Microwave switches based on 4H-SiC <Emphasis Type="Italic">p-i-n</Emphasis> diodes

Problems pertaining to the modeling and development of a microwave modulator based on 4H-SiC p-i-n diodes are considered. The results of theoretical and experimental investigations of the microwave characteristics of 4H-SiC p-i-n diodes and the parameters of a microstrip modulator for a 1–10 GHz range based on these diodes are reported for the first time. In the diode switching schemes studied, the transmission losses amount to 0.8–8 dB and the decoupling is within −15 to −18 dB. The experimental characteristics of modulators are determined primarily by the parameters of diodes and agree well with the results of model calculations.     

Long-wavelength photodiodes based on <Emphasis Type="Italic">n</Emphasis>-GaSb/<Emphasis Type="Italic">n</Emphasis>-GaInAsSb/<Emphasis Type="Italic">p</Emphasis>-AlGaAsSb heterostructures

Photodiodes sensitive in the wavelength ranges 1–2.5 μm and 1–4.8 μm at room temperature have been created on the basis of n-GaSb/n-GaInAsSb/p-AlGaAsSb double-junction heterostructures of two types. The broadband photosensitivity of the diode structures of both types is indicative of the complete separation of photogenerated electron-hole pairs in the staggered n-p heterojunction (n-GaInAsSb/p-AlGaAsSb). The noise characteristics of photodetectors based on the proposed diode structures have been studied. Prospects of the use of these devices in thermophotovoltaic cells for low-temperature radiation sources are considered.     

Features of degradation in high-voltage 4H-SiC <Emphasis Type="Italic">p-i-n</Emphasis> diodes under the action of forward current pulses

Degradation in silicon carbide based p-i-n diodes under the action of a forward current in a pulsed regime has been studied for the first time. It is established that, at current pulse durations below several milliseconds, the extent of degradation is much smaller than that in the dc regime for the same total charge transferred through the diode structure. The partial self-recovery (decrease in the extent of degradation with the time) of the diode structures at room temperature was also observed for the first time.     

The Activation Energy <Emphasis Type="Italic">U</Emphasis>(<Emphasis Type="Italic">T</Emphasis>,<Emphasis Type="Italic">H</Emphasis>) in Y-based Superconductors

Based on the Arrhenius equation, a method to calculate the activation energy from the resistance transition is proposed for high temperature superconductors. This method is applied to the Y-based superconductors. The activation energy is found to be U(T,H)∼(1−T/T _c )^4.8(H/H ₀)^−3.8 of YBCO crystal, and U(T,H)∼(1−T/T _c )^3.3(H/H ₀)^−2.2 of Er doped MTG YBCO crystal, respectively. With the obtained activation energy U(T,H), the lower part of the experimental curve ρ(T,H) and its derivative can be reproduced.      

Impact-ionization-stimulated electroluminescence in isotype <Emphasis Type="Italic">n</Emphasis>-GaSb/<Emphasis Type="Italic">n</Emphasis>-AlGaAsSb/<Emphasis Type="Italic">n</Emphasis>-GaInAsSb heterostructures

We have studied electroluminescence in n-GaSb/n-AlGaAsSb/n-GaInAsSb heterostructures with isotype heterojunctions, in which the quantum efficiency of emission is increased due to the additional production of electron-hole pairs as a result of the impact ionization that takes place near the heterointerface. The impact ionization in such heterostructures is possible due to the presence of deep wells in the energy band structure.     

Speed of sound in <Emphasis Type="Italic">n</Emphasis>-hexane, <Emphasis Type="Italic">n</Emphasis>-octane, <Emphasis Type="Italic">n</Emphasis>-decane,and <Emphasis Type="Italic">n</Emphasis>-hexadecane in the liquid state

This paper describes an improved experimental facility for measuring the speed of sound in liquids with an accuracy of up to 0.1%. Measurements of the speed of sound in liquid n-hexane, n-octane, n-decane, and n-hexadecane at temperatures of 298–433 K and pressures of 0.1–100 MPa have been made. It has been shown that in the possible comparison range the obtained values of the speed of sound are in good agreement with the literature data. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 81, No. 4, pp. 732–736, July–August, 2008.     

Nernst Signal in High-<Emphasis Type="Italic">T</Emphasis><Subscript><Emphasis Type="Italic">c</Emphasis></Subscript> Superconductors

The time-dependent Ginzburg–Landau equation with thermal noise is used to calculate the Nernst signal e _N , describing the Nernst effect, in type-II superconductor in the vortex-liquid regime. The Gaussian method used is an elaboration of the Hartree–Fock method. An additional assumption often made in analytical calculations that only the lowest Landau level significantly contributes to physical quantities of interest in the high-field limit is lifted by including all the Landau levels. The values of e _N are in good quantitative agreement with experimental data for temperature close to T _c on Bi₂Sr₂CaCu₂O_8+δ and Bi₂Sr₂Ca₂Cu₃O_10+δ .     

Project of laser-pumped quantum <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">X</Emphasis></Subscript> magnetometer

The possibility of creating a new scheme of a laser-pumped quantum magnetometric device based on a double-beam M _X magnetometer is considered. The proposed system ensures the simultaneous measurement of the modulus of the Earth’s magnetic field vector (with an absolute accuracy of 0.02 nT) and two angles of deviation of this vector with an absolute accuracy and sensitivity of not worse than 0.4″ (0.1 nT) at a measurement time of τ = 1 s. In contrast to the known analogous systems, the proposed scheme does not require generating additional magnetic fields.     

Inference with progressively censored <Emphasis Type="Italic">k</Emphasis>-out-of-<Emphasis Type="Italic">n</Emphasis> system lifetime data

A system with n independent components which works if and only if a least k of its n components work is called a k-out-of-n system. For exponentially distributed component lifetimes, we obtain point and interval estimators for the scale parameter of the component lifetime distribution of a k-out-of-n system when the system failure time is observed only. In particular, we prove that the maximum likelihood estimator (MLE) of the scale parameter based on progressively Type-II censored system lifetimes is unique. Further, we propose a fixed-point iteration procedure to compute the MLE for k-out-of-n systems data. In addition, we illustrate that the Newton–Raphson method does not converge for any initial value. Finally, exact confidence intervals for the scale parameter are constructed based on progressively Type-II censored system lifetimes.     

Thermodynamic modeling of BC<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>N<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> chemical vapor deposition from mixtures of <Emphasis Type="Italic">N</Emphasis>-trimethylborazine and nitrogen

Thermodynamic modeling of the chemical vapor deposition of boron-carbonitride-based films in the B-C-N-H-O system using mixtures of N-trimethylborazine and nitrogen is carried out for reduced pressures (13.3 and 1.33 Pa) and a wide temperature range (300–1300 K). The source of oxygen impurities in this system is a residual pressure of 0.40 Pa. The results indicate that films of various compositions can be grown. The conditions for the deposition of BC _x N _y films are identified.     

The search for novel superhard and incompressible materials on the basis of higher borides of <Emphasis Type="Italic">s</Emphasis>, <Emphasis Type="Italic">p</Emphasis>, <Emphasis Type="Italic">d</Emphasis> metals

The state of the art in the search for novel superhard and (or) incompressible materials on the basis of higher borides of s, p, d metals has been briefly reviewed. The information has been considered about experimental and theoretical studies of the following groups of borides: diborides of 4d, 5d heavy metals (Tc, Ru, Rh, Re, Os, and Ir), hexagonal tetraborides with the WB₄-type structure, and AMB₁₄ borides (where A, M are s, p metals) as well as of a number of related systems.     

<Emphasis Type="Italic">p</Emphasis>-AgCoO<Subscript>2</Subscript>/<Emphasis Type="Italic">n</Emphasis>-ZnO heterojunction diode grown by rf magnetron sputtering

P-type transparent semiconducting AgCoO₂ thin films were deposited by rf magnetron sputtering of sintered AgCoO₂ target. The AgCoO₂ films grown by rf sputtering were highly c-axis oriented showing only (001) reflections in the X-ray diffraction pattern unlike in the case of amorphous films grown by pulsed laser deposition (PLD). The bulk powder of AgCoO₂ was synthesized by hydrothermal process. The optical bandgap was estimated as 4·15 eV and has a transmission of about 50% in the visible region. The temperature dependence of conductivity shows a semiconducting behaviour. The positive sign of Seebeck coefficient (+220 μVK⁻¹) indicates p-type conductivity. Transparent p-n heterojunction on glass substrate was fabricated by rf magnetron sputtering of p-AgCoO₂ and n-type ZnO: Al thin films. The structure of the diode was glass/ITO/n-ZnO/p-AgCoO₂. The junction between p-AgCoO₂ and n-ZnO was found to be rectifying.     

Highly efficient gene silencing and bioimaging based on fluorescent carbon dots <Emphasis Type="Italic">in vitro</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis>

Small interfering RNA (siRNA) is an attractive therapeutic candidate for sequencespecific gene silencing to treat incurable diseases using small molecule drugs.However,its efficient intracellular delivery has remained a challenge.Here,we have developed a highly biocompatible fluorescent carbon dot (CD),and demonstrate a functional siRNA delivery system that induces efficient gene knockdown in vitro and in vivo.We found that CD nanoparticles (NPs) enhance the cellular uptake of siRNA,via endocytosis in tumor cells,with low cytotoxicity and unexpected immune responses.Real-time study of fluorescence imaging in live cells shows that CD NPs favorably localize in cytoplasm and successfully release siRNA within 12 h.Moreover,we demonstrate that CD NP-mediated siRNA delivery significantly silences green fluorescence protein (GFP) expression and inhibits tumor growth in a breast cancer cell xenograft mouse model of tumor-specific therapy.We have developed a multi functional siRNA delivery vehicle enabling simultaneous bioimaging and efficient downregulation of gene expression,that shows excellent potential for gene therapy.     

Short-term <Emphasis Type="Italic">in vitro</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis> biocompatibility of a biodegradable polyurethane foam based on 1,4-butanediisocyanate

In this study short-term in vitro and in vivo biocompatibility apects of a biodegradable polyurethane (PU) foam were evaluated. The PU consists of hard urethane segments and amorphous soft segments based on a copolyester of dl-lactide and -caprolactone. The urethane segments are of uniform length and synthesized with 1,4-butanediisocyanate. The foam has good mechanical properties and will be used for tissue regeneration applications. Degradation tests were carried out in a buffer solution for twelve weeks. Cytotoxicity was determined using extract and direct contact test methods with incubation periods varying form 24 to 72 h. The foam was implanted subcutaneously for one, four and twelve weeks and the tissue response to the material was histologically evaluated.In vitro, the mass loss was 3.4% after twelve weeks. In the cytotoxicity tests the PU caused no abnormal growth behaviour, nor morphological changes or inhibition in metabolic activity. The in vivo studies showed no toxic tissue response to the PU. Connective tissue ingrowth, accompanied by vascular ingrowth was complete at twelve weeks. In vivo degradation had started within four to twelve weeks.In conclusion, the PU shows a good in vitro and in vivo biocompatibility in these short-term experiments.     

Evaluation of hydrogels for soft tissue adhesives <Emphasis Type="Italic">in vitro</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis> analyses

In this study, natural materials (sodium alginate, dextran, gelatin and carboxymethyl chitosan) were modified to get aldehyde components and amino components. Upon mixing the two-component solutions together, four kinds of Schiff base hydrogels formed successfully within 5-300 s and could seal the wound tissue. The cytotoxicity tests of hydrogel extraction solution confirmed that the hydrogels are nontoxic materials. The adhesive ability was evaluated in vivo by measuring the adhesive strength after sealing the skin incisions on the back of rats. All the hydrogels showed higher adhesive strength than that of commercial fibrin glue and the blank control. The histological staining observation by hematoxylin and eosin staining (HE) and Masson’s trichrome staining (MTC) methods suggested that the hydrogels had good biocompatibility and biodegradation in vivo. They have only normal initial inflammation to skin tissue and could improve the formation of new collagen in the incision section. So, the prepared hydrogels were both safe and effective tissue adhesive, which had the great potentials to be used as skin tissue adhesive.     

<Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">n</Emphasis> junctions in ZnO implanted with group V ions

n-Type ZnO〈Ga〉 films were implanted with 150-keV N⁺ (As⁺) ions to a dose of 7 × 10¹⁵ cm⁻² and then annealed in atomic oxygen at different temperatures. p-Type conductivity was obtained at annealing temperatures in the range 770–870 K. The parameters of the p-type layers were determined by photoluminescence spectroscopy, secondary ion mass spectrometry, and Hall effect measurements. According to the Hall data, the p-type layers had a resistivity of ∼30 Ω cm, carrier mobility of ∼2 cm²/(V s), and carrier concentration of ∼10¹⁸ cm⁻³. The electroluminescence spectra of the p-n junctions produced by ion implantation showed a band at 440 nm, due to recombination via donor-acceptor pairs.     

Nonlinear <Emphasis Type="Italic">p</Emphasis>-ary Sequences

Low correlation p-ary sequences with p an odd prime are constructed. They are obtained as Gray images of codewords of a subcode of the generalized Kerdock codes over the ring _p². They can be shown to be nonlinear in some precise sense. The research of this author is partially supported by NUS-ARF research grant R-146-000-029-112 and DSTA research grant R-394-000-011-422.This research was done while this author was visiting Temasek Laboratories and Department of Mathematics, NUS. The author thanks them for their hospitality.Keywords:Galois rings, Gray map, Kerdock code, CDMA.     

Synthesis,growth, optical,mechanical and electrical properties of <Emphasis Type="Italic">L</Emphasis>-lysine <Emphasis Type="Italic">L</Emphasis>-lysinium dichloride nitrate (<Emphasis Type="Italic">L</Emphasis>-LLDN) single crystal

Semi-organic nonlinear optical material, L-lysine L-lysinium dichloride nitrate (2C₆H₁₅N₂O₂⁺_{2}^{+} · H⁺ · NO₃^-_{3}^{-} · 2Cl⁻) was synthesized at room temperature. Single crystals of L-LLDN were grown by slow cooling solution growth technique. The grown crystal was confirmed by powder X-ray diffraction analysis. The crystalline perfection of the grown single crystal was characterized by high-resolution X-ray diffraction (HRXRD) studies. The cut-off wavelength was determined by UV-vis transmission spectral analysis. The frequency doubling of the grown crystal was confirmed by powder second harmonic generation (SHG) measurement. The refractive index and birefringence of the crystal were determined using He–Ne laser source. Mechanical property of the crystal was determined by Vickers hardness tester. The frequency and temperature dependence of dielectric constant (ε _r), dielectric loss (tan δ) and a.c. conductivity (σ _ac) were also measured.     

<Emphasis Type="Italic">N-S</Emphasis> transition in nonisothermal characteristics of silicon diodes and thyristors

The results of numerical modeling of the stationary nonisothermal current-voltage (I-U) characteristics of forward-biased high-voltage diodes and thyristors in the interval of current densities J ～ 200–500 A/cm² revealed an N-S transition in the shape of these curves and a hysteresis in the constant current source regimes. It is established that the mechanism of these phenomena is related to a temperature-induced decrease in the coefficient of ambipolar diffusion under the conditions of enhanced recombination. Devices with such I-U characteristics can be irreversibly switched by short current pulses from stable states on the working branch to the states with high heat evolution, which leads to a risk of thermal breakdown.     

Porous-conductive chitosan scaffolds for tissue engineering II. <Emphasis Type="Italic">in vitro</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis> degradation

Porous-conductive chitosan scaffolds were fabricated by blending conductive polypyrrole (PPy) particles with chitosan solution and employing an improved phase separation method. In vitro and in vivo degradation behaviors of these scaffolds were investigated. In the case of in vitro degradation, an enzymatic degradation system was employed and lysozyme was used as a working enzyme. Meanwhile, the degradation products of scaffolds, glucosamine and N-acetyl-glucosamine, were also analyzed with a HPLC method. In vivo degradation of scaffolds was performed by subcutaneously implanting these scaffolds in rat for prescheduled time intervals. In the both cases, the weight-loss of scaffolds was monitored during the whole degradation process for evaluating the degradation of scaffolds. The changes in conductivity of scaffolds afterin vitro or in vivo degradation were also measured using a four-point technique. It was observed that the pore parameters of scaffolds themselves could significantly influence the degradation behaviors of scaffolds but the PPy content in the scaffolds seemed not to impart its effect to the degradation of scaffolds. Degradation dynamics of scaffolds and conductivity measurements indicated that these scaffolds shown fairly different behaviors in their in vitro and in vivo degradation process. According to the results obtained from in vitro and in vivo degradation of scaffolds and based on some requirements of practical tissue engineering application, it was suggested that the PPy content in the scaffold should be slightly higher than 3 wt.% but lower than 6 wt.%.