The non-linear vibration of FGM truncated conical shells

In this study, the non-linear vibration of truncated conical shells made of functionally graded materials (FGMs) has been investigated using the large deformation theory with von Karman–Donnell-type of kinematic non-linearity. The material properties of FGMs are assumed to vary continuously through the thickness of the shell. The fundamental relations, the non-linear motion and compatibility equations of the FGM truncated conical shell are derived. By using Superposition method, Galerkin method and Harmonic balance method, the non-linear vibration of an FGM truncated conical shell is analyzed. Finally, the influences of compositional profiles and variation of shell geometry on the dimensionless non-linear frequency parameter and the variation of ratio of the non-linear frequency to the linear frequency are investigated. The present results are compared with the available data for a special case.     

Buckling of functionally graded conical panels under mechanical loads

This paper presents an analytical approach to investigate the linear buckling of truncated conical panels made of functionally graded materials and subjected to axial compression, external pressure and the combination of these loads. Material properties are assumed to be temperature-independent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. Equilibrium and linear stability equations in terms of displacement components for conical panels are derived by using the classical thin shell theory. Approximate analytical solutions are assumed to satisfy simply supported boundary conditions and Galerkin method is applied to obtain closed-form relations of bifurcation type buckling loads. An analysis is carried out to show the effects of material and geometrical properties and combination of loads on the linear stability of conical panels.     

Flutter of high-dimension nonlinear system for a FGM truncated conical shell

The nonlinear flutters of a truncated conical shell, which is subjected to aerodynamic pressure and aerodynamic heating, are researched. Material properties with gradient features along the radial direction depend on the temperature. The supersonic aerodynamic force is obtained by applying the first-order piston theory, including the correction factor for curvature. The temperature in the external surface of the functionally graded material truncated conical shell rises as a result of viscous aerodynamic heating, and the temperature distribution along the thickness can be described by polynomial series. Hamilton's principle is utilized to obtain the nonlinear partial differential equilibrium equation of the system. Using Galerkin's method, a high-dimensional nonlinear system can be derived. Without considering the parts of nonlinear terms and the external forcing excitation, the flutter boundaries are obtained by solving the eigenvalues problem. The influences of ratios of top radius to thickness, semi-vertex angle, and volume fraction index on nonlinear dynamic characteristics of functionally graded material truncated conical shell are studied in detail by the fourth-order Runge–Kutta algorithm.     

The stability of a thin three-layered composite truncated conical shell containing an FGM layer subjected to non-uniform lateral pressure

This paper examines the stability of thin three-layered truncated conical shells containing a functionally graded (FG) layer subjected to non-uniform lateral pressure varying with the longitudinal coordinate. The material properties of the functionally graded layer are assumed to vary continuously through the thickness of the shell, and the variation of properties follows an arbitrary distribution in terms of the volume fractions of the constituents. Further, the fundamental relations for stability and compatibility equations of three-layered truncated conical shells containing an FGM layer have been obtained. These equations, ascertained via Galerkin’s method, have been transformed into a pair of time-dependent differential equations. Then, critical non-uniform lateral pressure has been conclusively obtained. This paper is the result of a detailed parametric study conducted to determine the influences of thickness variations in the FG layer, radius-to-thickness ratio, lengths-to-radius ratio, and the material composition and material profile index on the critical parameters of three-layered, truncated, conical shells. Finally, the results will be validated through the comparison of obtained values with those in the existing literature.     

Nonlinear dynamic buckling of functionally graded cylindrical shells subjected to time-dependent axial load

This paper is presented to solve the nonlinear dynamic buckling problem of a new type of composite cylindrical shells, made of ceram/metal functionally graded materials. The material properties vary smoothly through the shell thickness according to a power law distribution of the volume fraction of the constituent materials. The dynamic axial load is set in a linear increase form with regard to time. By taking the temperature-dependent material properties into account, the effect of environmental temperature rise is included. The nonlinear dynamic equilibrium equation of the shell was obtained by applying an energy method, and was then solved using the four-order Runge–Kutta method. The critical condition was eventually determined using B-R dynamic buckling criterion. Numerical results show the dynamic buckling load is higher than its static counterpart. Meanwhile, various effects of the inhomogeneous parameter, loading speed, dimension parameter, environmental temperature rise and initial geometrical imperfection on nonlinear dynamic buckling are discussed.     

Analytical investigation on the free vibration behavior of rotating FGM truncated conical shells reinforced by orthogonal eccentric stiffeners

This article presents an analytical investigation on the free vibration behavior of rotating functionally graded truncated conical shells reinforced by stringers and rings with the change of spacing between stringers. Using the Donnell shell theory, smeared stiffeners technique, and taking into account the influences of centrifugal force and Coriolis acceleration, the governing equations are derived. These variable coefficient partial differential equations are studied by the Galerkin method. The sixth-order polynomial equation of natural frequency is obtained. Numerical results show effects of stiffener and input parameters on the frequency of shell.     

Dynamic pulse buckling of composite shells subjected to external blast

Dynamic pulse buckling of woven E-Glass/Vinyl Ester and laminated E-Glass/Epoxy cylindrical shells subjected to uniform overpressure and asymmetric pressure pulse (side-on explosion) were examined. The solutions for the radial shell deformations were represented by Mathieu differential equations. The dynamic instability of the shells was determined from a Mathieu stability diagram. It was found that the stability of the shells depended on lay-up, aspect ratio as well as impulse distribution. The stable vibration response of the shells with side-on explosion compared well with finite element solutions using a Dynamic, Implicit analysis in ABAQUS Standard. First-ply failure of the woven E-Glass/Vinyl Ester shell with side-on explosion was predicted using a modified Hashin–Rotem failure criterion. It was shown that the thinner woven E-Glass/Vinyl Ester shells were more likely to fail by dynamic instability, whereas the thicker woven E-Glass/Vinyl Ester shells were more likely to fail by first-ply failure.     

Buckling of FGM cylindrical shells subjected to pure bending load

In this paper, buckling behaviors of composite cylindrical shells made from functionally graded materials (FGMs) subjected to pure bending load were investigated. The material properties were assumed to be graded along the thickness. The non-uniform bending force on the shell section was considered in the buckling government equation of FGM cylindrical shells based on the Donnell shallow shell theory. The prebuckling deformation of the FGM cylindrical shells was neglected and the buckling mode was assumed to occur non-uniformly in local district along the shell circumferential direction. The eigenvalue method was used to obtain the buckling critical condition. The theoretical results were in excellent agreement with those of ABAQUS code. Results show that the inhomogenity of the materials is significant for buckling of FGM cylindrical shells.     

The buckling of FGM truncated conical shells subjected to combined axial tension and hydrostatic pressure

The purpose of this paper is to investigate the elastic buckling of FGM truncated thin conical shells under combined axial tension and hydrostatic pressure. Here axial tensions are separately applied to small and large bases of the truncated conical shell, respectively. It is assumed that the cone is a mixture of metal and ceramic, and that its properties changes as the power and exponential functions of the shell thickness. After giving the fundamental relations, the stability and compatibility equations of an FGM truncated conical shell, subject to combined axial tension and hydrostatic pressure, have been derived. Applying Galerkin’s method general formulas have been obtained for the critical combined and separate loads of FGM conical shells. The appropriate formulas for homogenous and FGM cylindrical shells are found as a special case. Effects of changing shell characteristics, material composition and volume fraction of constituent materials on the critical combined and separate loads of FGM shells with simply supported edges are also investigated. The results obtained for homogeneous cases are compared with their counterparts in the literature.     

Supersonic flutter prediction of functionally graded conical shells

Aero-thermoelastic analysis of a simply supported functionally graded truncated conical shell subjected to supersonic air flow is performed to predict the flutter boundaries. The temperature-dependent properties of the FG shell are assumed to be graded through the thickness according to a simple rule of mixture and power-law function of volume fractions of material constituents. Through the thickness steady-state heat conduction is considered for thermal analysis. To perform the stability analysis, the general nonlinear equations of motion are first derived using the classical Love’s shell theory and the von Karman–Donnell-type of kinematic nonlinearity together with the linearized first-order piston theory for aerodynamic loading. Then the nonlinear equations of motion are linearized to obtain the linear equilibrium and aeroelastic equations. The equilibrium equations are solved using power series method to obtain the initial stresses induced by aerodynamic and thermal loadings. The results are then used as an input to the aeroelastic stability equations which are finally solved with the generalized Galerkin method. The flutter boundaries are obtained for the FG conical shells with different semi-vertex cone angles, different temperature distributions, and different volume fraction indices.     

The non-linear buckling analysis of cross-ply laminated orthotropic truncated conical shells

In this study, the non-linear buckling behavior of cross-ply laminated orthotropic truncated conical shells under axial load has been investigated. The basic relations of the cross-ply laminated orthotropic truncated conical shells are derived using the von Karman–Donnell-type of kinematic non-linearity. Then modified Donnell type non-linear stability and compatibility equations are obtained and are solved. Finally, the influences of the number and ordering of layers and the variations of the conical shell characteristics on the non-linear axial buckling load are investigated. Comparison with available results is satisfactorily good.     

Nonlinear static and dynamic buckling analysis of functionally graded shallow spherical shells including temperature effects

This paper presents an analytical approach to investigate the nonlinear static and dynamic unsymmetrical responses of functionally graded shallow spherical shells under external pressure incorporating the effects of temperature. Governing equations for thin FGM spherical shells are derived by using the classical shell theory taking into account von Karman–Donnell geometrical nonlinearity. Approximate solutions are assumed and Galerkin procedure is applied to determine explicit expressions of static critical buckling loads of the shells. For the dynamical response, motion equations are numerically solved by using Runge–Kutta method and the criterion suggested by Budiansky–Roth. A detailed analysis is carried out to show the effects of material and geometrical parameters, boundary conditions and temperature on the stability and dynamical characteristics of FGM shallow spherical shells.     

On the vibration and stability of shear deformable FGM truncated conical shells subjected to an axial load

The aim of present study is to investigate the vibration and stability of functionally graded (FG) conical shells under a compressive axial load using the shear deformation theory (SDT). The basic equations of shear deformable FG conical shells are derived using Donnell shell theory and solved using Galerkin's method. The novelty of this study is to achieve closed-form solutions for the dimensionless frequencies and critical axial loads for freely-supported FG truncated conical shells on the basis of the SDT. Parametric studies are made to investigate effects of shear stresses, compositional profiles and conical shell characteristics on the critical parameters. Some comparisons with the various studies have been performed in order to show the accuracy of the present study.     

Free vibration analysis of rotating functionally graded cylindrical shells in thermal environment

The free vibration analysis of rotating functionally graded (FG) cylindrical shells subjected to thermal environment is investigated based on the first order shear deformation theory (FSDT) of shells. The formulation includes the centrifugal and Coriolis forces due to rotation of the shell. The material properties are assumed to be temperature-dependent and graded in the thickness direction. The initial thermo-mechanical stresses are obtained by solving the thermoelastic equilibrium equations. The equations of motion and the related boundary conditions are derived using Hamilton’s principle. The differential quadrature method (DQM) as an efficient and accurate numerical tool is adopted to discretize the thermoelastic equilibrium equations and the equations of motion. The convergence behavior of the method is demonstrated and comparison studies with the available solutions in the literature are performed. Finally, the effects of angular velocity, Coriolis acceleration, temperature dependence of material properties, material property graded index and geometrical parameters on the frequency parameters of the FG cylindrical shells with different boundary conditions are investigated.     

Nonlinear dynamic buckling of orthotropic cylindrical shells subjected to rapidly applied loads

Dynamic buckling of an orthotropic cylindrical shell which is subjected to rapidly applied compression is considered. A nonlinear differential equation of Donnell–Karman type is derived with the initial imperfection taken into account. An energy method is used to obtain the equation of motion which is then solved numerically by means of a Runge-Kutta method. These numerical results show that the critical load is increased over the corresponding static case. An analytical solution is also obtained for the problem of hydrostatic pressure.     

功能梯度材料薄球壳热屈曲问题

研究了由金属和陶瓷组成的功能梯度材料薄球壳热屈曲问题。用张量方法推导得到轴对称球壳稳定性方程。将热本构方程应用到球壳稳定性方程中,得到以位移表示的球壳热屈曲方程组。分别考虑均布外压和温度作用,采用伽辽金法计算分析简支球壳的热屈曲问题,给出薄球壳厚度、物性参数变化、内外表面温差变化引起的临界温度变化趋势和临界压力变化趋势。     

双参数冲击荷载作用下弹性压杆的动力屈曲研究

作用在实际结构上的冲击荷载往往是相当复杂的,冲击荷载形式对结构动力屈曲有较大影响。对双参数冲击荷载作用下的弹性压杆动力屈曲进行研究,采用等价矩形脉冲对荷载进行简化。分别对理想的和初始几何缺陷的弹性压杆冲击屈曲进行分析和计算,并以两端简支和两端固定轴心压杆冲击屈曲作为算例,初步揭示了冲击荷载形式对轴心压杆动力屈曲的影响规律,获得了有价值的结论。     

Influences of elastic foundations and shear deformations on the buckling behavior of functionally graded material truncated conical shells under axial compression

This article presents an investigation on the buckling of functionally graded (FG) truncated conical shells under an axial load resting on elastic foundations within the shear deformation theory (SDT). The governing equations are solved using the Galerkin method, and the closed-form solution of the axial buckling load for FG conical shells on elastic foundations within the SDT is obtained. Various numerical examples are presented and discussed to verify the accuracy of the closed-form solution in predicting dimensionless buckling loads for FG conical shells on the Winkler–Pasternak elastic foundations within the SDT.     

Nonlinear bending and postbuckling of FGM cylindrical panels subjected to combined loadings and resting on elastic foundations in thermal environments

A nonlinear analysis is presented for FGM cylindrical panels resting on elastic foundations subjected to the combined actions of uniform lateral pressure and compressive edge loads in thermal environments. The two cases of postbuckling of initially pressurized FGM cylindrical panels and of nonlinear bending of initially compressed cylindrical panels are considered. Heat conduction and temperature-dependent material properties are both taken into account. Material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction based on Mori-Tanaka micromechanics model. The formulations are based on a higher order shear deformation theory and von Kármán strain displacement relationships. The panel-foundation interaction and thermal effects are also included. The governing equations are solved by a singular perturbation technique along with a two-step perturbation approach. The numerical illustrations concern the postbuckling behavior and the nonlinear bending response of FGM cylindrical panels with two constituent materials resting on Pasternak elastic foundations. The effects of volume fraction index, temperature variation, foundation stiffness as well as initial stress on the postbuckling behavior and the nonlinear bending response of FGM cylindrical panels are discussed in detail.     

Buckling analysis of moderately thick FG carbon nanotube reinforced composite conical shells under axial compression by DQM

A semi-analytical method is presented to study the buckling of moderately thick carbon nanotube reinforced composite conical shells under axial compression. Material properties are assumed to be graded across the shell thickness. In order to derive the equilibrium equations of the shell, first-order shear deformation theory is used. Then, the partial differential equations are transformed to algebraic type by using the differential quadrature method. To validate the results obtained in this study, comparisons are made with the outcomes of previous studies. Finally, the effects of the geometry of the shell, circumferential mode number, volume fraction of the carbon nanotube, and boundary conditions are studied.