C}} \) than did the other factors such as the temperature and slag basicity. Based on the experimental data, by using regression analysis, \( \log L_{\text{P}}^{\text{Fe-C}} \) could be expressed as a function of the temperature and the slag component concentrations as follows:

$$ \begin{aligned} \log L_{\text{P}}^{\text{Fe-C}} & = 0.059({\text{pct}}\;{\text{CaO}}) + 1.583\log ({\text{TFe}}) - 0.052\left( {{\text{pct}}\;{\text{SiO}}_{2} } \right) - 0.014\left( {{\text{pct}}\;{\text{Al}}_{2} {\text{O}}_{3} } \right) \\ \, & \quad + 0.142\left( {{\text{pct}}\;{\text{Na}}_{2} {\text{O}}} \right) - 0.003\left( {{\text{pct}}\;{\text{TiO}}_{2} } \right) + 0.049\left( {{\text{pct}}\;{\text{P}}_{2} {\text{O}}_{5} } \right) + \frac{13{,}527}{T} - 9.87. \\ \end{aligned} $$

     

Wear of Plasma Sprayed Conventional and Nanostructured Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>, Based Coatings

An ever increasing demand for high-performance ceramic coatings has made it inevitable for developing techniques with precise control over the process parameters to enable the fabrication of coatings with the desired microstructure and improved structural properties. The literature on plasma sprayed nanostructured ceramic coatings such as of Al₂O₃, Cr₂O₃, and their composites obtained using reconstituted nano sized ceramic powders has been reviewed in this study. Ceramic coatings due to their enhanced properties are on the verge of replacing conventional ceramic coatings used for various applications like automotive systems, boiler components, power generation equipment, chemical process equipment, aircraft engines, pulp and paper processing equipment, land-based and marine engine components, turbine blades etc. In such cases, the advantage is greater longevity and reliability for realizing the improved performance of ceramic coatings. It has been observed that the plasma sprayed nanostructured ceramic coatings show improvement in resistance to wear, erosion, corrosion, and mechanical properties as compared to their conventional counterparts. This article reviews various aspects concerning the plasma sprayed ceramic coatings such as (i) the present understanding of formation of plasma-spray coatings and factors affecting them, (ii) wear performance of nanostructured Al₂O₃, Cr₂O₃ and their composite ceramic coatings in comparison to their conventional counterparts, and (iii) mechanisms of wear observed for these coatings under various conditions of testing.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Concentration on Density and Structure of (CaO-SiO<Subscript>2</Subscript>)-xAl<Subscript>2</Subscript>O<Subscript>3</Subscript> Slag

The effect of Al₂O₃ concentration on the density and structure of CaO-SiO₂-Al₂O₃ slag was investigated at multiple Al₂O₃ mole percentages and at a fixed CaO/SiO₂ ratio of 1. The experiments were conducted in the temperature range of 2154 K to 2423 K (1881 °C to 2150 °C) using the aerodynamic levitation technique. In order to understand the relationship between density and structure, structural analysis of the silicate melts was carried out using Raman spectroscopy. The density of each slag sample investigated in this study decreased linearly with increasing temperature. When the Al₂O₃ content was less than 15 mole pct, density decreased with increasing Al₂O₃ content due to the coupling of Si (Al), whereas above 20 mole pct density of the slag increased due to the role of Al³⁺ ion as a network modifier.     

Oxidation of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Scale-Forming MAX Phases in Turbine Environments

High temperature oxidation of alumina-forming MAX phases, Ti₂AlC and Cr₂AlC, were examined under turbine engine environments and coating configurations. Thermogravimetric furnace tests of Ti₂AlC showed a rapid initial transient due to non-protective TiO₂ growth. Subsequent well-behaved cubic kinetics for alumina scale growth were shown from 1273 K to 1673 K (1000 °C to 1400 °C). These possessed an activation energy of 335 kJ/mol, consistent with estimates of grain boundary diffusivity of oxygen (~375 kJ/mol). The durability of Ti₂AlC under combustion conditions was demonstrated by high pressure burner rig testing at 1373 K to 1573 K (1100 °C to 1300 °C). Here good stability and cubic kinetics also applied, but produced lower weight gains due to volatile TiO(OH)₂ formation in water vapor combustion gas. Excellent thermal stability was also shown for yttria-stabilized zirconia thermal barrier coatings deposited on Ti₂AlC substrates in 2500-hour furnace tests at 1373 K to 1573 K (1100 °C to 1300 °C). These sustained a record 35 µm of scale as compared to 7 μm observed at failure for typical superalloy systems. In contrast, scale and TBC spallation became prevalent on Cr₂AlC substrates above 1423 K (1150 °C). Cr₂AlC diffusion couples with superalloys exhibited good long-term mechanical/oxidative stability at 1073 K (800 °C), as would be needed for corrosion-resistant coatings. However, diffusion zones containing a NiAl-Cr₇C₃ matrix with MC and M₃B₂ particulates were commonly formed and became extensive at 1423 K (1150 °C).     

Thermodynamic behavior of nickel in CaO-SiO<Subscript>2</Subscript>-Fe<Subscript>t</Subscript>O slag

The distribution ratio of nickel between Ag-Ni alloy and CaO-SiO₂-Fe _t O slag at high temperatures was measured to clarify the dissolution mechanism of nickel in this melt. Also, the nickel oxide capacity was suggested and was compared to phosphate and sulfide capacities. The dissolution mechanism of nickel into the CaO-SiO₂-Fe _t O slags could be described by the following equation from the effect of oxygen potential and slag basicity on nickel dissolution behavior:

A reinvestigation of phase equilibria in the system Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>-ZnO

The phase equilibria and liquidus temperatures in the binary SiO₂-ZnO system and in the ternary Al₂O₃-SiO₂-ZnO system at low Al₂O₃ concentrations have been experimentally determined using the equilibration and quenching technique followed by electron probe X-ray microanalysis. In the SiO₂-ZnO system, two binary eutectics involving the congruently melting willemite (Zn₂SiO₄) were found at 1448±5 °C and 0.52±0.01 mole fraction ZnO and at 1502±5 °C and 0.71±0.01 mole fraction ZnO, respectively. The two ternary eutectics involving willemite previously reported in the Al₂O₃-SiO₂-ZnO system were found to be at 1315±5 °C and 1425±25 °C, respectively. The compositions of the eutectics are 0.07, 0.52, and 0.41 and 0.05, 0.28, and 0.67 mole fraction Al₂O₃, SiO₂, and ZnO, respectively. The results of the present investigation are significantly different from the results of previous studies.     

Formation of CaS on Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-CaO inclusions during solidification of steels

In this article, the effect of CaS formation on the evolution of Al₂O₃-CaO inclusions in low-carbon Al-killed and Ca-treated steel during the solidification process is investigated through high-temperature confocal scanning laser microscopy (CSLM). The inclusions started as mostly liquid-globular inclusions that did not agglomerate with each other on the melt surface but during solidification were seen to change shape into an irregular morphology. The shape change was found to be due to the reaction between the Al₂O₃-CaO inclusions with the dissolved S and Al in the melt, resulting in the formation of dense CaS shells around the inclusions. The melt composition during solidification, estimated from the observed solid δ-front advance rate, was compared to the thermodynamic limit for CaS precipitation. The observed growth rate of the CaS shell was found to initially increase with decreasing temperature because of the higher, solid δ-front advance rates at lower temperatures, which results in higher rates of S and Al partitioning. Once CaS had precipitated, the inclusions were found to form agglomerates on the melt surface because of fluid flow, initially, and later, the capillary depression.     

Separation of Fine Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Inclusion from Liquid Steel with Super Gravity

An innovative approach of super gravity was proposed to separate fine Al₂O₃ inclusions from liquid steel in this study. To investigate the removal behaviors of inclusions, the effects of different gravity coefficients and time on separating the inclusions were studied. The results show that a large amount of Al₂O₃ inclusions gathered at the top of the sample obtained by super gravity, whereas there were almost no inclusions appearing at the bottom. The volume fraction and number density of inclusions presented a gradient distribution along the direction of the super gravity, which became steeper with increasing gravity coefficient and separating time. As a result of the collision between inclusions, a large amount of inclusions aggregated and grew during the moving process, which further decreased the removal time. The experimental required removal time of inclusions is close to the theoretical values calculated by Stokes law under gravity coefficient G ≤ 80, t ≤ 15 minutes, and the small deviation may be because the inclusion particles are not truly spherical. Under the condition of gravity coefficient G = 80, t = 15 minutes, the total oxygen content at the bottom of the sample (position of 5 cm) is only 8.4 ppm, and the removal rate is up to 95.6 pct compared with that under normal gravity.     

Thermodynamics on the formation of spinel (MgO·Al<Subscript>2</Subscript>O<Subscript>3</Subscript>) inclusion in liquid iron containing chromium

The stability diagram of MgO, spinel solid solution (MgO·(Al _X Cr_1−X )₂O₃), and sesquioxide solid solution ((Al _Y Cr_1−Y )₂O₃) as a function of Mg, Al, and O contents at a constant chromium content (18 mass pct) in liquid iron is drawn at 1873 K. The interaction parameters between Mg and other solutes (Al, Cr, Ni, Ti, Si, and C) are determined by the experimental method, which assures equilibrium between Mg vapor and liquid iron, were applied to calculate the diagram. Titanium deoxidation is not recommended for the prevention of spinel formation, because Ti accelerates Mg dissolution from refractory or slag due to its high affinity for Mg (e _Mg ^Ti = − 0.64). The standard Gibbs free energies of formation for the three inclusions (periclase, spinel, and sesquioxide solid solutions) and the tielines between two solid solutions were calculated with the aid of the regular solution model and the thermochemical F*A*C*T database computing system, respectively. The phase stability regions and oxygen content in steel for the current Fe-Mg-Al-Cr (18 mass pct)-O system are compared with those of the previous non-Cr system. Detailed information on the spinel composition according to Mg and Al contents is also available from the present stability diagram.