Synthesis and Characterization of 1‐Azido‐2‐Nitro‐2‐Azapropane and 1‐Nitrotetrazolato‐2‐Nitro‐2‐Azapropane

1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and sodium azide. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and silver nitrotetrazolate. The highly energetic new compounds ( 1 and 2 ) were characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁴N), elemental analysis and low‐temperature single crystal X‐ray diffraction. 1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) represents a covalently bound liquid energetic material which contains both a nitramine unit and an azide group in the molecule. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) is a covalently bound room‐temperature stable solid which contains a nitramine group and a nitrotetrazolate ring unit in the molecule. Compounds 1 and 2 are hydrolytically stable at ambient conditions. The impact sensitivity of compound 1 is very high (<1 J) whereas compound 2 is less sensitive (<6 J).     

Polymerization of 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione with diisocyanates

4‐(4′‐Aminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( 1 ) was reacted with 1,8‐naphthalic anhydride ( 2 ) in a mixture of acetic acid and pyridine (3 : 2) under refluxing temperature and gave 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( NIPTD ) ( 3 ) in high yield and purity. The compound NIPTD was reacted with excess n‐propylisocyanate in N,N‐dimethylacetamide solution and gave 1‐(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐triazolidine‐3,5‐dione ( 4 ) and 1,2‐bis(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐ triazolidine‐3,5‐dione ( 5 ) as model compounds. Solution polycondensation reactions of monomer 3 with hexamethylene diisocyanate ( HMDI ), isophorone diisocyanate ( IPDI ), and tolylene‐2,4‐diisocyanate ( TDI ) were performed under microwave irradiation and conventional solution polymerization techniques in different solvents and in the presence of different catalysts, which led to the formation of novel aliphatic‐aromatic polyureas. The polycondensation proceeded rapidly, compared with conventional solution polycondensation, and was almost completed within 8 min. These novel polyureas have inherent viscosities in a range of 0.06–0.20 dL g^?1 in conc. H₂SO₄ or DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2861–2869, 2003     

3‐Hydroxy‐2‐[1′‐phenyl‐3′‐(p‐chlorophenyl)‐4′‐pyrazolyl]‐4‐oxo‐4H‐1‐benzopyran as a spectrophotometric reagent for trace determination of tungsten(vi)

3‐Hydroxy‐2‐[1′‐phenyl‐3′‐(p‐chlorophenyl)‐4′‐pyrazolyl]‐4‐oxo‐4H‐1‐benzopyran solution in acetone forms a yellow‐coloured complex with tungsten(vi ) in perchloric acid medium which is extractable into chloroform after equilibration. In this study, tests were carried out on this compound and it was found to be quite stable and to obey Beer’s law. Interactions with various ions were studied and the molar absorptivity, Sandell’s sensitivity and relative standard deviation were also investigated. Job’s method, the mole ratio method and the equilibrium‐shift method were also used. The ratio of metal to ligand was measured using a method that was simpler, more accurate, sensitive, rapid and selective as compared with existing methods. This method is applicable to the analysis of various samples of varied composition.     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

1‐Amino‐1‐hydrazo‐2,2‐dinitroethene – a Hazard Warning

1‐Amino‐1‐hydrazo‐2,2‐dinitroethene ( 2 ) has been observed to spontaneously decompose with considerable violence during storage. Its preparation and handling should be regarded as potentially hazardous.     

Structural,spectroscopic and computational study of 5‐(substituted phenylazo)‐3‐cyano‐1‐ethyl‐6‐hydroxy‐4‐methyl‐2‐pyridones

Ten 5‐(substituted phenylazo)‐3‐cyano‐1‐ethyl‐6‐hydroxy‐4‐methyl‐2‐pyridones were studied (five new compounds) to provide insight into the electronic effects of diverse substituents located at different positions in their phenyl moieties. The structural features of these dyes were examined by combining experimental and theoretical approaches. The crystal structures of two derivatives were revealed by X‐ray crystallography and diverse packing modes owing to different intermolecular interactions (π–π stacking and lone pair–π interactions, as well as hydrogen bonds) were found. A study on lattice energy and energy related to the molecular pairs obtained from their crystal packing was performed. The tautomerism and ionisation of the dyes in ethanol or N,N ‐dimethylformamide solution were rationalised in terms of diazo component substitution pattern.     

6‐Substituted 2‐Aminopurine‐2′‐deoxyribonucleoside 5′‐Triphosphates that Trace Cytosine Methylation

Gene expression is extensively regulated by the occurrence and distribution of the epigenetic marker 2′‐deoxy 5‐methylcytosine (5mC) in genomic DNA. Because of its effects on tumorigenesis there is an important link to human health. In addition, detection of 5mC can serve as an outstanding biomarker for diagnostics as well as for disease therapy. Our previous studies have already shown that, by processing O⁶‐alkylated 2′‐deoxyguanosine triphosphate (dGTP) analogues, DNA polymerases are able to sense the presence of a single 5mC unit in a template. Here we present the synthesis and evaluation of an extended toolbox of 6‐substituted 2‐aminopurine‐2′‐deoxyribonucleoside 5′‐triphosphates modified at position 6 with various functionalities. We found that sensing of 5‐methylation by this class of nucleotides is more general, not being restricted to O⁶‐alkyl modification of dGTP but also applying to other functionalities.     

Synthesis and Characterization of 1‐Nitroguanyl‐3‐nitro‐5‐amino‐1,2,4‐triazole

The synthesis of 1‐nitroguanyl‐3‐nitro‐5‐amino‐1,2,4‐triazole (ANTA‐NQ) ( 1 ) with good yield and high purity is described. DSC analysis showed that the material displays good thermal stability. An X‐ray crystallographic analysis confirms the structure of this material, as well as displays intramolecular hydrogen bonding. A gas pycnometry density for this material was measured to be 1.79 g cm⁻³. The heat of formation of this material was also measured. These data, along with the molecular formula were used as inputs to calculate the detonation velocity and detonation pressure using the Cheetah thermochemical code. The sensitivity of this material towards impact, spark and friction was also measured, as well as its vacuum thermal stability. The 3‐azido derivative 2 was also prepared and its properties are described as well. The above data show that (ANTA‐NQ) may be a high performing material with low sensitivity and good thermal stability.     

Atom transfer radical polymerization of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene

Atom transfer radical polymerization (ATRP) of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene ((R)‐MAMBN) mediated by different amine ligands, copper(I) chloride and ethyl 2‐bromopropionate in different solvents, and reverse ATRP of (R)‐MAMBN were studied. It was shown that optically active polymers were obtained, with poor control of the molecular weights, and low polydispersities. Specific rotation of the polymers increased with increasing molecular weights. By comparison with (R)‐MAMBN, poly((R)‐MAMBN)s exhibits higher specific rotation and a positive Cotton effect. Copyright © 2003 Society of Chemical Industry     

Synthesis and Cytostatic and Antiviral Activities of 2′‐Deoxy‐2′,2′‐difluororibo‐ and 2′‐Deoxy‐2′‐fluororibonucleosides Derived from 7‐(Het)aryl‐7‐deazaadenines

A series of sugar‐modified derivatives of cytostatic 7‐heteroaryl‐7‐deazaadenosines (2′‐deoxy‐2′‐fluororibo‐ and 2′‐deoxy‐2′,2′‐difluororibonucleosides) bearing an aryl or heteroaryl group at position 7 was prepared and screened for biological activity. The difluororibonucleosides were prepared by non‐ stereoselective glycosidation of 6‐chloro‐7‐deazapurine with benzoyl‐protected 2‐deoxy‐2,2‐difluoro‐D ‐erythro‐pentofuranosyl‐1‐mesylate, followed by amination and aqueous Suzuki cross‐couplings with (het)arylboronic acids. The fluororibo derivatives were prepared by aqueous palladium‐catalyzed cross‐coupling reactions of the corresponding 7‐iodo‐7‐deazaadenine 2′‐deoxy‐2′‐fluororibonucleoside 20 with (het)arylboronic acids. The key intermediate 20 was prepared by a six‐step sequence from the corresponding arabinonucleoside by selective protection of 3′‐ and 5′‐hydroxy groups with acid‐labile groups, followed by stereoselective S_N2 fluorination and deprotection. Some of the title nucleosides and 7‐iodo‐7‐deazaadenine intermediates showed micromolar cytostatic or anti‐HCV activity. The most active were 7‐iodo and 7‐ethynyl derivatives. The corresponding 2′‐deoxy‐2′,2′‐difluororibonucleoside 5′‐O‐triphosphates were found to be good substrates for bacterial DNA polymerases, but are inhibitors of human polymerase α.     

Characterization of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine

4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (DANT) was prepared with a 35 % yield from cyanuric chloride in a three step process. DANT was characterized by IR and NMR spectroscopy (¹H, ¹³C, ¹⁵N), single‐crystal X‐ray diffraction, and DTA. The crystal density of DANT is 1.849 g cm⁻³. The cyclization of one azido group and one nitrogen atom of the triazine group giving tetrazole was observed for DANT in a dimethyl sulfoxide solution using NMR spectroscopy. An equilibrium exists between the original DANT molecule and its cyclic form at a ratio of 7 : 3. The sensitivity of DANT to impact is between that for PETN and RDX, sensitivity to friction is between that for lead azide and PETN, and sensitivity to electric discharge is about the same as for PETN. DANT′s heat of combustion is 2060 kJ mol⁻¹.     

Electropolymerization of a new 4‐(2,5‐Di‐2‐thiophen‐2‐yl‐pyrrol‐1‐yl)‐tetra substituted nickel phthalocyanine derivative

A new tetrakis 4‐(2,5‐di‐2‐thiophen‐2‐yl‐pyrrol‐1‐yl) substituted nickel phthalocyanine (NiPc‐SNS) was synthesized and characterized by elemental analysis, Fourier Transform Infrared (FT‐IR), and UV–vis spectroscopies. The electrochemical polymerization of this newly synthesized NiPc‐SNS was performed in dichloromethane (DCM)/tetrabutylammonium perchlorate (TBAP) solvent/electrolyte couple. An insoluble film was deposited on the electrode surface, both during repetitive cycling and constant potential electrolysis at 0.85 V. Resulting polymer film, P(NiPc‐SNS), was characterized utilizing UV–vis and FT‐IR spectroscopic techniques and its electrochemical behavior was investigated via cyclic voltammetry (CV). Spectroelectrochemical behavior of the polymer film on indium tin oxide (ITO) working electrode was investigated by recording the electronic absorption spectra, in situ, in monomer‐free electrolytic solution at different potentials and it is found that the P(NiPc‐SNS) film can be reversibly cycled between 0.0 and 1.1 V and exhibits electrochromic behavior; dark olive green in the neutral and dark blue in the oxidized states with a switching time of 1.98 s. Furthermore, the band gap of P(NiPc‐SNS) was calculated as 2.27 eV from the onset of π–π* transition of the conjugated backbone. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Crystallization behavior of 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol and 1‐palmitoyl‐2,3‐dioleoyl‐glycerol

A model margarine was stored under a temperature fluctuation cycle of 5—20 °C until granular crystals were observed. Using information obtained from the granular crystals, the crystallization behaviors of major triacylglycerols of palm oil, 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol (POP), 1‐palmitoyl‐2,3‐dioleoyl‐glycerol (POO), and their mixtures were then investigated. It was shown that in the model margarine, the POP content in the granular crystals was higher than in their surrounding materials, and the X‐ray diffraction pattern of the granular crystals revealed that they were the most stable polymorph, β. 99% pure POP, POO, and their mixtures were then stored under the above‐mentioned temperature cycle. POP was found to form the unstable polymorph, α, when cooled rapidly from the melt. Within 24 hours transformation into the γ polymorph and then into the β polymorph was observed. POO was shown to transform into the β' polymorph from α. When POP and POO were mixed, the β polymorph did not emerge, instead it was shown that POP and POO were both agglomerated in the mixtures, giving rise to the formation of granular crystals.     

Synthesis and properties of fluorinated polyimides from 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,4,5‐trifluorophenyl)‐2,2,2‐trifluoroethane and various aromatic dianhydrides

A novel aromatic diamine, 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,4,5‐trifluorophenyl)‐2,2,2‐trifluoroethane, containing a pendant polyfluorinated phenyl group, a trifluoromethyl group, and methyl groups ortho‐substituted to the amino groups in the structure was synthesized and characterized. The diamine was polymerized with several aromatic dianhydrides, including 3,3′,4,4′‐biphenyltetracarboxylic dianhydride, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, and 4,4′‐hexafluoroisopropylidene diphthalic anhydride, via a high‐temperature one‐step procedure to afford four polyimides (PIs) with inherent viscosities of 0.47–0.70 dL/g. The PIs exhibited excellent solubilities in a variety of organic solvents. They were soluble not only in polar aprotic solvents but in many common solvents, such as cyclopentanone, tetrahydrofuran, and even toluene at room temperature. The tough and flexible PI films cast from the PI solutions exhibited good thermal stabilities and acceptable tensile properties. The glass‐transition temperatures were in the range 312–365°C, and the 5% weight loss temperatures were all higher than 480°C in nitrogen. The films had tensile strengths in the range 76–99 MPa, tensile moduli of 2.2–2.8 GPa, and elongations at break of 5–8%. In addition, the PI films exhibited excellent transparency in the visible light region with cutoff wavelength as low as 302 nm and transmittance higher than 88% at the wavelength of 450 nm. The PI films showed low dielectric constants ranging from 2.50–2.68 and low moisture absorptions of less than 0.56%. The good combined properties of the PIs mainly resulted from the synergic effects of the different substituents. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Optically Active 4‐Substituted (S)‐2‐Phenyl‐2‐oxazolines

(R)‐4‐Hydroxymethyl‐2‐phenyl‐2‐oxazoline (R)‐ 1 ) was prepared from (L)‐serine. The respective tosylate ((S)‐ 2 ) was converted into sulfides (S)‐ 4 and (S)‐ 5 , and sulfone (S)‐ 6 , useful starting materials for the elaboration of additional chiral centers. A previously reported [ α]_D ²⁵ value for (R)‐ 4 is corrected.     

Copolymerization of 1‐oxo‐2,6,7‐trioxa‐1‐phorsphabicyclo[2,2,2]oct‐4‐yl methyl acrylate and (10‐oxo‐10‐hydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl) methyl acrylate with styrene and their thermal degradation characteristics

Two phosphorus‐containing acrylates of 1‐oxo‐2,6,7‐trioxa‐1‐phorsphabicyclo[2,2,2]oct‐4‐yl methyl acrylate and (10‐oxo‐10‐hydro‐9‐oxa‐10λ⁵‐phosphaphenanthrene‐10‐yl) methyl acrylate were free‐radical‐copolymerized with styrene (St). The r₁ reactivity ratio values (related to the novel acrylates) were 0.342 and 0.225, respectively, and the r₂ reactivity ratio values (related to St) were 0.432 and 0.503, respectively. The thermal stability of the copolymers was tested by thermogravimetric analysis (TGA) in N₂ or air, and the ignitability was tested by measurements of UL‐94 vertical combustion tests and the limiting oxygen index. The results of TGA and combustion tests indicated that the effect of flame retardancy was determined by the nature of the phosphorus‐containing substituent. Compared with the 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide based group, the 1‐oxo‐2,6,7‐trioxa‐1‐phorsphabicyclo[2,2,2]oct‐4‐yl methol based group could enhance the ability of char formation with an antidripping effect. It is concluded that phosphorus‐containing acrylates are potential flame‐retarding monomers for styrenic polymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Discovery of 5′′‐Chloro‐N‐[(5,6‐dimethoxypyridin‐2‐yl)methyl]‐2,2′:5′,3′′‐terpyridine‐3′‐carboxamide (MK‐1064): A Selective Orexin 2 Receptor Antagonist (2‐SORA) for the Treatment of Insomnia

The field of small‐molecule orexin antagonist research has evolved rapidly in the last 15 years from the discovery of the orexin peptides to clinical proof‐of‐concept for the treatment of insomnia. Clinical programs have focused on the development of antagonists that reversibly block the action of endogenous peptides at both the orexin 1 and orexin 2 receptors (OX₁R and OX₂R), termed dual orexin receptor antagonists (DORAs), affording late‐stage development candidates including Merck’s suvorexant (new drug application filed 2012). Full characterization of the pharmacology associated with antagonism of either OX₁R or OX₂R alone has been hampered by the dearth of suitable subtype‐selective, orally bioavailable ligands. Herein, we report the development of a selective orexin 2 antagonist (2‐SORA) series to afford a potent, orally bioavailable 2‐SORA ligand. Several challenging medicinal chemistry issues were identified and overcome during the development of these 2,5‐disubstituted nicotinamides, including reversible CYP inhibition, physiochemical properties, P‐glycoprotein efflux and bioactivation. This article highlights structural modifications the team utilized to drive compound design, as well as in vivo characterization of our 2‐SORA clinical candidate, 5′′‐chloro‐N‐[(5,6‐dimethoxypyridin‐2‐yl)methyl]‐2,2′:5′,3′′‐terpyridine‐3′‐carboxamide (MK‐1064), in mouse, rat, dog, and rhesus sleep models.     

A Highly Regioselective Preparation of 4‐Chloromethyl‐5‐methyl‐2‐aryl‐1,3‐oxazoles

A facile highly regioselective process is described for the formation of 4‐chloromethyl‐1,3‐oxazoles from 1,3‐oxazole N‐oxide/HCl salts. An explanation is presented for the high regioselectivity in deoxygenation‐chlorination using POCl₃ with HCl salts compared to the corresponding free N‐oxides. The method is quite general and the products are isolated by direct precipitation in all cases studied.     

Step‐growth polymerization of 5‐[(9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboximido)‐3‐methylbutanoyl‐amino]isophthalic acid with aromatic diols

cis‐9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboxylic acid anhydride ( 1 ) was converted to imide acid ( 2 ) by reaction with S‐valine. Compound 2 was converted to the acid chloride ( 3 ) by reaction with thionyl chloride and then treated with 5‐aminoisophthalic acid in dry N,N‐dimethylacetamide to obtain 5‐[(9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboximido)‐3‐methylbutanoylamino]isophthalic acid ( 4 ). Direct step‐growth polymerization of this novel chiral diacid monomer 4 with a series of different diols in a system of tosyl chloride, pyridine, and N,N‐dimethylformamide was carried out. The optically active polyesters (PEs) were obtained with good yield and moderate inherent viscosity ranging from 0.23 to 0.48 dL/g. The resulting polymers were characterized with FTIR, ¹H‐NMR, and elemental analysis techniques. The prepared PEs showed good thermal stability up to 320°C as measured by thermogravimetric analysis. Specific rotation experiments demonstrated the induction of optical activity due to successful insertion of S‐valine in the structure of pendant groups. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Microwave‐assisted rapid polycondensation reaction of 4‐(4′‐acetamidophenyl)‐1,2,4‐triazolidine‐3,5‐dione with diisocyanates

4‐(4′‐Aminophenyl)‐1,2,4‐triazolidine‐3,5‐dione was reacted with 1 mol of acetyl chloride in dry N,N‐dimethylacetamide (DMAc) at ?15°C and 4‐(4′‐acetamidophenyl)‐1,2,4‐triazolidine‐3,5‐dione [4‐(4′‐acetanilido)‐1,2,4‐triazolidine‐3,5‐dione] (APTD) was obtained in high yield. The reaction of the APTD monomer with excess n‐isopropylisocyanate was performed at room temperature in DMAc solution. The resulting bis‐urea derivative was obtained in high yield and was finally used as a model for the polymerization reaction. The step‐growth polymerization reactions of monomer APTD with hexamethylene diisocyanate, isophorone diisocyanate, and tolylene‐2,4‐diisocyanate were performed under microwave irradiation and solution polymerization in the presence of pyridine, triethylamine, or dibutyltin dilaurate as a catalyst. Polycondensation proceeded rapidly, compared with conventional solution polycondensation; it was almost completed within 8 min. The resulting novel polyureas had an inherent viscosity in the range of 0.07–0.17 dL/g in dimethylformamide or sulfuric acid at 25°C. These polyureas were characterized by IR, ¹H‐NMR, elemental analysis, and thermogravimetric analysis. The physical properties and structural characterization of these novel polyureas are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2103–2113, 2004